JNI gives strange problem

Hi,
I m facing a strange problem while creating jclass/jmethod objects for a JNI interface function.
Here my program uses Java for GUI and C++ for low level module. JNI is the interface.
I need to invoke a GUI method from c++ module in a loop.In this case I m keeping a global reference for the jclass object. and creating jmethodID as and when it is required to invoke GUI method.
But sometimes GetStaticMethodID fails to create method ID and once it happenes, it will happen continuisly. further cannot call GUI method..
Some times it even fails to create Jclass object.
I m using j2sdk1.4.0
Please give me inputs for this strange behaviour of JNI.

Hi,
I m facing a strange problem while creating
jclass/jmethod objects for a JNI interface function.
Here my program uses Java for GUI and C++ for low
level module. JNI is the interface.
I need to invoke a GUI method from c++ module in a
loop.In this case I m keeping a global reference for
the jclass object. and creating jmethodID as and when
it is required to invoke GUI method.
But sometimes GetStaticMethodID fails to create method
ID and once it happenes, it will happen continuisly.
further cannot call GUI method..
Some times it even fails to create Jclass object.
I m using j2sdk1.4.0
Please give me inputs for this strange behaviour of
JNI.Hi, did you ever figure this out? I am having similar issues.

Similar Messages

  • Strange Problem..No where the host is associated but still gives UnknownHos

    hallo..
    i have a strange problem...
    I connect to an smtp server to send emails.
    the following is the exception i get always
    it gives me Unknownhostexception : aatsv001 (my PC name)
    but i had never used it to send mails..nor in the email addresses(recipients)..but still it comes..
    the log shows the authentication of smtp and at
    354 go ahead it gives IOException..
    please help..
    DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
    DEBUG SMTP: useEhlo true, useAuth true
    250-PIPELINING
    250 8BITMIME
    DEBUG SMTP Found extension "PIPELINING", arg ""
    DEBUG SMTP Found extension "8BITMIME", arg ""
    DEBUG SMTP: use8bit false
    DEBUG SMTP SENT: MAIL FROM:<[email protected]>
    DEBUG SMTP RCVD: 250 ok
    DEBUG SMTP SENT: RCPT TO:< >
    DEBUG SMTP RCVD: 250 ok
    DEBUG SMTP SENT: RCPT TO:< >
    DEBUG SMTP RCVD: 250 ok
    DEBUG SMTP SENT: RCPT TO:< >
    DEBUG SMTP RCVD: 250 ok
    DEBUG SMTP SENT: RCPT TO:< >
    DEBUG SMTP RCVD: 250 ok
    Verified Addresses
    I removed the email addresses here totally 4
    DEBUG SMTP SENT: DATA
    DEBUG SMTP RCVD: 354 go ahead
    java.net.UnknownHostException: aatsv001
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:153)
         at java.net.Socket.connect(Socket.java:426)
         at java.net.Socket.connect(Socket.java:376)
         at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
         at sun.net.www.http.HttpClient.openServer(HttpClient.java:386)
         at sun.net.www.http.HttpClient.openServer(HttpClient.java:602)
         at sun.net.www.http.HttpClient.<init>(HttpClient.java:303)
         at sun.net.www.http.HttpClient.<init>(HttpClient.java:264)
         at sun.net.www.http.HttpClient.New(HttpClient.java:336)
         at sun.net.www.http.HttpClient.New(HttpClient.java:317)
         at sun.net.www.http.HttpClient.New(HttpClient.java:312)
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:481)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:472)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:574)
         at java.net.URL.openStream(URL.java:960)
         at javax.activation.URLDataSource.getInputStream(URLDataSource.java:100)
         at javax.activation.DataHandler.writeTo(DataHandler.java:297)
         at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1089)
         at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:635)
         at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:233)
         at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:68)
         at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:849)
         at javax.activation.DataHandler.writeTo(DataHandler.java:305)
         at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1089)
         at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1527)
         at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:321)
         at com.aat.PudisJobController.PMail.sendEmail(PMail.java:85)
         at com.aat.server.MessageFilterProcessing.doPostProcessing(MessageFilterProcessing.java:186)
         at com.aat.server.MessageFilterProcessing.doPostProcessing(MessageFilterProcessing.java:161)
         at com.aat.PudisJobController.PTask.doPostProcessingForStdReport(PTask.java:247)
         at com.aat.PudisJobController.PTask.saveTaskInfo(PTask.java:222)
         at com.aat.PudisJobController.PTaskWaiter.run(PTaskWaiter.java:45)
    javax.mail.MessagingException: IOException while sending message;
    nested exception is:
         java.net.UnknownHostException: aatsv001
         at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:353)
         at com.aat.PudisJobController.PMail.sendEmail(PMail.java:85)
         at com.aat.server.MessageFilterProcessing.doPostProcessing(MessageFilterProcessing.java:186)
         at com.aat.server.MessageFilterProcessing.doPostProcessing(MessageFilterProcessing.java:161)
         at com.aat.PudisJobController.PTask.doPostProcessingForStdReport(PTask.java:247)
         at com.aat.PudisJobController.PTask.saveTaskInfo(PTask.java:222)
         at com.aat.PudisJobController.PTaskWaiter.run(PTaskWaiter.java:45)
    can u plss tell me wt actually happening?
    thanx in advance
    K�vi

    re-post

  • Computer slower and a few other strange problems since upgrading to SL

    Hi all,
    About a month ago, I upgraded my mid-2009 MBP to SL. I'm now on 10.6.1. Ever since the upgrade, my computer's been somewhat slower than it was when I ran Leopard (although many people I know say their machines are faster). I did restart several times at one point, and that seemed to speed it up, although it still experiences delays I didn't have before. I've also had a bunch of strange issues:
    1) Safari is most noticeably slow, especially when using something like Top Sites on Safari 4. I alleviated this problem somewhat by setting new tabs to open a blank window rather than Top Sites, but even so, Safari is generally slower, gives me 'pinwheels' often, and also is less stable.
    2) The other day, I restarted to find that all fonts except system fonts had been mysteriously deactivated. As a designer, I rely heavily on my many fonts, which I manage using Linotype FontExplorer.
    3) Today, I opened my computer up after having it sleeping in a backpack, and it had turned off. It was not out of battery; it had just turned off for no apparent reason.
    4) Judging by Activity Monitor, RAM is being used somewhat more heavily by the system, contrary to the advertisements of a 'lighter' footprint for SL as compared to Leopard. However, according to Activity Monitor (which I check frequently), the processor does not appear to be getting taxed any more heavily than under Leopard, which makes the sluggishness more inexplicable.
    5) Yesterday, I could not get my computer to recognize my Time Machine backup disc. After restarting, it worked, but this is a pain.
    I appreciate any advice I can get. Does anyone else have similar problems or solutions? Or is the general consensus that these are SL bugs that Apple will work out by about 10.6.4 or so?
    Thanks,
    Nathan
    Message was edited by: nateeanes

    I began this thread awhile ago, but the essence of it is that I had a number of strange problems, although mostly my computer was just slower, when upgrading from Leo to SL.
    I've now wiped my HD and re-installed SL. It seems faster, although there are still a few issues:
    1) iWork (Pages, Numbers) has very weird coloring. All the text looks light blue and/or cyan, and I can't fix it.
    2) Although initially Safari worked great, lately it's been going back to its habits of being slow and showing strange things like chopping up the 'Top Sites' view, i.e. rendering it in an off way.
    3) Adobe CS3 will not install properly. I get them loaded up, but when I try to launch a program, I get an error that says "licensing for this product has stopped working". I cannot get to the 'activate' page, even though I uninstalled and deactivated CS3.
    In the interest of full disclosure, I did restore my home account after clean installing SL-- maybe I should have brought the files over folder by folder rather than bringing back my whole home folder with its settings? I wonder if I accidentally brought over Adobe's FLEXnet folder too.
    Also, does anyone know if Adobe CS3 can cause these problems with Safari and other programs? It just seems that the whole machine was slower after installing CS3, even though I wasn't running the programs.
    Any help is appreciated.
    Nate

  • Strange problems on Macbook Pro over past year...

    I'm about to do an erase and install after having numerous strange problems on my mid 2009 17" Macbook Pro (Leopard) over the past year, some of which I have opened threads for on these forums.
    They are listed bellow to see if anyone wants to give their final two cents as to what is causing them. They may or might not be related.
    1) I recently found the "Unknown" user classifications at second from top in the user priveleges for the main Macintosh HD folder and "Local Work" – which is my main folder for work.
    http://discussions.apple.com/thread.jspa?threadID=2741617&tstart=0
    2) Last Summer I had some very strange login problems which were well documented in this very long winding thread here:
    http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
    3) Can't access iTunes store due to this error code -54. Thread opened here:
    http://discussions.apple.com/thread.jspa?threadID=2653733&tstart=0
    4) Some proceses I've seen in the activity monitor that are possibly a little sketchy are as follows:
    - "netsessionmac1" ... Akamai playing about?
    - "TaskManagerDaemo" ... with "Root" user, ... sounds a bit vague and possible malware according to google?
    5) In Skype I get constant warnings of other computers trying to connect from Little Snitch and Virus Barrier. I get so many of them one after they other pausing skype that I can only use Skype with Little Snitch off. I can only use it late at night also as there seems to be more attempts being blocked in virus barrier during the day that I can't even get past the login:
    Some examples in screen grabs:
    http://oi56.tinypic.com/xkwwtf.jpg
    http://oi55.tinypic.com/2v2w941.jpg
    And other examples of the hundreds of different IP addresses I've had asking to access computer on some obscure 4 digit port:
    http://whatismyipaddress.com/ip/86.178.52.58
    http://whatismyipaddress.com/ip/94.168.76.16
    http://whatismyipaddress.com/ip/94.171.116.123
    http://whatismyipaddress.com/ip/92.235.196.125
    http://whatismyipaddress.com/ip/92.239.25.70
    http://whatismyipaddress.com/ip/192.168.0.1
    http://whatismyipaddress.com/ip/92.235.208.101
    http://whatismyipaddress.com/ip/92.236.252.132
    http://whatismyipaddress.com/ip/85.15.190.49
    ... etc
    6) I have to constantly open and close Mail after it hangs on sending. Says there is a connection problem on port 110 or whatever, but words fine as soon as I open again. This problem happens particularly when I want to send from my 2nd or 3rd POP or IMAP other than my normal one.
    7) Slow Safari/Firefox and internet.
    8) I got this strange warning about my IP changing recently when downloading a file:
    http://oi53.tinypic.com/2z4b77o.jpg
    9) My internet cuts out for large periods of time while the other PC desktop in my house works perfectly fine.
    Well, any last suggestions much appreciated. Many thanks.
    Message was edited by: Scottishengineer

    I suppose your expanding battery problem could have caused some or all of these problems, but most of them sound like software issues.
    If I were you I'd try a few things:
    1. boot from your snow leopard install disk and repair your startup disk with disk utility.
    2. repeat the repairs until no repairs are reported (the toilet paper principle).
    3. repair permissions again.
    4. if the problems persist, trash the preferences files for the misbehaving apps.
    5. if the problems persist, delete the misbehaving apps and reinstall them.
    6. it the shutoffs persist, try a PMU reset.
    7. a PRAM reset would probably be a good idea too.
    8. if none of that works, archive and reinstall.
    there is a freeware utility called applejack that will also do most of this.
    Details on all of these will be readily available with a google search.

  • Strange Problems With Display and Permissions Since 10.5.1 update.

    Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
    I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
    I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
    Here is a screen shot of the line and dock problem.
    Here is a screen shot of my "About This Mac.
    If anyone could lend some light on this issue, I would greatly appreciate it.
    Thanks
    Jeff

    you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
    btw - no solution yet.

  • A very Strange Problem!!!help me!!

    i encounter a very strange problem, in EJB
    i write two EJB, one Stateless Session called A, and one Entity called B.
    i want to call B's findByPrimaryKey method in one A's Business, but failed!!!
    but when i remove the statement that performed the findByPrimaryKey method to A's setSessionContext method, It's Success!!!!!
    what the Problem, i am useing the Borland 's AppServer.
    who can help

    how u create the entity bean B from A?
    using proper lookup?
    can u try by write a small function inside bean A
    that contain proper lookup to Bean B...
    then try to call finbyPrimaryKey...
    now tell me is it working?
    or else can u give code or clear idea..
    if i can help u ,,,, sure i will
    do mail me
    [email protected]

  • File not picked up strange problem

    Hi all,
    I am doing File to file tranfer .
    my source dir is AL11 and i am ftp the file to reciver system .
    I am encountering strange problem .
    Some times my file adapter pick the file  and tranfer the files sucessfull  and sometimes  it does not pick the file . i trying to pick same files always  i.e *.txt
    in RWB cc it show no error . it gives message  polling sucess but no message id in it .
    i tried to deacitve and active the adapter , but it is of no use .
    if anyone  faced this type of problem please reply
    Thanks

    Hi,
    Some times file adapter will not pick the file it will be strange u cant find any error regarding it..........i thnik u have proper authorization for AL11 because file adapter is picking the file...
    check the processing parameters what is the mode of trasfer is it test or delete.....
    better to have NFS at both the ends or take NFS at sender side...
    Regards,
    Phani

  • Can't Uninstall iTunes - Strange Problem

    Right, so my iTunes has a really strange problem. Since I tried opening it yesterday afternoon, I've noticed it doesn't do anything but try to install itself, even though it's ALREADY installed on my computer. That is to say, whenever I open my iTunes, it will give me a loading bar and tell me it's preparing an instillation. However, midway through, it always fails.
    I thought this wouldn't be much of a problem when I decided I would just uninstall it and then reinstall it to fix it. But a new problem came up when I went to my control panel and tried to uninstall it. From what I could tell, iTunes seems to ALWAYS want to install itself, no matter what. When I tried to uninstall it, it seemed to do it, but before it could complete, it started to reinstall itself and then an error message came up, error message "2330", to be exact.
    Tell me, how do I fix this? I'd like to keep using iTunes, but it seems that it's doing everything in it's power to keep from doing so...

    Since I tried opening it yesterday afternoon, I've noticed it doesn't do anything but try to install itself, even though it's ALREADY installed on my computer. That is to say, whenever I open my iTunes, it will give me a loading bar and tell me it's preparing an instillation. However, midway through, it always fails
    When I tried to uninstall it, it seemed to do it, but before it could complete, it started to reinstall itself and then an error message came up, error message "2330", to be exact.
    Andrew, those symptoms (the repair install on launch and the 2330 when trying to do a proper uninstall) both suggest a damaged program file that the repair install (when launching iTunes) can't replace, and the uninstall (using add/remove programs) can't remove.
    When you (try to) do the uninstall, does the 2330 message say which file it is having trouble with?

  • Strange problem in executing procedure using dblink

    I have this strange problem coming in the execution of a procedure accessed using dblink. I will try to explain the scenario. We have one procedure in our schema which is executed using a dblink from another database as we have a integration of systems. This was working fine but after we did a fresh export and import of this schema as we migrated our database to a new better configuration DB server, the execution of this procedure is hanging when it is executed from the dblink from the other database. I hope, I have been able to explain the scenario.
    I hope, my question is clear.
    Please, help in solving the doubt.
    regards

    No starting version number.
    No current version number.
    No indication of whether the link is valid and you can SELECT across it.
    No error message of any kind.
    Nothing from your alert log.
    No indication of whether you have a global names issue.
    Please do the research required to identify the nature of the problem, check the related docs at metalink, and if you still have a problem give us the rest of the story.
    Then perhaps we can help you.

  • VB-Java bridge strange  problem

    Hi,
    We are using JCom for our application. Our server is a weblogic 6.1 app server
    hosting EJB's and our client is a Visual Basic(VB) trying to access these EJB's.
    I am using "zero client installation" programming model.
    I am getting a strange problem. When I run my jcom bridge from the startup classes
    of Weblogic(using Runtime.exec()) the bridge is not accepting requests from VB.
    But if I run the same bridge from a command line DOS prompt, the bridge accepts
    the request from VB. I have ensured that in both cases the classpath/path variables
    are properly set.
    WOULD REALLY APPRECIATE, if someone can give inputs on this strange issue.(I am
    running my VB client on Win 2k platform and also my weblogic server runs on the
    same m/c).
    reg
    nilesh

    Hi,
    Am also facing java.lang.OutOfMemoryError: Java heap space. My JSF page retrieves more than 5000 records, the list is iterated and existed the controller(or action) , but throws this exception while displaying the JSF page. I have tried to increase the ram size, but no solution... Can any bosy please help me on this, would really appreciate.
    Thanks,
    Shan

  • Strange problem with reminders when waking iMac

    I'm having a strange problem with reminders in Mountain Lion, and I thought someone might be able to help. If I have a reminder set, and it goes off when my iMac is asleep, after waking the iMac I can't dismiss the reminder. I can click on "Close" or "Snooze" once, and there is the puff of smoke like it has been dismissed, but the notice is still on the screen (even in the Dashboard view), and hover over it only gives the spinning beachball and I can't access notifications with the two finger swipe. So far, restarting my iMac is the only solution I have found to this situation.
    Is anyone else having this happen? Is there an easy solution? Thanks!

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • Strange problem with drag&drop!!

    hello i hope u can help me.
    i have a strange problem but not like the other users with drag&drop in Leopard..
    mine is not exactly like this:
    http://discussions.apple.com/thread.jspa?threadID=1198982&tstart=3538
    i can hold left click and move files but when i need to "drop" them at the .app's window the app rejects the file back! (some of the applications not all!)
    what i mean in examples is:
    i cannot drag&drop anything in the VLC's player window but i can inside the vlc's "controller" window
    i cannot drag&drop a picture in preview
    i cannot drag&drop any file in photoshop's new file/empty canvas
    i cannot drag&drop a mp3 file in itunes but i can drag&drop a full album folder(only in playlist,not in the player window)!
    and i can describe more to show u that it's not about vlc or preview or PS problem, but finder's/leopard problem.
    (i thought in the 1st, that it's vlc's problem and i downloaded a lot of versions!)
    all the other programs works well, for example i can drag&drop a video to final cut or motion
    i can do the same in iMovie (at the space it says"drag&drop media here etc)
    and of course i can drag&drop files to desctop,hard disks etc.
    i can copy/paste text etc (i can copy/paste texti can copy/paste texti can copy/paste texti can copy/paste text)
    i am trying to give you an idea, suggest me what else should i try in order to focus where exactly the problem is!
    i hope u give me a solution cause drag&drop is usefull!
    thank you
    in order to help u, i will describe what i tried so far:
    1)repair permissions
    2)trash com.apple.finder
    3)terminal solution like this: (didn't worked)
    sudo su -
    cd /
    rmdir tmp +*(rmdir: tmp: No such file or directory)*+
    ln -s tmp /private/tmp

    alex74d wrote:
    hello and thanks for your reply
    but why you quote only the part of VLC?
    One thing at a time. Occam's razor.
    and why u believe this is normal?
    i am sure that VLC can drag & drop subtitles or the movie in the player window.
    and when i say sure, i mean 100%
    I disagree. I have tried this since reading your post, on all my VLC versions. It does not work.
    You can, however drop a movie onto the VLC icon in the dock. That works fine.
    RealPlayer accepts a file dropped on it. I just checked it.
    Not all apps accept a file on their output window. Usually only the input window.
    i started my windows bootcamp partition before and i saw this works.
    and i remember trying VLC in tiger a lot of years before, this was ok.
    and yes of course it would be also normal to drop a picture in the photoshop canvas.
    so what is not normal here is my problem, if u can help i'm happy if you cannot please don't confuse it more
    (sorry if i sound "unclear", english is not my 1st languange)
    I will check VLC next time I run Tiger and let you know.
    Message was edited by: nerowolfe

  • Strange problem with color measure in Mac.

    Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
    I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
    Thank you for your time
    Marcelo.

    Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
    is there any way to make the OS X color measure tool to measure the original color values
    You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
    i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
    Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

  • Strange Problem with Mail & Address Book

    Hi,
    I'm having a strange problem with Mail & Address Book.
    When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
    I get this log from console;
    2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
    If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
    2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
    Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
    2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
    2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
    If I quit Address Book, i'll get this from console;
    2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
    I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
    Can somebody help!!!
    Please?!

    Hi dp13.
    Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
    /Library/Address Book Plug-Ins/
    ~/Library/Address Book Plug-Ins/
    To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
    ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
    <hr>
    Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
    Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
    About the Mac OS X 10.4.10 Combo Update
    Mac OS X 10.4.10 Combo Update for PowerPC
    Mac OS X 10.4.10 Combo Update for Intel
    After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
    Take a look at the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

  • Strange problem with Contribute 3

    I have a strange problem with Contribute 3. One of my page
    editors changed a single page on my web site and submitted it for
    review. When I go to review the page, 75 pages show up to be
    reviewed. If I try to edit the actual page that was changed, it
    tells me I can't approve the changes until I accept the changes on
    the other pages and each of those pages gives the same message...an
    infinite loop. The only way to get around this is to reject each
    page individually and this took several hours. She tried again and
    the same thing happened. How can I fix this problem. I think it is
    a bug in Contribute because 74 of these pages had no changes to
    them.

    Still haven't solved this, even the backup no longer works...Would anyone be interested in helping me by letting me send them a project, making one simple change for me, then saving the project, returning it to me and exporting it as wav?
    this would help me tremendously...
    let
    me
    know
    if
    u
    can
    help
    anyone be interested in helping Mr

Maybe you are looking for