Jexport results not reliable

Hi,
We like to use the jexport function to move data across our applications, but it does not appear to be completely reliable. To test - I moved one of our applications to the development environment and started running the same jexport script over and over (20 times only launching after the previous script finishes). Every so often - after maybe 5 or so runs - the export data set is missing some records or we have a record or two where the sign (debit/credit) is flipped. I have tested on different applications and see the same issue. The dataset being produced are pretty small (500k to 1mb) The results and pretty consistant - you get good data about 80% of the time, and about 20% of the time the data set is missing some records or you have a sign flip on a record or two. Has anyone ever seen this before and can you provide any suggestions on resolving? Our outlines are very large (cubes are huge - cube size over 100k) and reports scripts take a very long time to export slices of data where the jexport can run very fast. Any help would be appreciated.
Thanks!

I used jExport quite a bit on different versions and never had a problem with it. You might go to the EssbaseLabs blog and post the question there Matt and Toufic are primary contributors to that blog and Toufic created the jexport CDF. I'm am guessing you don't have a 100k cube was that supposed to be 100 gig? That would be a large cube. 100k would be tiny.

Similar Messages

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

I have IMAP mail. My sent messages do not reliably show up in Sent mail. Why?

I have IMAP email. My sent message do not reliably show up in Sent Messages. Is this a common problem and is there a fix?

Hi rgw1130,
I am sad to hear about the screen on your phone. If you do not have Back Up Assistant set up, then all your contacts will not sync. Have you checked with your Gmail account to see if your contacts are there? Keep us posted.
Thanks, BobbyS_VZW
Follow us on Twitter @VZWSupport

Results not displayed when driling across

Dear all,
We have just upgraded succesfully to BW 7.31 (SP12).
We now have observed a strange behavior in BEX queries.
We have reports for which we suppress results in BEX. This is a general setting.
Now, users have observed, that when they take 0CALMONTH into the report and drill this across and they set 0CALMONTH to "display ALL results, these results are not being displayed.
But when drilling 0calmonth DOWN, the results are being displayed.
Furthermore, when I select the option "show results with more than one value", then I get results displayed.
I have checked and reproduced this behavior in our new 7.31 environment and compared it towards the old environment(luckily we have had a sandbox for emergencies, which is still on the elder release (7.2x)), and there it works fine. Result rows are being displayed in drill across as well as in drilldown.
Our reports are being shown in the BI Portal.
So tried running the query directly in BEX. I still get that behavior with results not being displayed.
I then tried to run the report in RSRT and - surprise, surprise - here it behaves correctly.
Has anyone an idea, how we can "restore" the "normal" behavior?
Regards
Greg

Hi Greg,
Can you clarify , have you seen this issue before upgrade ? or only after upgrade and in which system you are trying this report that means either production, quality or development. If you are facing the issue only after upgrade then you have raise OSS note to SAP team, they will give you the permanent fix. later you will move the changes to via transport from one system to other system.
If you have any queries, please get back to me.
Thanks,
Premalatha.C

SSDP discovery on Windows Store App not reliable

Hi,
I am having problem implementing SSDP discovery in windows 8 store program. Below is the code:
public async Task SearchForDevices()
var socket = new DatagramSocket();
socket.MessageReceived += async (sender, args) =>
Debug.WriteLine("Received data" + DateTime.Now);
DataReader reader = args.GetDataReader();
uint count = reader.UnconsumedBufferLength;
string data = reader.ReadString(count);
Debug.WriteLine(data);
var response = new Dictionary<string, string>();
foreach (
string x in
data.Split(new[] {"\r\n", "\n"}, StringSplitOptions.None))
if (x.Contains(":"))
string[] strings = x.Split(':');
response.Add(strings[0].ToLower(), x.Remove(0, strings[0].Length + 1));
Device device = await GetXml(response);
Debug.WriteLine("Device found");
if (DeviceFound != null)
DeviceFound(this, new DeviceFoundEventArgs(device));
await socket.BindEndpointAsync(null, "");
HostName hostName = new HostName("239.255.255.250");
socket.JoinMulticastGroup(hostName);
string message = "M-SEARCH * HTTP/1.1\r\n" +
"HOST: " + hostName.DisplayName + ":1900\r\n" +
"ST: upnp:rootdevice\r\n" +
"MAN: \"ssdp:discover\"\r\n" +
"MX: 3\r\n\r\n";
DateTime start = DateTime.Now;
TimeSpan interval = new TimeSpan(0, 0, 30);
Debug.WriteLine(start);
IOutputStream stream = await socket.GetOutputStreamAsync(hostName, "1900");
var writer = new DataWriter(stream) { UnicodeEncoding = UnicodeEncoding.Utf8 };
writer.WriteString(message);
await writer.StoreAsync();
await Task.Delay(1500);
This code is not reliable at all. About 50% times it can't find a connected device while other discover can find. But sometimes it works.
My network sniffer (SmartSniff) sometimes can't even capture its SSDP request even though I have made the call many times.
I don't think this is an async problem since it does work occasionally. Please help me. Thanks!

Hi Jeff,
I have an additional question to this thread.
I try to share code between WinRT and Windows Phone 8 using similar code.
Starting on Windows Phone 8 I ommited the following lines:
await socket.BindEndpointAsync(null,
socket.JoinMulticastGroup(hostName);
This worked fine on the Phone. MSDN mentions for BindEndpointAsync,
that GetOutputStreamAsync also leads to a binding.
I could receive answers. but when I tried to use this on WinRT/Windows Shop I did not receive anything. I had to put in the two lines of code from above.
This is not how it is supposed to be, right?
Stefan

10.5 server: could not reliably determine the server´s fully qualified doma

I bought mac 10.5 server unlimited clientes, yesterday I tried to install the software 3 times and never worked (from basic to advanced apple preconfigurations). I had the carrier support yesterday to verify that it is not a problem of the link.
the server has static IP, manually asigned.
server admin: computer name www.MMM.com, local hostname: www, network interface: ethernet (0), ipv4, add 201.122.etc.etc) dns name: dsl-201-122-63.etc !here LEOPARD is taking the address from the DSLÑ provider,!!!!! and I dont know how to change, but the address is entered manually in the network preferences!!!!!.
I go to admin server: server name: www.MMM.com, services: DNS and WEB : ON
DNS: Zones; www.MMM.com, type: primary
Homepage: Service: www.MMM:com:80
(also, I tri8ed with A redord www, type machine, value: 201.122.etc.etc)
WEB: enabled domain name www.MMM.com address (any or 201.122.etc.etc), port 80,webserver
alias: MMM.com, web services enabled: all.
also enabled default address any, port 80
stop, and start web service.
error log:
httpd: aprsockaddr_infoget() failed afor www.MMM.com
httpd: could not reliably determine the server´s fully qualified domain name, using 127.0.0.1 for server name..
any idea about how to correct that? I tried also the new installation, formating the disk, and the server software is not configurating the server correctly)the easy and advances installation are not working correctly).
thanks a lot
Alberto

ok,
I formated the MAC server for 4th time, installed again the server software, then I went for the Basic configuration. then entered the adress manually, then you have to delete the DNS entry (set it in blank), then in the next window enter the NS (which is the server name). then continue the installation.
after starting the web service is running and it is resolving address.then you can upgrade to the advanced configuration and install the other services.
in that order the www is resolving the address.

Tunneling result not OK,

Hi,
What can you tell me about the following exception that I get
trying to call a bean on Weblogic 6.1. My program tries to take the connection
for several minutes and then java console shows the exception below.
The problem doesn't occur when I take the connection from the
same network where Weblogic is located.
Can this problem be fixed with service packs?
Could oracle8 have something to do with the problem?
I don't know whether this helps anything, but it seems to me like the problem
would have popped up by itself in the last times. With 'by itself' I mean that
I haven't commited any changes what so ever to weblogic configuration, but still
it has stopped working.
The exception:
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
'15'
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
at
weblogic.rmi.cluster.EntityRemoteRef.privateInvoke(EntityRemoteRef.java:144)
at weblogic.rmi.cluster.EntityRemoteRef.invoke(EntityRemoteRef.java:115)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy10.calculator(Unknown Source)
at com.util.Loader$2.run(Loader.java:811)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id: '15']
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy10.calculator(Unknown Source)
at com.util.Loader$2.run(Loader.java:811)
DEBUG util.Loader run:818 - ...model loading from the db in a thread
done in 297828 ms!
<16.7.2002 21:56:56 EEST> <Error> <HTTPClientJVMConnection> <
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
'15'
at
weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:406)
at
weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConnection.java:296)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
-Ohto

Installing sp3(WLS 6.1) should get rid of this for you.
"Ohto Rainio" <[email protected]> wrote:
>
Hi,
What can you tell me about the following exception that I get
trying to call a bean on Weblogic 6.1. My program tries to take the connection
for several minutes and then java console shows the exception below.
The problem doesn't occur when I take the connection from the
same network where Weblogic is located.
Can this problem be fixed with service packs?
Could oracle8 have something to do with the problem?
I don't know whether this helps anything, but it seems to me like the
problem
would have popped up by itself in the last times. With 'by itself' I
mean that
I haven't commited any changes what so ever to weblogic configuration,
but still
it has stopped working.
The exception:
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id:
'15'
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
at
weblogic.rmi.cluster.EntityRemoteRef.privateInvoke(EntityRemoteRef.java:144)
at weblogic.rmi.cluster.EntityRemoteRef.invoke(EntityRemoteRef.java:115)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy10.calculator(Unknown Source)
at com.util.Loader$2.run(Loader.java:811)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id: '15']
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy10.calculator(Unknown Source)
at com.util.Loader$2.run(Loader.java:811)
DEBUG util.Loader run:818 - ...model loading from the db in a thread
done in 297828 ms!
<16.7.2002 21:56:56 EEST> <Error> <HTTPClientJVMConnection> <
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id:
'15'
at
weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:406)
at
weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConnection.java:296)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
-Ohto

"Tunneling result not OK" error

With Weblogic 6.1SP1 on Windows 2000, I see the following error once in a
while.
At the client, I get the following:
-----------client-side error stack begin-------------
weblogic.rjvm.PeerGoneException: ; nested exception is:
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id:
'18'
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD', id:
'18'
at
weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPCli
entJVMConnection.java:406)
at
weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConne
ction.java:296)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
----------client-side error stack end-----------------
Meanwhile, at the server, the wl-domain.log has the following stack trace:
----------server-side error stack begin-----------
####<Nov 11, 2001 7:11:20 PM CST> <Error> <ConnectionManager> <[Hostname]>
<[Managed Server Name]>
<ExecuteThread: '14' for queue: 'default'> <> <> <000000> <>
java.rmi.UnmarshalException: Incoming message header or abbreviation
processing failed ; nested exception is:
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
Start server side stack trace:
java.rmi.UnmarshalException: Incoming message header or abbreviation
processing failed ; nested exception is:
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
at
weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.j
ava:182)
at
weblogic.rjvm.MsgAbbrevInputStream.readMessageContext(MsgAbbrevInputStream.j
ava:154)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:582)
at
weblogic.rjvm.http.HTTPServerJVMConnection.dispatch(HTTPServerJVMConnection.
java:359)
at weblogic.rjvm.http.TunnelSendServlet.service(TunnelSendServlet.java:25)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.Kernel.execute(Kernel.java:229)
at
weblogic.servlet.internal.WebAppServletContext.dispatch(WebAppServletContext
.java:2352)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
521)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
----------server-side error stack end-----------
This is not easy to reproduce - I've only seen it about once a day during
extended
performance stress tests, which complete most of the time successfully.
Any idea what these errors mean? Is there some tuning I can do to make them
stop?
I've already tried setting the ThreadCount to 10 and the
PercentSocketsReaders to 60
on the client command line, based on advice we got from BEA, but I've seen
this
particular problem whether I set those parameters or not. I had not seen
this problem
before switching to Weblogic 6.1 from 6.0.
--Rajiv

I have the same problem. Any hint? Is it a bug? There is some fix?
Angelo
"Michael Gogins" <[email protected]> wrote:
>
We have had a similar problem with tunneling JMS publish/subscribe through
HTTP
and HTTPS to get through firewalls. The JMS connection drops, and cannot
properly
be recovered.
Can anybody tell me if they have also had this problem with tunneling
other protocols
such as RMI or EJB?
In other words, does anybody know what layer of the protocol stack causes
this
problem?
Also, needless to say, does anyone have a workaround or solution?
"Rajiv Jauhari" <[email protected]> wrote:
With Weblogic 6.1SP1 on Windows 2000, I see the following error once
in a
while.
At the client, I get the following:
-----------client-side error stack begin-------------
weblogic.rjvm.PeerGoneException: ; nested exception is:
java.net.ProtocolException: Tunneling result not OK, result:
'DEAD',
id:
'18'
java.net.ProtocolException: Tunneling result not OK, result: 'DEAD',
id:
'18'
at
weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPCli
entJVMConnection.java:406)
at
weblogic.rjvm.http.HTTPClientJVMConnection.execute(HTTPClientJVMConne
ction.java:296)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
----------client-side error stack end-----------------
Meanwhile, at the server, the wl-domain.log has the following stacktrace:
----------server-side error stack begin-----------
####<Nov 11, 2001 7:11:20 PM CST> <Error> <ConnectionManager> <[Hostname]>
<[Managed Server Name]>
<ExecuteThread: '14' for queue: 'default'> <> <> <000000> <>
java.rmi.UnmarshalException: Incoming message header or abbreviation
processing failed ; nested exception is:
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
Start server side stack trace:
java.rmi.UnmarshalException: Incoming message header or abbreviation
processing failed ; nested exception is:
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
java.lang.ClassCastException: weblogic.rmi.internal.MethodDescriptor
at
weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.j
ava:182)
at
weblogic.rjvm.MsgAbbrevInputStream.readMessageContext(MsgAbbrevInputStream.j
ava:154)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:582)
at
weblogic.rjvm.http.HTTPServerJVMConnection.dispatch(HTTPServerJVMConnection.
java:359)
at weblogic.rjvm.http.TunnelSendServlet.service(TunnelSendServlet.java:25)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.Kernel.execute(Kernel.java:229)
at
weblogic.servlet.internal.WebAppServletContext.dispatch(WebAppServletContext
..java:2352)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
521)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
----------server-side error stack end-----------
This is not easy to reproduce - I've only seen it about once a day during
extended
performance stress tests, which complete most of the time successfully.
Any idea what these errors mean? Is there some tuning I can do to make
them
stop?
I've already tried setting the ThreadCount to 10 and the
PercentSocketsReaders to 60
on the client command line, based on advice we got from BEA, but I've
seen
this
particular problem whether I set those parameters or not. I had notseen
this problem
before switching to Weblogic 6.1 from 6.0.
--Rajiv

I recently got my iphone from AT&T which came with a charger and know the charger says "this cable is incompatible with this iphone and is not reliable" can anyone tell me how I can fix this or what to do?

I recently got my iphone from AT&T which came with a charger and know the charger says "this cable is incompatible with this iphone and is not reliable" can anyone tell me how I can fix this or what to do?

Contact AT&T to have them replace the cable.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Export Results-Not Enough Memory (1). I need HELP with this please. Using Windows 7 32-bit. Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

Everytime I go to export a photo, I get an error.
"Export Results: Not enough memory (1)
Using Windows 7 32-bit. Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

Even though you have 16gb of ram installed, 32 bit Windows can only use 4gb of it so 12gb is wasted. This is the reason you are getting not enough memory errors and is a known problem with Lightroom an 32 bit Windows during export. You need to change to 64 bit Windows.

Airport Extreme's support for streaming video NOT reliable for RealPlayer

AIRPORT EXTREME BASE STATIONS DO NOT RELIABLY PROVIDE STREAMING SUPPORT USING NORMAL TRANSPORTS FOR REALPLAYER.
Based on a problem I've had for a long time and information provided in RealPlayer OnLine Help, it appears that the Airport Extreme Base Stations do not reliably provide streaming support using normal transports for RealPlayer.
HERE'S THE REASON FOR CONCLUDING THAT
Even after updating with the latest software and firmware available for my Airport Extreme Base Station, RealPlayer will not play streaming video when my iMac is online via my Airport Extreme Base Station.
(The configuration is iMac (non-wireless) --> Ethernet cable --> Airport Extreme Base Station --> DSL modem.
Note that with that configuration I can browse the internet and play audio through RealPlayer - even though I cannot play streaming video.
In contrast, when my iMac is connected directly to my DSL modem via an Ethernet cable, then I have no trouble playing streaming video in RealPlayer.
HERE'S THE "WORK AROUND" SOLUTION I'M USING
In RealPlayer/Preferences/Transport, I selected to use HTTP transport exclusively.
Here's where to find details of that solution in RealPlayer's OnLine Help:
In RealPlayer's Help menu, choose RealPlayer Online Help. Scroll down the left side of RealPlayer's help window to find the section Troubleshooting -> Network/Connectivity -> Wireless Issues.
CREDIT FOR PUBLICISING THE "WORK AROUND" SOLUTION IN APPLE DISCUSSIONS
I found the aforementioned "work around" solution in a posting in this forum by Greg Robbins on Sep 2, 2005.
The topic in which I found that posting has been archived - replies are not allowed.
I am posting this topic to clarify the deficiency in Airport Extreme, and to help keep this solution available for the Mac community.
G4 iMac Mac OS X (10.3.9)
G4 iMac Mac OS X (10.3.9)

I should not have started this thread as a "question".
The initial posting presents a problem together with a "work around" solution.

Financial Document results not OK

Hi All,
I have one issue that when user enters the Financial documentno in the sales order its giving the error.
Financial document is for LC ( Letter of credit )
Financial Document:Check::Deadlines Check result : Not OK
Message NO E1574
Diagnosis:
According to the seetings in the customization for financial documentsThe system is checked the details;
Check : Deadlines
latest ship date : 31.07.2010
last confirmed schedule lines : 05.08.2010
check results : Not OK
When i checked the dates in the Financial document
latest ship date is 20.07.2010
But in the order delivery dates GI, Material availability,loading are 10.07.2010.
Kindly help..
Regards,
SK
Edited by: Mastan Shaik on Jun 17, 2010 11:52 AM

Dear Mastan,
Flow the seteps:
1. Please check the where you have assigned your Financial Document (LC) in Sales Order either Header Level or Item
Enter the FD at Header Level
Menupath: VA01/VA02 Goto Header Data - Billing - Financial Document Number
2. Please check the Schedule line date
Menupath: VA02 - GOTO - ITEM - SCHEDULE LINE- CHECK THE DATE
If the date is in future month as you mentioned in the mail 05.08.2010 and Last ship date is 31.07.2010 so you have to change the of FD by going into change mode.
3. Do changes in your Financial Documents VX12N Accordingly.
Best Regards,
MH

Why is my cache results not highligted anymore?

why is my cache results not highligted anymore?

When I do a word/s search.
Normally the words I typed and searched on Google will be highlighted in different colors each word at the top of the webpage.
The same color will be highligted for each word/s whenever they appears all throught out the page. when I open it as cached.
Now the words don't highlight any more and no color even.
Here below info from About.com about what I am asking about:
http://google.about.com/od/searchingtheweb/qt/cache_syntax.htm
''''''Highlight Keywords With Google Cache Search''''''
Find Specific Information Faster With Google's Cache
By Marziah Karch, About.com Guide
Is it hard to find a specific piece of information on a large Web page? You can simply this by using Google's cached page to highlight your search term.
As Google indexes Web pages, it retains a snapshot of the page contents, known as a cached page. When a cached page is available, you'll see a Cached link at the bottom of the search result.
Clicking on the Cached link will show you the page as it was last indexed on Google, but with your search keywords highlighted. This is extremely useful if you want to find a specific piece of information without having to scan the entire page.
Keep in mind that this shows the last time the page was indexed, so sometimes images will not show up and the information will be out of date. For most quick searches, that doesn't matter. You can always go back to the current version of the page and double check to see if the information has changed.

IMessage on iMac not reliably receiving photos

iMessage on iMac not reliably receiving photos but my iPhone and iPad are-what's the fix for this?

Hi,
I've been with the same problem for a couple of days, until finally today Messages simply stopped showing even a the window, so absolute inability to use it.
Considering that reinstalling the operating system is NOT a solution, I searched for something myself.
Pictures are controlled by xpcd, imagent and Messages, and it seems that when the problem arises is because they're using the wrong Apple server.
While this may be solved by Apple in a update (I hope so), in the meantime you can do a workaround (it worked for me on two different machines, and even days old images appeared).
In your Library, there is a folder called Preferences (that is /Users/<your_username>/Library/Preferences). There you should delete com.apple.imagent.plist com.apple.imservice.iMessage.plist and com.apple.imessage.bag.plist, with Messages CLOSED. Then reboot so Messages creates new ones. Also delete all file starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat that end in .lock.
If even then it still is not working, deleting all files starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat 100% for sure. But when you reboot you'll find you need to input again your login data for iMessage, FaceTime, Yahoo chat, AIM chat, Google Talk and Jabber (if you used them on Messages/iChat).
This is an annoyance, but less than a whole operating system reinstall or losing the functionality.
After all of this is done you should regain the ability to receive photos, send photos and drag&drop photos. Also if your Messages app only shows the menubar and no window at all, the same procedure solves it.
Regards,
Natalia Portillo
Claunia.com

Jexport results not reliable

Similar Messages

Maybe you are looking for