Jms selector syntax
I am new to jms,I do some examples about jms on weblogic6.1.
one of all the examples is about jms selector, but i find the
selector expression is too simple. who can tell me about jms selector syntax? where I can find the refence?
Actually jms selector is not tough. You can find more details in specs on what all it supports. It supports most or SQL syntax and feature.
--Ashwani
Similar Messages
-
All,
Is it possible to use System.currentTimeMillis() in the JMS Selector Syntax?
System.currentTimeMillis > Timestamp + 3600000 (Timestamp is a header field)
i.e. message created time is greater than one hour.
Any pointers to infosource will be REALLY appreciated.
Thanks in Advance,
C R Baradwaj
Raghuram Bharadwaj C wrote:
> All,
>
> Is it possible to use System.currentTimeMillis() in the JMS Selector Syntax?
>
> System.currentTimeMillis > Timestamp + 3600000 (Timestamp is a header field)
> i.e. message created time is greater than one hour.
No.
>
> Any pointers to infosource will be REALLY appreciated.
Typically people that ask this question are attempting
to create timer messages. Since 6.1, WebLogic JMS has
had an extension to support this. See the documentation:
http://edocs.bea.com/wls/docs81/jms/implement.html#1235262
One can also configure WL to automatically move expired
messages to an error destination. This feature is
available in 8.1.
P.S. For a complete list of features, and a good
intro to WL JMS, see:
http://dev2dev.bea.com/technologies/jms/index.jsp
Tom, BEA
>
> Thanks in Advance,
> C R Baradwaj
>
>
>
-
Setting JMS Selector as JMS Message ID
Does anyone knows how to set the JMS Selector as JMS Message id, i tried using JMSMessageID=P<720374.1242857046478.0> but i keep getting exception stating
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "JMSMessageID=P<720374.1242857046478.0>"
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:164)Hi Tom,
Do you know any general solution for the situation you mentioned in your last post on this thread? Unfortunatelly one of our customers have an architecture which mixes a weblogic 8 domain with a weblogic 10 one. The JMS server is in the weblogic 10 domain but they have an OOB IGW application which runs on weblogic 8 and uses the JMS API of it. The IGW application applies the JMS Message Id model for correlating the request and response messages, but the consumer, on the weblogic 10 side, cannot find the response message because the JMS Message Id changed. The JMS of webloigc 8 - I guess - put an 'N' char after 'ID:' into the msgId and paste the whole id into the correlationId field. But on the weblogic 10 side, the consumer have the original msgId without 'N' and, of course, it doesn't find the response msg.
So do you have any general solution to convert between these different msgId formats?
Thanks in advance,
Andras -
I am attempting to create a "catch other" JMS selector string such that the user can choose which messages they are interested plus any that they are not interested in. This is how I am attempting to do this
Ignored Selected
a b
c d
e f
Other
which generates the following string
filter IS NOT IN ('a', 'c', 'e') AND filter IS IN ('b', 'd', 'f', '%')
What I am expecting it to do is only take the objects with filter set to b d f and any sequence of characters not in the ignored list (a,c,e) however it does not do this. It looks as if the % is not doing what I am expecting it to (match any sequence of characters).
I even tested with setting the filter to filter IS IN ('%') which I believe should return true for everything since the spec says that % validates to anything including NULL.
I am using JBOSS 4.0.3. Any help with this would be appreciated.Hi lets try once like this,
In column selector view, first u can give the main column action like like this click on properties tab---go to interaction tab---select action link.
Next u can add another column to column selector view, in this column go to properties tab----go to interaction tab----action links.Already i done this...
Please mark if it helps, -
For WLS 10 JMS Topic subscribers that use a JMS selector, what is the
maximum length that a selector can be? Would a large selector criteria
such as: id=1234 OR id=5231 OR id=... x10,000 be supported?
The remote destination consumers only want to receive notification messages for records containing certain unique ids. However, it's possible that the remote destination is observing thousands of records.The short answer is yes. This is a frequently asked question. I
suggest searching this newsgroup in google using terms like "C++",
"IIOP", ".NET", "JCOM".
Note also that WL 8.1 (now out in beta) contains a thin java client
(something like 0 or 300K without JMS, 700k with. The 0K client comes
from leveraging WL's IIOP support.)
Tom, BEA
jerry8006 wrote:
> WLS JMS supports the clients developed by using non-java program languages,such
> as,c++,VB?
-
Is there currently a way in 6.1 where we can do the following:
Take a Message and then pass it to a method which evaluates a jms
selector at
our choosing?
Ok so I had to write my own. Xpath requires the message to be xml and
that can slow things
down we have tested. So will be using my own selector.
Sure would be nice if you allowed us access since its got to be a boolean
method selector.test(msg)
Tom Barnes wrote:
> Hi Larry,
>
> Deja Vu. (I see you asked this same question in this newsgroup
> back in April of last year.) The answer is still the
> same -- no. You can still use xpath approach, as was
> discussed earlier - if you beleive the pundits, this is
> actually more of a standard. I will discuss with my coworkers
> to see about exposing and supporting
> the internal selector code. If anything comes out
> of it, I will email you offline. Meanwhile I suggest
> placing an enhancement request through customer support.
>
> Tom
>
> Larry Presswood wrote:
>
>> Is there currently a way in 6.1 where we can do the following:
>>
>> Take a Message and then pass it to a method which evaluates a jms
>> selector at
>> our choosing?
>>
>
-
Does Oracle JMS implementation support using selector 'NOT LIKE' syntax?
I used the string "JMSCorrelationID NOT LIKE 'abc%'" as receiver selector, I got an exception saying:
JMS-159: Invalid selector Selector Parse error"
However, using 'LIKE' is OK.
any idea?
- DavidFollowing the rationale that the selector must evaluate to true for the message to be picked up, an absent property would equate to false. Hence not being picked up.
TE -
Hi,
My problem is so easy, that i'm sure i'm making some simple mistake.
I have one message in my JMS queue, and I can see it using the WL 9.2 console:
ID,CorrId,Time Stamp,State String
ID:P<315390.1173718045000.0>,,Mon Mar 12 17:47:25 CET 2007,visible
After applying a selector to the console
JMSMessageId = 'ID:P<315390.1173718045000.0>'
I don't see the message above !!
I'm quite sure that the selector is ok, isn't it ??
At first I used it in my application by the result was the same (the message was not selected).
What can be the reason ?
The other problem is that after putting incorrect selector I got the error in the console:
Error creating message cursor for CISRT JMS Module!Q_DATA_IN_E
and I cannot do anything about it (I cannot enter the 'Show Messages' screen again without server restart).
I use Weblogic 9.2 MP1 on Windows.
Thanks in advance for help.
Marcin Stanski.Hi Marcin,
Thanks for posting. I'll try see if its possible to fix things so other customers don't run into the same problem. Its possible that the interoperability consequences weren't considered when "Id" was fixed to be "ID" in 9.x.
I'll file internal requests to have 10.0 and 9.x fixed so that they support both the nominally non-standard "Id" in addition to the standard "ID". If you want to track the requests, you can contact customer support and mention that "Tom Barnes has filed an Essex CR for the problem."
Tom Barnes
WebLogic JMS Dev Team -
Hi,
When specifying a selector for a given JMS message, where's the message filtered out/in? The WL server or the client API?
I'm assuming the former, but could not find any information on the documentation. If it's important for my question, I'm using the .NET api rather than the Java one.
Any clarification would by greatly appreciated.
Best regards,
Luís Almeida
Edited by: user12860813 on Jan 3, 2011 11:34 PMYou can try posting JMS question to the JMS newsgroup.
-
Hi ALL,
In my scenario from reqQueue I will recive message and in JCD I will be doing some manipulations where in one scenario I have send response message to again reqQueue but the queue should not process the message if it is response. If it is request only then it has to process.
Please suggest me if any body have idea.
Thanks & Regards,
Anitha.BHi,
Queues are for point to point communication. In your case, what do you want to do after the message is processed and re-sent into the original queue? Probably you need to use a topic + a message selector instead. Generally speaking I never recommend as a good solution to use message selectors with queues, it is IMHO an improper design. However, as the message is processed, why do you want to redelivery it to the same queue and not to a different one? Using queues allows to decouple processors and implement a pipeline pattern: http://eaipatterns.com/PipesAndFilters.html
Probably your technical question could be dealt by rethinking a bit your design. Maybe, if you can tell us more details on what you want to finally achieve, we could provide some hints.
Regards,
Maurizio -
How to Configure Selector For JMS Bridge
Hi,
I was trying with Selector option in working with multiple Bridges, here is the scenario i applied.
Created five Queues ( Q1, Q2, Q3, Q4 and Q5 ) and configured JMS Bridge Destinations having each queue with unique connection factory ( CF1, CF2, CF3, CF4 and CF5 ) and named it as D1, D2, D3, D4 and D5.
Then created JMS Bridges as JB2 with source as D1 and destination as D2. Similarly JB3 as D1-D3, JB4 as D1-D4 and JB5 as D1-D5.
And set Sector for each of JB2, JB3, JB4 and JB5 as Two, Three, Four and Five respectively and did restart after the changes.
Now i am expecting the following scenario to work
Pushing message to Q1/CF1 having Two in the content of message, hence expecting the message to be delivered to Q2/CF2 through JB2, but the messages is not moved through JB2.
Similarly, Pushed message to Q1/CF1 having Three in the content of message, hence expecting the message to be delivered to Q3/CF3 through JB3, but the messages is not moved through JB3. Similar behavior for other messages having Four and Five in the message content.
During the bridge configuration, selected QOS as "Atmost-Once".
Note: All the configurations were done in same domain and the WL version is 10.3.6.0.*
The sample message i am pushing to Q1/CF1 say "Two Test Data"* and expecting to reach Queue Q2/CF2
Regards
Venkata Madhu
Edited by: vv**** on Sep 12, 2012 1:05 PMHi Venkata,
The expected selector syntax is the standard SQL-like JMS syntax. There's an extensive description of the syntax in the javadoc for javax.jms.Message.
Selectors should normally only reference message header fields and message properties. I don't normally recommend using a selector that is based on message body as this requires using a proprietary WebLogic extension based on "xpath" XML expressions, and can have an large impact on performance. (The performance hit is caused by two factors - the need for the JMS server to unmarshal/decompress/page-in the body in order to get at its contents, and the natural cost of scanning a message body to see if it matches a string.)
HTH,
Tom -
Hello,
I want to achieve the following using JMS,
Receiving messages from producers with specific criteria, ex. give me only messages that have date less than now.
if I used MDB then I have the choice of setting the selctor only one time, is there a way to set it from time to time.
If not then how do I achieve that using a combination of session beans and MDBs.
Becasue I want to do some processing on the messages received of that criteria then resend them to other receivers.Generally you cannot do this. The selector syntax does not allow comparisons against System.currentTimeMills(), and consumers don't allow changes to the selector. Within the specification, the best one can do is recreate the consumer over and over again. This is of course made even worse in that selectors for MDBs are buried inside a deployment descriptor. Nasty stuff.
WebLogic JMS allows you to specify a delivery time on a message. However it is considered an extension. Other vendors may have a similar feature, but there is no common API for it. -
JMS messages sometimes not received by Flex client
We have a problem that Flex client is sometimes not able to
receive JMS messages from a JBoss JMS Queue. Most of the time it
works, but if users logout/login using the same account frequently
or you restart JBoss 4.0.4 during their session then it might
happen. Then it doesn't work at all even if you wait. Client is
able to send messages when this problem occurs, which can then be
intercepted by other clients but cannot receive any messages from
himself or from the others. JBoss 4.0.4 is running in cluster mode.
Could it be that there is an old frozen session which is receiving
the messages meant for the new client?(consumer selector is unique
to each user, but if a user logs in twice, the same selector is
used) If I run 2 instances of my JMS test consumer using the same
selector then the consumer which registered later receives the
messages and if it quits, then the older consumer starts receving
them. This doesn't occur in Flex.
Flex is running on Tomcat 5.5.17.
Our messaging-config.xml is
<?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"
class="flex.messaging.services.MessageService"
messageTypes="flex.messaging.messages.AsyncMessage">
<adapters>
<adapter-definition id="actionscript"
class="flex.messaging.services.messaging.adapters.ActionScriptAdapter"
default="true" />
<adapter-definition id="jms"
class="flex.messaging.services.messaging.adapters.JMSAdapter"/>
</adapters>
<destination id="JMSQueueB">
<properties>
<network>
<session-timeout>10</session-timeout>
</network>
<jms>
<initial-context-environment>
<property>
<name>java.naming.factory.url.pkgs</name>
<value>org.jboss.naming:org.jnp.interfaces</value>
</property>
<property>
<name>Context.PROVIDER_URL</name>
<value>jnp://x.x.x.x:1100,jnp://x.x.x.y:1100</value>
</property>
<property>
<name>Context.INITIAL_CONTEXT_FACTORY</name>
<value>org.jnp.interfaces.NamingContextFactory</value>
</property>
</initial-context-environment>
<destination-type>Queue</destination-type>
<message-type>javax.jms.TextMessage</message-type>
<connection-factory>ConnectionFactory</connection-factory>
<destination-jndi-name>queue/B</destination-jndi-name>
<destination-name>B</destination-name>
<delivery-mode>PERSISTENT</delivery-mode>
<message-priority>DEFAULT_PRIORITY</message-priority>
<acknowledge-mode>AUTO_ACKNOWLEDGE</acknowledge-mode>
<transacted-sessions>false</transacted-sessions>
</jms>
</properties>
<channels>
<channel ref="my-rtmp"/>
<channel ref="my-secure-amf"/>
</channels>
<adapter ref="jms"/>
</destination>
</service>
Part of our actionscript code:
pmConsumer = new Consumer();
pmConsumer.destination = "JMSQueueB";
pmConsumer.selector = "some jms selector ....";
pmConsumer.addEventListener(MessageEvent.MESSAGE,
presenceMessageHandler);
pmConsumer.addEventListener(MessageFaultEvent.FAULT,
faultHandler);
pmConsumer.addEventListener(ChannelFaultEvent.FAULT,
channelFaultHandler);
pmConsumer.subscribe();
Also Flex seems to be handing channel switching incorrectly,
if rtmp port is firewalled, it won't use amf properly even though
it was given 2 channels in configuration file and JMS messaging
doesn't work. We have to alter the channel set during runtime.
Flex also doesn't automatically switch to other JMS server if
one goes down. Is this a feature or a bug? We have to reset
producer and consumer in order for this to work.Hi,
It was in earlier version of the OS that you could turn Bonjour On and Off.
If this can be done in Leopard and Snow Leopard I have not found it yet. (But I don't look that often and nor for very long)
This Forum may help with that
I would also try a PRAM reset. (on Both computers)
Shut down the computer.
Restart it holding down APPLE(or ⌘)ALT+PR Keys until you have heard three Start Up Bongs.
7:18 PM Tuesday; December 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Two questions:
1.) Where does the message selector query get executed? Either every subscriber
gets all messages for the subscribed topic and then runs the selector against
it, or the server runs the selector on the message before sending it out to the
subscriber. While it may seem like the latter is preferable, I wonder how much
performance on the server side will be affected as a result of the server processing
ALL of the message selectors. If the former is the case, there is obviously more
network traffic, but the server's processing time is reduced when many messages
are sent out to many subscribers with message selectors. Does anyone have any
input on this?
2.) Are there any plans for Weblogic supporting subscriptions to a hierarchial
topic? For example, subscribing to cars.* will return messages sent to the topic
cars.bmw and cars.ford. I know this is not part of the JMS specification, but
it is a nice addition.
Thanks.
Dan
Tom Barnes <[email protected]> wrote:
>Hi Dan,
>
>Answers in-line.
>
>Dan Baumbach wrote:
>
>> Two questions:
>> 1.) Where does the message selector query get executed? Either every
>subscriber
>> gets all messages for the subscribed topic and then runs the selector
>against
>> it, or the server runs the selector on the message before sending it
>out to the
>> subscriber. While it may seem like the latter is preferable, I wonder
>how much
>> performance on the server side will be affected as a result of the
>server processing
>> ALL of the message selectors. If the former is the case, there is
>obviously more
>> network traffic, but the server's processing time is reduced when many
>messages
>> are sent out to many subscribers with message selectors. Does anyone
>have any
>> input on this?
>
>If you use the WL topic multicast extension, the former. The former
>is the
>obvious choice using multicast, as the server only has one network call
>to make per
>message...
>
>Otherwise, the latter. The latter is preferable, as otherwise the
>server would
>be making one network call be subscriber per message - which is far more
>heavy-weight.
>
>>
>>
>> 2.) Are there any plans for Weblogic supporting subscriptions to a
>hierarchial
>> topic?
>
>This is under consideration.
>
>> For example, subscribing to cars.* will return messages sent to the
>topic
>> cars.bmw and cars.ford. I know this is not part of the JMS specification,
>but
>> it is a nice addition.
>
>Yes, topic hierarchies are not part of the JMS specification, but you
>can emulate them
>fairly easily, if somewhat inefficiently, by using JMS selectors with
>a "like" clause.
> The publisher sets a correlation-id on the message:
>msg.setJMSCorrelationID("cars.ford");
> The subscriber sets its selector to "JMSCorrelationID like 'cars.%'"
>
>>
>>
>> Thanks.
>> Dan
>
>Tom
>
-
WebLogic 9 and Antlr problem with JMS Messages
Hi all,
I'm facing a problem and your help would be very appreciated.
We've got an EAR application deployed on a WebLogic 9.x. As we use Hibernate3, when we put it into WebLogic 10, we needed to add "antlr" library to our "weblogic-application.xml" as "prefer-application-packages" (This is because of the well-known error of ClassNotFoundException of the HqlToken class).
The version of Antlr we have is 2.7.7, and works perfectly in WebLogic 10.
Now, we want to have an EAR that can be installed in both WebLogic 9.x and 10. But we're getting a fatal exception when we want to create a JMS consumer with a JMS selector in WebLogic 9.x(this is for listening only for the message we need in the queue).
So, in WebLogic 10 it works with "antlr" in the prefer-application-packages, but in WebLogic 9.x doesn't. And if we don't put it there, it works in WL 9 but not in WL 10.
The best would be to have the library in the weblogic-application.xml so WebLogic put our library first in the classpath. But in WL 9 we've got this exception:
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:2659)
at weblogic.jms.client.JMSSession.setupConsumer(JMSSession.java:2432)
at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2379)
at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2359)
at weblogic.jms.client.WLSessionImpl.createConsumer(WLSessionImpl.java:800)
at crm.appl.cat.CatUtil.enviarMensajeSync(CatUtil.java:244)
at crm.appl.cat.mar.CatMessageReceiver.receive(CatMessageReceiver.java:571)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:176)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:275)
at org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:133)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
at crm.appl.cat.mar.CatServlet.service(CatServlet.java:108)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at crm.appl.cat.mar.CatFilter.doFilter(CatFilter.java:33)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3212)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1983)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1890)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1344)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:895)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:178)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
... 35 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
at weblogic.jms.frontend.FEConsumer.<init>(FEConsumer.java:255)
at weblogic.jms.frontend.FESession$2.run(FESession.java:966)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.frontend.FESession.consumerCreate(FESession.java:962)
at weblogic.jms.frontend.FESession.invoke(FESession.java:2824)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
... 37 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:895)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:178)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
... 44 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.backend.BEQueueImpl.createFilterExpression(BEQueueImpl.java:155)
at weblogic.jms.backend.BEQueueImpl.createConsumer(BEQueueImpl.java:182)
at weblogic.jms.backend.BESessionImpl.createBEConsumer(BESessionImpl.java:368)
at weblogic.jms.backend.BESessionImpl.createConsumer(BESessionImpl.java:378)
at weblogic.jms.backend.BESessionImpl.invoke(BESessionImpl.java:289)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
... 46 more
Check that "invocationId" is a JMS String Property that we're adding in the messages. Our same source code works perfect in WL 9 without "antlr" as an prefered application package. You know that in WL 9, the antlr library was bundled into the weblogic.jar, so WL has it in his System classpath.
Someone has an idea how we can solve this? The final solution may be having 2 EARs (one for WL 9 and one for WL 10, with the only change of the weblogic-application.xml), but it's not a nice solution.
Thank you a lot in advance.
Ariel Cassan
ArgentinaHi all,
I'm facing a problem and your help would be very appreciated.
We've got an EAR application deployed on a WebLogic 9.x. As we use Hibernate3, when we put it into WebLogic 10, we needed to add "antlr" library to our "weblogic-application.xml" as "prefer-application-packages" (This is because of the well-known error of ClassNotFoundException of the HqlToken class).
The version of Antlr we have is 2.7.7, and works perfectly in WebLogic 10.
Now, we want to have an EAR that can be installed in both WebLogic 9.x and 10. But we're getting a fatal exception when we want to create a JMS consumer with a JMS selector in WebLogic 9.x(this is for listening only for the message we need in the queue).
So, in WebLogic 10 it works with "antlr" in the prefer-application-packages, but in WebLogic 9.x doesn't. And if we don't put it there, it works in WL 9 but not in WL 10.
The best would be to have the library in the weblogic-application.xml so WebLogic put our library first in the classpath. But in WL 9 we've got this exception:
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:2659)
at weblogic.jms.client.JMSSession.setupConsumer(JMSSession.java:2432)
at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2379)
at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2359)
at weblogic.jms.client.WLSessionImpl.createConsumer(WLSessionImpl.java:800)
at crm.appl.cat.CatUtil.enviarMensajeSync(CatUtil.java:244)
at crm.appl.cat.mar.CatMessageReceiver.receive(CatMessageReceiver.java:571)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:176)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:275)
at org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:133)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
at crm.appl.cat.mar.CatServlet.service(CatServlet.java:108)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at crm.appl.cat.mar.CatFilter.doFilter(CatFilter.java:33)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3212)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1983)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1890)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1344)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:895)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:178)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
... 35 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
at weblogic.jms.frontend.FEConsumer.<init>(FEConsumer.java:255)
at weblogic.jms.frontend.FESession$2.run(FESession.java:966)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.frontend.FESession.consumerCreate(FESession.java:962)
at weblogic.jms.frontend.FESession.invoke(FESession.java:2824)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
... 37 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:895)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:178)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
... 44 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "invocationId = '124567585'"
at weblogic.jms.backend.BEQueueImpl.createFilterExpression(BEQueueImpl.java:155)
at weblogic.jms.backend.BEQueueImpl.createConsumer(BEQueueImpl.java:182)
at weblogic.jms.backend.BESessionImpl.createBEConsumer(BESessionImpl.java:368)
at weblogic.jms.backend.BESessionImpl.createConsumer(BESessionImpl.java:378)
at weblogic.jms.backend.BESessionImpl.invoke(BESessionImpl.java:289)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
... 46 more
Check that "invocationId" is a JMS String Property that we're adding in the messages. Our same source code works perfect in WL 9 without "antlr" as an prefered application package. You know that in WL 9, the antlr library was bundled into the weblogic.jar, so WL has it in his System classpath.
Someone has an idea how we can solve this? The final solution may be having 2 EARs (one for WL 9 and one for WL 10, with the only change of the weblogic-application.xml), but it's not a nice solution.
Thank you a lot in advance.
Ariel Cassan
Argentina
Maybe you are looking for
-
Changed DataSource in R/3-- New PSA Table in BI ?????
Hello Experts, I have one question. When someone change a DataSource in R/3 System, what happens it for the DataSource in BI at this time. An Error ? (TimeStamp) Or new PSA Table ??? Thank you for your Answer..
-
My Thinkpad T20 will not power on after being undocked until it is docked again. Battery indicator is 100% and Maximum Lifespan mode indicated. Anyone else with this issue?? Any solutions?/
-
End user access - Files at the OS level
Hi all, I am not sure how apt would it be to post this question in this thread. And I am also not aware of the SAP functionality that I am going to detail. With one of the interfaces, we get files dumped in the XI system. I am trying to give access t
-
My first question is if anyone knows how to configure VOIP equipment through the router instead of from the computer to VOIP equipment. I have to do it that way for work, and I'm not changing any of my home phone lines/numbers over. Second queston is
-
How to Convert iTunes Songs (Apple lossless audio file) to a MP3 for E-mail
How to Convert iTunes Songs (Apple lossless audio file) to a MP3 for E-mail? My computer is Windows 7 and my Itunes software version is 1.0.2 Many thanks in advance...