Job Chaining and Quickcluster

I always get
Status: Failed - HOST [Macintosh.local] QuickTime file not found.
after the first part of the job is successful.
If I just submit with "This Computer" it works fine. Original file is ProRes 422, first job uses ProRes 422 to scale it down to 480x270. Second job compresses to h.264. I found some info on this board from 2008 saying that job chaining and quickclusters don't work together. Is that still how it is? that's really useless..
I also found this from Jan 2009
David M Brewer said:
The reason the second rendering is failing is.......this has happen to me a few times until I figured it out.....make sure you set the dimension to the video in the h.264 settings, set to the same size as the Pro Rez dimensions.
For the most part the dimensions are left blank for the second link, h.264. And don't use 100% of source. Put the physical numbers into the spaces. When you link one video to another, the second codec doesn't know the specs settings you made for the first video settings.
Also make sure you (at least check) set the audio for the second video. I usually have the Pro Res do the audio conversion and just past-through to the second video settings. Again it can happen the the audio is disable in the h.264 settings. This has happen a few time for me........... Check and double check your settings!
He doesn't mention anything about with or w/o Quickclusters, but I tried what he said and could not get it to work with quickclusters...
Anyone got any new info on this?

Studio X,
Thanks for taking the time to run some tests and post your results.
I'm finding the same results with converting ProRes422 to mp4, But...
Other codecs are giving me very different results.
I've run some random tests to try to get a grip on whats happening.
First I was playing around with the # of instances. I've read here and on Barefeats that (at least for my model MacPro) the instances should be set to (# of processors/2), so I've been using 4 for quite a while now and thought I'd test it for myself.
A single 5min ProRes422 1920x1080 29.97 file to h.264
This Computer- 15:28
2 Instances- 14:56
3 Instances- 13:52
4 Instances- 14:48
5 Instances- 13:43
6 Instances- 13:48
7 Instances- 13:58
In this case 5i was the fastest but not using a Quickcluster wasn't far off
A single 2m30s ProRes422 1920x1080 29.97 file to h.264
This Computer- 3:19
2 Instances- 3:45
3 Instances- 3:45
4 Instances- 3:45
5 Instances- 3:50
6 Instances- 4:00
7 Instances- 4:00
Interesting...not using a Quickcluster is fastest
A single 2m30s ProRes422 1920x1080 29.97 file Scaled down using original codec
This Computer- 5:20
4 Instances- 4:10
5 Instances- 4:10
7 Instances- 4:11
A single 1m30s ProRes422 1920x1080 29.97 file to mpeg-2
This Computer- 2:12
5 Instances- 2:10
When Quickclusters are faster, 4-5 instances does seem to be the sweet spot(again for my setup).
In the mpeg-2 test, I should have used a longer clip to get a better test but it was getting late and I was just tring to get an idea of the codecs usage of my resources. I was also monitoring CPU usage with Activity Monitor in all tests.
Now multiclip batches:
I forgot to write down the length of the clips in this first test but it consisted of 8 ProRes 422 clips. 3 about 1m long and the rest between 13s and 30s
8 ProRes 422 clips to mp4
This Computer- 11:25
4 Instances- 5:16
Same results as Studio X
Next tests with 5 clips(total 1m51s)
5 ProRes 422 clips to h.264
This Computer- 5:00
4 Instances- 4:52
5 ProRes 422 clips to mpeg-2
This Computer- 2:55
4 Instances- 3:01
5 ProRes 422 clips to DV NTSC
This Computer- 6:40
4 Instances- 5:12
5 ProRes 422 clips to Photo Jpeg
This Computer- 2:44
4 Instances- 2:46
I re-ran the last test with 7 clips because of the time it took reassemble the segmented clips
7 ProRes 422 clips to Photo Jpeg(total 3m14s)
This Computer- 4:43
4 Instances- 3:41
One last test,
A single ProRes 422 clip to Photo Jpeg(4:05;23)
This Computer- 5:52
4 Instances- 4:10
Let me start off by saying it is clear that there are many factors that effect compression times such as # of clips, length of clips, and codecs, but here are some of the things I noted:
1)Some codecs themselves seem to be "more aware" of the computers resources than others.
When I compress to h.264 w/o a cluster it will use about 80-85% of all resources
When I compress to h.264 with a cluster it will use about 90-95% of all resources
When I compress to PhotoJpeg w/o a cluster it will use about 20-25% of all resources
When I compress to PhotoJpeg with a cluster it will use about 80-85% of all resources
2)The time it takes to reassemble clips can be quite long and could effect overall speed
In the very last test, compressing a single file to photoJpeg using 4 instances took 4m10s. Watching Batch Monitor I noted that it took 2m0s to compress and 2m10s to reassemble.Wow...
It would be interesting to see how the disassemble/reassemble of bigger and larger batches using clusters effect overall time. But that would take some time.
I think the thing I will be taking with me from all of this is your workflow is your own. If you want to optimize it, you should inspect it, test it and adjust it where it needs adjusting. Now if anyone has the time and was to run similar tests with very different results I'd love to know about it...

Similar Messages

Backing up Jobs, Chains and Programs in Oracle Job Scheduler

What is the best way to back up Jobs, Chains and Programs created in the Oracle Job Scheduler via Enterprise Manager - and also the best way to get them from one database to another. I am creating quite a long chain which executes many programs in our test database and wish to back everything up along the way. I will also then need to migrate to the production database.
Thanks for any advice,
Susan

Hi Susan,
Unfortunately there are not too many options.
To backup a job you can use dbms_scheduler.copy_job. I believe EM has a button called "create like" for jobs and programs but I am not sure about chains and this can be used to create backups as well.
A more general purpose solution which should also cover chains is to do a schema-level export using expdp i.e. a dump of an entire schema.
e.g.
SQL> create directory dumpdir as '/tmp';
SQL> grant all on directory dumpdir to public;
# expdp scott/tiger DUMPFILE=scott_backup.dmp directory=dumpdir
You can then import into a SQL text file e.g.
# impdp scott/tiger DIRECTORY=dumpdir DUMPFILE=scott_backup SQLFILE=scott_backup.out
or import into another database (and even another schema) e.g.
# impdp scott/tiger DIRECTORY=dumpdir DUMPFILE=scott_backup
Hope this helps,
Ravi.

Restart in Job chains and managing DST

Hi,
1) Given a 5 step job chain, if step 3 fails how is this handled in CPS? The following steps are chained but can the errored step be fixed and rerun to continue the job chain processing?
2) How is day light saving handled for particular jobs. Is there anywhere this is captured in the detailed job request form solman?
Regards,
Esha

Hi,
1) Given a 5 step job chain, if step 3 fails how is this handled in CPS? The following steps are chained but can the errored step be fixed and rerun to continue the job chain processing?
-- Yes, you can restart at any step of Job chain. (Not not at call level, remember one step might have multiple call inside it)
2) How is day light saving handled for particular jobs. Is there anywhere this is captured in the detailed job request form solman?
-- Use GMT timezone to submit jobs. There is nothing on redwood which can solve day light saving. It alwasy has to be at OS level. But redwood has all timezones availabe and you can submits job in any timezone.
Regards,
Sunil Rohit

How to Schedule a Job Chain to start automatically on SAP CPS.

Hi,
I did a job chain and i want to run automatically on sap cps Tuesday thru Saturday at 6:00 a.m., i make a calendar on sap cps with this specific options but the job chain doesn't start running. I don't know if i need to do something more, so if someone can give a little help with this i will apreciate a lot.
Thanks,
Omar

It finished ok but on the operator message i got the following message:
Unable to resubmit this job.
Details:
com.redwood.scheduler.api.exception.TimeWindowExpectedOpenWindowException: CalculateNextClose should only be called on an open time window
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectionInt(TimeWindowMethodImpl.java:388)
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectInt(TimeWindowMethodImpl.java:249)
at com.redwood.scheduler.model.TimeWindowImpl.calculateNextCloseIntersectInt(TimeWindowImpl.java:212)
at com.redwood.scheduler.model.method.impl.SubmitFrameMethodImpl.calculateNextInt(SubmitFrameMethodImpl.java:178)
at com.redwood.scheduler.model.SubmitFrameImpl.calculateNext(SubmitFrameImpl.java:176)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitSubmitFrameJob(JobStatusChangePrepareListener.java:763)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitJob(JobStatusChangePrepareListener.java:637)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.processJobToFinalState(JobStatusChangePrepareListener.java:520)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.modelModified(JobStatusChangePrepareListener.java:233)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.informListeners(LowLevelPersistenceImpl.java:728)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectListRetry(LowLevelPersistenceImpl.java:207)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.access$000(LowLevelPersistenceImpl.java:38)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl$WriteDirtyObjectListUnitOfWork.execute(LowLevelPersistenceImpl.java:79)
at com.redwood.scheduler.persistence.impl.PersistenceUnitOfWorkManager.execute(PersistenceUnitOfWorkManager.java:34)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectList(LowLevelPersistenceImpl.java:102)
at com.redwood.scheduler.cluster.persistence.ClusteredLowLevelPersistence.writeDirtyObjectList(ClusteredLowLevelPersistence.java:59)
at com.redwood.scheduler.model.SchedulerSessionImpl.writeDirtyListLocal(SchedulerSessionImpl.java:648)
at com.redwood.scheduler.model.SchedulerSessionImpl.persist(SchedulerSessionImpl.java:626)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:32)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:13)
at com.redwood.scheduler.jobchainservice.JobChainService.childJobFinalStatus(JobChainService.java:223)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.childJobFinalStatus(ProcessServerRuntime.java:836)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.onMessage(ProcessServerRuntime.java:248)
at com.redwood.scheduler.infrastructure.work.MessageEnabledWork.run(MessageEnabledWork.java:104)
at com.redwood.scheduler.infrastructure.work.WorkerImpl.run(WorkerImpl.java:109)
at java.lang.Thread.run(Thread.java:534)

Error while scheduling the Email Alert JOB chain

Hi All,
I have defined a job chain in CPS and when i am going to schedule it then it is giving me error message.We have taken the trial version.
Please find the log attached below.
11:18:31 PM:
JCS-111004: Queue ETD.sapetd00_Queue has no ProcessServer with the required JobDefinitionType/Service/Resource for Job 932 (submitted from ETD.Z_MONI_BATCH_DP copy from 2009/12/30 18:22:23,113 Australia/Sydney) (submitted from Job Definition ETD.Z_MONI_BATCH_DP (Copy from 2009/12/30 18:22:23,113 Australia/Sydney)): Job Definition Type CSH/Service PlatformAgentService/"Empty"
JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Job) to an object in an isolation group
JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Chain Step) to an object in an isolation group
JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Parent Job) to an object in an isolation group Show error details
Thanks
Rishi Abrol

Hi
Are you logged into the correct isolation group ?
Ensure the process server is also assigned to the queue.
Regards

Process Chain and CPS

Hello all,
We are currently having a problem with submitting process chains. When the chain runs it does not display any of steps in the process chain and where they are running from the job we submit (RSI_START_BW_CHAIN) So what we see is that the PC has been submited and completes in say 17seconds...however everything is still running on the system...for example our CIF PC runs for 3hrs but alls we are able to see is that the job executed from CPS with no problem. I've been digging around trying to find clear documenation about PC and CPS with little luck. Am I approaching the job submission incorrectly? We are on 7.0.3.

Hello,
You should be using the RSI_RUN_BW_CHAIN job to start process chains. Maybe you can try that first. For the rest things should be straight forward. Depending on the BW backend systems you might encounter some issues, with BW 7 the synchronization has changed and you would be better of using one of the latest 7.0.4 versions (SP6 has just been released).
Regards Gerben

Process chain and Control M

Hi Gurus
We are designing process chain for our BW solution.
We have identified the dependancies of various loads which includes flat file loads and loads from R/3.
Now we would like to control ERP and BW jobs by Control M .
I have the following questions:
1. Which portion of BW process chain do we need to plug in to Control M. ? Do we need to connect the Meta chain to control M or different process chains to Control M?
2.When we create Process chain for BW, what is the best practice? Is it good to create small chains and connect them via Meta chain? or we have to create small chains only?
3. Can we include R/3 extraction Jobs and V3 Jobs in our BW process chain? so that they will trigger when we run the process chain?
4. If we decide to run V 3 jobs after every half an hour on R3 side then how often we have to extract data to BW? and how to catch correct delta without missing single record?
I would appreciate if you can help me with your knowledge.
Thanks
Kris

Hi Kris,
Control M is a third party scheduling tool provided by BMC software.
1) You have option to either include a meta chain or individual chains in Control M .
2) It depends on how your data is extracted. If you have any dependecy jobs on sourcre system, then it is better to create small process chians and include them along with your dependecy jobs in Control M
3)you can include R/3 dependency jobs and V3 jobs in Control M. Once those jobs are finished you can run BW process chains via Control M.
4)You have several scheduling options availalbe in control M to take care of your BW and R/3 jobs.
V3 jobs collect data from R/3 application tables and fill R/3 delta queue(RSA7). when you run BW process chain it will collect all the data available from R/3 delta queue.
If both jobs are running at same time, then it is better to apply some wait time on BW jobs(in process chians).
hope this helps

Can we schedule steps in Job Chain to run at a particular time of the Day.

Hi ,
We have created a Job chain for 3 steps.our requirement is we want to step 1 to run as per the schedule of Job chain but we want step2 to run on fri 2 gmt and step 3 to run on saturday 1 gmt.
is ther any setting in Job chain so that we can schedule subsequent steps to run at a particular time.
Regards
Rajesh

Hi,
You can add a timewindow to the jobdefinitions that you call in step 2 and 3, to restrict the start times for these jobs to the desired time.
Regards,
Anton.

Scheduling a BI job chain in Redwood

The problem I am having is we are trying to schedule a BI job chain via Redwood software and are not getting any response. Within Redwood, I have executed these jobs IMPORT_BW_CHAINS, IMPORT_BW_CHAIN_DEFINITION, IMPORT_BW_INFOPACKAGES using BI job chain 0fcsm_cm_10 which is defined in BI as a job chain. These jobs run to completion but nothing is moved into Redwood to schedule as you would see from a import of a CCMS job. When I run job RUN_BW_CHAIN using the same BI job chain ID I receive the below error. Not sure what Im missing or doing with the process to get to schedule the BI job chains with Redwood.
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "RSI.RSIEXEC", line 1638
ORA-06512: at "RSI.RSIEXEC", line 1759
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 21
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 80
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_SYS_SQL", line 1200
ORA-06512: at "SYS.DBMS_SQL", line 323
ORA-06512: at "SYSJCS.DDL", line 1085
ORA-06512: at "SYSJCS.DDL", line 1118
ORA-06512: at "SYSJCS.DDL", line 1177
ORA-06512: at line 3
JCS-00215: in statement RSOJ_EXECUTE_JOB

I am also seeing the same issue
anton the last information you requested
The following products are installed in the Cronacle repository:
Product                                  Version    Status
Cronacle for SAP solutions               7.0.3      Production
Cronacle Forecast Module                 7.0.3      Production
Cronacle Reports Module                  7.0.3      Production
Cronacle &module Module                  7.0.2      development
Cronacle Mail Module                     7.0.3      Production
Cronacle Audit Module                    7.0.2 r2.2 Production
Cronacle Process Manager for Web         7.0.3      Production
Cronacle Module Installer                7.0.3      Production
Cronacle Repository                      7.0.3.34   Production
Cronacle Monitor Module                  7.0.3      Production

Error in redwood job chain for Infopackage

Hi,
We have recently installed redwood for handling sap jobs and are able to run all the job chains with job step in abap program successfully.
However, for APO and BW job chains we have intermediate step for executing BW infopackage where the job is getting failed with the below error:
SAP/BW Error Message: rfc call failed 089: Job BI_BTC<infopackage_name>has not (yet ?) been started
The preceding abap job steps are getting executed successfully. After the infopackage step is failed the consecutive steps all fails.
This problem is common to all job chains with infopackage.
Any help is greatly appreciated.
Regards,
Sandeep.

Hello Anton,
We are facing the same problem: Same log error message.
The infopackage is correctly started and ended in BW.
Here our versions:
Redwood Explorer 7.0.4.2 SP2
BW :   SAP_BASIS 70016
           SAP_BW 70018
Do you think applying SAP CPS SP3 would solve the problem?
Or can we solve it by modifying some specific parameters?
Thanks in advance.
Regards;
Mathieu

SQL Developer 3.1: Job Chains - 2 Bugs.

Hi.
Just having a play with defining job chains in SQL Developer 3.1 and I came across these bugs...
1) When you try to define a new chain using SQL Developer you get, "ORA-01741: illegal zero-length identifier"
If you look on the SQL tab you can see that it is messing up the double quotes, placing two sets of double quotes around the chain_name.
BEGIN
    sys.dbms_scheduler.create_chain(
        comments => '',
        chain_name => '"TEST".""test_chain_3""'
      sys.dbms_scheduler.enable(name=>'"TEST".""test_chain_3""');
END;If you remove the extra quotes and run the code it works fine.
2) The job chain diagram seems to be case sensitive as far as the rule definitions are concerned.
If you follow the chain setup in SQL*Plus described here (http://www.oracle-base.com/articles/10g/SchedulerEnhancements_10gR2.php#job_chains), then check the associated diagram in SQL Developer it is displayed properly.
Now repeat the chain definition from SQL*Plus, but this time define the conditions and actions of the rules in lower case (which is valid and functions as expected).
BEGIN
DBMS_SCHEDULER.define_chain_rule (
    chain_name => 'test_chain_1',
    condition => 'TRUE',
    action     => 'start chain_step_1',
    rule_name => 'chain_rule_1',
    comments   => 'First link in the chain.');
DBMS_SCHEDULER.define_chain_rule (
    chain_name => 'test_chain_1',
    condition => 'chain_step_1 completed',
    action     => 'start chain_step_2',
    rule_name => 'chain_rule_2',
    comments   => 'Second link in the chain.');
DBMS_SCHEDULER.define_chain_rule (
    chain_name => 'test_chain_1',
    condition => 'chain_step_2 completed',
    action     => 'start chain_step_3',
    rule_name => 'chain_rule_3',
    comments   => 'Third link in the chain.');
DBMS_SCHEDULER.define_chain_rule (
    chain_name => 'test_chain_1',
    condition => 'chain_step_3 completed',
    action     => 'END',
    rule_name => 'chain_rule_4',
    comments   => 'End of the chain.');
END;
/Now check the diagram again in SQL Developer and you will see that all the steps are present, but the links (rules) are not correctly displayed. Seems like it is case sensitive...
If you need any more info, please ask.
Cheers
Tim...
Edited by: TimHall on Feb 10, 2012 4:23 PM

I have confirmed your two test cases are indeed bugs and I have raised them. The first seems to be if you have a mixture of _ and lowercase characters in the name but we will look at other cases too. The second is that the parsing of the condition/action does not uppercase unquoted ids. The second can be cirumvented by using quotes etc.

How to setup job chain with time dependant steps

Hi
I need to setup the following job chain with next job step waiting until specified time before starting
Step 1 Job A Time 07:30 if complete go to job step 2
Step 2 Job B start time 09:00 if complete go to job step 3
Step 3 Job C start time 09:30 (end job)
Have tried to use a pre-condition in step 2 and 3 but that just caused thoes steps to be skipped.
can somebody point me in the right direction
Thanks in advance
Jon

Hi Anton/Babu
Thanks for your help, I managed to set this up by embedding multiple Job Chains with their own time window in a master job chain.
As we continue our roll out not sure how scalable the solution will be as you have to create multiple job chains for essentially the same job with the only difference being a specific time window.
I guess only time will tell.
Thanks for you help again guys
Jon

Restart/resubmit job chain waiting of a file event

Hi Experts,
how can I restart/resubmit a job chain waiting of a file event?
In my case the variables OriginalPath and FinalPath are used in job chain parameters as an Default Expression (waitEvents...). If I restart the job chain I get the message "Could not evaluate default value for parameter...".
We are using SAP-CPS Build M28.20-37214.
Regards
Mathias

Hi,
You probably want to restart it because there was a failure somewhere in the chain. In this case it is easier to not let the chain end in error, but to let it go to status Console using the "Request Restart" postcondition.
Then when the step is restarted, or the chain is restarted from the beginning, it is restarted within the original chain and it reuses the already determined parameter values.
Regards,
Anton.

Job Chain in RAC Environment

Hi,
i've a job chain defined in a RAC environment.
I need that all the steps of my chain are performed on the same instance.
How can i do this?
Now stepA run on the instance 1 and stepB run on the instance 2.
Thanks.

Again, If it is a file system write issue, use ACFS (11.2.0.x) to create a shared file system that all nodes can see. What are you using to delete/create these files? A shell script?
1) create an ACFS file system of sufficient size to handle your data
2) mkdir /some/acfs/location
3) using sqlplus create a database directory " create directory foo as '/some/acfs/location' "
4) put the file in this location
5) use UTL_FILE to delete AND create the file (see fremove() - http://docs.oracle.com/cd/E11882_01/appdev.112/e10577/u_file.htm)

URGENT:Process Chains And events Related

Hi All,
I have created a new process chain which is a normal ODS Process Chain.For that I started with the start Process and then created event in sm62 to trigger the start of process chain.Similarly,I have at the end of the process chain ,I have added 2 ABAP Programs ,one to mark the successful completion of process chain and another to mark the Error or Unsuccessful completion.For these programs,I maintaines Processvariants and here, we have utility Programs.So used the relevant utility program and created a program variant and Events ,One for successful completion of process chain and another to mark the Error or Unsuccessful completion.
But ,Now ,I find that when I trigger the eventin sm64,I find that the process chain is not being run.Is that any problem with the events I created.This is the first i am involved with creation of events in SM62.Can anyone help me in this regard.
Can anyone,tell me thatdo we need to do anything else apart from Creating events .Imean like assigning jobs and then Programs in the Step of that Job.
Please Kindly help me in this regard.It is very very urgent for me.Thank you.Points will be assigned.
Regards,
Samir

Hi,
I have tried in the same way you have said .I have maintained as after event and activated and scheduled.after that i triggered the event insm64.But still,I am not able to see the Load in RSMO.
I have just checked out in sm37.And found that some jobs have failed.I think this might be the reason for the Process chain to not run.
I am just pasting the error msg and solution.
Job BI_PROCESS_ABAP, waiting for event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_ABAP has been started by event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Then Another error for the another cancelled job is
Job BI_PROCESS_OR, waiting for event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_OR has been started by event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Please kindly help me if you understand the problem.
Thanks,
Samir

Job Chaining and Quickcluster

Similar Messages

Maybe you are looking for