Join conditions ausp and cawnt
Hi all,
I have the following SELECT for gathering data from AUSP and CAWNT tables:
LOOP AT it_report INTO wa_report.
SELECT atwrt objek ausp~atinn atwtb FROM ausp
INNER JOIN cawnt
ON auspatinn = cawntatinn
AND auspatzhl = cawntatzhl
INTO CORRESPONDING FIELDS OF TABLE it_ausp
WHERE ( auspatinn = vl_atinn1 OR auspatinn = vl_atinn2 )
AND objek = wa_report-matnr
AND spras = sy-langu.
some other code here.
ENDLOOP.
When I go to SE11 and try to get some date with this conditions, data is here, but still this SELECT returns with sy-subrc 4.
Can anyone please take a look at this SELECT and tell me if anything is wrong, cause I can't find the solution.
Thank you in advance,
Maja
Hi,
Please try to avoid such a select statement in a LOOP.
It degrades the performance.
The WHERE clause is on fields ATINN, OBJECK and SPRAS.
ATINN has a conversion routine associated with it.
So just check if the variables vl_atinn1 and vl_atinn2 are of the same type as ATINN.
Also you are matching OBJEK with matnr.
Check if you need to pass an initial '0's to the material number.
This might be a reason for failure of the selection query in the program.
When you give the same data on SE16; SAP is taking care of all this by itself.
Regards,
Ankur Parab
Similar Messages
-
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
Infoset Join condition on Key feilds and data fields
Hi Guys,
I have a requirement to biuld the Info set with join conditon on two DSO's the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
The two info objects are
0AC_DOC_NO
0ITEM_NUM
These two info objects are defined as data fields in DSO : 0LIV_DS1 Invocie verificaion
key fields in DSO: 0FIAP_0o3 FI AP Line Item
Please suggest me is it possible to define join the condtion on the data fields and key feilds.
Thanks
Best regards
SGHi
yes you can create join, you will get any issue in reporting level.
example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
Creation of join is dependent on fields common in your source objects.
check out the below document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM -
Join condition between PO_REQUISITION_HEADERS_ALL and WF_NOTIFICATIONS
Hi,
Could anyone tell me what is the join condition between PO_REQUISITION_HEADERS_ALL and WF_NOTIFICATIONS?
I joined these two tables by WF_NOTIFICATIONS.ITEM_KEY = PO_REQUISITION_HEADERS_ALL .WF_ITEM_KEY.But I cannot found some approved requisitions item key in WF_NOTIFICATIONS table.
Please help.
I paste my query below:
SELECT PRH.ORG_ID ORG_ID,
WF.ITEM_KEY,
WF.FROM_ROLE,
PRH.WF_ITEM_KEY,
WF.RECIPIENT_ROLE APPROVERS_NAME,
TRUNC(NVL(PRH.APPROVED_DATE, '')) DATE_APPROVED,
WF.SUBJECT SUBJECT,
PRH.DESCRIPTION REQ_DESC,
PRH.SEGMENT1,
(SUM(NVL(PRL.AMOUNT, 0)) +
SUM(NVL(PRL.UNIT_PRICE, 0) * NVL(PRL.QUANTITY, 0))) REQ_AMT,
GL.SEGMENT1 || '.' || GL.SEGMENT2 || '.' || GL.SEGMENT3 || '.' ||
GL.SEGMENT4 || '.' || GL.SEGMENT5 || '.' || GL.SEGMENT6 || '.' ||
GL.SEGMENT7 || '.' || GL.SEGMENT8 CHARGE_ACCT
FROM APPS.WF_NOTIFICATIONS WF,
APPS.PO_REQUISITION_HEADERS_ALL PRH,
APPS.PO_REQUISITION_LINES_ALL PRL,
APPS.PO_REQ_DISTRIBUTIONS_ALL PRD,
APPS.GL_CODE_COMBINATIONS GL
WHERE WF.FROM_ROLE IN ('GHAWKINS', 'GHALVERSON', 'NCERNOTTA', 'DCOLLOPY', 'RHAY')
AND BEGIN_DATE > SYSDATE - 60
AND WF.MESSAGE_TYPE = 'REQAPPRV'
AND WF.ITEM_KEY = PRH.WF_ITEM_KEY --added
AND PRH.AUTHORIZATION_STATUS = 'APPROVED'
AND PRL.REQUISITION_HEADER_ID = PRH.REQUISITION_HEADER_ID
AND PRD.REQUISITION_LINE_ID = PRL.REQUISITION_LINE_ID
AND PRD.CODE_COMBINATION_ID = GL.CODE_COMBINATION_ID
GROUP BY PRH.ORG_ID,
WF.ITEM_KEY,
WF.FROM_ROLE,
PRH.WF_ITEM_KEY,
WF.BEGIN_DATE,
WF.SUBJECT,
WF.RECIPIENT_ROLE,
PRH.APPROVED_DATE,
PRH.DESCRIPTION,
PRH.SEGMENT1,
PRL.REQUISITION_HEADER_ID,
GL.SEGMENT1 || '.' || GL.SEGMENT2 || '.' || GL.SEGMENT3 || '.' ||
GL.SEGMENT4 || '.' || GL.SEGMENT5 || '.' || GL.SEGMENT6 || '.' ||
GL.SEGMENT7 || '.' || GL.SEGMENT8Pl see if these MOS Docs can help -
603232.1 - How to Diagnose Purchasing Document Approval Routing
579522.1 - Forward Document Form FAQ
431767.1 - How To View Requisition From The Email Notifications For Which Workflow Data Is Purged
HTH
Srini -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
Difference between join conditions using NVL and not using NVL
Hi,
I have a join condition in one of the applications as follows.
NVL(RQ.out_mesg_id,0) = NVL(RS.out_mesg_id,0)How is it different without using NVL function. What is the internal execution difference.
RQ.out_mesg_id = RS.out_mesg_idWill there be any difference in Performance and also in the query output.
Regards,
PaboluPabolu wrote:
Hi,
I have a join condition in one of the applications as follows.
NVL(RQ.out_mesg_id,0) = NVL(RS.out_mesg_id,0)How is it different without using NVL function. What is the internal execution difference.
RQ.out_mesg_id = RS.out_mesg_idWill there be any difference in Performance and also in the query output.
Regards,
PaboluI suppose that's a bit of a trick question (or could be).
If the column is allowed to be NULL, then your 2 queries are NOT equivalent, so comparing isn't useful since presumably you can only have one correct result :)
However, if RQ and RS (no idea what the table names are) are both defined as having a NOT NULL constraint on the column out_mesg_id (ignoring the possibility of column level masking possible with the use of VPD here) then the optimizer could do better if you rewrote the query without the use of NVL (this would of course depend on your tables, indexes, etc ... i am merely showing you that it COULD make a difference).
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t1 as
2 select level as col1, case when mod(level, 10) = 0 then null else mod(level, 10) end as col2
3 from dual connect by level <= 1000;
Table created.
SQL>
SQL> alter table t1 add constraint t1_pk primary key (col1);
Table altered.
SQL>
SQL> create index t1_i_001 on t1 (col2);
Index created.
SQL>
SQL> exec dbms_stats.gather_table_stats(user, 'T1', cascade => true);
PL/SQL procedure successfully completed.
SQL>
SQL> create table t2 as
2 select level as col1, case when mod(level, 100) = 0 then null else mod(level, 100) end as col2
3 from dual connect by level <= 1000;
Table created.
SQL>
SQL> alter table t2 add constraint t2_pk primary key (col1);
Table altered.
SQL>
SQL> create index t2_i_001 on t2 (col2);
Index created.
SQL>
SQL> exec dbms_stats.gather_table_stats(user, 'T2', cascade => true);
PL/SQL procedure successfully completed.
SQL>
SQL> --query using NVL
SQL> explain plan for
2 select count(*)
3 from t1, t2
4 where nvl(t1.col1, 0) = nvl(t2.col1, 0)
5 /
Explained.
SQL>
SQL> SELECT * FROM table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 663667122
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 8 | 5 (20)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 8 | | |
|* 2 | HASH JOIN | | 1000 | 8000 | 5 (20)| 00:00:01 |
| 3 | INDEX FAST FULL SCAN| T1_PK | 1000 | 4000 | 2 (0)| 00:00:01 |
| 4 | INDEX FAST FULL SCAN| T2_PK | 1000 | 4000 | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
2 - access(NVL("T1"."COL1",0)=NVL("T2"."COL1",0))
16 rows selected.
SQL>
SQL> --verbose version of NVL
SQL> explain plan for
2 select count(*)
3 from t1, t2
4 where t1.col1 = t2.col1
5 or ( (t1.col1 is null and t2.col1 = 0) or (t2.col1 is null and t1.col1 = 0) or (t1.col1 is null and t2.col1 is null) )
6 /
Explained.
SQL>
SQL> SELECT * FROM table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 1043818223
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 8 | 2 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 8 | | |
| 2 | NESTED LOOPS | | 1000 | 8000 | 2 (0)| 00:00:01 |
| 3 | INDEX FAST FULL SCAN| T1_PK | 1000 | 4000 | 2 (0)| 00:00:01 |
|* 4 | INDEX UNIQUE SCAN | T2_PK | 1 | 4 | 0 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
4 - access("T1"."COL1"="T2"."COL1")
16 rows selected.So if we compare the 'verbose' version of the query, in the "predicate information" section of the explain you can see that the optimizer was able to completely ignore the
or ( (t1.col1 is null and t2.col1 = 0) or (t2.col1 is null and t1.col1 = 0) or (t1.col1 is null and t2.col1 is null) ) condition since it knows that neither t1.col1 NOR t2.col1 columns can be null (by definition), and because of this we get a slightly different index access choice. -
What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail
Hi,
What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail?
Thanks & Regards,
Hari BabuPlease see the query in (Consolidate Onhand Quantity /Sum Quantity Zero in MTL_ONHAND_QUANTITIES_DETAIL (MOQD) / Concurrent Program Consolidate Inventory Onhand Quantities / Datafix for 0 Quantity Displayed For Finished Goods (Doc ID 353345.1)), is shows how to join those 2 tables.
http://etrm.oracle.com
Thanks,
Hussein -
Using records that satisfy and do not satisfy join condition
Hi,
My requirement is to use the records which satisfy and do not satisfy the join conditions in ODI.
Can any one explain how to achieve this?
Thanks in advance.
Regards,
SRKHi Katukota,
Thanks for the suggestion. When i tried to implement the same with an OUTER JOIN to capture the records that satisfied and not satisfied the join condition, the SQL statement is not getting created properly and as given below
"from DEPT [empty] EMP where (1=1) And (DEPT.DEPTNO=EMP.DEPT(+))"
THere is no ',' operator between the two tables in the FROM Clause. When it is corrected in the ODI operator, the task is executed successfully.
Can you please suggest the way forward to avoid this error?
Thanks in advance.
Regards,
SRK
Edited by: user6416145 on 04-May-2009 14:13 -
Join conditions in Multiprovider and Infoset
Hi experts,
1. I am using the multiprovider 0IC_MC01 which contains the cube 0IC_C03 and 0MATERIAL.
I want to know the join conditions between these two infoproviders in the Multiprovider. How and where to get this info?
2. Similarly, I've a Infoset(custom created) which contains 2 DSOs. I want to know the join conditions between these 2 DSOs in the Infoset.
Please give a hint on this.Hi,
pls go through the following steps and u can get the required info form the links provided...
1. Create an InfoArea to which you want to assign the new MultiProvider.
Choose Modeling ® InfoProvider.
2. In the context menu of the InfoArea, choose Create MultiProvider.
3. Enter a technical name and a description.
4. Choose Create.
5. Select the InfoProvider that you want to form the MultiProvider. Choose Continue. The MultiProvider screen appears.
6. Use drag and drop to transfer the required InfoObjects into your MultiProvider. You can also transfer entire dimensions.
7. Use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
http://help.sap.com/saphelp_nw70/helpdata/EN/cf/bc734190ba137de10000000a155106/frameset.htm
for infoset u can hav the deatils from below
http://help.sap.com/saphelp_nw70/helpdata/EN/d2/cb466d455611d189710000e8322d00/frameset.htm
regards,
rudra.
Assign points if useful -
More than one join condition for 2 tables in obiee
Hello,
I am using obiee 11g.
There are 2 tables tableA and tableB where the join condition is like (tableA.col1=tableB.col1) or (tableA.col1 is null and tableB.col1 is null)
where should i do these type of joins.
I tried putting in physcial layer->f(x) but giving error like here only columns an d opertaors are allowed.
Thanksok here it goes.
I have a tableA with columns col1(pk),col2 and other columns
I have tableB with columns col1(pk),col2..Only these 2 columns.
Now distinct tableA.col2 values are put in tableB.col2. For those distinct values i have put the tableB.col1 values.
Now tableA.col2 as well as tableB.col2 can be null beacuse there may be null values in tableA.col2.
Now in tableB i have added one more row which has col1 as value and col2 as null.
Now when in physical layer when i do tableA.col2=tableB.col2 i dont get the null values.
What i want is whenever the tableA.col2 and tableB.col2 is null then take tableB.col1 for those vales.
So when i query i do
select * from tableA,tableB where
((tableA.col2=tableB.col2) or (tableA.col2 is null and tableB.col2 is null))
What i want is when i do a join i should be able to give this OR condition in rpd thats it.
because when i do in where clause of content tab it goes like a AND condition and not OR.
Thanks
Edited by: user123 on Jul 5, 2011 1:57 PM -
Join is not working for NULL values on join condition
HI ,
I have the following problem .
SQL> select *from a;
X Y
1
2
3
4
SQL> select *from b;
B Y
1
2
SQL> select f.x,f.y,s.b from a f,b s
2 where f.x=s.b(+);
X Y B
1 1
2 2
4
3
SQL> select f.x,f.y,s.b from a f,b s
2 where f.x=s.b(+)
3 and f.y=s.y;
no rows selected
So now if i include one more join condition where in null = null situation arises , it is now working.
Simply saying its not treating ( 1 and null ) and ( 1 and null ) are same.
What is the solution.Is this a expected behaviour.
Thanks
Pramod GarreHI
I want something like this
SQL> select f.x,f.y,s.b from a f,b s
2 where f.x=s.b(+);
X Y B
1 1
2 2
4
3
SQL> select f.x,f.y,s.b from a f,b s
2 where f.x=s.b(+)
3 and f.y=s.y;
Instead of "now Rows " i have to get
X Y B
1 1
2 2
4
3
Is there is any way to do this.
Thanks
Pramod -
Dynamic SQL Joining between tables and Primary keys being configured within master tables
Team , Thanks for your help in advance !
I'm looking out to code a dynamic SQL which should refer Master tables for table names and Primary keys and then Join for insertion into target tables .
EG:
INSERT INTO HUB.dbo.lp_order
SELECT *
FROM del.dbo.lp_order t1
where not exists ( select *
from hub.dbo.lp_order tw
where t1.order_id = t2.order_id )
SET @rows = @@ROWCOUNT
PRINT 'Table: lp_order; Inserted Records: '+ Cast(@rows AS VARCHAR)
-- Please note Databse names are going to remain the same but table names and join conditions on keys
-- should vary for each table(s) being configured in master tables
Sample of Master configuration tables with table info and PK Info :
Table Info
Table_info_ID Table_Name
1 lp_order
7 lp__transition_record
Table_PK_Info
Table_PK_Info_ID Table_info_ID PK_Column_Name
2 1 order_id
8 7 transition_record_id
There can be more than one join condition for each table
Thanks you !
Rajkumar YeluguHi Rajkumar,
It is glad to hear that you figured the question out by yourself.
There's a flaw with your while loop in your sample code, just in case you hadn't noticed that, please see below.
--In this case, it goes to infinite loop
DECLARE @T TABLE(ID INT)
INSERT INTO @T VALUES(1),(3),(2)
DECLARE @ID INT
SELECT @ID = MIN(ID) FROM @T
WHILE @ID IS NOT NULL
PRINT @ID
SELECT @ID =ID FROM @T WHERE ID > @ID
So a cursor would be the appropriate option in your case, please reference below.
DECLARE @Table_Info TABLE
Table_info_ID INT,
Table_Name VARCHAR(99)
INSERT INTO @Table_Info VALUES(1,'lp_order'),(7,'lp__transition_record');
DECLARE @Table_PK_Info TABLE
Table_PK_Info_ID INT,
Table_info_ID INT,
PK_Column_Name VARCHAR(99)
INSERT INTO @Table_PK_Info VALUES(2,1,'order_id'),(8,7,'transition_record_id'),(3,1,'order_id2')
DECLARE @SQL NVarchar(MAX),
@ID INT,
@Table_Name VARCHAR(20),
@whereCondition VARCHAR(99)
DECLARE cur_Tabel_Info CURSOR
FOR SELECT Table_info_ID,Table_Name FROM @Table_Info
OPEN cur_Tabel_Info
FETCH NEXT FROM cur_Tabel_Info
INTO @ID, @Table_Name
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @whereCondition =ISNULL(@whereCondition+' AND ','') +'t1.'+PK_Column_Name+'='+'t2.'+PK_Column_Name FROM @Table_PK_Info WHERE Table_info_ID=@ID
SET @SQL = 'INSERT INTO hub.dbo.'+@Table_Name+'
SELECT * FROM del.dbo.'+@Table_Name+' AS T1
WHERE NOT EXISTS (
SELECT *
FROM hub.dbo.'+@Table_Name+' AS T2
WHERE '+@whereCondition+')'
SELECT @SQL
--EXEC(@SQL)
SET @whereCondition = NULL
FETCH NEXT FROM cur_Tabel_Info
INTO @ID, @Table_Name
END
Supposing you had noticed and fixed the flaw, your answer sharing is always welcome.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
How to use outer join condition in my below query.
Hi All,
How to use outer join condition in my below query.
In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more records
in the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records.
I want all the records from APPS_JP.GEDIS_OFFER_HEADER goh
including other conditions.
I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result.
[code]SELECT GOH.ORIG_SYSTEM,
gsp.USER_NAME,
goh.ORDER_NO,
goh.OMEGA_ORDER_NUMBER,
goh.ORDER_TYPE,
gc.CUSTOMER_ID,
gc.OMEGA_CUSTOMER_NUMBER,
CASE WHEN gc.PRIVATE = 'N' THEN gc.CUSTOMER_NAME ELSE '' END
AS COMPANY_NAME,
goh.ORDER_STATUS,
goh.TOTAL_SELLING_PRICE,
goh.TOTAL_MARGIN,
ga1.ADDRESS1
|| ','
|| ga1.ADDRESS2
|| ','
|| ga1.ADDRESS3
|| ','
|| ga1.POSTAL_CODE
|| ','
|| ga1.CITY
AS SHIPPING_ADDRESS,
ga2.ADDRESS1
|| ','
|| ga2.ADDRESS2
|| ','
|| ga2.ADDRESS3
|| ','
|| ga2.POSTAL_CODE
|| ','
|| ga2.CITY
AS BILLING_ADDRESS,
ga.ADDRESS_ID,
gol.DESCRIPTION,
APPS_JP.TZ.to_local_date (goh.OFFER_DATE, goh.OFFER_DATE_UTC)
AS OFFER_DATE,
gc.LEVEL_8,
goh.NO_OF_BUILDS,
gob.SFDC_ID,
goh.PURCHASE_ORDER_NO AS PO,
gc1.CUSTOMER_NAME AS END_USAGE,
gol.LOB,
goh.TOTAL_MARGIN_PCT,
goh.TOTAL_DISCOUNT,
goh.TOTAL_DISCOUNT_PCT
FROM APPS_JP.GEDIS_OFFER_HEADER goh,
APPS_JP.GEDIS_ORDER_BUILDS gob,
APPS_JP.GEDIS_ORDER_LINES gol,
APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER gorc,
APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER ship,
APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER bill,
APPS_JP.GEDIS_CUSTOMER gc,
APPS_JP.GEDIS_CUSTOMER gc1,
APPS_JP.GEDIS_CONTACT gct,
APPS_JP.GEDIS_ADDRESS ga,
APPS_JP.GEDIS_ADDRESS_NORM ga1,
APPS_JP.GEDIS_ADDRESS_NORM ga2,
(SELECT DISTINCT SALESPERSON_ID, USER_NAME
FROM APPS_JP.GEDIS_SALESPERSON
WHERE SALESPERSON_ID IN
(SELECT TO_NUMBER (COLUMN_VALUE) AS SALESPERSON_ID
FROM TABLE (APPS_GLOBAL.SplitString ('337309'))))
gsp
WHERE goh.ORDER_NO <> 0
AND goh.OFFER_NO <> 0
AND goh.OFFER_NO=gol.OFFER_NO
AND gol.BUILD_NO = 1
AND gol.LINE_NO = 1
AND goh.OFFER_NO=gob.OFFER_NO
AND gob.BUILD_NO = 1
AND goh.OFFER_NO = gorc.OFFER_NO
AND gct.CONTACT_ID = gorc.CONTACT_ID
AND ga.CUSTOMER_ID = gc.CUSTOMER_ID
AND ga.PRIMARY = 'Y'
AND goh.LEAD_SALESPERSON=gsp.SALESPERSON_ID
AND goh.OFFER_NO = ship.OFFER_NO
AND ship.RELATION_TYPE = 'SHIP'
AND ga1.ADDRESS_ID = ship.ADDRESS_ID
AND ga1.CUSTOMER_ID = gc1.CUSTOMER_ID
AND goh.OFFER_NO = bill.OFFER_NO
AND bill.RELATION_TYPE = 'BILL'
AND ga2.ADDRESS_ID = bill.ADDRESS_ID
AND goh.OFFER_DATE BETWEEN APPS_JP.TZ.LOCAL_TO_DB_DATE (
SYSDATE - 30
AND APPS_JP.TZ.LOCAL_TO_DB_DATE (SYSDATE)
AND gorc.RELATION_TYPE = 'BASE'
AND gorc.CUSTOMER_ID = gc.CUSTOMER_ID
AND goh.SALES_CHANNEL = gc.SALES_CHANNEL
AND gc.SALES_CHANNEL = 'SMB'
AND goh.LEAD_SALESPERSON IN (goh.CREATED_BY, goh.LEAD_SALESPERSON)
ORDER BY goh.OFFER_NO;[/code]
Please help me how to use this outer join condition.
Thanks in advance.Hi,
If you want all the rows from goh, then you don't want any conditions like goh.OFFER_NO <> 0.
Make all the joins to goh outer joins, and make all conditions that apply to any tables joined to goh (or to tables joined to them) part of the join condition, like this:
FROM APPS_JP.GEDIS_OFFER_HEADER goh
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_BUILDS gob ON gob.OFFER_NO = goh.OFFER_NO
AND gob.BUILD_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_LINES gol ON gol.OFFER_NO = goh.OFFER_NO
AND gol.BUILD_NO = 1
AND gol.LINE_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER
gorc ...
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, do you really need all those tables to show what the problem is? Of course, you need them in tyour real query, but if you understand a solution that only involves 4 or 5 tables, you'll know how to apply it to any number of tables.
Explain, using specific examples, how you get those results from that data.Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ https://forums.oracle.com/message/9362002#9362002 -
Urgent - How to join multiple facts and dimensions in OBIEE rpd??
Hi,
In my RPD I have 3 facts and 4 dimensions and the joins defined are as below
Physical layer - All joins are FK and inner (1:N)
FACTA-------------- DIM_TIME, DIM_CUST,DIM_CAL
FACTB-------------- DIM_TIME, DIM_CUST,DIM_CAL
FACTC-------------- DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ
BM layer - All joins are complex, inner
The logical table F1 pulls columns from FACTA, FACTB and FACTC . Complex join exists between all 4 dimensions DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ to logical table F1.
Issue: I need to build a report with $ column from FACTA, FACTB and FACTC and need to add filter conditions using columns from DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ.
However when ever I add a filter condition from DIM_XYZ the physical query generated is not generating code to access data from FACTA and FACTB. Instead it is subsituting a NULL and just pulls data frm FACTC.
My Questions: What is the best way to build the physical and BMM layer using FACTA, FACTB,FACTC, DIM_TIME, DIM_CUST,DIM_CAL and DIM_XYZ??
I need to resolve this issue ASAP so any help is appreciated. Thanks
Edited by: user11935561 on Feb 10, 2010 6:27 AM
Edited by: user11935561 on Feb 10, 2010 6:28 AMYou can find the same issue in
Logic of queries in OBIEE
or
Connection between 2 fact tables
Follow the link
http://there-n-back-again.blogspot.com/2009/04/oracle-analytics-how-to-report-over-non.html
Put 'All' or 'Total' at levels for dim_xxx for those facts you need in your report from facta and factb
Regards
Nicolae -
In-different behaviour of join condition
My query is of in-different behaviour of join condition with join between a varchar2 column and a number column. I am using the following join condition :-
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
where CM.UPDATED_BY is a varchar2 column and LM.LOGIN_ID is a number column. Now, CM.UPDATED_BY also has number only but some previous & old data is having varchar2 data. So, for that reason, i put the to_char before LM.LOGIN_ID, otherwise, only
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
would having been okay. Now, my real question is that the query with the condition,
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
works fine as long as there is no 'character' data in 'CM.UPDATED_BY'. If i put the condition:
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
then, the query is taking too long and the output is also not coming. Please help in solving my doubt as i need it resolved urgently.1) Did you intend for all 4 join conditions to be identical? From the text of your question, it sounds like some of the conditions should be different.
2) How do you compare the running time when CM.UPDATED_BY has non-numerica data and when it has numeric data? If you are altering the data in the table, are you reanalyzing the table between runs? Is there a difference in the query plan in the two cases?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC
Maybe you are looking for
-
Disk Utility - Can't repair Disk - Help needed :(
Hi, I have some trouble to use Disk Utility (on my iBook G4 - 1.33 Ghz+1 GB RAM) I run Disk Utility to verify and repair permissions, which worked, and then Verify Disk. HEre is the logged result: ++++++++++++++++++++++++++++++++++++++++++++++++++++
-
Dear All, I have an issue regarding Return order -- PGR--Return Invoice. The problem is that after creation of sales order, it is allowing me to create Delivery Order but not allowing me to do PGR. what could be the possible reason? It c
-
Making Primary Key on Null Column !
I am not happy the way Oracle treat adding constraint on existing table. I have one column initially accept NULL Values. after I import the data into this table. this column does not have any NULL value. I want to make this column as Primary Key. How
-
Javax.naming.NameNotFoundException: jms/QueueConnectionFactory not found
Hi, I wrote a Java JMS client that connect to Oracle9iAs 9.0.2.1 using OC4J 9.0.3. I got the error javax.naming.NameNotFoundException: jms/QueueConnectionFactory not found? first I'm a bit confused about which rmi port to use to connect to Oracle9ias
-
Can't delete and Ibook with iCloud icon
Hi, Delete is not available as an option for an Ibook in the Cloud, where/how do I delete it? I tried downloading it and deleting it. It's showing on my Mac and my Ipad, but not available to delete in either location, as it is apparently "in the cl