JMS adapter adding namespace to PIP. Please help!

Hi Experts,
I have a XI scenario where 4C1 PIP is being sent to TIBCO.
The issue is that, the output PIP has a namespace <Pip4C1InventoryReportNotification xmlns:jms1="http://www.tibco.com/namespaces/tnt/plugins/jms">
But no where in XI this namespace has been specified. I suspect that this namespace is getting added in JMS adapter side.
Can this namespace be easily removed in JMS adpter so that PIP element is generated as <Pip4C1InventoryReportNotification> ? If Yes, then how can we do that?
Thanks & Regards
Gopal

From the namespace and the prefix, I guess that the Tibco jms libraries add that namespace. If this is true, you cannot do anything in PI and you have to check, if Tibco can work with that namespace or remove it.
Regards
Stefan

Similar Messages

I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s. I ve tried: dragging to itunes, minimize file name of mp4, adding by file/folder still not adding. WHY? Please help.

I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s.
I ve tried:
dragging to itunes,
minimize file name of mp4,
adding by file/folder, but still not adding.
WHY? Please help.

This is very serious. Your computer got infected with ransom malware, Cryptowall.
Go here for further info.
CryptoWall 2.0 Anything Good about Buying you Keys? - General Security
CryptoWall and DECRYPT_INSTRUCTION Ransomware Information Guide and FAQ

HT2905 My itunes looks nothing like the examples in this tutorial. I do not have "display exact duplicates" or "date added". Can someone please help me remove duplicate songs? Also, I downloaded two audio books and they are showing up in my song list.

My itunes looks nothing like the examples in this tutorial. I do not have "display exact duplicates" or "date added". Can someone please help me remove duplicate songs? Also, I downloaded two audio books and they are showing up in my song list. Why???

'Show duplicates' is now under the 'View' menu. To see the 'Date added' column go to 'View options' from the 'View' menu and check it in the section under 'Stats'.
Click an audiobook once to select it and hit command-i (Mac) or control-i (Windows). Go to the 'Options' tab and set 'Media Kind' to 'Audiobook'.

I don't know my rescue email and security password.i just added an alternative email address but it doesn't send there....also I just added 25$ on iTunes.please help!

I don't know my rescue email and security password.i just added an alternative email address but it doesn't send there....also I just added 25$ on iTunes.please help!

The reset link will only send reset info to your rescue email address, an alternate email address is not used for account security. If you don't know what your rescue email address is (you won't be able to view/change it until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to view and/or change your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Apple Mini DVI to Video Adapter is not working. Please Help...

I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko

My 3rd gen iTouch is stuck on the "updating library" screen - I can't listen to any music and it's been like this for almost 24 hours. I only added about 200 songs, please help.

So I added about 200 songs to my iTocuh yesterday, and it has been stuck on the "updating library" screen under Music ever since then. I did add the music in stages - as in, I added some songs, then got some more and plugged the iPod in again (maybe this has something to do with it). I would restore the iPod, but I have music on it that is not on my Macbook and I don't want to lose that music. Help please!

Correction: I plugged my iPod back into my mac, it backed up/updated etc. and now when I go to my music, it returns me to the home screen. What is going on!?

Issues adding friends to iChat, please help!!

I am having issues adding friends on ichat. I can enter their emails but it doesn't notify them on their computer that I added them. How do I fix this?

Hi,
iChat uses Screen Names (with AIM and can be email in style)
Jabber Names/IDs look like emails as well but with Googletalk, FaceBook and Jabber Australia being the few exceptions I know of.
AIM Names when registered look like an email ([email protected]) but you do not need the @AIM.com suffix when adding them as a Buddy.
(Apple IDs of @mac.com and @me.com do need the relevant suffix)
It would help if we knew what type of Buddy List you were adding these to and what sort of "Email address" they are.
11:27 PM Friday; March 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Nic adapter 3com 3c905c-TX-M - Please Help

My nic is a 3c905c-TX-M, I installed the NIC and device driver from 3Com for the adapter, it does not work, when I run prtconf I receive the next message:
pci10b7, 1000, instance #0 (driver not attached)
Somebody could help me please
!!! Urgent

Any response would be recreating the wheel as far as 3Com Nics are concerned. Search this forum for 3c90 or 3Com and you will find more that you'd want to know.
Lee

Using plain http adapter using (SIN)---Most urgent please help me

Hi Experts,
all we need to do is call the pipeline directly using plain http adapter using (SIN) and get the output from the pipeline to the local file folders. This can help developers to verify the interfaces that have been migrated to XI , to compare the out put results generated in XI with the original output captured using existing middle ware solutions.
Could anyone help me out this Urgent

Hi Experts,
all we need to do is call the pipeline directly using plain http adapter using (SIN) and get the output from the pipeline to the local file folders. This can help developers to verify the interfaces that have been migrated to XI , to compare the out put results generated in XI with the original output captured using existing middle ware solutions.
Could anyone help me out this Urgent

Clarifiation : Adding Systems in SMSY - please help

HI All,
We have SAP Application server installed on system1 and Databse installed on system2 for a satellite system
Now when adding the System in SMSY of solution manager under Landscape components:
1.created a server with hostname system1(SAP application server), i added system1's FQDN and ip addres in technical data
2.created another server with hostname system2(Database), added system2's FQDN and ip address in technical data
Now under Database-cretae new database- i added SID ,but which server(system1 or system2) should i add in technical data of this
rgds
MAR

Hi MAR,
don't worry too much about the database data. It is more or less for documentation reasons only.
Just look at your landscape as it is: the DB resides on the dbserver, so put server2 here. Later on, when you enter your system data (this is important!) you should have two instances for the system SID: Instance one (AS) on server1, instance two (DB) on server2. When creating the RFC connections, it is obvious that they will point to your application server(1).
Hope this helps you.
Regards,
Dirk

Display adapter Disabled, Now What? Please Help

I'd really appreciate any help I can get. A few days ago, I put my computer on sleep mode, after a couple of hours I tried to start working again, but everything on the screen was too big. I re-started the computer, but got the input signal out of range error. I re-started in safe mode, disabled the display adapter, set the resolution to 1024x768 and re-started the computer.
I got a better resolution, but it's not quite right since I can't see the scroll bar, the file menu and the back arrow on the upper left corner.
The out of range error message states to change settings to 1366x768-60Hz, but that option does not show on the list.
I've tried many things and this is the only thing that let's me work on the computer. My questions are:
--How can I set the res. to 1366x768 when that option does not appear on the list? and
--How can I re-enable the dispay adapter without going back to the same problem?
--I noticed I don't have the sleep mode when I click on the start button on the lower left corner and I know that when I turn it off at the end of the day, I'll have the same problem when I try to turn it on again.
I've had my desktop Compaq Q 1859 LCD monitor which came with my Compaq Presario CQ5111F with Windows Vista for 3 years and had to such problem before.
Thank you

Also when you get to the point where you are going to install the graphics driver, then you can enable the display adapter at that point.

Getting TNS-12560: TNS:protocol adapter error....please help

i am unable to get my LSNRCTL started.
[oracle@greg]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-NOV-2007 09:32:32
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /home/oracle/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /home/oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /home/oracle/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=greg)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=MYHOST)(Port=1521))
TNS-12560: TNS:protocol adapter error
TNS-00583: Valid node checking: unable to parse configuration parameters
Listener failed to start. See the error message(s) above...

I am a newbie, so please pardon me.
this is what my listener.ora file looks like at the moment. Can someone look at it and tell me if it's okay?
LISTENER =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY=MYDB))
(ADDRESS= (PROTOCOL= IPC)(KEY= PNPKEY))
(ADDRESS= (PROTOCOL= TCP)(Host= bob.dhcp.mysite.com)(Port= 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME= bob.dhcp.mysite.com.)
(ORACLE_HOME= /home/oracle/app/oracle/product/10.2.0/db_1)
(SID_NAME = MYDB)
(SID_DESC =
(SID_NAME = extproc)
(ORACLE_HOME = /home/oracle/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF

Cancelled order not credited back-and then phone support added to the pile please help.

Hello,
I could not be more disappointed in a customer service team that I praised such a short time ago.
Last week, I preordered 2 copies of limited edition Destiny for PS3 using the same gift card. Today, I decided that I no longer wanted the orders, and cancelled them online. Got 2 cancellation emails, but then one more email explaining that I needed to contact customer service because there was an issue refunding my gift card for one of the orders.
I did so, and after talking with CS Denise, she decided it would be best to reissue me a new gift card. The balance should have been $244 after all was done, but it turns out she only reissued a gift card for the same amount as the one I had was and then nuked my existing one!
So I call back, this time calling the Elite line, and talked to a nice lady, explaining everything over again, this time with a new twist. I though we were getting somewhere, but decided that she needed to talk to someone in post purchase. She puts me on hold for 10 minutes…only to transfer me to a girl named Crystal in post purchase.
Again, I explained everything as clearly as possible. She understood, too, but needed to get someone in another dept(gift card/credit? Not sure.) involved. After 10 more minutes on hold, ANOTHER person picked up for me to explain my story to again!!! I lost my cool. I had been on the phone for 75 minutes now, while I was supposed to be on my 20 minute break at work. I said I don't have time for this and when asked when she could call back, my answer of 6pm when I get done was not an option for her. I don't know how we couldn't get this figured out in 75 minutes!
I'm so frustrated right now…I hope someone from Best Buy can take a look at my information and straighten this out asap. Message me for my account details.
Here is what I should have:
Initial gift card balance: $300
Purchase: $36
Purchase: $19
Pre-order Destiny: $84
Pre-order Destiny: $84
Balance $77
Cancel Destiny +$84
Cancel Destiny +$84
New balance should be $245

Greetings BrianJason,
I’m sure you are very excited for Destiny to release this September! I’m sad to hear that you felt the need to cancel your pre-orders, and apologize for any hassle receiving your refund may have caused you.
Typically, funds are refunded to the original form of payment without any issues. It is peculiar that your funds didn’t go back to your gift card. I apologize if your experience resolving this issue was not what you expected, as it seemed to take you a substantial amount of time on the phone with our representatives. From the details you shared, it certainly doesn’t seem like a respectable representation of our company.
That being said, I am glad that you were able to finally resolve this issue. If you should have any questions or need further assistance, please let me know.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

TS3274 When I open the contacts app I don't have the add sign in the bottom of the screen that is necessary for adding contact info. Please help!

My iPad is about one week old and I am just beginning to use it. I am trying to put my contacts in the contact app but can't seem to find the add sign at the bottom of the page to get started. Any ideas on what I am doing wrong? Thanks for all help!p

The add sign may be at the top or the bottom (plus sign).
But note this from the iPad User Manual:
Add a contact: Tap . You can’t add contacts to a directory you’re only viewing, such as a Microsoft Exchange Global Address List.

Error in JMS Adapter for MQ series

We have configured a JMS Adpater to connect to MQ Serries queue manager running on our local server. The XI Server is a remote server where JMS adapter is deployed.
Upon deployment we see following string in JMS adapter log -
Sender channel. Details: com.ibm.mq.jms.MQQueueConnectionFactory
And the status of Adpater is RED.
The Adpater is configured in sender mode.
We have created a local queue in Queme Manger and a Server Connectio channel which is being used in adpater configuration.
Please suggest what could be the missing link here.
Appreciate if you can provide us link s to any docuemtn which details the steps to configure an MQ JMS adapter.
Thanks,
Garima

Hi Garima,
Please check the following:
1. Add dhbcore.jar also to aii_af_jmsproviderlib.sda and deploy it.
2. Check the existence of your JMS drivers.
3. Check the following link and Install the drivers as the way it is mentioned in the guide 'How To Install And Configure External Drivers For JDBC & JMS'
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
There are 4 files which needs to be added. http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
Any of the above solutions should help you solve the problem.
Regards,
Abhy

JMS adapter adding namespace to PIP. Please help!

Similar Messages

Maybe you are looking for