JFileChooser is not working for specific folder

I have JFileChooser code, which I have been using in past many times. However in current application I am using different enviroment (where I have more network drives), it cannot access specific folder (this folder is not on local hard disk).
It does not refresh view after I click on specific folder and it slows down. However if I click back arrow, it will return regularly and I am able to open neighbor folders without any problem.
All ideas are welcome...
Thanks!

The exclamation mark will cause command history expansion.
You need to use single quotes: e.g.: echo 'testuser:R0na!do8'|chpasswd
For explanation: http://www.gnu.org/software/bash/manual/bashref.html#Quoting

Similar Messages

Keyword search on collection set not working for specific sub-collections

I am having the following problem:
When I do a search (Text->Keyword->Contains All-> for a keyword (in my
case "Fave"), it does not work if I select the collection set that contains the
collection that contains the images with that keyword.
It DOES work if I select the folder, parent folder, or just the
collection that contains the image. Just not the collection set.
The details of how this came about are below - and are probably a
little unusual, but not outside the realm of what should be allowed.
Is there a way to reset/reindex keywords in a collection?
Specifically:
images lives in collection C1 which is part of collection set
CS1. It lives in F1 (on disk and in LR) which is in parent folder
PF1. A keyword search works when I select F1 or PF1 or C1, but NOT
when I select CS1
This happens on a set of folders that went through the following
(totally allowable?) sequence:
I am running on a Windows 7 64 bit machine with 64 bit LR3.3
I have an internal disk where I keep my catalog and images. Windows
mounts this as P:. I also mount it on my Desktop as the folder
"Lightroom" (this allows me to change to a larger external disk
by mounting it in the same place without changing the locations of
all the files).
I mistakenly imported pics into P:/PF1 rather than
C:/.../Desktop/Lightroom/PF1 as I normally do.
Added keywords made a collection C1 put the images in it, and added
C1 to collection set CS1
Having realized my import mistake (P: rather than
C:/.../Desktop/Lightroom), I went in the Folders->P: section and did
an Update Folder Location on F1 to C:/.../Desktop/Lightroom/F1
This seemed to be all fine, but this weird Keyword search problem
resulted.
I have tried the following things:
o Deleting and re-adding Keywords in the Collection
o Deleting and re-adding the Keywords in the Folder
o Renaming and relocating the Folder
o Create new collection C2 and move pics from F1 into C2

See my simplified recipe for reproducing this bug (which turns out not to be related to the drive mounting I described):
http://forums.adobe.com/thread/764538

SAP PLM 7.02- Web UI search not working for Specification

Hello PLM members,
I am facing issue with indexing of Specification connectors due to that the specification quick search is not working properly.
I am looking the steps to activate the EHS: Specification connector in the ESH_cockpit.
What is the prerequisite before activation of the Specification connector in the cockpit.
After selecting the EHS: Specification, do i need to activate all the related connector inside the specification.
What is Virtual template for EHS: specification in the cockpit.
Need detail about the scheduling a real time indexing.
Thanks
Shailesh

Dear Shailesh,
You can find the necessary information in the Specification customizing:
When you create a connector the cockpit will automatically creates all the necessary dependent connectors. When all of the connectors have the status Prepared, you can start the indexing.
The PLM Web UI uses the virtual template for the Advanced Search and all the other enterprise search. This model is only a application relevant representation of the EHS data. You can find additional information about this here: Creating Virtual Templates - Search Technology - SAP Library
Hope it could help.
Kind Regards,
Gergő

"Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

Hi Everybody. I have a weird one for you.
I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
It looks more like a profile issue.
She's a very active archivist, so she only has 486MB of space used by her mailbox.
It's well under quota.
It's been really puzzling me.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi Timssims,
Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
I suggest asking Outlook Forum for help so that we can get more professional suggestions.
For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
However I also have some suggestions for your reference:
1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
2. Please also paste the detailed error message if "operation failed" is not the
complete information.
3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Cut and Paste not working for specific client?

Gui Gurus,
I have recently upgraded some users to Gui 710 Patch 8. However on one users install, she cannot copy and paste the entire content of a cell. For example:
If she copies aaaabbbbbccccdddd, she'll only get aaaabbbbbcccc. For some reason it gets truncated.
I have tried this on my identical install and can do the exact same cut and paste for the same input field fine. I did a reinstall of her Gui, but that did not help. I checked her user parameters and could not find anything to alter this behavior. I tried "Quick Cut and Paste" also, and that yielded the same incorrect results. I did not see anything else in the Options / I18N that would alter this?
Any ideas where to look?
Thanks,
Jeff Martens
Basis Admin.

Martin,
Thanks for the reply. I did try the cut & paste option in the expert tab and that did not work.
I am copying from a normal user input field to another input field. This is not static text that you would have to CTRL+Y to copy.
Thanks,
Jeff

BMC - Auto Notification not working for specific Client

Hello Experts,
We have PATROL® for SAP Solutions Trak 5.0.50 installed and configured for our SAP ECC EhP4 system and trying to generate mails for aborted jobs.
The configuration in place:
- Collectors are running fine.
- Configurations for auto-alert are in place:
- opti_script is defined in /sapmnt/ Aborted Jobs. Here the Priority value is 551 much higher than the required 400.
Now I have deliberately aborted a job and a alert was also generated. But the problem is the mail is not getting fired.
And the same settings work perfectly on the client 000 of the same SAP system.
Kindly suggest any pointer which could help fixing the issue. I checked over and over again and compared client 000 settings to client 100 settings. All are same. But the mail does not get fired from client 100.
Thanks a ton in advance,
Srikishan

The issue was resolved.
For reference, the Patrol parameter 'consecutive alerts' is of relevance here. Only after a specified number of defined consecutive alerts is the notifciation mail triggered. Set it to 1 or more.
Regards,
Srikishan

S920 - Not working for specific function

I have bought S920 last month
Model No Lenovo S920_ROW
Android 4.2.1
Baseband Version
S920.V23.2013/05/22 00:19
Build Number
S920_ROW_S121_131217
The phone sometimes does not respond on unlocking to enter my PIN.
I am not able to make phone recognize OK buttion during a OK / Cancel Popup.
Few touch suddenly stops working and then it responds to the same touch after sometime.
Can you please check on this and help me resolve this?
-Sri

Hi Sriram... Is this issue resolved?

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

"Track Shipment" is iOS4 does not work for Canada Post tracking numbers

Not 100% sure this is the best forum to post this but couldn't find an iOS specific forum.
When an email arrives with a shipment tracking number embedded in it, iOS4 is smart enough to recognize it and turn it into a link. You click the link, select "Track Shipment" and in theory you get sent off to the appropriate shipment tracking website.
Problem is that this does not work for Canada Post tracking numbers, I get sent to the USPS tracking site instead of the Canada Post one. I assume that the number format is similar but there must be a way to distinguish between CPC tracking numbers and USPS tracking numbers (by range ?).

This has since become working in 4.0 and higher.
I noticed I now get a notes folder for each of my email accounts (ie. in my case; MobileMe gets one, Gmail gets another, and Virgin Media a yet another). And all three since accordingly correctly between Notes mailbox on iPhone 4 and it's counterpart Notes mailbox in the mac mail app under Reminders section.
Additionally, just like other main mailboxes (inbox, drafts, sent, trash, junk), they also have a "unified" box at the top in both mac and iphone, in order to view notes in all email accounts at the same time.
Hooray Apple, shame it took so long, but at least it's here now

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Image Processor not working for me. Help!

In a nearby thread I've reached a stumbling block. Image Processor in CS4's PS is not working for me. I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
"This layered Photoshop file was not saved with a composite image"
I've verified in my Preferences > File Handling that image previews are always saved. (But I've been using PS for a long time and previews are always available with all my manually saved work.)
So here's what happens when I invoke File > Scripts > Image Processor...
In section 1 of the menu I select the source folder where the psd files reside
In section 2, I select 'Save in same location'
In section 3, I select 'Save as JPEG'
In section 4, I change nothing. No special actions. Include ICC profile is checked.
When I select run I get an error message: "Sorry, I could not process the following files:"
And then it lists what appears to be 3 lines per psd file in the source directory:
The path to the source dir
The name of the source dir
The [source_dir]/[filename.psd]
What am I doing wrong?

mrdior wrote:
I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
The part I don't understand is the "export" Part. File > Export > Data Sets as File.. on my machine is grayed out so I don't know how this feature is used. Is Export > Data Sets as File... used with CSV data sets and Photoshop variables?
Check your Photoshop preferences and make sure you have set in the file handling tab "Maximize PSD and PSB File Compatibility:" to Always using the pull down menu. If that is not your current setting try setting that to see if the exported PSD files contain composite previews. When I use save as PSD on my system I alway see Photoshop save through up a popup window stating generating composite preview image.

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

JFileChooser is not working for specific folder

Similar Messages

Maybe you are looking for