JEditorPane can't display certain

I'm trying to get certain unicode characters like "\u1200" to display in
a JEditorPane that I've set up to display text/html but all I see is a box like character "[]".
What should I do? Set font doesn't work.
I don't know what else to try.

The character that I'm trying to display is Amharic. "\u1200" is the first character in the Amharic alphabet. The font is installed in my system. The encoding is UTF-8 because I've been able to sucessfully save the characters to a file that way and read them back. I confirmed this by displaying the html file I saved in Internet Explorer. I just have problems displaying them in JEditorPane and JTextArea when I can't or don't use the setFont method to speifically set the font of these components to the font I'm trying to display. In this case I can't because it's a JEditorPane that I've set to display text/html. The unicode range is 1200-137F.
I've read the links that you posted and I don't see any solution proposed. You hinted at more stuff
I need to do under windows. I've tried this both under windows and Linux without success. Do I have to
do anything with the font.properties file and if so then I really need help there.

Similar Messages

JEditorPane can not display the applet contained in a html

We know that class JEditorPane can be used to display Html pages. but it has limitation. When a Html page contains Applet, it can not display the applet! Does anyone know if there's any solution for this problem?

Hi, i do the 'CREATE_TEXT', after the PO created,   the PO created correctly except the Long Text.
THE CODE:
*********************1*********************
    CALL FUNCTION 'BAPI_PRODORD_CREATE'
      EXPORTING
        orderdata    = wa_po
      IMPORTING
        return       = rt
        order_number = aufnr
        order_type   = otype.
Then i got a AUFNR,
**********************2**********************
CONCATENATE sy-mandt aufnr INTO t_name.
      CALL FUNCTION 'CREATE_TEXT'
        EXPORTING
          fid         = 'KOPF'
          flanguage   = 'E'
          fname       = t_name
          fobject     = 'AUFK'
          save_direct = 'X'
          fformat     = '*'
        TABLES
          flines      = it_text
        EXCEPTIONS
          no_init     = 1
          no_save     = 2
          OTHERS      = 3.
and SY-SUBRC is 0.
the long text also generated, but can not displayed on the CO03

Urxvt can't display certain Unicode arrow characters

For some of the arrow characters in Unicode, specifically the codepoints 2900 to 2AFF, urxvt shows slim boxes, but for other characters it works.
I am using a font that supports the glyphs, gnu unifont from the bdf-unifont package.
Here is my .Xresources and Urxvt compile options
*background: #002b36
*color0: #073642
*color1: #dc322f
*color10: #586e75
*color11: #657b83
*color12: #839496
*color13: #6c71c4
*color14: #93a1a1
*color15: #fdf6e3
*color2: #859900
*color3: #b58900
*color4: #268bd2
*color5: #d33682
*color6: #2aa198
*color7: #eee8d5
*color8: #002b36
*color9: #cb4b16
*cursorColor: #93a1a1
*fadeColor: #000000
*fading: 20
*foreground: #93a1a1
*pointerColorBackground: #586e75
*pointerColorForeground: #93a1a1
URxvt*boldFont: -*-Unifont-*-*-*-*-*-*-100-100-*-*-*-1
URxvt*boldItalicFont: -*-Unifont-*-*-*-*-*-*-100-100-*-*-*-1
URxvt*borderLess: false
URxvt*buffered: true
URxvt*cursorBlink: true
URxvt*font: -*-Unifont-*-*-*-*-*-*-100-100-*-*-*-1
URxvt*hold: false
URxvt*intensityStyles: false
URxvt*iso14755: false
URxvt*iso14755_52: false
URxvt*italicFont: -*-Unifont-*-*-*-*-*-*-100-100-*-*-*-1
URxvt*letterSpace: 1
URxvt*mapAlert: true
URxvt*mouseWheelScrollPage: true
URxvt*perl-ext:
URxvt*perl-ext-common: default,matcher,selection-to-clipboard,theme-switch
URxvt*print-pipe: cat > $HOME/$(echo urxvt.dump.$(date +'%Y%M%d%H%m%S'))
URxvt*saveLines: 0
URxvt*scrollBar: false
URxvt*scrollBar_floating: false
URxvt*scrollBar_right: false
URxvt*scrollTtyOutput: true
URxvt*scrollWithBuffer: true
URxvt*scrollstyle: plain
URxvt*secondaryScreen: true
URxvt*secondaryScroll: true
URxvt*urgentOnBell: false
URxvt*url-launcher: /usr/bin/firefox
URxvt*utmpInhibit: false
URxvt*visualBell: false
Xft.antialias: 1
Xft.autohint: 0
Xft.dpi: 107
Xft.hinting: 1
Xft.hintstyle: hintfull
Xft.lcdfilter: lcddefault
Xft.rgba: rgb
rxvt-unicode (urxvt) v9.21 - released: 2014-12-31
options:perl,xft,styles,combining,blink,iso14755,unicode3,encodings=eu+vn+jp+jpext+kr+zh+zhext,fade,transparent,tint,pixbuf,XIM,frills,selectionscrolling,wheel,slipwheel,cursorBlink,pointerBlank,scrollbars=plain+rxvt+NeXT+xterm
Anyone have any idea what's going on?

I can confirm the odd character display. Xterm will display the problem Unifont characters, but there are column alignment problems at all but a few point sizes. Many of the glyphs require two columns, but I don't know what difficulties that presents for font designers or terminal emulator programmers.
Very few monospace fonts include these seldom used arrow symbols. If you truly need the arrows, you might try Everson Mono or Code2000 from the AUR. They include some of the glyphs in the problem range.

Safari 5.1 can't display certain PDF files

Dear Apple fans.
Perhaps someone can put me on the right track since I am nearly loosing my sanity. Last month I downloaded my E-statement from a bank without any problems. These statements require an Adobe Viewer plugin to display in the Safari window. PreView just will not do it. This month for some reason it no longer works.
All that I can think of that changed is that I routinely downloaded various Apple software updates. And I can't tell exactly what was updated but I think to remember that my Mac OS was previously 10.6.7 while it is now 10.6.8. I am not sure if Safari was also from a previous version. The current installed version is 5.1.
Testing so far:
I removed ALL versions of Adobe including the famous plugins in HD/Library/Internet Plug-Ins as well as the same in User/Library/...
I reinstalled Adobe 9.4 which I had previously installed and which worked.
Checked presdence of new plugin --> OK, but no success when trying to view the statement.
I tried the same approach with Adobe X. Prior to that removing all files from the previous Adobe 9 installation but also here no success.
However, when dragging Adobe formatted files into the Safari window they are displayed OK.
Any suggestions perhaps from people who design the web pages for banks what other plugin might be required? The message I get is always the same: "Missing Plug-In" and when I click on "details" I am directed to the Adobe X download site.
Your comments are much appreciated.

These statements require an Adobe Viewer plugin
That's going to be a problem unfortunately, with Safari 5.1
Read here > Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
A workaround according to Adobe is to use another browser.
I personally have found that Firefox works just fine.

Firefox not displaying certain symbols

I can't display certain symbols on Firefox.
Example: <code><span>&equiv;</span></code> does not show anything on the page I'm working on. However, a symbol like <code> <span>&rsaquo;</span> </code> would show.
I discovered a hack that displays the symbol by changing the tag. <code><h4>&equiv;</h4></code> with an h1, h2 tag and so on, it will display the symbol. This hack, however is semantically incorrect and I don't want it in my site just so the symbol can display on Firefox. My site already has the <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> just as this one.
Any suggestions?

Okay, so this is what I did: I took the whole source code of that page http://en.wikibooks.org/wiki/Unicode/Character_reference/2000-2FFF which displays all the symbols correctly, but as soon as I changed the symbol tag from td to span it vanished. So it looks that when wrapped on some tags, the symbols won't display.
A little more information, I'm working on a Wordpress theme, but I did a plain HTML page with the same results. The symbol displays on Safari, Chrome and Opera, I'm yet to try it on IE.

Finder can not find and display certain files. Why? Any fix,please?

I've discovered to my surprise that Finder can not find and display certain files. Computer is Mac book OS X (10.6.8)
No matter what Finder settings I use, there are files which it can not detect and display.
Here are just some examples of files sitting in the HD but Finder can not display them:
Located in preference panes :
fibre channel 1.7
Located in :    /Library/StartupItems/BRESINKx86Monitoring
BRESINKx86Monitoring
FxLicenseManager
Located in    /Library/StartupItems/FxLicenseManager
EAP8021X
Located in    /System/Library/PrivateFrameworks/EAP8021X.framework
The questions:
What to make of this inability of Finder to ,well, find? (again - I tried all possible settings of Finder!)
Is there any way to fix it?
Thanks for any competent suggestion!

Well, guys,
Interesting suggestions but the problem remains -Finder (aka Spotlight) is not capable to find certain files.Period.
I consider it as a fault of the system because in comparison, a search facility of a plain Windows based machine is capable to dig out and display any file, no matter now deeply hidden...
As far as the suggestion above by softwater goes , well, I've used the additional foptions extensively and nothing produced the result needed -that's why I created this discussion.
If someone still believes that using Finder with all its options is good enough, here is a test for you to perform on your own Mac:
-Open /Library/StartupItems/ and have a look inside - most likely you have a bunch of items. Write down the names of one or two of them. For this test I've chosen
FxLicenseManager located in    /Library/StartupItems/. You can use any file you want grom this location...
- Then go to Finder and set it to display everything in Library of the HD. Remember - for this test you pretend you don't know any file name in this folders.
If the Finder works properly it shall display folders of Library >Startup items with all stuff inside, including the FxLicenseManager file I used for this test.
Finder displayed nothing. It is obvious that for Finder, certain locations are off limits. That's why I consider Finder as a faulty.
Of course if someone can set the Finder's options to do the above search and succeed, I'll be glad to try ...:-)
At this point, what I gather from this discussion is that :
1. Finder (Spotlight) feature is not to be trusted,despite number of fancy but rather useless options.
2. If you need to really find everything usually not displayed by Finder you better get real searching software.

How can i display Waveform chart in a subpanel using Vi templates.

Hi All
I am new to Labview hence need some help. I am trying to develop an application which reads some data from a Wireless Sensor Network (WSN). The WSN consists of base station connected to the USB port which recieves data from other sensor nodes. The data comes in a certain format. Node name, temperature reading, humidity reading etc. I want to read the data from the serial port and based on the Node name, i want to display the information for each node in s separate window or subpanel etc. So if a new node is detected then a new window is created for that node. Since all the nodes have the same sensors on board i only need a one template. I can read the data using the serial port, parse the data to detect which node it is and also what the sensor readings are. I have created a template VI for the sensor node. I am having problems in displaying the template VIs in a subpanel. I can succesfully display a Waveform graph in the subpanel but i am having problems in displaying a waveform chart in the subpanel. I can see the actual waveform chart in the subpanel, but i cannot see the plot. Would be greatful if someone could point out what i am doing wrong here.
Many Thanks
Raza
Solved!
Go to Solution.
Attachments:
template_graph.vi ‏16 KB
graph_template.vit ‏11 KB

Hi All
I think i have solved the problem. It seems like i was running the Vi in a loop. I have taken the Run Vi outside the while lopp and this works fine. Also i need to close the reference at the end.
Raza

How can i display 5,10,15... records @ a time from a table in a DB?

well, i have developed a JSP application that shows ALL the employees in a certain department... the problem is when the number of employees increase the jsp page bcomes very, VERY long...
how can i do this by showing at least 20 records at a time... also like other jsp pages that i see that they have page numbers in the page above to show the other records... like...
page 1 20 records...
page 2, another 20...
... so on and so forth...
please help...
:]

Don't loop through the whole result set at once, just show records 1 to n....where n is whatever value you think creates a nice sized page. If you cache the results you can then display n+1 to 2n when the user hits a "more" link at the bottom of the page...and so on.
btw...caching may not be the best way to store your data, depends on the size of the resultsset, you may want to re-run the query each time and/or optimise the query to only fetch back the n results you want each time.
J.

Firefox is displaying certain characters/sentences incorrectly

Firefox has for a while now, displayed certain words in gibberish.
The majority of text on a site is fine, however i come across certain websites where the headers/text in boxes (dynamic text? i don't have a clue) displays in an unreadable language, but it appears that the spell checker plug-in I have installed seems to recognise words spelt incorrectly in this gibberish.
I have looked at the settings, and the default text is set to times new roman, which every computer seems to have.
Please see the link to see my problem.
Any advice greatly appreciated.
Matt

Your screenshot didn't attach properly, only the thumbnail shows.<br />
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you choose an unique name for the image to avoid problems (an image with the same name may already exist). There should be a delete X on the image if the image is uploaded correctly.
Such issues can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.<br />
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.<br />
A possible test is to zoom out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
You need to uninstall (remove) all variants of that not working font to make Firefox use another font.

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Firefox 4 not displaying certain content

On the below website, since firefox 4 was released it was working fine, but since firefox 4, it doesnt display certain text, please see below the two links provided of pictures, one displaying a picture from Microsoft IE, and Firefox version.
Microsoft IE (How it should display): http://img864.imageshack.us/img864/7798/ieimg.png
Firefox (It's not displaying certain text):
http://img841.imageshack.us/img841/2622/firefoximg.png
Now is this due to the HTML used or the browser?
Thanks

This is a little hard to diagnose from the pictures. I'm guessing that the box comes up blank at first and then is filled in from the server in real time after you make a selection from the drop-down control. Is that how it is supposed to work?
(Edit: I assumed the box was blank, but in case it is "white on white", you could try selecting that area, which would make it possible to see whether anything is there.)
Is there any part of the site that can be used without a login that demonstrates the same problem? (I went to the demo, but it's just a Flash movie...)
If not, you could check Firefox's Error Console (Tools menu). First click Clear, then reload the page that you want to use. There may be lots of warnings, but is anything marked with the "X" error symbol? Then click the link or button or drop-down that should populate the information. Check the Error Console for new errors. Although it's rare that you could fix such errors from your end, it might be possible, or you could report them to the site.

Safari not displaying certain icons and background music while viewing

I'm new to Mac OS.
I tried to view a website I used to visit but the 27" iMac wouldn't display certain icons and the background music when Windows 7 could.
I recalled when I was in the Windows 7, the internet Explore brought down a small yellow bar from the top page asking me whether I'd like to install the ActiveX so that the site can play back the backgound music, java script and so on.
I downloaded and tried the Google's Crome and the Firefox browsers but they were the same as the Safari.
Is there a remedy for it?
Your help is greatly appreciated.

HI,
If you could post a link to the site it would help.
From the Safari Menu Bar click Safari / Preferences and select the Security tab.
Where you see: Web content: Make sure the top 3 buttons are checked. Relaunch Safari and try that site.
If you would take a moment and click My Settings on the right side of this window and tell us which Mac OS X version your iMac is running and which version of Safari, that helps us trouble shoot for you. Thanks!
Carolyn

Mail not displaying certain messages

Mail is suddenly not displaying certain messages in mailboxes. I can see and select the message in the center pane, but when I click on it to display, I get the "Loading" text and the spinner. This continues without resolution, though sometimes the messages will display after quitting Mail and/or rebuilding the Mailbox.
It is not random messages that do this, but always the same ones that refuse to display. But they will display sometimes after a rebuild, so I know they aren't gone.
Some have image attachtments, others do not.
This just started this morning, following running Disk Utility to repair some HD corruption last night. Prior to that, Mail (and Safari) had been running very slowly for about three weeks.
I have already repaired permissions on this drive.

Acutab,
I had the same problem. I took your advice and rebuilt the mailbox-voila. The problem was solved. I have also noticed Safari running slow. I will try and run Disk Utility

How to create an array in one field and have another field display certain elements from that array?

I am making a form in Acrobat XI pro.
In one text field, I created an array of several elements. I want other text fields to display certain elements from that array. For instance, one field should display the 3rd element, another field should display the 13th element, etc.
The Javascript for making the array is very long, and so I don't want to have to re-calculate the array every single time (in order to reduce rendering time when I open the form on an iPad). This is why I'd like to only have to create the array once, and simply refer to it throughout the form.

What code are you using to update the array currently? Are you completely rebuiding it when an element changes, or just changing specific elements for certain fields? I'm still not sure what exactly you are trying to do, but something like this in a document level script will create your array:
var myArray;
// Call 'updateArray' to initialize array
updateArray();
function updateArray() {
     // Code here to create/update array
     myArray = new Array();
     myArray[0] = "Value 1";
     myArray[1] = "Value 2";
     myArray[2] = "Value 3";
Then, for each field that needs to update this array, you can add a call to 'updateArray()' in the appropriate event. This will rebuild the array completely; if you just want to update specific elements, then you can access them directly.

Displaying certain messages by e-mail

Is it possible to display certain e-mails by e-mail instead of name, if that makes sense? I am forwarding e-mails from a hotmail account and since it is registered under the same name as my mail account, it displays my name in the from section when I want it to display my e-mail. Thanks.

I don't think this is something you can control by account.
If you are just trying to keep the messages separate so you can identify them, then you can create a new mail box, and build a message rule that says if the message is from a certain address to move the message to the new mailbox.

JEditorPane can't display certain

Similar Messages

Maybe you are looking for