Internal Conversion error excel-SAP

A request was made from our users if it was possible to make standard excel lay outs
This moment when running a report, the filters and subtotals dissapear after downloading to excel.
Apperantly it is possible to make a standard lay out in excel.
For this I :
- run my report
- go to change view --> excel
- select a standard excel lay out.
But when I download then to my hard disk and open the file, no data is in the file.
When I paste my data in it and save and try to upload it to SAP i get the problem internal conversion error
Anybody has an answer for me how to proceed?
many thanx,
Stef

Hi Amit,
If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
Regards,
Ravi

Similar Messages

  • Currency conversion error in SAP HANA

    Hi,
    I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
    I added a calculated column as follows:
    When i click on "OK", i get error -
    The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
    and checkbox "calculate before aggregation" get unchecked. See screenshot below:
    Please suggest what could be reason? Thanks in advance.
    Regards,
    Amit

    Hi Amit,
    If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
    By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
    Regards,
    Ravi

  • "500 internal server error" after adding custom fields to Address page

    I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
    we also extended the Badi HRPAD00INFTYUI
    custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
    we get the following error:
    "500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
    "Area8" is one of the custom fields we added in PA0006 (Address infotype).
    any idea what is wrong?  maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
    T.

    Hi Sasu,
    Its clearly saying contect binding error. Have you mapped  correctly from FcComponent to VcComponents.
    FcCompoenets for Model logic.
    Check the mappings correctly.
    If it is complete custom or new field then there will be could of steps.
    1) Reimport the model
    2) map new field to FcComponent
    3) Bind new Fields from Fc to Vc
    Rgds
    -SS

  • HTTP 403 Service Error, HTTP 500 Internal Server Error

    My scenario is:
    Rfc adapter --> XI --> WebService
    I am get the following error(403,500) at the Call adapter. I like to know whether the following error occurs due to the timing out occuring as the client is not sending back a response? Any suggestions/help would be appreciated.
    <SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
      <Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
      <Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
      <Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
      <Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
      <Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
      <Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
      <Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
      <Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
      <Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
      <Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
      </SAP:TraceHeader>

    from SM59 I tested the connection of INTEGRATION_DIRECTORY_HMI(HTTP connection to ABAP system)
    detail:
    staus HTTP response 500
    status text : internal server server
    duration test call 17173 ms
    Please help me out to resolve this issue

  • I got "500 Internal Server Error " as Response in HTTP Client Prog

    In my Java Server Proxy the following are the configurations that I followed right from SLD: Please help me where I went wrong:
    In SLD->Business Landscape:
    Web As Java,
    ->Technical System: Web As Java.
    created Product and Software Component version accordingly.
    In IR->created Data types and Message Types of same Data type. 
      In Message Interface created Inbound synchronous--specified both input and output message there
      In Message Mapping-> selected source and target message types and done the mapping
      In Interface Mapping->Selected source and target interfaces->read interfaces; In request tab->selected source msg and selected mapping program of type Fatal Error: com.sap.engine.lib.xml.parser.Parser</SAP:P3><SAP:Stack>Während des Anwendungs-Mappings com/sap/xi/tf/_Folder_MM_ wurde eine com.sap.aii.utilxi.misc.api.BaseRuntimeException geworfen: Fatal Error: com.sap.engine.lib.xml.parser.Parser.</SAP:Stack></SAP:Error>
    =========================
    Thanks a lot

    Hi I got this as result when my Pyload is like what you said: <ns0:Foldername_MT xmlns:ns0="http://jps.com">
    <name>
    <XISystemhost>\<xyzdir>
    </name>
    </ns0:Foldername_MT>
    ===================
    and for that I got:
    Result:
    http-Status:  500 Internal Server Error
    Payload:
    <SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code><SAP:P1>503 </SAP:P1><SAP:P2>Service Unavailable</SAP:P2><SAP:AdditionalText>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Transitional//EN&quot;&gt;
    &lt;html&gt;
    &lt;head&gt;
         &lt;title&gt;Error Report&lt;/title&gt;
    &lt;style&gt;
    td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
    A:link
    A:visited
    A:active
    &lt;/style&gt;
    &lt;/head&gt;
    &lt;body marginwidth=&quot;0&quot; marginheight=&quot;0&quot; leftmargin=&quot;0&quot; topmargin=&quot;0&quot; rightmargin=&quot;0&quot;&gt;
    &lt;table width=&quot;100%&quot; cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; border=&quot;0&quot; align=&quot;left&quot; height=&quot;75&quot;&gt;
    &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt;
        &lt;td align=&quot;left&quot; colspan=&quot;2&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;4&quot; color=&quot;#666666&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;503 &amp;nbsp Service Unavailable&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
    &lt;/tr&gt;
    &lt;tr bgcolor=&quot;#3F73A3&quot;&gt;
        &lt;td height=&quot;23&quot; width=&quot;84&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
        &lt;td height=&quot;23&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
        &lt;td align=&quot;right&quot; height=&quot;23&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#FFFFFF&quot;&gt;&lt;b&gt;SAP J2EE Engine/6.40&amp;nbsp;&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
    &lt;/tr&gt;
    &lt;tr bgcolor=&quot;#9DCDFD&quot;&gt;
        &lt;td height=&quot;4&quot; colspan=&quot;3&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
    &lt;/tr&gt;
    &lt;/table&gt;
    &lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;
    &lt;table width=&quot;100%&quot; cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; border=&quot;0&quot; align=&quot;left&quot; height=&quot;75&quot;&gt;
    &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt;
        &lt;td align=&quot;left&quot; colspan=&quot;2&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;3&quot; color=&quot;#000000&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;The requested application, JPR, is currently unavailable.&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
    &lt;/tr&gt;
    &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt;
        &lt;td align=&quot;left&quot; valign=&quot;top&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#000000&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;Details:&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
        &lt;td align=&quot;left&quot; valign=&quot;top&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;3&quot; color=&quot;#000000&quot;&gt;&lt;pre&gt;&amp;nbsp;&amp;nbsp;No details available&lt;/pre&gt;&lt;/font&gt;&lt;/td&gt;
    &lt;/tr&gt;
    &lt;/body&gt;
    &lt;/html&gt;
    </SAP:AdditionalText><SAP:Stack>In der HTTP-Antwort liegt der Status-Code 503 mit der Beschreibung Service Unavailable vor</SAP:Stack></SAP:Error>
    =========================================
    What is that? Can u help me!!!
    Thanks

  • 500 internal server error while Export wedbdynpro content into Excel.

    Hi Experts,
    my requirement is export webdynpro content into excel sheet, so for this what i have did is
    First step:
    ) created an Extneral library DC
    2) imported the JARs to the libraries folder of the External Library DC project
    3) Right-click on each of the JARs imported to the project and added them to the public part.
    Second step:
    1) Createed a new Reuse Web Dynpro DC
    2) Created a new public part, selecting the "Can be packaged into other build results" option
    3) extrcted the full content (folders and class files) to root folder
    4) Imported the folders and files to the src/packages folder
    5)binded the attributes, created 3 methods and writen the code for those methods.
    Third Step:
    1) created one more EXPORT EXCEL DC
    2) ADDED LIB jar dc and Reuse DC IN used dc's
    3) created usedwebdynpo component and binded attributes to Table VIEW and writen the code for exposing table values.
    After this build and deployed i am getting clasnot found error
    so what i have did now is
    Fourth step:
    1)Created "J2EE Library DC"
    2) Refered "External Library DC" into J2EE Library DC.
    3) Deployed "J2EE Library DC"
    4) Refered this one in my Web Dynpro DC by giving Library Reference.
    now when i deploy and run what happend i am getting
    500 Internal Server Error SAP J2EE Engine/7.01 
    Application error occurred during request processing.
    Details:   com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/export_file_excel_7.
    Exception id: [00215E78C4C0006D00000AD9000E00F00004887F642A32FE]
    Any one can tell what could be the problem.

    Thanks for sharing the solution.

  • 500 Internal server error on Export to Excel

    Hello All,
    I have implemented Export to Excel using this tutorial:
    http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproJava-ExportingTableDataUsingOn-DemandStreams-SAPNW+7.0
    However, after deploying the application, it simply throws 500 internal server error. I have followed each step carefully but I guess something is missing or I am doing it wrongly. How should I go about resovling this issue? I have been trying to fix this since yesterday and yet no success.
    As it is failing right after the deployment that means doInit() method of my view is not able to execute the method mentioned below:
    wdThis.wdGetExportExcelCompInterface().initialize(wdContext.nodeVn_OutputTable(), getColumnInfos());
    I have defined getColumnInfos() method in the view but not sure why it is failing? Any thoughts on this? Has anyone implemented this? If not, please direct me to some simple export to excel code snippet or document. I have been struggling to implement simple Export to Excel on table. (I am not using RFC. The data is coming from KM APIs)
    Ameya

    Dear Ameya,
    For Comunication between DC's, you should use the other DC's as Used Webdypro Component. If you are using with different scenario with webdynpro reference, then please have a look at below document might help to resolve your issue.
    http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddf20bb211d72e10000000a1553f6/content.htm
    Adding a WebDynpro DC as used Component to a portal app
    Using Development Components in WebDynpro components - runtime failures
    Best Regards
    Arun Jaiswal

  • SAP portal 7.3 KM content - 500 Internal Server Error

    Getting 500 Internal Server Error for KM content.
    Here is error in Log file.
    Cannot process an HTTP request to servlet [prt] in [irj] web application.
    [EXCEPTION]
    java.lang.NoClassDefFoundError: com/sap/ip/bi/km/repository/manager/skwf/bw/PropertyMapper : cannot initialize class because prior initialization attempt failed

    Hi,
    This is the error which usually comes after system upgrade.
    Please go through the below KBAs and verify in your system:
    2002334 - java.lang.NoSuchMethodError: com.sapportals.wcm.portal.connection.KmConnection.handleRequestWithoutSettingEncoding
    1786917 - Cannot open irj/portal application and java.lang.NoSuchMethodError exception reported in default trace file
    BR,
    Anurag

  • 500 Internal Server Error for Team under MSS SAP portal !!!

    Dear Experts,
    I'm trying to access Team under MSS from Portal, It throughs 500 Internal server Error as shown below.
    we are running EP 7.3.
    500   Internal Server Error
    The initial exception that caused the request to fail, was:
    Java.lang.IllegalArgumentException: Not a valid view element suffix RequestId0;4
        at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.getClientUIElementId(AbstractAdapter.java:1181)
        at com.sap.tc.webdynpro.clientserver.uielib.graphics.uradapter.BusinessGraphicsAdapter$ImageMapArea._getRuntimeId(BusinessGraphicsAdapter.java:1312)
        at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.getId(AbstractAdapter.java:351)
        at com.sap.tc.webdynpro.clientserver.uielib.graphics.uradapter.BusinessGraphicsAdapter$ImageMapArea.getParameter(BusinessGraphicsAdapter.java:1377)
        at com.sap.tc.ls.renderer.ie6.LSImageMapRenderer.renderImageMapAreaFragment(LSImageMapRenderer.java:362)
        ... 155 more
    See full exception chain for details.
    Failed to process request. Please contact your system administrator.
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error
    Please let me know any configurations missing.
    Thanks in advance.
    Regards,
    Mahee.

    Issue is fixed, Refer sap note 1662200
    Its available  in SP for SAP PCUI_GP 633.
    The problem originates from class
    FcTeamCalendar. For some reason, the character ';' is no longer valid
    in the xml, hence, gets rejected by the Java WD runtime. The string is
    parsed against the pattern "[a-zA-Z_0-9]*". Hence, I have replaced ';'
    by '_'. The IGS colleagues have confirmed that this should be working
    fine now.
    If you have NWDS available, here are the manual steps to make this
    change:
    1. Edit class FcTeamCalendar.java.
    2. Replace "private static final String SEPARATOR = ";";" by
               "private static final String SEPARATOR = "_";"
    3. Save your changes, rebuild and deploy.

  • Internal server error while connecting SAP's customer financial fact sheet with iOS device

    Hi all,
    I am trying to connect SAP's customer financial fact sheet latest ( version 3.7)   with iOS phone/iPAD (version 7.1) but it shows internal server error,
    when trying to connect  Neither "Gateway (direct)" nor "SMP Cloud" enabled with port 80/443.
    On other hand my android devices with this app is working ok.
    Trace Log is below:
    2014-09-11 11:27:58.298 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
    2014-09-11 11:27:58.295 Debug Request http://server:8010/url t finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
    response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server . The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server  in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
    2014-09-11 11:27:58.286 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
    2014-09-11 11:27:56.239 Debug DE:Using SUP Manual User
    2014-09-11 11:27:56.238 Debug DE:Get svcDoc URL http://server:8010/url
    2014-09-11 11:27:56.216 Debug DE:startSAPODataRequest CompanyCodeCollection
    2014-09-11 11:27:56.204 Debug DE:SAPODataAccess dealloc CompanyCodeCollection
    2014-09-11 11:27:56.198 Debug DE:CustomerCardsViewController refresh
    2014-09-11 11:27:52.600 Debug Logging/Tracing on
    2014-09-11 11:27:19.792 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
    2014-09-11 11:27:19.787 Debug Request http://server:8010/url  finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
    response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server  in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
    2014-09-11 11:27:19.768 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
    2014-09-11 11:27:12.717 Debug timeout
    2014-09-11 11:27:12.681 Debug timeintervalinminutes: 23506917 timeoutInterval: 0
    2014-09-11 11:27:12.679 Debug applicationGoesToForeground
    Can anyone help me how to troubleshoot this error?
    Any help will be highly appreciated.
    Thanks
    Mahesh

    are these LUNs shared or standalone?
    I don't think it's really wise to have more than one DSM on the same server, so you're mixing the EVA and 3par DSMs and on 2003...
    other than ensuring that HBA firmware and drivers are all up to date and DMS drivers are at the latest, not much else you can do from the host side...maybe update the storport.sys driver to the latest for that OS
    are you sure that the HBAs are in fact supported/compatible with both storage back-ends? what about their driver/firmware/DSM versions - some SANs are very picky when it comes to this stuff, check the interop matrixes to find out
    overall, if you don't need SAN connection to one of these storage back-ends, I suggest you get rid of it and its DSM

  • 500 SAP Internal Server Error, in WD report while launching SC in SRM 7.01

    Dear SAP WD Gurus,
    We have recently upgraded the SRM 7.0 to EHP1 after that we are getting ths below
    We have created Z WD application genarating report in SRM 7.0, we have provided a hytep link in row to display shopping cart in the report. on click of display we are getting error as below on Browser (Portal)
    500 SAP Internal Server Error
    ERROR: WebDynpro Exception: URLhttp//  XXXXXX  may contain fatal script (termination: RABAX_STATE)
    where the URL is properly working fine if we run through browser.
    and even getting dump as below
    What happened?
        The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CX_WD_GENERAL=================CP' has to be
        terminated.
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
        therefore caused a runtime error.
        The reason for the exception is:
        WebDynpro Exception: URL
        http://isvsapeadev.ad.infosys.com:50200/irj/portal/infysrm?navigationtarget=rol
        ES%3A%2F%2Fportal_content%2Fcom.infy.nonsparsh%2Fcom.infy.srm%2Froles%2Fcom.inf
        y.requisitioning_urp_general%2Ffl_navi%2Fcom.sap.pct.srm.core.iv_shoppro
    Please help in resolving this
    Thanks in advance
    Vinod
    Edited by: Vinod Malagi on Jan 11, 2012 11:27 AM

    Hi Vindo,
    FYI this is the wrong forum. Even though the problem started taking place after an UPG/EHP, this is still a matter for the Portal team, not the ugprade one
    Anyhow I'll try to help you. This dump is mostly seen when you call the webdynpro from a non-supported browser. Please check PAM (http://service.sap.com/PAM) for the supported ones.
    Are you using a SM59 call to the WD? You can not connect to a Webdynpro
    application via SM59 as SM59 is not a supported. You can only use the browser visible in the PAM to access WD. /* e.G. IE 6.0, IE 7.0, Firefox */
    I hope this helps
    Best regards,
    Tomas Black

  • 500 Internal Server Error for ArchiveLink Repository type SAP System Database

    Hi, All!
    I made all settings by SAP Note 595563 "Database storage for ArchiveLink" and set new repository for document type HRICOLFOTO (in view TOAOM_C).
    When I try upload photo by tr.OAOH or open repository in tr.CSADMIN I get error "500 Internal Server Error".
    When I see to the 3rd level ICM-log (tr.SMICM) I see full html response (in attached file).
    Is there any idea?
    Best regards,
    Valeriy.

    Hi Valeriy,
    Could you perform these steps and check the result
    Start transaction SICF.
    Go to "External aliases".
    Select "default_host".
    Select Create.
    External alias: /sap/bc/contentserver
    Description: HTTP Content Server interface
    Fill anonymous logon data.
    Select the target element /default_host/sap/bc/contentserver.
    Save your entries.
    Hope this helps.
    Regards,
    Deepak Kori

  • HTTP 500 - Internal server error - not able to Export BI report to Excel

    Hi,
    We just upgraded to HFM 9.3.1.4. Unfortunately we are not able to Export BI report to Excel (in Workspace and in BI Studio). We receive the error message "HTTP 500 - Internal server error" (this worked fine in 411).
    We are able to preview in PDF and HTML, but not Export to Excel. We also just restarted the services for workspace and web analysis, but still the same issue.
    Anyone have any idea what is wrong?
    Thanks for your help!

    Hi Varun,
    We just restarted the financial reporting services, but still receive the same error message.
    Any other idea?
    Thank you for any help.

  • SAP BPC 5.1 SP2 Http 500 internal server error - page can not be displayed

    When our Sysadmin service account are restricted to the app server and the database server ( as they should be in a secured environment) no client
    could reach the web site to even use the Osoft directory . We get a Http 500 internal server error - page can not be displayed . This is for a new multiserver install. Is there a problem on the website security or .net configuration?

    Yes the install was done by the SAP install consultant but now we are getting an error when we restrict the Sysadmin ID. Server diagnostics and other tests on Appshell passed as well.

  • INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. in transaction PBWW

    Well while running a transaction PBWW when we click on create button it opens the word document with the
    text in it but suddenly the text is gone and it is showing a error which is INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL.
    how can it be resolved????
    Thanks And regards
    Amit

    Friend,
    See this line from OSS#427615:
    Note:
    This note is a continuation of the correction from Note 402195 (Stabilization of the Word interface). Thus, the correction from Note 402195 is an absolutely necessary prerequisite for this note.
    i'm about to sure that if you implement first 402195 than 427615 problem would be solved.
    Both OSS are made in continuation.

Maybe you are looking for

  • XI with ABAP stack only ?

    Looking at some very annoying problems with the XI Java Stack and applications (stability, memory consumption), following question comes to mind: is it technically possible to run an XI system without the Java stack ? How much functionality do we hav

  • How to use a file as storage

    Hi, I am creating an online address book system.I want to use a text file to store the details of users(Not a database). How can I accomplish this.Should i create a file for each entry.there will be fields like username,password,address,phone number,

  • IMac Dead - HELP!

    Last night my Daughters 17" iMac froze on her and she shut it down by holding down the power button - since then it will not reboot. When the power button is pressed I can hear the fan come on but the screen stays black and the keyboard will not resp

  • Unconfirmed Sales Order

    Hi, When we activate Credit check, upon saving of the order, if credit limit exceeds, the order is blocked and Credit Team can view the orders blocked. In our case, there are some Orders that are still for confirmation (not yet final), hence, should

  • Captions in book don't print

    I'm using iPhoto 5.04 to build my first book. It's complete and includes a total of 62 pages, plus the cover and title pages. I have a number of pages that use a 2 picture layout with a caption at the bottom of the page. When I print pages to proof r