Job set to rerun- how to coninue even if a failure

I have a job scheduled to run every 20 minutes. I have the job currently configured to rerun same occurrence. When one of the runs fail the job will not run again until I manually intervene.
How can I set the job to keep on schedule even if one of the instances fails?

Bill, Can you say me what kind of errors you are seeing with first job? I mean if those errors rectify with re-run, then you can create a event to re-run when a job fails and assign your first job to that. That way, the job will re-run the same instance and your dependency can also be met.
One more workaround, of course, it is purely based on the type of dependency. I mean if your second job not using any input from the first job, like your first job just pushes second one to run, then you can change the dependency type to "Completed" than "Completed Normally" which by default.

Similar Messages

How to pass parameters to the list of ESS Jobs that are in a Job Set?

All,
Oracle Fusion Application Version: 11.1.7.0.0
I am new to Fusion Apps (I was ADF Developer before this), got some hands on with Fusion Application. Need some help/guidance related to ESS Job. I have 2 custom ESS Job created (1st of type Sql Plus to query and spool the result into a file into local server and 2nd of type host script that accesses the spooled file and sends it to destination server). I've put these two job together in a Job set (Serial execution) and it works fine.
Requirement:
Whenever the Job set is executed, generated file should be appended with System Date and Time. Following are the two ways that are coming into my mind to achieve this.
Way 1. First job has to read the systimestamp (in desired format) from DB, do actual query execution, spool the resultset into a file named with time stamp details, place it in a local directory. As a part of completion of the 1st Job, 1st Job has to pass this systimestamp value to the 2nd Job (How?) so that it can pick the right file from local directory for its work.
Way 2. We should be able to create parameters at Job Set level (and this too should not be a constant value but dynamic, say sysdatetime) so that both the job can access this value.
Though I am getting some thought on how the communication between these two jobs should be happened, I don't know whether they are possible, if so, how to do.. Can anybody suggest? Your help would be appreciated!

Is the timestamp used in the processing other than uniquely identify the file ? If it is then do note that you may need to take into account timezones, slight differences in the time etc. in your processing If not you could potentially use the request identifier or some other unique identifier instead.
In any case you can pass information between the jobs; for details refer to:
Defining and Using Job Sets Supporting Input and Output Forwarding in Job Sets
Using Parameters and System Properties
Using System Properties
SystemProperty (Oracle Enterprise Scheduler Service API Reference)
So depending on your requirements you could define job set step parameters, input / output forwarding or name value pairs on the ENVIRONMENT_VARIABLES system property.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

100pat wrote:
Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
Like I said before ask facebook or look at their support site to see if that is even a feature.

How to work even and odd number query

Plz explain how below worked even and odd query
2 ) why used subquery after from and which time we can use(what time of out put)
even
select * FROM (SELECT ROW_NUMBER() OVER(ORDER BY stud_id) as row ,grno,stud_id from stud_Enrollment) d
WHERE d.row %2=0
odd
select * FROM (SELECT ROW_NUMBER() OVER(ORDER BY stud_id) as row ,grno,stud_id from stud_Enrollment) d
WHERE d.row %2=1

Row_Number function returns the sequential number of a row
(By using partition of a result set, starting at 1 for the first row in each partition)
>> why used subquery after from and which time we can use(what time of out put)
When we need sequntial numbers, we can use row_number function. Put it into derived table and use this derived table after FROM clause (Same way it is used in your query)
CREATE TABLE stud_Enrollment (
grno int,
stud_id int,
stud_name varchar(20)
INSERT INTO stud_Enrollment
VALUES (101, 511, 'Dheeraj'), (112, 521, 'Vaibhav'), (132, 522, 'Lalit'), (124, 564, 'Amogh'), (143, 598, 'Sushrut')
SELECT * FROM stud_Enrollment
-- Result of your table
--grno stud_id stud_name
--101 511 Dheeraj
--112 521 Vaibhav
--132 522 Lalit
--124 564 Amogh
--143 598 Sushrut
-- Now we need to find out the rows which are at even position, ie row should be at position of 0,2,4,6,8 etc..
-- But we don't have sequential number here in your table result
-- So we can create one new column by using row_number function
SELECT
ROW_NUMBER() OVER (ORDER BY stud_id) AS row, --> additiona "row" column
grno,
stud_id,
stud_name
FROM stud_Enrollment
-- We got "row" column in below output
--row grno stud_id stud_name
--1 101 511 Dheeraj
--2 112 521 Vaibhav
--3 132 522 Lalit
--4 124 564 Amogh
--5 143 598 Sushrut
-- Now above table is used after FROM clause. It uses row column in WHERE part
SELECT
FROM (SELECT
ROW_NUMBER() OVER (ORDER BY stud_id) AS row,
grno,
stud_id,
stud_name
FROM stud_Enrollment) d
WHERE d.row % 2 = 0
--row grno stud_id stud_name
--2 112 521 Vaibhav
--4 124 564 Amogh
-Vaibhav Chaudhari

I know my network connection is fine and I've checked all the cables and that the tv is set to the correct source, but even though Apple Tv is on and responds with beeps when I hit the button, I see nothing on the screen. What do I do next?

I know my network connection is fine and I've checked all the cable connections and my television is set to the correct input, but even though the remote beeps when I hit the button, I see nothing on the screen. The troubleshooting section in the setup guide says to make sure that Apple Tv is connected to my network by choosing Settings>General>Network. How do I do this? What do I need to do to get everything back? I've been using the Apple tv for a while now, and suddenly it's doing this.

This is the iPod touch forum. I requested your posted be moved to the Apple TV forum
Using Apple TV

Job msg 608: job set to cancelled manually

hi all,
there is dtp from dso to cube(full load) which has failed with job log : job set to cancelled manually and the msg 608.
i couldnt find any locks, short dump etc.This is background job and there is no info. in sm21.
when i try to debug (from dtp monitor screen) the data is fine.there was a kernel update .
what can be the reason and how to fix it?
will the bg job info be seen in sm21?(as i dont see any info abt the background job in sm21)
Edited by: jumboash on Nov 24, 2009 6:48 AM

Hi,
check in Transaction SM36 and let me know the details
Regards,
Marasa.

My notification tone when set to 'Silent" is not working even when setup on lolipop

my notification tone when set to 'Silent" is not working even when setup .
My notification tone when set to 'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
- Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
- Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
1) Browse to www.BBM.com/support/blackberry
2) Locate the Need more help section is the bottom right of the page
3) Select Contact us for additional assistance
4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
Daniel

Photoshop Elements 11 boxed software installed once in Dec. 2012 won't install on new computer. Disk can't be read (tested on 3 different computers). How is that even possible of a meticulously clean, well-protected disk?

Dear Adobe,
I need your help!
On December 12th, 2012 I ordered (purchased) by mail an official copy of the boxed Adobe Photoshop Elements 11 software from B&H Photo (New York, NY). I installed it successfully without any problem on my then computer. I have enjoyed using the program since then, it’s great. This past week, however, that same computer died and I was force to buy a new computer (Windows 8.1).
To my big surprise, the Elements disk wouldn’t load off my DVD drive. The drive just kept “clicking” for 20 minutes. After trying several times from reboot, for an hour and a half, I then tried installing it on my laptop, just to see if my drive was faulty. No, it wasn’t. It too immediately went into an endless “clicking” routine trying to read the disk. And for one last try, I put it in my sister’s laptop and she got the very same result - endless “clicking”, no install. No computer could read the disk!!!
How is this even possible from a commercially made disk I used only once in 2012! The disk is meticulously clean, unscratched, unscuffed, put away in its original box and stored on my shelf in a cool place away from the sun!
Serial Number of faulty disk: 1057-4186-6029-0039-1511-3940
Is there anything you can do about this as I see no reason why I should be forced to spend over a $130 (in Canada) to replace a disk that worked only once!
Regards, Andre

copy your disc contents to a desktop directory. install from that directory.
if that fails, download the installation files:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How do i get rid of the emergency calls on my iphone and set it up, how do i get rid of the emergency calls on my iphone and set it up

I have an iphone and i turn it on and i can't seem to get passed the emergency calls bit i want to set it up how do i do this.

i get this when i try to download
This Connection is Untrusted
          You have asked Firefox to connect
securely to swdlp.apple.com, but we can't confirm that your connection is secure.
          Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
          What Should I Do?
            If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
          Technical Details
          I Understand the Risks

HT1386 I have double and triples of photo's on my iPad. Not all my pics but most of them. I was told that I screwed up in synching with iTunes when I initally set up. How in the **** do I get rid of all the dups? I cannot delete them from my iPad. HELP ME

I have double and triples of photo's on my iPad. Not all my pics but most of them. I was told that I screwed up in synching with iTunes when I initally set up. How in the **** do I get rid of all the dups? I cannot delete them from my iPad. HELP ME!

If the shows are in fact still on the pad, they will be found in the videos app, not the music or I tunes app. Look there and see if they are still there.
If you don't see them there, go to the searchlight screen ( farthest left home page) and type in the name of one of the shows. If it is on the pad, hiding somewhere, this will find it.
If they are not there, they should not be using up space.
To get them back onto your pad, plug in and sync again. Make sure you transfer purchases first. Before you sync, take a look at the video tab in your I tunes, and check what you want and don't want synced.

When I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

when I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

How is this even possible? Folders out of sync. Backlog command says in sync.

Two 2008 R2 servers. Been running DFS-R for about a year now. Generally no problems.
If I run the DFSRdiag backlog command on either server, for one particular folder, it says there is no backlog. The only problem with that is; on one server there are 11 files in that folder, on the other server, in the same folder, there are
15 files. How is this even possible!

Hi,
Please check if DFS Replication filter some special file from replication. For more detailed information, please refer to the article below:
Exclude files or subfolders from replication
http://technet.microsoft.com/en-us/library/cc758048(v=ws.10).aspx
If the issue still exists, please create a Diagnostic Report to see if there is any error message.
Create a Diagnostic Report for DFS Replication
http://technet.microsoft.com/en-us/library/cc754227.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

usaspirit88 wrote:
Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?
Try typing in your 10 didget cell number. Restart iPhone to get the prompt again.

I want to set a up smart album (in iPhoto "11) that auto-updates to a stream in iCloud that i have previously set up. How do i do this?

I want to set a up smart album (in iPhoto "11) that auto-updates to a stream in iCloud that i have previously set up. How do i do this?

I don't believe that this is possible right now.
iPhoto Menu -> Provide iPhoto Feedback for feature requests.

IPod classic is locked and wants a combination. Never set one. How do I unlock?

iPod classic is locked and wants a combination. Never set one. How do I unlock?

Is your iPad new in the sense of being brand new or is it the latest generation?
If you do not have very much on it you could connect it to iTunes on your computer (if you use one) and on the screen that pops up starting with the Summary tab click on the Restore button further down. Be sure to set it up as a new device? You will lose any saved data but at least it will unlock your device. Alternatively, you could could do it through Settings on your ipad. Either way, you my have to redownload your purchased apps again.

Job set to rerun- how to coninue even if a failure

Similar Messages

Maybe you are looking for