Joining Multiple Line Segments
Is there a way to join any number of line segments into one continuous line?
The end points overlap, but selecting all and going to Object>Path>Join seems to have no effect.
Making a compound path helps, but doesn't allow me to smooth the final path.
Joins multiple paths at nearest endpoints while respecting existing outboard handles:
Joins multiple paths at nearest endpoints while retracting existing outboard handles:
The scripts are described on and downloadable from
this page.
JET
Similar Messages
-
How to join multiple line segments to make a fillable polygon
Howdy,
I have illustrator CS2 12.0.1. Is there any easy way to create an irregular shaped fillable polygon? The way I currently do this is (1) I use the line segment tool to draw the sides of the polygon, (2) then for each corner of the polygon, I use the direction selection tool to select the corner, then do command-J to "join" the two segments that touch that corner. Only after doing that, I am finally able to use the eyedropper tool to fill the polygon.
This take a lot of tedious effort. I have LOTS of polygons to draw. Once I have drawn the segments, it seems like I should just be able to select all the segments and have an option that does all the joins at once.
Or, maybe instead of the line segment tool I could use some path tool. But whenever I have tried that, I end up with curved segments instead of straight ones.
Can anyone tell me how to do this?
Thanks for any help,
Frank BBasically I am drawing on top of a bitmapped background which is a satellite map. My polygons are essentially the property lots on this map. So I visually see where the corners are, and I want to make a polygon that I can fill. I actually will fill with a few different translucent colors to indicate different types of lots. This all works fine except that my current means of drawing the polygons is tedious, and it seems like there should be a better way.
Another way I could solve my problem is if I were able to reshape an existing polygon by dragging its corners to where I wanted them to be. I have not figured out how to do that. Either the entire polygon moves when I drag a corner, or the polygon gets reshaped by the drag in a way I don't want (what I want is to move one corner, and what I get instead seems like one corner stays put and the other three move around to keep constant skewishness; or something).
Frank -
The line looks like it's connected, but it's not. When I apply the brush effect it becomes disjointed. I want it to be one smooth stroke. Is there any way to join the line segments without having to redraw the stroke? I ask this because the line was imported into Illustrator from Flash, there are many more and I don't want to have to redraw them all. Thanks in advance for any help.
Bob,
Hopefully, you can:
1. Deselect the path and then drag across each set of Anchor Points where the brushes go thin;
2. Object>Path>Join.
If you select the lot before 1+2, and look in the Layers palette, or open Window>Document Info, and select Objects in the flyout menu, you should be able to see that there are multiple paths; the latter shows the number of points in each selected object.
If 1 + 2 do (or should it be does) not work, there are probably multiple Anchor Points at the end(s) of either/both of the paths to be joined; the surplus should be deleted.
Or the paths may be grouped, and should be ungrouped first; that may also be seen in the Layers palette/Document info. -
I am drawing a simple diamond shape made with one rectanlge shape and multiple line segments. As I drew the design, I made sure to connect all the segments at the anchors. When I select all of the segments and try to join the paths, the end points or corners are not smooth. In other words, some of the line segment ends hang over the edges... What am I doing wrong? Thanks!
The image below shows the left side of the diamond, where the top portion meets the bottom...Thank you, DayForce. Changing the corner type to "round join" did the trick! May I ask another question? When I select all the segments and join the paths, I get an additional line segment from one point to another. How can I elminiate this?
-
Combining Line Segments into a single shape
I drew one half of a shape by drawing multiple line segments using the arc tool. Think of the shape as sort of a C. Once I had the shape the way I wanted it, I copied and reflected it to give me the other half, so now it looks sort of like an O. However, when I go to fill the shape, I get all sort of weird fills, like it is trying to close each of the individual arcs that I drew.
I have spent over an hour going through Illustrators help and searching the internet, but I can't figure out how to join all these line segments into a single shape that I can then apply a fill to. I'm sure this is easy, but I'm frustrated.
Thanks,
KenThanks Kurt. That did it. My gosh, I would never have thought of looking for something like that. I upgrade to CS3 sometime ago, but hadn't used illustrator much since I upgraded.
Thanks for the help.
Ken -
IDOC segment with multiple lines
Hi,
I have a requirement where I need to populate the multiple lines in one segment without getting created multiple segment.
I am generating material with multiple line data in the additional data using MATMAS05 IDOC for segment E1MTXHM but its generating multiple sub segments. I need to have multiple lines in one segment and not multiple segment.
Please let me know how to achieve multiple lines in one segment.
Thanks & Regards,
RayanHi Subas,
I haven written any code as I am triggering IDOC through BD10. This is a testing requirement and we need any IDOC irresepective of MATMAS, DEBMAS, CREMAS etc etc which can have multiple lines in a single segemnt.
Sample IDOC:
Z2XXXXD000 00002300002203CTDI-PA
90210 Testing Address
CA
Beverly Hills
United States
Z2XXXD000 00002400002203ON TESTING
303 308 5319
Z2XXXXC000 00002500000102Z004E
Actually every IDOC I am generating is getting multiple segment and each segment holding one line and my requirement is that all the lines should be get accomadated in a single segment like the above sample IDOC.
Actually each segment has segment name and IDOC no. followed by field values but my requirement is within one segment name and IDOC no. all the field values get accomadated. Hope you got the understanding of what my requirement is? Please guide me how to trigger multiple line in a segment.
Thanks & Regards,
Rayan -
Hi, I am creating a graphic using line segments which need to be at right angles to each other. When I draw these two line segments how can I make sure that there is no excess bit protruding over the other side but that it is long enough so that there isn't a small gap between them?
I am using Illustrator CS2.
Thanks,
JoshYou should be able to use the align tools. I think CS2 does not have them in the tool bar, but are availble in the windows menu. Select both lines then select again on the line that is correct, then click on the align left or right to get your 90 degree angle.
Hope this helps -
Copying the item text in case of multiple line items
Hi All,
I have a scenario where the sales order gets created in our SAP through a 850 idoc. The incoming idoc has only one item segment which carries the total order quantity ( for example say 1000). Since my company has contractual agreements with the end customer for doing multiple shipments , our sales department splits the total quantity into multiple line items in the sales order. Say splitting the 1000 quantities into 5 line items of 200 each.
The problem here is that when the sales order got created , all the related item text were copied only to the first line item ( of 1000 qty) and which is standard SAP. Since the order quantity was manually split, the related item text are not carried to the subsequent line items. The issue comes when an outbound (810) idoc is sent to customer . As I told earlier since only the first line item has the item text , the 810 idoc which was created for the first line item only has the item text . The rest of the 810 which were subsequently created for multiple shipments/invoices on different dates didn't have the item text in the 810's. This is becoming a major problem as the 810 files are failing at our trading partners end because of missing text.
Now my question is, Is there a way that I can make the item text copy automatically when multiple line items are created manually by business. Like is there a way where I can modify MV45AFZZ to copy the item text in their respective segemnts ( z003,z004 etc) to "N" number of line items.
Also please suggest if there is a better way of doing it. Suggstions are most welcome !!!.
Regards
AmrithHi,
First of all try to avoid doing select into corresponding fields. THis would improve the performance of the program.
Try to do a single fetch from the BSIS table . fetch the hkont, belnr, dmbtr fields in to a master internal table. Manipulate and play with the data as required. Don't hit the data base table more than once (unless it is required) . This would improve the performance of your code.
Try to code this way.
types: begin of ty_bsis,
hkont type hkont,
belnr type belnr_d,
dmbtr type dmbtr,
end of ty_bsis.
data: it_bsis type standard table of ty_bsis,
wa_bsis type ty_bsis,
select hkont belnr dmbtr
from bsis
into table it_bsis
WHERE HKONT IN S_RACCT
AND PRCTR IN P_PRCTR
AND MONAT IN S_POPER
AND BUKRS EQ P_BUKRS
AND GJAHR EQ P_GJAHR
AND PRCTR IN S_PRCTR.
Using the data availabe in the it_bsis, you can manipulate as required.
Hope this would be helpful
Regards
Ramesh Sundaram -
Hi all,
I wana pass multiple line items thru bdc me21n....can any1 please help me .if u guys have some code can mail me at [email protected] will be rewarded.
my code below is not working for passing multiple items.
report y1_po_test
no standard page heading line-size 255.
tables: mara,
lfa1,
eina,
eine,
eban,
zdrgsah, zdrgsap,
zdrgsup,
t100,
ekko,
a004, zprice_grpsal, mvke.
*Internal Table to get the input Data
data: begin of i_input occurs 0,
matnr like ekpo-matnr,
asqty like ekpo-menge,
ebeln like ekpo-ebeln,
posnr(5),
posnr like zdrgsap-posnr,
invno like zdrgsap-invno,
invdt like zdrgsah-invdt,
netpr like zdrgsap-netpr,
cntno like zdrgsap-cntno,
shcnm like zdrgsah-shcnm,
apcno like zdrgsap-apcno,
spcno like zdrgsap-spcno,
werks like ekpo-werks,
lgort like ekpo-lgort,
matkl like ekpo-matkl,
pack(10),
mvgr2 like mvke-mvgr2,
dpric type p decimals 6 ,
gpric type p decimals 6,
end of i_input.
data: begin of i_inputxt occurs 0,
matnr(18) ,
asqty(13) ,
ebeln(10) ,
posnr(6) ,
invno(10) ,
invdt(8) ,
netpr(11) ,
cntno(11) ,
shcnm(10) ,
werks(4) ,
lgort(4) ,
matkl(9) ,
pack(10),
end of i_inputxt.
data: begin of i_error occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
inmat like mara-matnr,
prmat like mara-matnr,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
remark(255) type c,
end of i_error.
data : begin of i_error1 occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
end of i_error1.
data : begin of i_zsap occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
menge like zdrgsap-menge,
asqty like zdrgsap-asqty,
end of i_zsap.
data : v_ebeln like eket-ebeln.
data : begin of i_a004 occurs 0,
matnr like a004-matnr,
knumh like a004-knumh,
kbetr like konp-kbetr,
end of i_a004,
i_a0041 like i_a004 occurs 0 with header line.
data : begin of i_konp occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp.
data : begin of i_konp1 occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp1.
data : begin of i_netpr occurs 0,
ebeln like eket-ebeln,
ebelp like eket-ebelp,
matnr like ekpo-matnr,
menge like ekpo-menge,
netpr like ekpo-netpr,
kbetr like konp-kbetr,
end of i_netpr.
data : begin of i_grpsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_grpsal.
data : begin of i_domsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_domsal.
data : begin of i_zsap1 occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
asqty like zdrgsap-asqty,
end of i_zsap1.
data: begin of bdcdata occurs 0.
include structure bdcdata. " Batch input: New table field
data: end of bdcdata.
messages of call transaction
data: messtab like bdcmsgcoll occurs 0 with header line.
data: i_mara type mara occurs 0 with header line,
i_eina like eina occurs 0 with header line,
i_eine like eine occurs 0 with header line.
data : begin of i_inferr occurs 0,
matnr like eina-matnr,
infnr like eina-infnr,
werks like eine-werks,
end of i_inferr.
data : begin of i_inferrc occurs 0,
matnr like eina-matnr,
end of i_inferrc.
*Data declaration.
data: v_file type string, " Variable for uploading file
v_item(5) type c, " Line item number
v_itno(2) type n,
p_wkurs like zdrgkurs-wkurs,
v_matnr(20) type c,
v_menge(20) type c,
v_banfn(20) type c,
v_bnfpo(20) type c,
v_bednr(20) type c,
v_werks(20),
p_lifnr(10) ,
v_flag,
p_lifnrtxt(10),
p_wkurstxt(9),
p_bsartxt(4),
v_posnr(5), n type i,
v_quant(13),
v_asqty(13),
v_prqty(13),
v_apcno(6),
v_spcno(4),
v_itm(11),
v_cnt type i,
v_cntno(4),
v_pack(10),
v_order(15),
v_lifnr(10),
v_invdt like sy-datum,
v_waers like ekko-waers,
v_podat like ekko-bedat,
v_docdt1 like sy-datum,
v_docdt(10),
v_fnam(132).
data : begin of i_test occurs 0,
bnfpo like eban-bnfpo,
matnr like eban-matnr,
menge like eban-menge,
bsmng like eban-bsmng,
end of i_test.
data : begin of i_mvke occurs 0,
matnr like mvke-matnr,
mvgr2 like mvke-mvgr2,
end of i_mvke.
data : begin of i_invno,
ebeln like ekko-ebeln,
angnr like ekko-angnr,
end of i_invno.
data : i_final like zinvdiff occurs 0 with header line.
Constants
constants : c_pd01 like eine-werks value 'PD01'.
*Selection Screen Declarations
selection-screen begin of block b1 with frame title text-010.
parameters: p_invno like zdrgsah-invno obligatory,
p_bsart like ekko-bsart obligatory.
selection-screen end of block b1.
start-of-selection.
To Upload the data into Internal table.
perform f_upload_data.
To Validate the input data.
perform f_check_data.
if i_error[] is not initial or i_error1[] is not initial.
To display the error message
perform f_display_errors.
else.
To create PO
perform f_process_session.
endif.
perform f_check_calc_price.
perform f_display_data.
perform f_update_zinvdiff.
*& Form f_get_filename
text
form f_get_filename.
endform. " F_get_filename
*& Form f_upload_data
form f_upload_data .
select matwa as matnr asqty ebeln posnr b~invno invdt netpr cntno
shcnm apcno spcno into table i_input
from zdrgsah as a join zdrgsap as b on
a~invno = b~invno
where b~invno eq p_invno.
select ebeln
posnr
menge
asqty
from zdrgsap into table i_zsap
where invno = p_invno.
loop at i_zsap.
concatenate i_zsap-posnr(4) '0' into v_posnr.
i_zsap1-ebeln = i_zsap-ebeln.
i_zsap1-posnr = v_posnr.
i_zsap1-asqty = i_zsap-asqty.
collect i_zsap1.
clear i_zsap1.
endloop.
delete adjacent duplicates from i_zsap comparing posnr menge .
delete adjacent duplicates from i_input comparing ebeln posnr.
loop at i_input.
p_werks = i_input-werks.
v_invdt = i_input-invdt.
call function 'CONVERT_DATE_FORMAT'
exporting
i_date = v_invdt
importing
e_calc_date = v_invdt.
if i_input-apcno is initial.
v_apcno = '0000'.
else.
v_apcno = i_input-apcno.
endif.
if i_input-spcno is initial.
v_spcno = '0000'.
else.
v_spcno = i_input-spcno.
endif.
if i_input-cntno is initial.
i_input-cntno = '0000'.
endif.
concatenate v_apcno v_spcno into i_input-pack.
concatenate v_pack v_cntno into v_order separated by '-'.
i_input-order = v_order.
clear : v_itm, v_cnt, v_cntno, v_pack, v_apcno, v_spcno, v_order.
concatenate i_input-posnr(4) '0' into v_posnr.
select single lifnr into p_lifnr from zdrgsup
where shcnm = i_input-shcnm.
v_lifnr = p_lifnr.
if sy-subrc <> 0.
message e000(zcnc) with text-002.
endif.
select single * from eban
where banfn eq i_input-ebeln
and bnfpo eq v_posnr.
if sy-subrc eq 0.
move eban-werks to i_input-werks.
move eban-lgort to i_input-lgort.
move eban-matkl to i_input-matkl.
move eban-bnfpo to i_test-bnfpo.
move eban-matnr to i_test-matnr.
move eban-menge to i_test-menge.
move eban-bsmng to i_test-bsmng.
modify i_input.
if not i_input-matnr eq i_test-matnr.
move i_input-ebeln to i_error-prnum.
move v_posnr to i_error-pritm.
move i_input-matnr to i_error-inmat.
move eban-matnr to i_error-prmat.
i_error-remak = 'Material does not match'.
append i_error.
clear i_error.
endif.
v_quant = i_test-menge - i_test-bsmng.
read table i_zsap1 with key ebeln = i_input-ebeln posnr = v_posnr.
if not i_zsap1-asqty <= v_quant.
move i_input-ebeln to i_error1-prnum.
move i_zsap1-posnr to i_error1-pritm.
move i_zsap1-asqty to i_error1-asqty.
move eban-menge to i_error1-prqty.
move v_quant to i_error1-prqty.
i_error1-remak = 'Material Quantity does not match'.
append i_error1.
clear i_error1.
endif.
select single matnr infnr from eina
into corresponding fields of i_eina
where matnr eq i_input-matnr
and lifnr eq p_lifnr.
if sy-subrc = 0.
append i_eina.
check not i_eina[] is initial.
select single * from eine
into i_eine
where infnr eq i_eina-infnr
and werks eq eban-werks.
if sy-subrc <> 0.
move i_input-matnr to i_inferr-matnr.
move i_eina-infnr to i_inferr-infnr.
move eban-werks to i_inferr-werks.
append i_inferr.
clear i_inferr.
endif.
else.
move i_input-matnr to i_inferrc-matnr.
append i_inferrc.
clear i_inferrc.
endif.
clear : i_eina, i_eine.
clear : i_zsap, i_zsap1, i_input, v_posnr,
v_quant, i_test.
endif.
endloop.
delete adjacent duplicates from i_error1 comparing prnum pritm.
perform chk_info_rec.
endform. " f_upload_data
*& Form f_check_data
form f_check_data .
if not i_input[] is initial.
select * from mara
into table i_mara
for all entries in i_input
where matnr eq i_input-matnr.
endif.
loop at i_mara.
read table i_input with key matnr = i_mara-matnr.
if sy-subrc <> 0.
write : 'Following Part Numbers are not found in MARA'.
write : / i_input-matnr.
endif.
endloop.
if i_mara[] is initial.
loop at i_input.
format color col_heading intensified off.
write : 'Following Part Numbers are not found in MARA'.
format color col_normal intensified off.
write : / i_input-matnr.
endloop.
endif.
select single wkurs into p_wkurs from zdrgkurs
where invno = p_invno.
if sy-subrc ne 0.
message e000(zcnc) with text-s11.
endif.
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = p_lifnr
importing
output = p_lifnr.
p_lifnrtxt = p_lifnr.
p_wkurstxt = p_wkurs.
p_bsartxt = p_bsart.
loop at i_input.
move-corresponding i_input to i_inputxt.
append i_inputxt.
endloop.
select single ebeln
angnr from ekko
into i_invno
where angnr = p_invno.
if sy-subrc = 0.
perform display_err.
endif.
endform. " f_check_data
*& Form f_process_session
text
form f_process_session.
v_docdt1 = sy-datum.
write v_docdt1 to v_docdt using edit mask '__.__.____'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEDOCTYPE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
perform bdc_field using 'BDC_CURSOR'
'MEPO1222-BUKRS'.
perform bdc_field using 'MEPO1222-EKORG'
'SBAP'.
perform bdc_field using 'MEPO1222-EKGRP'
'PG1'.
perform bdc_field using 'MEPO1222-BUKRS'
'SBA'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
********************conditions***************************************
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(08)'.
perform bdc_field using 'KOMV-KSCHL(07)'
'zot1'.
perform bdc_field using 'KOMV-KSCHL(08)'
'zinc'.
perform bdc_field using 'KOMV-KSCHL(09)'
'ziv1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAN'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMV-KSCHL(02)'
'zca1'.
perform bdc_field using 'KOMV-KSCHL(03)'
'zfa1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT7'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(09)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'MEPO1229-ANGNR'
p_invno.
perform bdc_field using 'MEPO1229-IHRAN'
v_invdt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4001BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
loop at i_inputxt.
concatenate i_inputxt-posnr(4) '0' into v_posnr.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_matnr.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_menge.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_banfn.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_bnfpo.
concatenate 'MEPO1211-BEDNR(' v_itno ')' into v_bednr.
concatenate 'MEPO1211-WERKS(' v_itno ')' into v_werks.
v_item = v_item + 10.
endif.
v_itno = v_itno + 1.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
v_matnr.
perform bdc_field using v_matnr "'MEPO1211-EMATN(01)'
i_inputxt-matnr.
perform bdc_field using v_menge "'MEPO1211-MENGE(01)'
i_inputxt-asqty.
perform bdc_field using v_banfn "'MEPO1211-BANFN(01)'
i_inputxt-ebeln.
perform bdc_field using v_bnfpo "'MEPO1211-BNFPO(01)'
i_inputxt-posnr.
perform bdc_field using 'DYN_6000-LIST'
v_itno.
loop at i_inputxt .
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
loop at i_inputxt from 6.
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
perform bdc_field using 'BDC_CURSOR'
'MEPO1320-SLFDT(01)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAK'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(05)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHECKDOC'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR'
'04/03'.
perform bdc_field using 'BDC_OKCODE'
'=&ONT'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(08)'.
perform bdc_field using 'KOMV-KBETR(03)'
' .54'.
perform bdc_field using 'KOMV-KBETR(08)'
' .54'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1211-NETPR(01)'.
perform bdc_transaction using 'ME21N'.
endform. "f_process_session
*& Form bdc_transaction
text
-->P_0464 text
form bdc_transaction using tcode.
data: l_mstring(480).
data: l_subrc like sy-subrc.
data: v_mode type c.
v_mode = 'A'.
refresh messtab.
call transaction tcode using bdcdata
mode v_mode
update 'S'
messages into messtab.
l_subrc = sy-subrc.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
loop at messtab.
select single * from t100 where sprsl = messtab-msgspra
and arbgb = messtab-msgid
and msgnr = messtab-msgnr.
if sy-subrc = 0.
l_mstring = t100-text.
if l_mstring cs '&1'.
replace '&1' with messtab-msgv1 into l_mstring.
replace '&2' with messtab-msgv2 into l_mstring.
replace '&3' with messtab-msgv3 into l_mstring.
replace '&4' with messtab-msgv4 into l_mstring.
else.
replace '&' with messtab-msgv1 into l_mstring.
replace '&' with messtab-msgv2 into l_mstring.
replace '&' with messtab-msgv3 into l_mstring.
replace '&' with messtab-msgv4 into l_mstring.
endif.
condense l_mstring.
if messtab-msgtyp eq 'E' or messtab-msgtyp eq 'W'.
write: / messtab-msgtyp, l_mstring(250).
endif.
search l_mstring for 'SEA'.
if sy-subrc = 0.
write: / messtab-msgtyp, l_mstring(250).
endif.
else.
write: / messtab.
endif.
endloop.
endform. " bdc_transaction
Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. "BDC_DYNPRO
Insert field *
form bdc_field using fnam fval.
if fval <> space.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endif.
endform. "BDC_FIELD
*& Form f_display_errors
form f_display_errors .
if i_error[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Part No',
(30) 'Invoiced Part No',
(60) 'Remark'.
uline .
loop at i_error.
perform f_display_color.
write :/ i_error-prnum,
(10) i_error-pritm ,
(20) i_error-prmat,
(30) i_error-inmat,
(60) i_error-remak.
clear i_error.
endloop.
endif.
if i_error1[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Quantity',
(30) 'Invoiced Quantity',
(60) 'Remark'.
uline .
loop at i_error1.
perform f_display_color.
if not i_error1-asqty is initial.
v_asqty = i_error1-asqty .
v_prqty = i_error1-prqty.
write :/ i_error1-prnum,
(10) i_error1-pritm ,
(20) v_prqty,
(30) v_asqty,
(60) i_error1-remak.
clear : v_asqty, v_prqty.
endif.
clear i_error1.
endloop.
endif.
endform. " f_display_errors
*& Form f_display_color
form f_display_color .
if v_flag = 0.
format color col_normal intensified on.
v_flag = 1.
elseif v_flag = 1.
format color col_normal intensified off.
v_flag = 0.
endif.
endform. " f_display_color
*& Form display_err
text
--> p1 text
<-- p2 text
form display_err .
format color col_heading intensified off.
write (120) text-006.
uline .
write : 'PR No ',
(15) 'Invoice No',
(30) 'Remark'.
uline.
format color col_negative intensified off.
write :/ i_invno-ebeln,
(15) p_invno ,
(30) 'Invoice Already Exists'.
endform. " display_err
*& Form f_check_calc_price
text
--> p1 text
<-- p2 text
form f_check_calc_price .
data : d_pric type p decimals 6 ,
g_pric type p decimals 6,
v_exch type p decimals 4 value '0.1049'.
select single ebeln
waers
bedat
from ekko into (v_ebeln , v_waers , v_podat)
where angnr eq p_invno.
loop at i_input.
concatenate i_input-posnr(4) '0' into v_posnr.
select single p~ebeln
p~ebelp
matnr
p~menge
netpr
into i_netpr
from eket as t inner join ekpo as p
on t~ebeln eq p~ebeln
and t~ebelp eq p~ebelp
where t~ebeln eq v_ebeln
and t~banfn eq i_input-ebeln
and t~bnfpo eq v_posnr.
if v_waers eq 'JPY'.
i_netpr-netpr = i_netpr-netpr * 100.
endif.
if not i_input-netpr eq i_netpr-netpr.
append i_netpr.
clear : i_input, i_netpr, v_posnr.
else.
clear : i_input, i_netpr, v_posnr.
endif.
endloop.
delete adjacent duplicates from i_netpr comparing ebeln ebelp matnr.
modify zinvdiff from table i_final.
if i_netpr[] is not initial.
select matnr
knumh
from a004
into table i_a004
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'SBAP'
and vtweg = 'DD'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr
knumh
from a004
into table i_a0041
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'EXPT'
and vtweg = 'BR'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr mvgr2 from mvke
into corresponding fields of table i_mvke
for all entries in i_netpr
where matnr = i_netpr-matnr
and vkorg = 'SBAP'
and vtweg = 'DD'.
if i_a004[] is not initial.
select knumh
kbetr
from konp
into table i_konp
for all entries in i_a004
where knumh = i_a004-knumh.
loop at i_a004.
read table i_konp with key knumh = i_a004-knumh.
i_konp-kbetr = i_konp-kbetr / 10.
move i_konp-kbetr to i_a004-kbetr.
modify i_a004.
clear : i_konp, i_a004.
endloop.
endif.
if i_a0041[] is not initial.
select knumh
kbetr
from konp
into table i_konp1
for all entries in i_a0041
where knumh = i_a0041-knumh.
loop at i_a0041.
read table i_konp1 with key knumh = i_a0041-knumh.
move i_konp1-kbetr to i_a0041-kbetr.
modify i_a0041.
clear : i_konp1, i_a0041.
endloop.
endif.
if i_mvke[] is not initial.
select pcode
fact
wfact
into table i_domsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'SBAP'
and vtweg = 'DD'
and lifnr = v_lifnr.
select pcode
fact
wfact
into table i_grpsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'EXPT'
and vtweg = 'BR'
and lifnr = v_lifnr.
endif.
loop at i_input .
read table i_mvke with key matnr = i_input-matnr.
if sy-subrc = 0.
move i_mvke-mvgr2 to i_input-mvgr2.
endif.
read table i_domsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
d_pric = i_domsal-fact / i_domsal-wfact.
i_input-dpric = i_input-netpr * d_pric * ( 112 / 100 ).
endif.
read table i_grpsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
g_pric = i_grpsal-fact * i_grpsal-wfact.
i_input-gpric = ( i_input-netpr * ( 112 / 100 ) ) / g_pric .
endif.
modify i_input.
clear i_input.
clear d_pric.
clear g_pric.
endloop.
endif.
endform. " f_check_price
*& Form f_display_data
text
--> p1 text
<-- p2 text
form f_display_data .
loop at i_netpr.
move i_netpr-ebeln to i_final-ebeln.
move i_netpr-ebelp to i_final-ebelp.
move i_netpr-matnr to i_final-matnr.
move i_netpr-netpr to i_final-poprc.
move i_netpr-menge to i_final-asqty.
move p_invno to i_final-invoice.
append i_final.
clear i_final.
endloop.
loop at i_final.
move v_podat to i_final-podat.
read table i_input with key matnr = i_final-matnr.
move i_input-netpr to i_final-invpr.
move i_input-dpric to i_final-dcalclp.Dear Santosh,
I haven't gone through your piece of code.
But I can suggest a way out, while handling multiple line-items.
The following code sample elucidate the use of multiple line-items. This is just an example for your understanding.
FORM BDC_OPERATION .
DATA: LV_ARBPL(15) TYPE C,
LV_ROWNO(2) TYPE N.
LOOP AT IT_TABDATA INTO WA_TABDATA.
CLEAR: LV_ARBPL
LV_ROWNO = SY-TABIX.
CONCATENATE 'PLPOD-ARBPL' '(' LV_ROWNO ')' INTO LV_ARBPL.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' LV_ARBPL.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PICK'.
PERFORM BDC_FIELD USING LV_ARBPL WA_TABDATA-ARBPL.
ENDLOOP.
ENDFORM. " BDC_OPERATION
Regards,
Abir
Please don't forget to award points * -
First off, thanks to kglad for the line graph function I
started with, it has been a huge help. Now the step I'm trying to
take is 2 fold.
First, I'd like to graph more than one line segment on the
graph. Right now I am graphing functions f1 and f2, but f2
currently overwrites f1. I want them to coincide so f1 goes from
x=1 to x=15, f2 goes from x=15 to x=25, f3 goes from x=25 to x=10
at a different y (these are all curves), and finally f4 goes from
x=10 to x=1 creating a closed shape. Also, I want the x values and
the y values to be variable based on the temperature. I'm using
PV=nRT and n, R, and T are all known. so I have something like
P=nRT/V where P is y, V is X and the nRT can be calculated for two
steps of the 4. The other two steps are adiabatic, so Q=0, I don't
know yet how to fit the lines but i do know that y = a / (x^(5/3))
is a formula that works, I just need to find the proper a values
for steps 2 and 4.
Part two of this issue is that currently the graph is drawing
as the whole canvas, which is fine for testing until i get the
multiple line part worked out; however I only want this to be 1/4
of the viewing area as I have other movie clips and such to put on
this. A conceptual drawing of what I plan on making can be found
at:
http://www.students.bucknell.edu/gbement/Steps.html
I'm a novice to Actionscript and movie clips, I previously
did everything with motion tweens and nothing was dynamic. I plan
on creating the piston and molecule simulation in another movie
clip, then I can vary the play speed relative to the hot and cold
temperatures by looping the movieclip and having it play faster for
a high T and slower for a low T.
Any help on any of my many issues would be greatly
appreciated and the user will be recognized for their assistance in
my research presentation :)Hi Arun, thanks again for the help but upon closer inspection
(along with only a basic knowledge of java and actionscript), I
think your script would need editing to work for me (editing i'm
unsure of how to do). What I'm looking for is a graph that will
create a line based on a function. Much like y=(a*b*c)/x or
y=(a*b*c)/(x^1.66) The a*b*c would be complicated also, but here's
what i've thought up on paper that I have to move to script, I hope
this is useful:
Step 1: Calculate the a*b*c
The original function is PV=nRT , nRT being the a*b*c ,
however the Thot and Tcold terms are input boxes that the user
types in before hitting the "go" button.
So I have to do this much:
tcold = Number(tcold_num.text);
thot = Number(thot_num.text);
var n:Number = 1;
var R:Number = 0.0825;
var a:Number;
var b:Number;
var c:Number;
var d:Number;
a = n*R*thot // Step 1 constant
b = // Step 2 constant (formula to be finished :-/) Looks to
be a formula using ((b) / (Math.pow(x, 1.666)))
c = n*R*tcold // Step 3 constant
d = // Step 4 constant (formula to be finished :-/)
Then I need to find a way to initialize axis to line the
graph, I can label the P and V axis using static text boxes later I
suppose.
The problem I have with yours that I don't understand is that
I could add the function into the y part of the addLine() function,
however it's noted as inity= y1 (requires a number), and the
function definition has y1:Number.
Now the issue i'm tackling below is just a newbie's lack of
understanding (i hope), but the script kglad wrote (snipped below)
will graph one line, and i can't figure out for the life of me how
to write this up to graph more than one instance without
overwritting the previous line. Again, Thanks for the help so far,
it has helped me find the points where I lacked direction and solid
ideas before. -
Posting an Idoc with Multiple Headers and Multiple Lines
Hi all,
I have a scenario like this fileXIIdoc
Invoice file comes in text file with multiple header and multiple lines like this
111 aaa 13214234 US (header)
09082010 ABC 9999 A (Line)
222 ccc 43454543 US (header)
09082010 XYZ 7777 B (Line)
09082010 PQR 8888 C (Line)
I need to post single Idoc with all the headers and lines
we are planning to use Custom Idoc,Is this possible by having the header segment as unbounded??
Regards
Edited by: Vamsi Krishna on Sep 8, 2010 8:05 PMhi,
lets go again.
you have to edit the custom IDoc and change the ocurrance on the header segment. also modify the details segment adding an addtional field that identify which header that this detail belong.
for this case you cannot change the occurrance in SAP PI because you wont identify what i have told you before. in PI apply to change the occurrance if you could send ONE Idoc Per Header.
now is better clear???
Let us know.
Thanks
Rodrigo P-. -
OBIEE BI Apps data level security involving multiple PeopleSoft Segments
Has anyone implemented OBIEE BI Apps data level security involving multiple PeopleSoft Segments and can provide some tips?
Our PeopleSoft security grants access by 2 segment combinations:
All Segment 3 (Department) and any Segment 6 (Project)
Specific Segment 6
Specific combinations of Segment 3 and Segment 6
In addition, there is a flag to indicate if the user also has access to payroll data. Payroll access is a subset of the general finance access.
We've got a security init blocks running successfully for general finance and payroll access. We've created Data filters on the Segments for general finance access and GL Account for payroll access. We designed dashboards to use Dept and Project from the Segments on the general finance dashboards and pull Dept and Project from GL Account for the payroll dashboards.
The problem is both data filters are being applied to the general finance dashboards since the joins behind the scenes on the general finance dashboards use GL Account.
Does anyone have a suggestion?Business Intelligence Applications
-
Hi , I have a scenerio to extarct the billing plan items in my report. When I run the report it gives me the required output but with multiple line items . I am not sure if my sleection is bring in data from both billing plan header as well as billing plan item data . I just need to bring in the data from the item level which will resolve the issue of multiple line items showing up in the report, my selection is as follows , please comment if I am selecting form both the header as well as item level,
IF p_rental = 'X' .
SELECT a~vbeln a~ktext a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~vkaus b~aufnr b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~netwr
b~oidrc b~oid_ship AS kunwe b~zzwprofid c~datbi c~datab b~route
e~fkdat e~nfdat e~fakwr e~fksaf e~afdat
f~fpart f~bedat f~endat f~horiz g~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN vbkd AS d ON a~vbeln = d~vbeln
INNER JOIN fplt AS e ON d~fplnr = e~fplnr
INNER JOIN fpla AS f ON e~fplnr = f~fplnr
LEFT OUTER JOIN tvlvt AS g ON b~vkaus = g~abrvw
AND g~spras = 'E'
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln
AND b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~ktext IN s_ktext
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
AND b~route in s_route
AND b~matnr IN s_matnr
AND e~afdat IN s_afdat
AND e~fksaf IN s_fksaf
AND b~pstyv in s_pstyv.
SORT gt_sel.
IF NOT gt_sel[] IS INITIAL.
** Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
ENDIF.
* Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
* Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
if sy-subrc = 0.
gs_report-kunre = gs_vbpa-kunnr.
endif.
* Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
APPEND gs_report TO gt_report.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report .
ThanksHi,
Try debugging the code and after the select query and sort just check the gt_sel table if it contains any duplicate entries, if it is so, then there is some problem in inner join and left outer join and left outer join takes all the entries from left hand tables and only selected entries from right hand table so if the right hand table contains 3 to 4 entries then the same records from the left hand table is repeated for 3 to 4 times due to which you feel that the records are repeated.
just check with the query and instead of using joins which is very costly statement try separating the query for each table and then using different internal tables you can collaborate the data into one single and avoid repetation.
Regards,
Ravi -
Dropped line segments in dxf files
I have recently noticed when opening large E size dxf files which were created in CAD programs that some entities are dropped. At times it is dropping critical artwork.
I am suspecting there is a limitation on the amount of line segments Illustrator can import. Has anyone else experienced this before and is there a solution?
Thanks,
MarkSorry Kurt, I should have mentioned that in my original message.
I am using Illustrator CS2. We use multiple CAD programs but most of the drawings come from UniGraphics NX3 & NX5 or an older Unix program named DDN (Design Drafting Numerical Control). The dxf's are created from a viewing program developed by Cadman Corp. named Viewport. The files are plotted from the CAD programs into Viewport then they can be taken from viewport as dxf, pdf, or IGES files. We experience the same phenomenon from the pdf files only worse and the IGES files cannot be opened in Illustrator.
The missing artwork is present when viewed in Viewport or if we open the same dxf in SolidEdge. The results are not consistent from file to file, sometimes artwork is missing other times no art is missing but we have not been able to come up with a pattern other than it only seems to occur with larger 'E' size drawings.
Thanks for your help,
Mark -
Is it possible to draw multiple disconnected line segments as a single plot
in CWgraph or do I need to
implement these as separate plots. (if so, how many plots can I put on a
graph??)
Thanks
SteveSI'm not sure exactly what you mean by disconnected line segments but I will give you a few suggestions based on what I think you mean.
If you want to draw a bar chart, yes you can simulate this with one array of data and a single plot. To do this you can go to the Property pages of the CWGraph and select the Plots tab, from here change the line style drop down menu to XY Step and check the Fill to base and Lines checkboxes. Tada! you can see the style of your graph now resembles a bar chart. Now I know that the bars are all right up against one another, but if you want to get around this you can set the index that you would like a separation at to 0 so that basically that line is drawn at the origin. The other drawback is that if you want separate colors you will
absolutely have to have separate plots one for each color, and I'm sure you can understand what to do here from what I've already said.
Now the other thing I thought you might have meant was to just simply draw multiple irrelevant lines on one graph and the answer to this is yes as well. Just go to the Property pages for the graph and select the PLots tab and click the 'add' button to add more, they will all have their own settings for style and you can also associate them with different axes under the Axes tab.
Other than that you will have to specify more exactly what it is you are looking for and if you aren't quite sure you can do quite a bit of research yourself by studying the ComponentWorks online help, the ComponentWorks examples in your Measurement Studio\VB\Samples directory, and by opening up the Object Browser in VB and looking at all of the properties and methods exposed by the CWGraph object for programmatic manipulation of the control.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask
Maybe you are looking for
-
Update termination error in IW32 because of requisition flag change
Has anyone worked on IW32 to change the requisition flag of a work order from never to immediate. I tried doing this using BAPI_ALM_ORDER_MAINTAIN. It works fine for work order having operation control key same for every operation. But if this contro
-
What is the correct file version?
Why does it appear that there are differing file versions for Firefox, Thunderbird and SeaMonkey depending where you look? Windows Explorer show one file version for example 1.9.2.3951 is the 3.6.12 product version but yet our SCCM reports 1.9.2.12 f
-
HI fds while creating maintenance work order. scheduling is not carried out it is giving the following msg. Scheduling log does not contain any entries Message no. C7119 i have maintain all the scheduling parameters , so scheduling should be carried
-
Internet Security protection for iPad
New to iPad. Forgive my stupid question. I learned today I can't download Norton Internet Security onto my iPad. How can I protect my personal info. and credit card # when ordering stuff online using my iPad? Is my iPad protected from viruses?
-
I realized that at least half of my music library is saved as MP3 and the other half (that imported from my old CDs collection) is M4a. When I burn the CDs in order to listen in the car unfourtunately the m4a is not recognized/played by the car. I tr