Job to process messages in Ready Status in SMQ2 ECC

Hello friends,
I am sending out messages from SAP ECC to PI using proxy . The messages are getting stuck in SMQ2 in READY status. I have to each time manually go and activate the queue to send the message out of SAP ECC.
Is there any job to process them automatically that needs to be set up in SAP ECC ?
Thank you,
Teresa

Hi,
Investigate why messages were strucked in Queues, there could be some reason, i suggest you too deregister and register queues once again.
if possible assign sepprate queue for proxy interface.
Regards,
Raj

Similar Messages

PPPI Process messages and check status

Hello.
Does anyone know of any method from xMII to get and check status of process messages sent to PP-PI?
E.g. check for status (has it been sent) and for any errors?
BR
Poul.

Hi Poul,
I found a few RFCs which might do the job and will list them here so you can test them:
PROCESS_MESS_DOWNLOAD
PROCESS_MESS_EXCHANGE
PROCESS_MESS_GET_RETURN_CODE
PROCESS_MESS_UPLOAD
My search method is kind of funny. I put PROCMESS* into the search pattern of a SAP_JCo_Interface action block to return a list of related action blocks. But since I can't use BAPI in SAP and must rely on SE37, I can't readily see the documentation to determine relevance. But I suspect you can take if from here. I would be interested in knowing what you come up with for these.
I also tried PROCMSG* and get these:
BAPI_HU_PROCESS_MSG
BAPI_HU_PROCESS_MSG_DIRECT
BAPI_LIKP_PROCESS_MSG
BAPI_LIKP_PROCESS_MSG_DIRECT
Where HU stands for Handling Unit, but I can't seem to find out what LIKP refers to.
Hope this helps and maybe together we can get the information.
Thanks,
Mike
Found a couple more
RSAP_GET_MSG_TEXT
RSSM_GET_MSG_TEXT
You may also be able to use RFC_READ_TABLE, but I do not know the table structures which would be of interest.
Edited by: Michael Appleby on Jul 16, 2008 3:07 PM

Export message in READY status before oaiimport

Hi all,
We do not use migrate for production environment but OAIIMPORT as :
- oaiimport is more reliable
- we don't want to let production people doing those manipulations with ISTUDIO
But we have a problem as we begin to have a lot of flows on production (and around 10 running adapters ) :
IF a message stay in the ready status in the OAI_HUB_QUEUE we do not want to loose this message (The oaiimport drop the whole queue)
Question : is it possible to do a normal export of the oai_hub_queue before the oaiimport so as import this queue after the oaiimport ?
Does someone as the same issue ?
regards

Hello,
The problem was i think that we used these parameters (for DB adapters) :
agent_pipeline_from_hub=false
agent_pipeline_to_hub=false
The effect of these parameters is to suppress file persistence which is "more secure" as database persistence is more reliable (cluster node)
But the main drawback is that the oaiexport/oaiimport method for upgrading production repository is no more safely usable as explained in the first message.
We will desactivate these parameters.
Thank you,
Olivier

Messages stuck in Inbound Queue with Ready Status

Hi All,
The messages in the Inbound queue are getting stuck in Ready status.
I have to manually Unlock each queue to start the processing.
After some time again all the message queue are back to the Ready State.
Please help me on this issue.
Regards
Milan

go to --> sxmb_adm
Manage Queue
Select all Queues, Activate Queues.
& check your scenarios, now it will not stuck due to this error.

Backgroung jobs remain in "Ready" status

Dear All,
Our Production is one central instance ( on Hp-ux ) and 3 application server ( one is on Hp-ux work as application server/failover server when central server down then that server act as central server ( cluster ) . and two more application server on redhat enterprise server 3).
Problem is that when my Linux application server in working or started or functioning background jobs (mostly) remain in ready status why?
In same forum I read that after restart system it will finish but it is not a solution.
Please guide me
Regards
Rayyan

check whether you have enough free bgd processes on second node?
And check those jobs are not server specific...
Regards,
Nick Loy

Delete messages stuck in status 12, Recorded for Outbound Processing

I am on a PI 7.10 SP8 system. I have 59,000 XML messages showing in status 12 ( Recorded for Outbound Processing) that I would like to just delete or cancel. These have accumulated over several days of testing interfaces. If I have to allow them to be processed, that would also work but is not needed. I have read about 6 different forum threads and tried several things but nothing has worked yet. 
The messages can not be cancelled from SXMB_MONI. 
The queues are no longer showing in SMQ2. 
I have tried restarting and re-registering the queues. 
I've tried RSXMB_RESTART_MESSAGES and RSXMB_CANCEL_MESSAGES. 
SWPR & SWPC show nothing to restart. 
Any ideas on something else to try? 

Hi,
You can try to delete or archive mesages. use following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Delete Messages SXMB_MONI
http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Too many questions on Archive/Delete messages.
Inder

Source system jobs in ready status

Hi Gurus,
I am Extracting data from R/3 to BW, when i execute the infopackage the jobs in source system are in ready status and they are not moving to active & finished status.
Is there any method to make the jobs in source system active manually.
Thanks & Regards,
chinnu.

When you execute the infocpackage you must use the inmediatly option for execution or programmed job ...in your case is assume that you use the orogrammed job....if you use this last option...you must setup your job with init time...if you do not use the start time and hour the job will never starts....this could be your problem

How to cancel processed messages with acknowledgement waiting status

Hi All,
Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
Please Suggest some possible solution.
Regards,
Kanisha Sharma
Edited by: kanisha on Jul 2, 2010 8:28 AM

Hi,
Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
Please suggest
Regards,
Kanisha Sharma

Queues, not processed automatically they are status Ready

Hi Experts ,
Queues in outbound(smq2), not processed automatically they are status Ready from long time, RFC is working fine
i tried to process maually one by one ,but they are many.
how can i execute this , need your inputs.
thanks in advance
vamsi

Check that the scheduler is running in SMQR
Read,
http://help.sap.com/saphelp_nw04s/Helpdata/EN/e4/df5f3c8dde1c67e10000000a114084/content.htm
Regards
Juan

Advanced queues are waiting in ready status and do not process

Advanced queues are waiting in ready status and do not process.
There are no Db locks.
DB 11.2.0.2.0

Hi,
With this information it is not possible to get appropriate answer in the forum.
By the way you checked alert log file.
Check the below link also:
http://www.cs.umbc.edu/portal/help/oracle8/server.815/a68005/03_adq2f.htm
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

How do I process messages with status = "Holding"

Hi,
How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
Please help.
Thanks
Sudheer

Hi,
"Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
You will not find bcoz of AE archiving settings.
Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
Regards,
Rao.Mallikarjuna

Killing a job in "Ready" Status

HI all,
Is there any way that I can delete or cancel a job which has a status "Ready"?
Thanx in advance.
Rgds
Lalit Rana

please only post your question in 1 forum.
I answered you at How to kill a job in "Ready" status.

Process message & Order status

Hi, If you do GI or GR or Confirmation thru process messages, will the order status changes to GMPosted or CNF etc? If not how to change the ststus of the order to the same?

Hello...
Doing GR, GI or confirmation through PI will obviously change the status of order as it happens through normal transaction... the only difference is that we have changed the route of doing GR, GI or confirmation... Whaever Process messages u define in case of GR, GI or confirmation have a program in process message category which updates the tables which in turn changes the status of Order..
Hope u understood it..
Neeraj

XML Messages in "Scheduled" status

Hi all,
The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restart the "Scheduled" message, there will be an entry in READY status at inbound queue and we have to unlock the queue. After that, the message will be processed successfully.
Here are my questions:
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Thanks in advance.

Donald,
Here are the answers to ur questions.
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
Some times the queues get stuck for various reasons. one msg will cause bottleneck for all other msgs behind it. there is no proper reason why this happens, however if it happens regularly then u will have to give it a thought.
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
Well, if the msgs r in the scheduled state then NO.
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Manual restart is not the best way to handle msgs bcause you might loose track/ some msgs might error out together causing issues. (that has happend to us). its tough to keep track if that is the case and if its critical from business point of view.
If it is going out of R/3 then may be you can configure jobs to push the data periodically.
Regards,
Pavan

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

Job to process messages in Ready Status in SMQ2 ECC

Similar Messages

Maybe you are looking for