PPPI Process messages and check status

Hello.
Does anyone know of any method from xMII to get and check status of process messages sent to PP-PI?
E.g. check for status (has it been sent) and for any errors?
BR
Poul.

Hi Poul,
I found a few RFCs which might do the job and will list them here so you can test them:
PROCESS_MESS_DOWNLOAD
PROCESS_MESS_EXCHANGE
PROCESS_MESS_GET_RETURN_CODE
PROCESS_MESS_UPLOAD
My search method is kind of funny.  I put PROCMESS* into the search pattern of a SAP_JCo_Interface action block to return a list of related action blocks.  But since I can't use BAPI in SAP and must rely on SE37, I can't readily see the documentation to determine relevance.  But I suspect you can take if from here.  I would be interested in knowing what you come up with for these. 
I also tried PROCMSG* and get these:
BAPI_HU_PROCESS_MSG
BAPI_HU_PROCESS_MSG_DIRECT
BAPI_LIKP_PROCESS_MSG
BAPI_LIKP_PROCESS_MSG_DIRECT
Where HU stands for Handling Unit, but I can't seem to find out what LIKP refers to. 
Hope this helps and maybe together we can get the information. 
Thanks,
Mike
Found a couple more
RSAP_GET_MSG_TEXT
RSSM_GET_MSG_TEXT
You may also be able to use RFC_READ_TABLE, but I do not know the table structures which would be of interest.
Edited by: Michael Appleby on Jul 16, 2008 3:07 PM

Similar Messages

  • Overdrive Media Console/iPhone Problem Resolved-"iTunes is not responding, bring iTunes to the front and check status.

    I could not download books from Overdrive Media Console from my iMac desktop. I realized if I turned off iTunes Match in my iphone, it fixed the problem. On your iphone...Go to "Setting", scroll down to "Music" and turn off iTunes Match. i Tunes match is a music subscription service that I had purchased a few weeks ago. I could not figure out when I tried to download audiobooks from Overdrive I got the following message "iTunes is not responding, bring iTunes to the front and check status". Problem solved. I hope this helps others who are experiencing the same problem!

    I'm assuming you are talking about audiobooks and if so, just download all the parts in overdrive media console then locate them in your finder. Go into Itunes and go File > Add new files to Library. Go select all the mp3s and upload them onto your library. Sync your iPhone with it and that is what has worked for me Hope this helps!

  • Transaction code to find Process message and Process Instruction

    Hi
    I am new to PP module
    Where do i find (In which Transaction) the list of
    a) Process Message Category
    b) Process message
    c) Process Instruction Category
    in SAP ERP system??
    Regards
    Sweety

    Hi
    Thank u all for responding
    Still I was not able to find certain Process Messages like YQ_AIR, YQ_RPM, YQ_TEMP, YQ_CONS, YQ_PHCO, YQ_PHCO2.
    and Process Instructions like
    YQ_AIR, YQ_ENDPI,YQ_HEAD, YQ_INSTR, YQ_LAY, YQ_MATLI, YQ_PROD, YQ_PTEXT,YQ_RPM, YQ_TEMP, YQ_CON1, YQ_CON2..
    do I need to do some (Basis) configuration to get these?? or the above mentioned Process Messages and Process Instructions are not pre defined??
    Regards
    Sweety

  • Segregate payment processing(f110) and check printing process

    Is it possible to segregate the automatic payment run (f110) processing into 2 step:
    1) Execute payment run to clear the open item will be processed by Department A
    2) Printing of the checks by the identification code in the payment run parameter will be processed by Department B
    The client requested for the above segregation of duties.
    Thanks.

    Hi
    This is possible like we can divided by two section.
    Accounting clerk will be execute Payment proposal and check the open items
    Superior will be execute the  paynment and execute the check.
    Please contact to Security team.I feel this also comes under SOD conflict.
    Regards

  • Process Message and PI sheet

    Dear All,
    I have created one finished product and one raw material. In Master Recipe i created one Phase and assign two instruction category CONS_1 and PROD_1.
    Now i generated PI sheet in COR2 and see CO53 that it is present and now i send it and in CO60 it is there.
    Now when i see and enter quantity in PIsheet and double click on it to see the Process Message
    1) PI_PROD has material number of finished product - It is ok
    2) PI_CONS has also material number of finished product but it should have raw material number.
    So, my issues are
    1) How raw material will be there in PI_CONS Process Message.
    2) Should i create two phase and assign it one by one or what else.
    3) If i have Process Order of 500 quantity and through PI Sheet i do GR of 10 and GI of 10 then for next time how should i do GI and GR again. Should i send PI Sheet again from CO53 to CO60.
    4) Is there only one control Recipe is generated for one process order.

    Hi,
    process instruction CONS_1 will not show raw material number it will show reservation number of the process order...instead of using CONS_1 use CONS_D and use this control recipe destination and make the settings as shown below...
    your final PI sheet output will be like this....
    Hope this helps...
    Thanks
    Kumar

  • Photosmart 2710: Error Message and check cartridge on right.

     I have the Photosmart 2710 all-in-one but I continue to get the following error message:  Remove and check cartridge on right.
    I have remove the black cartridge and check everything. I have cleaned the connectors but still I continue to get this error.

    Start by following the troubleshooting steps shown here.  If cleaning the cartridge and printer contacts does not resolve the issue then check the spring as shown in this page.  If the spring is dislodged (1) you will need to have the printer serviced.  If the spring is dislodged but has not damaged the flex circuitry (2) then some have reported success epoxying the spring back in position.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Job to process messages in Ready Status in SMQ2 ECC

    Hello friends,
    I am sending out messages from SAP ECC to PI  using proxy . The messages are getting stuck in SMQ2 in READY status. I have to each time manually go and activate the queue to send the message out of SAP ECC.
    Is there any job to process them automatically that needs to be set up in SAP ECC ?
    Thank you,
    Teresa

    Hi,
    Investigate why messages were strucked in Queues, there could be some reason, i suggest you too deregister and register queues once again.
    if possible assign sepprate queue for proxy interface.
    Regards,
    Raj

  • "Extracting...this might take a while" message and download status bar running for 15 hours.

    Having purchased Adobe Acrobat XI Pro Mac Download, and installed the program with Adobe Download Assistant, the program is loaded but the status bar has continued to run for 15 hours with a message underneath stating "Extracting...this might take a while".  Also, a warning message appeared during download stating "The following disk images couldn't be opened"; (Image) AcrobatPro_11_Web_W, (Reason) error -4960.  How do I complete this download?     

    Check for the Internet connection. If its good, then try the same with a different broswer. Below link would help in this scenario,
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

  • SNP process messages and Advanced Q

    Folks,
    I'm trying to help a project that doesn't have any DBA support and I'm coming in cold to advanced queuing. I'm getting this message in the alert log. Restarting dead background process SNPN
    SNPN started with pid=15
    Can somone direct me where to look for a cause of this message or, by chance, is this a function of the advanced queuing feature.
    Thanks !
    Darrell

    Hi,
    If you are saying you are using a tBridge (JMS bridge component of WTC) redirection to take messages from Tuxedo /Q and place them on a JMS queue, then the problem is that only a single thread will process the redirection. In other words, a single thread is started to perform tpdequeue() operations on the Tuxedo /Q queue, and then put the message on a JMS queue. If you need more throughput than a single thread offers, you will need to add another redirection in the WTC configuration.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Bluetooth PeerFinder.AlternateIdentities keys for unpaired devices and check status

    Hi,
    I am developing a Bluetooth printing application. In which I want to find and pair device in the application itself. 
     PeerFinder.AlternateIdentities["Bluetooth:PAIRED"] = "";
    To find the paired devices, but in a scenario when device is not paired then I am not able to find any new devices in peerfinder. Is there
    any way to get a list of unpaired devices along with the paired devices and pair with them if they are not paired. 
    Also, I want to check the status of Bluetooth devices-
    1. Is it currently on or off?
    2. Is it currently connected?
    - Thanks and regards
    Onkarraj

    Thanks for the reply. <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="83444b86-c250-4820-95f8-8bb17e538e25"
    id="ec2903ff-6f6c-4a76-a415-7271dc2489dd">but</gs> it is only giving me details of Network connections.
    //Retrieve the ConnectionProfile
                string connectionProfileInfo = string.Empty;
                ConnectionProfile InternetConnectionProfile = NetworkInformation.GetInternetConnectionProfile();
                //Pass the returned object to a function that accesses the connection data 
                connectionProfileInfo = GetConnectionProfileInfo(InternetConnectionProfile);
    I have tried above code and find no good. 
    -Onkarraj

  • Process crash and lock status

    Hi All
    In my case, when one environment is shared among multiple processes and suppose if one of the process crashes after acquiring a write lock on a Dbt. then all the lock requests by other processes causes the Berkeley DB to return DB_LOCK_NOTGRANTED error code.
    Following is the code snippet after which a process crashed.
    nRet = Env.lock_get( uLockID, DB_LOCK_NOWAIT , &dbKey, DB_LOCK_WRITE, &DBLock );
    I can only get out of this situation only after performing a recovery, that is using the DB_RECOVER flag in the environment open, which requires all the process to stop all the database operations in the environment.
    I would like to know is there any workaround other than performing a database recovery.
    Thanks in advance
    Nisam

    hello,
    For a write lock recovery should be run.
    thanks,
    Sandra

  • PPPI - process Messages need to resend

    Hi GURUs,
    During message sending for PI sheet, T. Code: CO54,
    Initially while sending message it gives error  for some recipes but when we resend couple of times for
    destination it gets sent without error.
    Please advice for the same.
    Regards,
    PRADEEP

    Hi All,
    The error which I faced due to which I have to resend message is given below:
    Program termination when updating message data
    When I go to help for error message it shows following
    Help: The message has been sent. However, the update of message or destination data was cancelled.
    Procedure
    Contact your system administrator.
    Please give suggestion.
    Pradeep

  • Letter of credit check status not correct in VL01N

    Hi, Gurus,
    I activate both credit management and documentary payment. When I try to create delivery-VL01N with reference to a sales order, i assign an financial document with 100% depreciation. Suppse deliver amount exceeds this financial document, system should issue message and block this delivery. However, there were no such message and credit status is "A" when saving delivery.
    In Vl02N, not changing any data, system issue the message showing that
    the financial document value is exceeded, and delivery is blocked when I save the delivery.
    I checked my configuration, and cannot think of anything related to this.
    After debug, I found out that the reason is that SAP get delivery value from table S131, field  OLIKW and compare it with financial document open value. However, S131-LOIKW is 0 when I create the delivery. After delivery is created, S131-OLIKW value is corect. Therefore, when i change delivery and try to save before exit, system will issue the message.
    Does anyone know anything might be related to this weird issue?
    Thanks,
    Cicely

    Hi Gopala,
    The accounting document has already been released &accounting doc has been created. But the value of Financial Doc i.e Letter of Credit remains same.
    Regards,
    Mahendra

  • Table for process order &Selection profile status  details -reg

    Hi ,
    From which tabel we can get the link between the process order and selection status profile (like SAP001 etc..
    When we input the process orders we should get the selection status profiel linked to it
    Regards,
    Madhu Kiran

    Hi,
    The tables JEST and JSTO  are related to status profile .
    What i need is of Selection Profile
    You can see this field in COOIS or COOISPI  just above the Sys Status field
    We need this urgently
    Can any one help ?
    Madhu Kiran

  • Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

    Hi,
    When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
    Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
    I increased the log level to 5 and got the below message in log file
    ObjMgrBusServiceLog    InvokeMethod    4    0000000251b51f04:0    2013-06-10 01:30:12    Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
    ObjMgrBusServiceLog    Error    1    0000000251b51f04:0    2013-06-10 01:30:12    (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
    I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
    Can any body help me out in this regard.
    Thanks in advance..
    Jagadeesh

    Hi Naresh,
    yes, I am using the delete polling strategy. Here is the .jca file:
    <adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
    <endpoint-activation portType="Pozadavky_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
    <property name="DescriptorName" value="Pozadavky.Pozadavky"/>
    <property name="QueryName" value="PozadavkySelect"/>
    <property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
    <property name="PollingStrategy" value="DeletePollingStrategy"/>
    <property name="PollingInterval" value="120"/>
    <property name="MaxRaiseSize" value="1"/>
    <property name="MaxTransactionSize" value="10"/>
    <property name="NumberOfThreads" value="1"/>
    <property name="ReturnSingleResultSet" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>

Maybe you are looking for