JFormatterTextField value and text difference problem.

I've the following problem I tersted also using the FormattedTextFieldDemo.
Suppose the user introduces, in the rateField wich has only 3 decimal digits, the value 1.234567 (wrong), then the formatted text field shows 1.235 but the value is still 1.234567 (System.output.print shows it).
In my environment this is a big problem because the user sees 1.235 but the value is different, computations are done on a different value and so on.
How can I solve that issue and force value to 1.235 ?
If this is not possible how can I avoid the user introduces more then the allowed decimals ?
Tks
Tullio

Maskformatter don't seems to be a correct solution, it's too rigid in its mask (if I understand well its behaviour).
I don't know how many integer digit the user should input, I need only to control it introduces no more than a given number of decimal digits, or, better, convert the inputed value to that number of decimal digit but antaining the allignement between text and value.
Tks
Tullio

Similar Messages

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

Data sets and text encoding problem

I have a problem when trying to import french text variables into my data sets (for automated generation of lower thirds). I can not get PS to display french special characters correct. all 'accented' As and Es etc. display as weird text strings, just like your browser running on the wrong text encoder.
How do I get PS to interpret the data sets right? Any idea?
thanx
Gref
( PS CS6 (13.0.1), Mac Pro running on OS X 10.7.3)

Thanx Bill.
Unfortunately I cannot change the font as it is corporate. It has all the characters I need, though.
Did I mention, that I have to generate french AND german subs? No.
Well I tackled the german versions by processing the textfiles I get with textwrangler saving them as UTF-16. That worked with the german versions.
Unfortunately I ran into 2 other problems now:
First problem:
The data set consists of 7 names and their respective functions. This processes perfectly in german (as I thought to this point) but in the french version it processes perfectly for the first 4 data sets while the fitfth has the right name but the function variable now displays the 5th function AND all the rest of the names and functions. I can not get these data sets displayed seperately. Bummer.
But even more annoying…
Second problem:
When I now import my perfect german lower thirds into Avid I seem to loose my alpha information.
Avid is supereasy to use with alpha: you have 3 choices: inverted (which is the usual way of importing) having black in the alpha transparent. normal - white transparent or ignore - no transparency.
Importing 'inverted' alpha always worked (I use Avid for about 15 years now). but these processed PSDs don't. No alpha.
So I tried to assign an alpha channel via Actions to these files. Now Avid seems to discard the layers completely leaving me with white text where it should be black. The PSDs have black character text layers but in Avid the characters are white. It seems like AVID just renders the white pixels of the alpha channel.
Assigning the Alpha is no option anyway, as the whole process should make the generation of these lower third EASIER and faster for the person that has to make every lower third by hand by now.
All of this can be boiled down to one word: ARGH!

How to get key and text value of field "TNDRST" in VTTK from R/3 into BI

There is one field call "TNDRST(Tender Status)" in SAP table VTTK in R/3. We can find key value, but we are unable to find text for this field in VTTK. However we can see text value if we double click domain:TNDRST and go to value range.
Questions, how to get key value and text of TNDRST together in BI. Do we need to create a master data source for TNDRST text information in R/3 and extracting into BI, if yes, how to? Are there any easy way to do it??
Thanks,
Sudree

Hi Sudree,
You need to create a generic Text Datasource to extract this information into BI System.
1. Create a generic DS based on Table: DD07T
2. The fields should be put in the extract structure.
          DOMNAME (Make this as Selection in the DS ) -
Filter the Domain Name
          DOMVALUE_L -
Key Value of Tender Status
          DDTEXT -
Text / Description
          DDLANGUAGE -
Language
3. DD07T is the table with all the Domain names & their values, so in the Infopackage enter the Selection Value for DOMNAME as 'TNDRST' and then run it.
Or you can create a view out of this table based on DOMNAME filter as 'TNDRST'.
Regards,
Chathia.

How can i do to see the master and text values of the Key figure 0UNIT

Hi gurus,
How can i do to see the master and text values of the Key figure 0UNIT, please step by step, i m in the key figure 0UNIT but i want to see if the UNIT for example BX = BOX, something like this is that i want to check, thanks!

If you look at the unit tables, you will see the values and texts. It's in SPRO, not in RSA1. My access is limited on my system here, but the documentation says to go to t-code CUNI. I believe in that tcode you can look at all of the unit equivalencies and what each unit's text is ..... like an ea means each; KG = Kilogram; etc...
I am on an 3.x system, so in SPRO I go to BW CIG=>General Settings=>Check units of measurement.
Brian

Need to put value and test in pie chart

hi all,
I have a requirement where i have to put both the value and the text in the pie chart.
I have useed the following code
<SliceLabel textType="LD_VALUE"/>
is it possible to display both value and text.
Regards,
Dhaya.

To get the actual Value use this.
<SliceLabel textType="LD_VALUE"/>
Other vaules you can use are
LD_TEXT_PERCENT, LD_VALUE , LD_TEXT , LD_PERCENT
Only these are possible in oracle library
http://winrichman.blogspot.com/search/label/chart

Integer values and decimal values in weblient UI - Display mode

Hello,
i have developed an custom assignmentblock with some custom fields.
Some of this fields are integer values and text values.
Some other fields are decimal values.
I face the issue that this decimal values are in display mode right-aligned all other fields are left-aligned.
In edit mode all values are right-alligned.
How can i change this behaviour? All values left-alligned in display mode!
Otherwise this looks strange.
Thank you
Kind regards
Manfred

Hi,
Decimal values will be displayed right-aligned. To change that you need to modify the GET_M method.
In get_m method, you have to change the attr datatype to string.
Data: attr type string.
Data: dref type ref to data.
Get reference of attr into dref.
Regards,
Arun
Edited by: Arun Kumar on May 14, 2010 3:03 PM

Retrieve data from a text file, incrementing the last value and save new value below

Hi
This was working initially. It is part of my LabView Project. I was trying to create a unique number that increments every time the adds the value to the list. It works on computer perfectly. But when I put this on a PDA, it seems to create a blank space when reading the contents of the text file after the last value, which means 0 + 1, which is not what I want.
Please run the testUniqueNoOnPDA.vi first and change the path to C:\uniqueNumber.txt and save the uniqueNumber.txt file to your C drive and see What I am trying to do. Click the Enter button to increment.
Why does the PDA create a blank space after the last value and a computer does not?
I was working perfectly all week and it is not working well now.
Help please, I think I'm missing something
Attachments:
uniqueNumber.txt ‏1 KB
testUniqueNoOnPDA.vi ‏33 KB
testUniqueNoOnPDA.lvproj ‏4 KB

It works perfectly, it was a hardware problem. It depends on what PDA I used.

How to get selected item value and display text in selectOneChoice ?

Hi
Thank you for reading my post
I bind the a selectOneChoice component to my backing bean so i have an object which represent this component in the backing bean.
now i need to find which item is selected by use , i know that i can use
getSelect_service().getValue.toString() , but it will return the value of the selected item, how about its display text ?
I should say that i create an static list for selectOneChoice items.
thanks

Using JDeveloper 10.1.3.1, freshly downloaded off OTN. I used the following code to try and identify the problem you are encountering. I attempted to use a valueChangeListener in combination with af:selectOneChoice components that use SelectItems and the singular SelectItem. I could not reproduce the error in either case. Please post more information about your development environment.
          <af:selectOneChoice label="Label 1"
                              binding="#{backing_test.selectOneChoice1}"
                              id="selectOneChoice1"
                              valueChangeListener="#{backing_test.valueChangeListener}"
                              autoSubmit="true" immediate="true">
            <af:selectItem label="1" value="1"
                           binding="#{backing_test.selectItem1}"
                           id="selectItem1"/>
            <af:selectItem label="2" value="2"
                           binding="#{backing_test.selectItem2}"
                           id="selectItem2"/>
            <af:selectItem label="3" value="3"
                           binding="#{backing_test.selectItem3}"
                           id="selectItem3"/>
          </af:selectOneChoice>
          <af:selectOneChoice label="Label 2"
                              binding="#{backing_test.selectOneChoice2}"
                              id="selectOneChoice2"                              valueChangeListener="#{backing_test.valueChangeListener}"
                              autoSubmit="true" immediate="true">
            <f:selectItems value="#{backing_test.items}"
                           binding="#{backing_test.selectItems1}"
                           id="selectItems1"/>
          </af:selectOneChoice>
    public void valueChangeListener(ValueChangeEvent evt){
        // returns a UISelectOneChoice object
        System.out.println(evt.getSource().getClass().getName());
        // returns a string
        System.out.println(evt.getNewValue().getClass().getName());
    public Map getItems(){
        items = new HashMap();
        items.put("11","11");
        items.put("12","12");
        items.put("13","13");
        return items;
    }

Get the value from dropdown list (selectedIndex) and text field -- not working

Hi All,
I am trying to find and change by the values selected by user using dropdown and text field. Here is the code.
ChangeRevDetails();
function ChangeRevDetails(){
          var myDialog = app.dialogs.add({name:"Enter copyright information"});
//    var monthlist = col1.dropdowns.add('myList', undefined, myList);
          var col1 = myDialog.dialogColumns.add();
          var col2 = myDialog.dialogColumns.add();
    col1.staticTexts.add({staticLabel:"Month:"});
          col1.staticTexts.add({staticLabel:"Year:"});
    col1.staticTexts.add({staticLabel:"Rev. no.:"});
    var myList = [ "January", "February", "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
     var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
     var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
     var MyRev = col2.textEditboxes.add({minWidth:100});
    var RevMonth = (myList [myMonth.selectedIndex]);
    var RevYear = myYear.editContents;
    var RevNumber = MyRev.editContents;
    var RevToReplace1 = RevMonth +", "+ RevYear;
    var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
    var myResult = myDialog.show();
        if(myYear.editContents == "") //entry is ""
        alert("Please enter some text into the contents field.");
        ChangeRevDetails();
        else if(myResult == true) //user entered datas
            alert (RevMonth);
            alert (RevYear);
            alert (RevNumber);
            alert (RevToReplace1);
            alert (RevToReplace2);
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
            // grep find/change
            app.findGrepPreferences = app.changeGrepPreferences = null;
            app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
            app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.changeGrepPreferences.changeTo = RevToReplace1;
            app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.activeDocument.changeGrep();
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
    else //implies user clicked cancel
    myDialog.destroy();
The problem is, it is not taking the value which the user selects from the dropdown and the text field. It takes the default value as "January" and the year is "2013" as both of these values are given as selectedIndex:0 and editContents:"2013". I have compared the coding with some other working scripts as well, but it is not working. I have added several alert boxes to check the value we get.
Also, the find and change is also not working. Please help me on this. Thanks.
Regards,
Muthuraj. D

Change the order for dialogresults:
var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
var MyRev = col2.textEditboxes.add({minWidth:100});
var myResult = myDialog.show();
if(myYear.editContents == "") //entry is ""
alert("Please enter some text into the contents field.");
ChangeRevDetails();
else if(myResult == true) //user entered datas
var RevMonth = (myList [myMonth.selectedIndex]);
var RevYear = myYear.editContents;
var RevNumber = MyRev.editContents;
var RevToReplace1 = RevMonth +", "+ RevYear;
var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
didn't have a look for the find change problem

Reg: problem in displaying as key and text

Hi Friends,
I have a problem while displaying values for 0profit_ctr.
In Development box report working fine. In production it giving problem.
ISSUE:
I want to display the 0Profit_ctr as key and text format. In development box it showing correct. I cross verified the properties of 0proft_ctr charcaterstic in report of development and production box. In both it is defined as dispaly key and text.
Also cross verified the infoobject (0Profit_ctr) details, In both Business Explorer general settings defined as Display as Key and Text.
Everything is same in production and development box for this. Even though in production it showing as text and key. we need to display it as key and text.
any suggestion on this.
Regards
Mrk.

It could be that the infoObject has been disturbed, have you tried just re-activating the object in Production.
Also check the following link :
I am able to search only by text and not by Key in filter.

Slider with Synth - Problems setting tick and text color

Hi,
I'm currently using Synth and I'm having some problems with sliders. The sliders appear and work fine, although I can't seem to change the color of the ticks and text.
I would like the ticks and text to be orange, but it seems to default to black. I tried changing this in the Slider section of my Synth file (see below) but with no luck.
Would anyone have any suggestions?
Thanks in advance for your help.
   
   
   
   <style id="SliderTrackStyle">
      <imagePainter method="sliderTrackBackground" path="images/Slider/slider_track.png"
                    sourceInsets="7 7 7 7" destinationInsets="7 7 7 7" paintCenter="true"
                    stretch="true" center="false" />
      <state value="DISABLED">
         <imagePainter method="sliderTrackBackground" path="images/Slider/slider_track_disabled.png"
                       sourceInsets="7 7 7 7" destinationInsets="7 7 7 7" paintCenter="true"
                       stretch="true" center="false" />
      </state>
   </style>
   <bind style="SliderTrackStyle" type="region" key="SliderTrack" />
   
   
   
   <style id="SliderThumbStyle">
      <font name="Arial" size="1" style="BOLD"/>
      <state>
         
         <color type="TEXT_FOREGROUND" value="#8f5f00"/>
         <imagePainter method="sliderThumbBackground" direction="horizontal"
                       path="images/Slider/slider_thumb.png" center="true" />
         <imagePainter method="sliderThumbBackground" direction="vertical"
                       path="images/Slider/slider_thumb.png" center="true" />
      </state>
      <state value="PRESSED">
         
         <color type="TEXT_FOREGROUND" value="#8f5f00"/>
         <imagePainter method="sliderThumbBackground" direction="horizontal"
                       path="images/Slider/slider_thumb_pressed.png" center="true" />
         <imagePainter method="sliderThumbBackground" direction="vertical"
                       path="images/Slider/slider_thumb_pressed.png" center="true" />
      </state>
      <state value="DISABLED">
         <imagePainter method="sliderThumbBackground" direction="horizontal"
                       path="images/Slider/slider_thumb_disabled.png" center="true" />
         <imagePainter method="sliderThumbBackground" direction="vertical"
                       path="images/slider_thumb_disabled.png" center="true" />
      </state>
   </style>
   <bind style="SliderThumbStyle" type="region" key="SliderThumb" />
   
   
   
   <style id="SliderStyle">
      <property key="Slider.paintValue" type="boolean" value="false" />
      <property key="Slider.thumbWidth" type="integer" value="14" />
      <property key="Slider.thumbHeight" type="integer" value="14" />
      
      
   </style>
   <bind style="SliderStyle" type="region" key="Slider" />Edited by: robben07 on May 18, 2010 7:36 AM

I put the following code in the Title and it worked...
<B><font face="Arial" size="+3" color="#244764">Text.....</FONT>
the only problem is to know how to center it (I've tried putting <CENTRE> html tag but it's not working)... can you please advice...
Thanks again for your assistance

Invalid text value. A text field contains invalid data. Check the value and try again

Hello,
I am having a problem with the error mentioned in the title. I see alot of others have experienced the same problem, but I have quite a twist to it.
I see the problem when I try to edit a list item, and then try to save the changes.
Here what I see in the ULS log:
System.Runtime.InteropServices.COMException: Invalid text value. A text field contains invalid data. Check the value and try again
at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId,
Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter
pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean
bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback,
ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
I have 3 front end servers(fx wfe1, wfe2, wfe3). And here is the twist.
If I access the library directly through wfe1 and wfe2, I get the error. If I access the library via wfe3 if works just fine.
So because of this, I think it is safe to assume that is has nothing to do with the character limit of 255. Nor does it have anything to do with the field type, since it is already set to mulitible lines of text.
So. Any ideas?
Regards,
Michael
mic

Check if there is any change in web.config of these servers
http://support.microsoft.com/kb/2880758
To work around this issue, limit the length of the personal message in the invitation to 256 characters or less.
This is a known issue. Microsoft is working to resolve this issue.
http://social.msdn.microsoft.com/Forums/en-US/7bb16e51-e7cc-439e-a8b3-755683ccac1a/max-length-on-custom-field-types
To solve the problem you may have to change the field's parent type to "note". To do that you have to open your fldtypes... file under Templates/xml and change the line to:
"<Field Name="ParentType">Note</Field>" from "<Field Name="ParentType">Text</Field>"
You might also have to add a sql type if your text needs to be longer than 255 characters
<Field Name=”SQLType”>ntext</Field>
and inherit from SPFieldMultiLineText instead of SPFieldText
If this helped you resolve your issue, please mark it Answered

What is the difference between Standard text and Text Symbols?

Hi,
1.Difference between Standard text and text symbol,?
2. Which we use Standard symbol?

Text symbol
Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
- Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
- Using a standard text symbol.
The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
Also check this link,
http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script.

What is difference between I-mesage and Text Message, some I want to send I message and but I send text and it's charge to me

What is difference between I-mesage and Text Message, some timeI want to send I-message and but I send text and it's charge to me.

Thanks Wj,
another question, how I got to know, my I-message is activated, I put as ON, but I am not getting mesage it's activated, there is link showing to me, learn more abount I-message. do it will take time? please advise how I can activate my I-message. Please advise.

JFormatterTextField value and text difference problem.

Similar Messages

Maybe you are looking for