JDK 5 for 64 bit for B1ic installation on windows server 2008 64 bit
Hello to All,
I want to download jdk 5 for X64 ,i have searched lot of time on gooogle and other place but not find for 64 bit.
my one of the client working on windows server 2008 with 64 bit and i want to install integration component(SAP 8.81 PL 00) .
If any one have any link please share in form.
Thanks
Manvendra Singh Niranjan
Hi,
Try to find it into Oracle Archives:
http://download.oracle.com/otn-pub/java/jdk/1.5.0_22//jdk-1_5_0_22-windows-amd64.exe
Similar Messages
-
Best practice for install oracle 11g r2 on Windows Server 2008 r2
Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira -
Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS
Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik -
64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?
Hi,
I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
I downloaded "wls1032_generic.jar" and try to install it by the command below
"java -d64 -jar wls1032_generic.jar"
however I got the message below
Unrecognized option: -d64
Couldn't create the Java virtual machine
Any options about this problem. Where am I making mistake?Hi,
You need to make sure the following things :
1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
Then just run the following command to check if the JVM is 6t4 bit or not:
set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
*$JAVA_HOME\bin\java -version*
3). Now u can run your WebLogic Installer like following:
*$JAVA_HOME\bin\java -jar wls1032_generic.jar* -
CF9 installation on Windows Server 2008 R2 64 bit
Our company is looking purchase CF9 standard edition and install it on a Windows Server 2008 Std. Edition R2 64bit.
Does anyone forsee any problems as far as compatibility is concerned?Not in the slightest - I installed five just the other week
All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
Install extra roles:
Application Server
Web Server (IIS)
Application Development
IIS6 METABASE Compatibility
Install extra Features:
SMTP Service
Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
But the actual install itself was far simpler than CF8 on 2008.
O. -
Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008
Hi ,
I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
j2eesdk-1_4_02_2005Q1
j2sdk-1_4_2_09_windows_i586
j2re-1_4_2_19-windows-i586-p
j2sdk-1_4_2_19-windows-i586-p
But, I don't know which type I should choose to install first.
Thanks for help!Hi Cathal,
Thanks for your help!
But the document of SAP installation says:
If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right? -
OBI11g installation on Windows Server 2008 R2 (64bit)
Hi,
Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
My Situation:
I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
Installed JDK 64bit
Installed Oracle Client 32bit
Then I tried all three options:
1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
Perhaps you have some hints for me.
Cheers
WolfgangNot in the slightest - I installed five just the other week
All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
Install extra roles:
Application Server
Web Server (IIS)
Application Development
IIS6 METABASE Compatibility
Install extra Features:
SMTP Service
Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
But the actual install itself was far simpler than CF8 on 2008.
O. -
I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie -
Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1
Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them** -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product. -
Crystal Reports Server 2008 V1 installation on Windows Server 2008
Hello,
I am trying to install CRS2008V1 on Windows Server 2008 x64 with SQL Server 2008 and IIS 7.0. Installation wizard says that installation is finished succesfull but I cannot access CMC Console and InfoView. Is there anything which shuld be done more? CRS2008 installation on Windows 2003 was trouble free. I'm very confused now... Anyone can help me?
Regards,
Seb.I had similar issues. My resolution was...
- In IIS Manager, create a new Application Pool called "Classic .NET AppPool"
- For that app pool, set the managed pipeline mode to "Classic"
- with that new app pool selected, click on View Applications in the right-hand panel
- make sure that you see all of the Business Objects applications listed, if not...
- click the Remove Filter link in the top panel
- open each Business Objects related application and assign it to the new app pool
You may need to do an iisreset at that point, but that cleared up the issue for me. -
BPC Installation on Windows Server 2008
Does anyone know if SAP BPC version 7.0 can be installed on windows server 2008?
Hi Harry,
The installation of BPC on the Microsoft platform is tricky enough that for any business-related purpose, you should rely on the guidance of the specialists who do installations. They will tell you that right now the Windows Server 2003 platform is really the only way to go, and as someone who has worked on these, I can tell you that it is crucial to reduce the number of new platform choices and/or chances for bugs/glitches/changes.
To learn more about the process, you should go to the Technical Installation class, which used to be RABPC7 on the 5.1 version. It might still be the same course number.
If you'd like a taste of all of the parts of the process involved, there is a document on the SDN called "How to Perform a Dual-Server BPC for Microsoft Install". It doesn't cover everything, but it will give you a flavor for the process.
In any case, I would strongly recommend that you don't even look at Win2K8 until they update BPC with it.
Sidenote: SQL 2008 is supported as of 7.0 SP3, I think and we've been using it on a DEV environment without any issues so far. -
OBIEE installation on Windows Server 2008
Does anyone have OBIEE running on Windows Server 2008? We bought 2 new Dell servers and they no longer sell Windows 2003 licenses. I know only the latest version 10.1.3.4 is supported and only on a 32-bit emulation. I don't think Hyperion Reporting is supported for Windows 2008 which we also planned on putting on the servers.
This isn't a very helpful response to your question, but if the software cannot be run under Server 2008, you do have the option of installing it into a VMWare image on that server, and mapping that image as an IP address, much the same as Oracle's BIC2G image. Not an ideal solution, I know.
-
Oracle XE installation in Windows Server 2008
Hi all,
I need to install the Oracle XE version on a Windows Server 2008 but I'm not beeing successfully... I already reinstalled it 3 times, tried all solutions I could find all over the internet but still it doesn't work so I was hopping that someone out there could help me.
This is my current configuration:
===========
LISTENER.ORA:
===========
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
===========
SQLNET.ORA:
===========
SQLNET.AUTHENTICATION_SERVICES = (NONE)
===========
TNSNAMES.ORA:
===========
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
===========
result of "lsnrctl services" command:
===========
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-NOV-2010 00:59:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
===========
result of "tnsping xe" command:
===========
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-NOV-2010 01:00:29
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NA
ME = XE)))
OK (10 msec)
When I try to access it thru the web (http://127.0.0.1:8081/apex) it gives a unable to connect error page.
When I try to connect to sqlplus using "sqlplus / as sysdba" it says:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Nov 4 01:03:45 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
I don't know what else to do and any hint would be very much appreciated.
Thank you!C:\>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CG_BOOST_ROOT=C:\Program Files (x86)\Embarcadero\RAD Studio\7.0\include\boost_1_39
CLIENTNAME=ROSS_01-PC
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=VALKYRIE
ComSpec=C:\Windows\system32\cmd.exe
DXVCL=C:\Dev\Vcl\Developer Express.VCL
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
local=LISTENER
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\VALKYRIE
NLS_LANG=American_America.we8iso8859p15
NUMBER_OF_PROCESSORS=8
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORACLE_SID=xe
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Program Files (x86)\Embarcadero\RAD Studio\7.0\bin;C:\Users\allaccess\Documents\RAD Studio\7.0\Bpl;C:\W
indows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Program Files\
Microsoft\Exchange Server\Scripts;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;c:\Progr
am Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;c:
\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\M
icrosoft SQL Server\90\DTS\Binn\;C:\Dev\Vcl\Developer Express.VCL\Library\Delphi14;C:\Program Files (x86)\Java\jre6\bin\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1a05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PUBLIC=C:\Users\Public
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=RHDEVELOP.LOCAL
USERDOMAIN=RHDEVELOP
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows -
Issue with Oracle MTS installation in windows server 2008
Hi Team,
Yesterday, I have installaed oracle client version 11.1.0.7, selected microsoft transaction server option and installed it in my middle tier server.
Start->program->Oracle home11g-> (Searched for oracle mts, its not available) It seems oracle client version needs ODAC to be installed (Is it correct? )
I have downloaded from oracle site. But, its throwing an error like the file is not in proper format.
1 Any special settings needs to be done for installing the MTS in windows server 2008?
2. I need to create a service in MTS to point to my database server?
3. Please share me some relative links on the same.
4. I can see MTS recovery services is running in my machine.
5. Previously, I have installed Oracle 10G client and removed it and am trying with oracle 11g. Just I have uninstalled the application and I didnt do anything. Do we need to remove anything in the registry.
This issue is very critical for me. Please share your thoughts.
Thanks and Regards,
Venkatesan Prabu .JI have the same situation. Could you please share your experience if you resolve it? Thanks.
Maybe you are looking for
-
Windows 8.1 Pro and hppiw.exe
Hi, I'm trying to install on my new PC (Windows 8.1 Pro 64bit) the drivers needed to use an Officejet Pro K850 printer installed on our LAN. From HP website I downloaded hppiw.exe as suggested but I cannot make it run. After double-click it starts to
-
Manual Check Deposit Slip Number? in FF68
Hi Team, Can you please suggest me, can we assign the Check Depoist Slip, In FF68, I see the Group name is freely definable, as it is you can print deposit list separtly per group name. Now My customer what to assign numbe to every Check deposit slip
-
Custom Tools panels - designed for vertical screens? [in interface jungle]
Hi! (hi Rufus Deuchler ) This is a really cool feature. But why can not I stick the toolbar vertically on the bottom or top? So as the control bar? Why all this Ai interface is not intended for displays and vertical work? I have a wide monitors but s
-
Does you Mail.app crash several times every day, too?
This application crashes very often. Every 5-10 minutes... The problem still exists after update to 10.10.1. Do you know the reason of this unstability? Tomasz Below example: Process: Mail [560] Path: /Applications/Mail.app/Conte
-
Postgres BLOB java.lang.AbstractMethodError
I get this error everytime I try to call ps.setBinaryStream(...); I am using Postgres version 8.3. java.lang.AbstractMethodError: org.postgresql.jdbc3.Jdbc3PreparedStatement.setBinaryStream(ILjava/io/InputStream;)V at com.cpsoft.mynot