Join conditions for the given tables

Hi,
I would like to join the below tables
FA_INVOICE_DETAILS_V FID
,AP_INVOICE_PAYMENT_HISTORY_V AIP
,PO_DISTRIBUTIONS_all PD
,AP_BATCHES_ALL AB
,PO_HEADERS_ALL POH
,PO_LINES_ALL POL
,FA_ADDITIONS_V FAA
can anyone give me the conditions to join the above tables. Its an urgent please suggest me
Thanks in advance

Only you can know how to join those tables. We don't know your business, your data, or your requirements.
If you would like us to help you, you need to provide the definitions of all the tables and which columns match between these tables. Then you have to tell us if you want inner joins, outer joins, theta joins, etc.
Please see the following link:
Urgency in online postings

Similar Messages

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

Reg: Join Conditions for Tables to create a View for Generic Extraction

Hi Experts,
Am trying to extract the data from Solman, for this purpose am creating a Generic Extractor based on three tables. So, can anyone please help me out by providing the join conditions to create a view based upon the following three tables,
1. CRM_ORDERM_H
2. DNOD_NOTIF
3. DNOD_NOTIF_S
Anyways i require the following fields in the extractor finally:
CRM CHANGED AT
GUID
SAP COMPONENT
RELEASE
REPORTED BY
These are the some of the major fields that i require in the final extractior. Please help me out ASAP with the table join conditions..
Will Assign Points for the helpfull answer...
Thanks,
Gattu.

Hi,
I don't know the table CRM_ORDERM_H however you can link DNOD_NOTIF and DNOD_NOTIF_S
DNOD_NOTIF_S-CLIENT = DNOD_NOTIF-CLIENT
DNOD_NOTIF_S-GUIDS = DNOD_NOTIF-GUIDS
For the third table could you please paste here its definition like the hereunder?
Transp. table      DNOD_NOTIF       Active
Short Text         Notification Header
   Field           KeyInitData element    Data TyLengthDecimaShort Text
   CLIENT        X    X   MANDT           CLNT        3     0Client
   GUIDH         X    X   DNOT_GUIDH      RAW        16     0GUID Notification
   .INCLUDE               DNOS_NOTIF_INT STRU        0     0Notifications (Header, Internal Fields)
   OBJNR                  DNOT_OBJNR      CHAR       22     0Status Management Object Number
   STATUS                 DNOT_STATUS     CHAR        1     0Notification Status
   DELETED                DNOT_DELE_N     CHAR        1     0Deletion Indicator Notification
   PROCESSOR              DNOT_PROC       CHAR       12     0Current Processor
   TYPE_PROC              DNOT_TYPE_PRC   CHAR        2     0Type of Processor
   REPORTER               DNOT_REPORTER   CHAR       12     0Reported By
   TYPE_REPO              DNOT_TYPE_REP   CHAR        2     0Type of Notification Creator
   CREA_TSTMP             DNOT_CREA_TSTMP DEC        15     0Entry Time Stamp
   CHNG_TSTMP             DNOT_CHNG_TSTMP DEC        15     0Time of Last Change
   START_TSTMP            DNOT_START_TSTMPDEC        15     0Initial Response Time - Time Stamp
   END_TSTMP              DNOT_END_TSTMP DEC        15     0Requested End of Processing - Time Stamp
   CLO_TSTMP              DNOT_CLO_TSTMP DEC        15     0Completion Time Stamp
   .INCLUDE               DNOS_NOTIF_EXT STRU        0     0Notifications (Header, External Fields)
   NUMB                   DNOT_NUM        CHAR       12     0Notification Number (External)
   REFNUM                 DNOT_REFNUM     CHAR       20     0External Reference Number
   TYPE_NOTIF             DNOT_TYPE_N     CHAR        6     0Message category
   CATEGORY               DNOT_CATEGORY   CHAR       12     0Topic, Area
   SUBJECT                DNOT_SUBJECT    CHAR       60     0Re:
   PRIORITY               DNOT_PRIORITY   CHAR        1     0Notification priority
   LANGUAGE               DNOT_LANG_N     LANG        1     0Notification Language
hope this helps...
Olivier.

Table name for shipping details for the given purchase order

Hi,
Table name for shipping details for the given purchase order
regards,
vijay

Had anybody seen that this question was raised 5 years ago?
And the question was about where are the shipping details of a purchase order stored.
The discussion owner hat marked the the discussion a year ago as solved, but did not mark any correct answer and did not tell himself what the solution was.
The correct answer was given by Amitkumar yesterday, it is EKPV
I am locking the discussion to avoid that even more wrong answers are added to this particualr question

Mismatch in the datatypes in join conditions of the views

Hi guys,
For creating a view I am trying to join 2 tables( EUIINSTLN & EUFASS).
I have selected 4 fields in first table(EUIINSTLN) and 3 fields in the second table(EUFASS).
The join condition is in such a way that the first table field(EUIINSTLN-ANLAGE) is input to second table primary field(EUFASS-OBJKEY).
The first table field(EUIINSTLN-ANLAGE) is of 10 char length and the input field(EUFASS-OBJKEY) in the second table primary field(EUFASS-OBJKEY) is 70 characters in length.
When we take the value in the first table field(EUIINSTLN-ANLAGE) individually and give input( to EUFASS-OBJKEY) in the second table((EUFASS) it works fine even though there is mismatch in the datatypes. I.e., it works individually.
But when this data is viewed using the DDIC view it doens't show any records, since the field length condition is not met. i.e., mismatch in the datatypes takes place. The below is the condition I have given in the view - table/join condition.
EUIINSTLN     MANDT     =     EUFASS     MANDT
EUIINSTLN     ANLAGE     =     EUFASS     OBJKEY.
Some persons have said that I can delimit the 70 char field(EUFASS-OBJKEY) to 10 char.
How can I delimit the length of 70 characters field(EUFASS-OBJKEY) to 10 char in the join conditions of the view.
Appreciate if any one give any solution on this.
Regards
Mac

> EUIINSTLN     MANDT     =     EUFASS     MANDT
> EUIINSTLN     ANLAGE     =     EUFASS     OBJKEY.
Hi Mac,
You can limit the number of char in OBJKEY to 10.
Join Condition
EUIINSTLN-MANDT     =     EUFASS-MANDT
EUIINSTLN-ANLAGE      =     EUFASS-OBJKEY(10).
Best regards,
Shahid Malayil

How to find out the description for the given field?

Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...

Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri...

WHT - No unpaid tax lines exist for the given selection criteria

Before going to execute Create remittance challan J!INCHLN ,
i entered all the mentioned parameters and try to save but i got error message as follows
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updating. Check the entries.
Procedure
Check entries in table WITH_ITEM for the open tax items chosen for clearing.

Hi,
Please check for
1. Section code/ Business place updated even in the tax lines of the document and not just the vendor line item.
2. Check if there is a buzei mismatch between with_item table entries and bseg entries for the documents that are being pulled during the challan creation. If there is a Buzei mismatch, then please run the program in the note :885213 and then rerun the challan .
3. Please check the note :1465529 . This is the consulting note for j1inchln.
Hope this helps.
Thank You.
Regards,
Anushya

No unpaid tax lines exist for the given selection criteria while+J1inchln

Hi All,
While doing J1inchln I am getting following error.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.I have already updated Business Place and Section code while doing FB60.But still I am getting the same error.
I have already updated Business Place and Section code in the entry while doing FB60 but error is coming. Please advise.
Regards,
Abhinav Sharma

Hi ,
Kindly go through the note no. 1465529 , which is a consulting note on J1INCHLN .
It would resolve your query .
Regards ,
Dewang T

No unpaid tax lines exist for the given selection criteria.

Hi
at the time of remittance challan,getting following error:
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.

Hi,
It may cleared Manual posting at the time of posting. If manual clear postings reverse and do through J1INCHLN only.
and check the Date range for selection criteria.
Regards,
Kishore

Freight cost condition for the whole purchase order (Header relation)

Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
I try to have one freight condition for the whole purchase order.
For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
Any comments and help are very welcome.
Many thanks in advance
Sabrina

Hi,
Fright and discount conditions are called supplement conditon type and they are always matained with main condition type.
Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
Regards,
shailesh Mackwan

In Bdc I have huge volume of data to upload for the given transaction

Hi gurus,
In Bdc I have huge volume of data to upload for the given transaction, here am using session method, it takes lots of exection time to complete the whole transaction, Is there any other method to process the huge volume with minimum time,
reward awaiting
with regards
Thambe

Selection of BDC Method depends on the type of the requirement you have. But you can decide which one will suite requirement basing the difference between the two methods. The following are the differences between Session & Call Transaction.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is
not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program.
Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling. It can also be used for real-time interfaces and custom error handling & logging features. Whereas in
Batch Input Sessions, the ABAP program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are not available for all application areas.
synchronous & Asynchronous updating:
http://www.icesoft.com/developer_guides/icefaces/htmlguide/devguide/keyConcepts4.html
synchronous & Asynchronous processings
Asynchronous refers to processes that do not depend on each other's outcome, and can therefore occur on different threads simultaneously. The opposite is synchronous. Synchronous processes wait for one to complete before the next begins. For those Group Policy settings for which both types of processes are available as options, you choose between the faster asynchronous or the safer, more predictable synchronous processing.
By default, the processing of Group Policy is synchronous. Computer policy is completed before the CTRLALTDEL dialog box is presented, and user policy is completed before the shell is active and available for the user to interact with it.
Note
You can change this default behavior by using a policy setting for each so that processing is asynchronous. This is not recommended unless there are compelling performance reasons. To provide the most reliable operation, leave the processing as synchronous.

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

Stock at Vendor Materialwise for the given postingdate

Hi,
I got a requirement to develop a report which lists the Stock at Vendor materialwise for the given postingdate.
How to calculate the opening & closing stock for the given date for a vendor materialwise?
Regards,
VK.

Hello
MSLB - Special Stocks with Vendor
And for stock on specific date you need calculate with tables MKPF and MSEG.

How to findout DS for a given table name!

Dear Members,
I am trying to find the datasource for the given customized table!....and it's not easy to find!!!
I kindly request you to share some inputs if any possibilites to find.
Many thanks in advance.
Best Regards,
KS

Hi Raj,
As you said it's a customized table it will be difficult to find the standard data source, better to create a generic data source.
Can you post ur requirement and what is the customized table n the fields in the table.
If its not a new development system you can make use of the table RSOSFIELDMAP-Mapping Between OLTP Source Fields and InfoObjects to get the data source names where that particular field is being used.
or else if its not used in any of the data source in your system then you can search in SDN or google to find out the data source.
If there is not data source related to your respective table then u can go for creation of Generic data source.
ROOSOURCE Header Table for SAP BW DataSources (SAP Source System/BW System)
Regards
KP
Edited by: prashanthk on Apr 1, 2011 12:30 PM

Knowing the primary key columns of the given table

Hi,
How can I get the primary key columns of the given table?
Regards,
Sachin R.K.

You can find the constraint_name from all_constraints/user_constraints for constraint_type = 'P' (which is the primary key constraint).
And then see which columns are in for the constriant_name
in all_cons_columns/user_cons_columns view.
Below is the example
select acc.column_name from
all_cons_columns acc, all_constraints ac
where acc.constraint_name = ac.constraint_name
and acc.table_name = 'DEPT' AND acc.owner = 'SCOTT'
and ac.constraint_type = 'P'
Hope this helps
Srinivasa Medam

Join conditions for the given tables

Similar Messages

Maybe you are looking for