Joins for Quality Tables
Hi,
Could you give me joins for below tables, r12.
qa_results
qa_results_v
cs_incidents_audit_b
Thanks.
You can get from etrm, refer this link: http://etrm.oracle.com/pls/et1211d9/etrm_fndnav.show_object?n_tabid=55117&n_appid=250&c_type=TABLE http://etrm.oracle.com/pls/et1211d9/etrm_search.search thanks
Similar Messages
-
Hi,
Could you provide joins for below tables:
mtl_system_items_b
mtl_kanban_cards
mtl_onhand_quantities_detail
MTL_SECONDARY_INVENTORIES
MTL_ITEM_CATEGORIES
MTL_CATEGORY_SETS_TL
MTL_CATEGORIES_B
ThanksYes it is kind of limitation in obiee. But there are some solutions which might deviate from best practices.
Sol 1. Snowflake the dimensions in Business Model. Rather than merging both of them into single logical table, separate them into two different logical tables.
Sol 2. For the logical table , have two LTSs. First LTS will have both tables and all columns mapped to both tables. Second LTS will have only main table, Columns belong to that table only mapped. In this way when you selected columns related to first source system will use second LTS which has only only one table.
- Madan Thota -
Outer Join for 2 Tables?
Hi,
i have 3 Tables, one is the "main" table.
Table1
Col1
Col2
Col3
Table2
Col2
Col4
Col5
Table3
Col4
Col6
Now i want all hits from Table 1, all outer join hits from table 2 and the regarding rows from table 3.
The join from Table1 to Table2 is no problem, but how to add table3?
SELECT *
FROM table1 AS t1
LEFT OUTER JOIN table2 AS t2
ON t2col2 = t1col2
INTO CORRESPONDING FIELDS OF TABLE result
WHERE t1~col1 IN so_col1.Hi,
a right table in an outer join cannot become a part of an inner join or an outer join. So you will have to use some other technique.
meaing table1 connects to table2 with an outer join resulting in all rows table1 and cooresponding if existing from table2, now table2 is the right table it cannot make a join with table3. inner or outer.
regards,
Khusro Habib -
dear friends
kna1- kunnr ,name1
vbak - vbeln , erdat
vbap - meins , kwmeng
on above i have given three tables and their fields in front of this
can any one tel me how to give inner join in select statement for the above tablesHi Create an appropriate internal table ITAB
Select VBAK~VBELN
VBAK~ERDAT
VBAP~POSNR
VBAP~MEINS
VBAP~kwmeng
KNA1~KUNNR
KNA1~NAME1
From VBAK
Into Table ITAB
Inner Join VBAP On VBAKVBELN = VBAPVBELN
Inner Join KNA1 On VBAK~KUNNR = KNA1-KUNNR
Where VBAK~VBELN In S_VBELN.
Santhosh -
Problem when doing inner join for three tables....
DATA: V3 TYPE VBAP-MAKTL.
SELECT single vbap~matkl into V3
from VBAP
inner join VBFA
inner join LIPS
on LIPSPOSNR = VBFAPOSNN
and vbapvbeln = vbfavbelv
and vbapposnr = vbfaposnv
where LIPSVBELN = VBFAVBELN = '0080000834'
and vbfa~vbtyp_n = 'J'
and LIPS~J_3ASIZE = '0884'.
Error: Wrong expression "INNER" in from clause...Hello Tushar,
Why you are using the 3 table inner join. If the volume of data is big then this statement will give to time out. Use "for all entries" statement to select the data from the table.
Like
select field1 field2 from LIPS into i_lips
where LIPS~J_3ASIZE = '0884'.
select f3 f4 from vbfa into i_vbfa for all entries in i_lips where field1 = i_lips-field1 and so on
and
use same to select data from VBAP.
Hope this will help -
Tables/Joins for logical tables being combined
I have 2 logical tables set up that have multiple physical table sources (using map to these tables). Some of the physical sources are the same in each logical table. It seems that when I make selections from Answers and look at the SQL, it is picking tables from both logical tables (instead of just the one I used). It is also grabbing the content (additional 'where condition') from the other logical table as well. Why is it doing that?
Yes it is kind of limitation in obiee. But there are some solutions which might deviate from best practices.
Sol 1. Snowflake the dimensions in Business Model. Rather than merging both of them into single logical table, separate them into two different logical tables.
Sol 2. For the logical table , have two LTSs. First LTS will have both tables and all columns mapped to both tables. Second LTS will have only main table, Columns belong to that table only mapped. In this way when you selected columns related to first source system will use second LTS which has only only one table.
- Madan Thota -
Hello All
i have these to tables
country: name,population
borders: country1,country2
every country have some neghbors, in borders table,
now i should calculate sum of pupulation of all neighbors of every country
thank u so much for ur help
I use oracle 11g
bestThis is the SQL to create the table
now i hope i will get an answer
-- File created - Tuesday-April-30-2013
-- DDL for Table BORDERS
CREATE TABLE "intern"."BORDERS" ("COUNTRY1" CHAR(2), "COUNTRY2" CHAR(2), "LENGTH" NUMBER)
COMMENT ON COLUMN "intern"."BORDERS"."COUNTRY1" IS 'a country code'
COMMENT ON COLUMN "intern"."BORDERS"."COUNTRY2" IS 'a country code'
COMMENT ON COLUMN "intern"."BORDERS"."LENGTH" IS 'length of the border between country1 and country2'
COMMENT ON TABLE "intern"."BORDERS" IS 'informations about neighboring countries'
REM INSERTING into intern.BORDERS
SET DEFINE OFF;
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ad','es',63);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('md','ua',939);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mk','yu',221);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ml','mr',2237);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ml','ne',821);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ml','sn',419);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mm','th',1800);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mn','ru',3543);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mr','sn',813);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mw','mz',1569);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mw','tz',475);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mw','zm',837);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mx','us',3141);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('my','th',506);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mz','sz',105);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mz','tz',756);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mz','za',491);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mz','zm',419);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('mz','zw',1231);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('na','za',967);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('na','zm',233);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ne','ng',1497);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ne','td',1175);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ng','td',87);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('no','ru',196);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('no','se',1619);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('om','sa',676);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('om','ye',288);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('pl','ru',206);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('pl','sk',444);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('pl','ua',526);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('qa','sa',60);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ro','ua',531);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ro','yu',476);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('ru','ua',1576);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('rw','tz',217);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('rw','ug',169);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sa','ye',1458);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sd','td',1360);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sd','ug',435);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sk','ua',97);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sy','tr',822);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('sz','za',430);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('tj','uz',1161);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('tm','uz',1621);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('tz','ug',396);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('tz','zm',338);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('za','zw',225);
Insert into intern.BORDERS (COUNTRY1,COUNTRY2,LENGTH) values ('zm','zw',797);
-- DDL for Index BORDERS_KEY
CREATE UNIQUE INDEX "intern"."BORDERS_KEY" ON "intern"."BORDERS" ("COUNTRY1", "COUNTRY2")
-- Constraints for Table BORDERS
ALTER TABLE "intern"."BORDERS" ADD CONSTRAINT "BORDERS_KEY" PRIMARY KEY ("COUNTRY1", "COUNTRY2") ENABLE
ALTER TABLE "intern"."BORDERS" ADD CONSTRAINT "BORDERS_LENGTH_CHECK" CHECK (
Length > 0
) ENABLE
-- File created - Tuesday-April-30-2013
-- DDL for Table COUNTRY
CREATE TABLE "intern"."COUNTRY" ("NAME" VARCHAR2(40), "CODE" CHAR(2), "CAPITAL" VARCHAR2(40), "PROVINCE" VARCHAR2(40), "POPULATION" NUMBER, "AREA" NUMBER)
COMMENT ON COLUMN "intern"."COUNTRY"."NAME" IS 'the country name'
COMMENT ON COLUMN "intern"."COUNTRY"."CODE" IS 'the internet country code (two letters)'
COMMENT ON COLUMN "intern"."COUNTRY"."CAPITAL" IS 'the name of the capital'
COMMENT ON COLUMN "intern"."COUNTRY"."PROVINCE" IS 'the province where the capital belongs to'
COMMENT ON COLUMN "intern"."COUNTRY"."POPULATION" IS 'the population number'
COMMENT ON COLUMN "intern"."COUNTRY"."AREA" IS 'the total area'
COMMENT ON TABLE "intern"."COUNTRY" IS 'the countries of the world with some data'
REM INSERTING into intern.COUNTRY
SET DEFINE OFF;
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Andorra','ad','Andorra la Vella','Andorra la Vella',69865,468);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('United Arab Emirates','ae','Abu Dhabi','Abu Dhabi',2523915,82880);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Afghanistan','af','Kabul','Kabul',28513677,647500);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Antigua and Barbuda','ag','Saint Johns','Saint John',68320,442.6);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Netherlands','nl','Amsterdam','Noord-Holland',16318199,41526);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Norway','no','Oslo','Akershus',4574560,324220);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Nepal','np','Kathmandu','Kathmandu',27070666,140800);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Nauru','nr',null,null,12809,21);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Niue','nu',null,null,2156,260);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('New Zealand','nz','Wellington','Wellington',3993817,268680);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Oman','om','Muscat','Muscat',2903165,212460);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Panama','pa','Panama','Panama',3000463,78200);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Peru','pe','Lima','Lima y Callao',27544305,1285220);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('French Polynesia','pf','Papeete','Iles du Vent',266339,4167);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Papua New Guinea','pg','Port Moresby','National Capital District',5420280,462840);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Philippines','ph','Manila','National Capital Region',86241697,300000);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Pakistan','pk','Islamabad','Federal Capital Area',159196336,803940);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Poland','pl','Warsaw','Mazowieckie',38626349,312685);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Saint Pierre and Miquelon','pm','Saint-Pierre','Saint-Pierre',6995,242);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Pitcairn Islands','pn',null,null,46,47);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Puerto Rico','pr','San Juan','San Juan',3897960,9104);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Palestine','ps','Ramallah','Gaza Strip',3762005,6220);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Portugal','pt','Lisbon','Lisboa e Vale do Tejo',10524145,92391);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Palau','pw','Koror','Koror',20016,458);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Paraguay','py','Asuncion','Asuncion',6191368,406750);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Qatar','qa','Doha','Doha',840290,11437);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Reunion','re','Saint-Denis','Saint-Denis',766153,2517);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Romania','ro','Bucharest','Bucharest',22355551,237500);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Russia','ru','Moscow','Moscow',143782338,17075200);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Rwanda','rw','Kigali','Ville de Kigali',7954013,26338);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Saudi Arabia','sa','Riyadh','Riyadh',25795938,1960582);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Solomon Islands','sb','Honiara','Guadalcanal',523617,28450);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Seychelles','sc',null,null,80832,455);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Sudan','sd','Khartoum','Khartoum',39148162,2505810);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Sweden','se','Stockholm','Stockholm',8986400,449964);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Singapore','sg',null,null,4353893,692.7);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Saint Helena','sh','Jamestown','Saint Helena',7415,410);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Slovenia','si','Ljubljana','Osrednjeslovenska',2011473,20273);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Svalbard','sj','Longyearbyen','Svalbard',2756,62049);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Slovakia','sk','Bratislava','Bratislavsky',5423567,48845);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Sierra Leone','sl','Freetown','Western',5883889,71740);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('San Marino','sm','San Marino','San Marino',28503,61.2);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Senegal','sn','Dakar','Dakar',10852147,196190);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Somalia','so','Mogadishu','Banadir',8304601,637657);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Suriname','sr','Paramaribo','Paramaribo',436935,163270);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Sao Tome and Principe','st','Sao Tome','Agua Grande',181565,1001);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('El Salvador','sv','San Salvador','San Salvador',6587541,21040);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Syria','sy','Damascus','Damascus',18016874,185180);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Swaziland','sz','Mbabane','Hhohho',1169241,17363);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Turks and Caicos Islands','tc',null,null,19956,430);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Chad','td','NDjamena','Chari-Baguirmi',9538544,1284000);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Togo','tg','Lome','Maritime',5556812,56785);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Thailand','th','Bangkok','Bangkok Metropolitan Area',64865523,514000);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tajikistan','tj','Dushanbe','Dushanbe',7011556,143100);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tokelau','tk',null,null,1405,10);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Turkmenistan','tm','Asgabat','Asgabat',4863169,488100);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tunisia','tn','Tunis','Tunis',9974722,163610);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tonga','to','Nukualofa','Tongatapu',110237,748);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('East Timor','tp','Dili','Dili',1019252,15007);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Turkey','tr','Ankara','Ankara',68893918,780580);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Trinidad and Tobago','tt','Port of Spain','Port of Spain',1096585,5128);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tuvalu','tv','Vaiaku','Funafuti',11468,26);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Taiwan','tw','Taipei','Taipei Hsien',22749838,35980);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Tanzania','tz','Dar es Salaam','Dar es Salaam',36588225,945087);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Ukraine','ua','Kiev','Kiev',47732079,603700);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Uganda','ug','Kampala','Central',26404543,236040);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('United Kingdom','uk','London','England',60270708,244820);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('United States','us','Washington','District of Columbia',293027571,9631418);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Uruguay','uy','Montevideo','Montevideo',3399237,176220);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Uzbekistan','uz','Tashkent','Tashkent',26410416,447400);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Holy See','va',null,null,921,0.44);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Saint Vincent and the Grenadines','vc','Kingstown','Saint George',117193,389);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Venezuela','ve','Caracas','Distrito Capital',25017387,912050);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('British Virgin Islands','vg','Road Town','Tortola',22187,153);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Virgin Islands','vi','Charlotte Amalie','Saint Thomas',108775,352);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Vietnam','vn','Ha Noi','Dong Bang Song Hong',82689518,329560);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Vanuatu','vu','Vila','Shefa',202609,12200);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Wallis and Futuna','wf','Matautu','Hahake',15880,274);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Samoa','ws','Apia','Apia Urban Area',177714,2944);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Yemen','ye','Sana','Amanah al-Asmah',20024867,527970);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Mayotte','yt','Mamoudzou','Mayotte',186026,374);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Serbia and Montenegro','yu','Belgrade','Central Serbia',10825900,102350);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('South Africa','za','Pretoria','Gauteng',42718530,1219912);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Zambia','zm','Lusaka','Lusaka',10462436,752614);
Insert into intern.COUNTRY (NAME,CODE,CAPITAL,PROVINCE,POPULATION,AREA) values ('Zimbabwe','zw','Harare','Harare',12671860,390580);
-- DDL for Index COUNTRY_KEY
CREATE UNIQUE INDEX "intern"."COUNTRY_KEY" ON "intern"."COUNTRY" ("CODE")
-- DDL for Index COUNTRY_NAME_UNIQUE
CREATE UNIQUE INDEX "intern"."COUNTRY_NAME_UNIQUE" ON "intern"."COUNTRY" ("NAME")
-- Constraints for Table COUNTRY
ALTER TABLE "intern"."COUNTRY" ADD CONSTRAINT "COUNTRY_AREA_CHECK" CHECK (
Area >= 0
) ENABLE
ALTER TABLE "intern"."COUNTRY" ADD CONSTRAINT "COUNTRY_KEY" PRIMARY KEY ("CODE") ENABLE
ALTER TABLE "intern"."COUNTRY" MODIFY ("NAME" CONSTRAINT "COUNTRY_NAME_NOTNULL" NOT NULL ENABLE)
ALTER TABLE "intern"."COUNTRY" ADD CONSTRAINT "COUNTRY_NAME_UNIQUE" UNIQUE ("NAME") ENABLE
ALTER TABLE "intern"."COUNTRY" ADD CONSTRAINT "COUNTRY_POPULATION_CHECK" CHECK (
Population >= 0
) ENABLE -
Joins for PO & RCV tables in R12
Could you provide me joins for below tables
rcv_shipment_headers rsh
rcv_shipment_lines rsl
rcv_transactions rct
po_headers_all poh
po_lines_all pol
Thanksrsh.shipment_header_id = rsl.shipment_header_id
AND rsl.po_header_id = rct.po_header_id
AND rsl.po_line_id = rct.po_line_id
AND rct.po_header_id = poh.po_header_id
AND rct.po_line_id = pol.po_line_id
AND poh.po_header_id = pol.po_header_id
Thanks,
PS. -
Joins for CRM - Service tables
Hi,
Could you let me know joins for below tables.
CS_INCIDENT_TYPES_TL Name (SR Name)
MTL_SYSTEM_ITEMS_B
cs_incidents_audit_b
csi_item_instances
csi_iea_values
csi_iea_values_h
Q_ESTIMATE_DETAILS_V
JTF_TASK_AUDITS_B
jtf_task_assignments_audit_b
csi_item_instances_h
cs_incident_statuses_vl
QA_RESULTS
QA_RESULTS_V
Thanks
PraveenCould you let me know joins for above tables.
-
Hi i have got this query that is a join of two tables but i need join for three tables i need the extended query
select aauthlname aauthlnam aauthfname aauthfnam aisbn btitle
from ( bsauthors as a inner join bsbook as b on aisbn = bisbn )
into corresponding fields of table books
where aauthlname like authorlname or aauthfname like authorfname
order by aauthlname aauthfname a~isbn.Hi pavan
Plz try the following querry for joins on three tables :
" Customize it to ur requirements and tablenames
Parameters : b type mara-matnr.
select xmatnr xmtart xmatkl ywerks ylgort zmaktx
into corresponding fields of table itab
from ( ( mara as x inner join mard as y on xmatnr = ymatnr )
inner join makt as z on xmatnr = zmatnr ) where x~matnr = a and
y~werks
= b .
Plz see that there is atleast one field common between the three tables u want to use.
Regards
Pankaj -
Performance for join 9 custom table with native SQL ?
Hi Expert,
I need your opinion regarding performance to join 9 tables with native sql. Recently i have to tunning some customize extraction cost report. This report extract about 10 million cost of material everyday.
The current program actually, try to populate the condition data and insert into customize table and join all the table to get data using native sql.
SELECT /*+ ordered use_hash(mst,pg,rg,ps,rs,dpg,drg,dps,drs) */
mst.werks, ....................................
FROM
sapsr3.zab_info mst,
sapsr3.zab_pc pg,
sapsr3.zab_rc rg,
sapsr3.zab_pc ps,
sapsr3.zab_rc rs,
sapsr3.zab_g_pc dpg,
sapsr3.zab_g_rc drg,
sapsr3.zab_s_pc dps,
sapsr3.zab_s_rc drs
WHERE mst.zseq_no = :p_rep_run_id
AND mst.werks = :p_werks
AND mst.mandt = rg.mandt(+)
AND mst.ekorg = rg.ekorg(+)
AND mst.lifnr = rg.lifnr(+)
AND mst.matnr = rg.matnr(+)
............................................... unitl all table (9 tables)
AND ps.mandt = dps.mandt(+)
AND ps.knumh = dps.knumh(+)
AND ps.zseq_no = dps.zseq_no(+)
AND COALESCE (dps.kbetr, drs.kbetr, dpg.kbetr, drg.kbetr) <> 0
It seems the query ask for database to using hashed table. would that be it will burden the database ? and impacted to others sap process ?
Please advise
Thank You and Best Regardsyou can only argue coming from measurements and that is not the case.
Coming from the code, I see only that you do not understand it at all, so better leave it as it is. It is not a hash table, but a hash join on these table. -
WHERE clause creating a join for two or more tables
The CS3 Dreamweaver book says that the WHERE clause can
create a join for two or more tables. The join was created, but the
data is repeating. I have searched the web and this forum and have
not found the answer.
My Master page filters the recordset by Style No and when a
customer clicks on a particular style, it sends him to the Detail
page. All the records are showing from all tables on the detail
page from the Dynamic List, except they are showing multiple times
(ex. Size table has 4 sizes and Color table has 2 colors - my Size
Drop Down list is showing 8 options and my Color Drop Down List is
showing 8 options) I have a Master Page with a recordset pointing
to a Detail Page using the same recordset.
Master page works perfectly.
Master Recordset SQL:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, coloroption.color,
sizeoption.size
FROM products, coloroption, sizeoption
WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
products.styleno=coloroption.styleno
GROUP BY products.styleno
ORDER BY styleno ASC
The Detail Recordset:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, sizeoption.size,
coloroption.color
FROM products, sizeoption, coloroption
WHERE itemID=colname AND products.styleno=sizeoption.styleno
AND products.styleno=coloroption.styleno
I tried using the GROUP BY on the detail page, but then it
only showed one size and color from the dynamic drop down list. I
tried changing the field name "styleno" in the other tables to be
unique, however, I was using the table identifer. I tried using the
JOIN command instead of the WHERE clause and that didn't help
either.
On the detail page, the customer is supposed to click on the
Size box and see sizes XSM - 6XL ONLY ONE TIME. and then be able to
click on the Color option and see White, Black, Red ONE TIME.
Is this possible?
Thank you for giving your time to read this.!
EvieDo you have a link we can look at to see what you are trying
to do?
Dave
"EviePhillips" <[email protected]> wrote in
message
news:[email protected]...
> The CS3 Dreamweaver book says that the WHERE clause can
create a join for
two
> or more tables. The join was created, but the data is
repeating. I have
> searched the web and this forum and have not found the
answer.
>
> My Master page filters the recordset by Style No and
when a customer
clicks on
> a particular style, it sends him to the Detail page. All
the records are
> showing from all tables on the detail page from the
Dynamic List, except
they
> are showing multiple times (ex. Size table has 4 sizes
and Color table has
2
> colors - my Size Drop Down list is showing 8 options and
my Color Drop
Down
> List is showing 8 options) I have a Master Page with a
recordset pointing
to a
> Detail Page using the same recordset.
>
> Master page works perfectly.
> Master Recordset SQL:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> coloroption.color, sizeoption.size
> FROM products, coloroption, sizeoption
> WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
> GROUP BY products.styleno
> ORDER BY styleno ASC
>
> The Detail Recordset:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> sizeoption.size, coloroption.color
> FROM products, sizeoption, coloroption
> WHERE itemID=colname AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
>
> I tried using the GROUP BY on the detail page, but then
it only showed
one
> size and color from the dynamic drop down list. I tried
changing the
field
> name "styleno" in the other tables to be unique,
however, I was using the
table
> identifer. I tried using the JOIN command instead of the
WHERE clause and
that
> didn't help either.
>
> On the detail page, the customer is supposed to click on
the Size box and
see
> sizes XSM - 6XL ONLY ONE TIME. and then be able to click
on the Color
option
> and see White, Black, Red ONE TIME.
>
> Is this possible?
>
> Thank you for giving your time to read this.!
> Evie
>
> -
Can we implement the custom sql query in CR for joining the two tables
Hi All,
Is there anyway to implement the custom sql query in CR for joining the two tables?
My requirement here is I need to write sql logics for joining the two tables...
Thanks,
GanaIn the Database Expert, expand the Create New Connection folder and browse the subfolders to locate your data source.
Log on to your data source if necessary.
Under your data source, double-click the Add Command node.
In the Add Command to Report dialog box, enter an appropriate query/command for the data source you have opened.
For example:
SELECT
Customer.`Customer ID`,
Customer.`Customer Name`,
Customer.`Last Year's Sales`,
Customer.`Region`,
Customer.`Country`,
Orders.`Order Amount`,
Orders.`Customer ID`,
Orders.`Order Date`
FROM
Customer Customer INNER JOIN Orders Orders ON
Customer.`Customer ID` = Orders.`Customer ID`
WHERE
(Customer.`Country` = 'USA' OR
Customer.`Country` = 'Canada') AND
Customer.`Last Year's Sales` < 10000.
ORDER BY
Customer.`Country` ASC,
Customer.`Region` ASC
Note: The use of double or single quotes (and other SQL syntax) is determined by the database driver used by your report. You must, however, manually add the quotes and other elements of the syntax as you create the command.
Optionally, you can create a parameter for your command by clicking Create and entering information in the Command Parameter dialog box.
For more information about creating parameters, see To create a parameter for a command object.
Click OK.
You are returned to the Report Designer. In the Field Explorer, under Database Fields, a Command table appears listing the database fields you specified.
Note:
To construct the virtual table from your Command, the command must be executed once. If the command has parameters, you will be prompted to enter values for each one.
By default, your command is called Command. You can change its alias by selecting it and pressing F2. -
Table.Join/Merge in Power Query takes extremly long time to process for big tables
Hi,
I tried to simply merge/inner join two big tables(one has 300,000+ rows after filtering and the other has 30,000+ rows after filtering) in PQ. However, for this simple join operation, PQ took at least 10 minutes (I killed the Query Editor after 10
minutes' processing) to load the preview.
Here's how I did the join job: I first loaded tables into the workbook, then did the filtering for each table and at last, used the merge function to do the join based on a same field.
Did I do anything wrong here? Or is there any way to improve the load efficiency?
P.S. no custom SQL was used during the process. I was hoping the so called "Query Folding" can help speed the process, but it seems it didn't work here.
Thanks.
Regards,
QilongHi!
You should import the source tables
in Access. This will speed up the work of
PQ in several times. -
Partition pruning not working for partitioned table joins
Hi,
We are joining 4 partitioned tables on partition column & other key columns. And we are filtering the driving table on partition key. But explain plan is showing that all tables except the driving table are not partition pruning and scanning all partitions.Is there any limitation that filter condition cannot be dynamic?
Thanks a lot in advance.
Here are the details...
SELECT a.pay_prd_id,
a.a_id,
a.a_evnt_no
FROM b,
c,
a,
d
WHERE ( a.pay_prd_id = b.pay_prd_id ---partition range all
AND a.a_evnt_no = b.b_evnt_no
AND a.a_id = b.b_id
AND ( a.pay_prd_id = c.pay_prd_id---partition range all
AND a.a_evnt_no = c.c_evnt_no
AND a.a_id = c.c_id
AND ( a.pay_prd_id = d.pay_prd_id---partition range all
AND a.a_evnt_no = d.d_evnt_no
AND a.a_id = d.d_id
AND (a.pay_prd_id = ---partition range single
CASE '201202'
WHEN 'YYYYMM'
THEN (SELECT min(pay_prd_id)
FROM pay_prd
WHERE pay_prd_stat_cd = 2)
ELSE TO_NUMBER ('201202', '999999')
END
DDLs.
create table pay_prd
pay_prd_id number(6),
pay_prd_stat_cd integer,
pay_prd_stat_desc varchar2(20),
a_last_upd_dt DATE
insert into pay_prd
select 201202,2,'OPEN',sysdate from dual
union all
select 201201,1,'CLOSE',sysdate from dual
union all
select 201112,1,'CLOSE',sysdate from dual
union all
select 201111,1,'CLOSE',sysdate from dual
union all
select 201110,1,'CLOSE',sysdate from dual
union all
select 201109,1,'CLOSE',sysdate from dual
CREATE TABLE A
(PAY_PRD_ID NUMBER(6) NOT NULL,
A_ID NUMBER(9) NOT NULL,
A_EVNT_NO NUMBER(3) NOT NULL,
A_DAYS NUMBER(3),
A_LAST_UPD_DT DATE
PARTITION BY RANGE (PAY_PRD_ID)
INTERVAL( 1)
PARTITION A_0001 VALUES LESS THAN (201504)
ENABLE ROW MOVEMENT;
ALTER TABLE A ADD CONSTRAINT A_PK PRIMARY KEY (PAY_PRD_ID,A_ID,A_EVNT_NO) USING INDEX LOCAL;
insert into a
select 201202,1111,1,65,sysdate from dual
union all
select 201202,1111,2,75,sysdate from dual
union all
select 201202,1111,3,85,sysdate from dual
union all
select 201202,1111,4,95,sysdate from dual
CREATE TABLE B
(PAY_PRD_ID NUMBER(6) NOT NULL,
B_ID NUMBER(9) NOT NULL,
B_EVNT_NO NUMBER(3) NOT NULL,
B_DAYS NUMBER(3),
B_LAST_UPD_DT DATE
PARTITION BY RANGE (PAY_PRD_ID)
INTERVAL( 1)
PARTITION B_0001 VALUES LESS THAN (201504)
ENABLE ROW MOVEMENT;
ALTER TABLE B ADD CONSTRAINT B_PK PRIMARY KEY (PAY_PRD_ID,B_ID,B_EVNT_NO) USING INDEX LOCAL;
insert into b
select 201202,1111,1,15,sysdate from dual
union all
select 201202,1111,2,25,sysdate from dual
union all
select 201202,1111,3,35,sysdate from dual
union all
select 201202,1111,4,45,sysdate from dual
CREATE TABLE C
(PAY_PRD_ID NUMBER(6) NOT NULL,
C_ID NUMBER(9) NOT NULL,
C_EVNT_NO NUMBER(3) NOT NULL,
C_DAYS NUMBER(3),
C_LAST_UPD_DT DATE
PARTITION BY RANGE (PAY_PRD_ID)
INTERVAL( 1)
PARTITION C_0001 VALUES LESS THAN (201504)
ENABLE ROW MOVEMENT;
ALTER TABLE C ADD CONSTRAINT C_PK PRIMARY KEY (PAY_PRD_ID,C_ID,C_EVNT_NO) USING INDEX LOCAL;
insert into c
select 201202,1111,1,33,sysdate from dual
union all
select 201202,1111,2,44,sysdate from dual
union all
select 201202,1111,3,55,sysdate from dual
union all
select 201202,1111,4,66,sysdate from dual
CREATE TABLE D
(PAY_PRD_ID NUMBER(6) NOT NULL,
D_ID NUMBER(9) NOT NULL,
D_EVNT_NO NUMBER(3) NOT NULL,
D_DAYS NUMBER(3),
D_LAST_UPD_DT DATE
PARTITION BY RANGE (PAY_PRD_ID)
INTERVAL( 1)
PARTITION D_0001 VALUES LESS THAN (201504)
ENABLE ROW MOVEMENT;
ALTER TABLE D ADD CONSTRAINT D_PK PRIMARY KEY (PAY_PRD_ID,D_ID,D_EVNT_NO) USING INDEX LOCAL;
insert into c
select 201202,1111,1,33,sysdate from dual
union all
select 201202,1111,2,44,sysdate from dual
union all
select 201202,1111,3,55,sysdate from dual
union all
select 201202,1111,4,66,sysdate from dualBelow query generated from Business Objects and submitted to Database (the case statement is generated by BO). Cant we use Case/Subquery/Decode etc for the partitioned column? We are assuming that the case causing the issue to not to dynamic partition elimination on the other joined partitioned tables (TAB_B_RPT, TAB_C_RPT).
SELECT TAB_D_RPT.acvy_amt,
TAB_A_RPT.itnt_typ_desc,
TAB_A_RPT.ls_typ_desc,
TAB_A_RPT.evnt_no,
TAB_C_RPT.pay_prd_id,
TAB_B_RPT.id,
TAB_A_RPT.to_mdfy,
TAB_A_RPT.stat_desc
FROM TAB_D_RPT,
TAB_C_RPT fee_rpt,
TAB_C_RPT,
TAB_A_RPT,
TAB_B_RPT
WHERE (TAB_B_RPT.id = TAB_A_RPT.id)
AND ( TAB_A_RPT.pay_prd_id = TAB_D_RPT.pay_prd_id -- expecting Partition Range Single, but doing Partition Range ALL
AND TAB_A_RPT.evnt_no = TAB_D_RPT.evnt_no
AND TAB_A_RPT.id = TAB_D_RPT.id
AND ( TAB_A_RPT.pay_prd_id = TAB_C_RPT.pay_prd_id -- expecting Partition Range Single, but doing Partition Range ALL
AND TAB_A_RPT.evnt_no = TAB_C_RPT.evnt_no
AND TAB_A_RPT.id = TAB_C_RPT.id
AND ( TAB_A_RPT.pay_prd_id = fee_rpt.pay_prd_id -- expecting Partition Range Single
AND TAB_A_RPT.evnt_no = fee_rpt.evnt_no
AND TAB_A_RPT.id = fee_rpt.id
AND (TAB_A_RPT.rwnd_ind = 'N')
AND (TAB_A_RPT.pay_prd_id =
CASE '201202'
WHEN 'YYYYMM'
THEN (SELECT DISTINCT pay_prd.pay_prd_id
FROM pay_prd
WHERE pay_prd.stat_cd = 2)
ELSE TO_NUMBER ('201202', '999999')
END
And its explain plan is...
Plan
SELECT STATEMENT ALL_ROWS Cost: 79 K Bytes: 641 M Cardinality: 3 M
18 HASH JOIN Cost: 79 K Bytes: 641 M Cardinality: 3 M
3 PART JOIN FILTER CREATE SYS.:BF0000 Cost: 7 K Bytes: 72 M Cardinality: 3 M
2 PARTITION RANGE ALL Cost: 7 K Bytes: 72 M Cardinality: 3 M Partition #: 3 Partitions accessed #1 - #1048575
1 TABLE ACCESS FULL TABLE TAB_D_RPT Cost: 7 K Bytes: 72 M Cardinality: 3 M Partition #: 3 Partitions accessed #1 - #1048575
17 HASH JOIN Cost: 57 K Bytes: 182 M Cardinality: 874 K
14 PART JOIN FILTER CREATE SYS.:BF0001 Cost: 38 K Bytes: 87 M Cardinality: 914 K
13 HASH JOIN Cost: 38 K Bytes: 87 M Cardinality: 914 K
6 PART JOIN FILTER CREATE SYS.:BF0002 Cost: 8 K Bytes: 17 M Cardinality: 939 K
5 PARTITION RANGE ALL Cost: 8 K Bytes: 17 M Cardinality: 939 K Partition #: 9 Partitions accessed #1 - #1048575
4 TABLE ACCESS FULL TABLE TAB_C_RPT Cost: 8 K Bytes: 17 M Cardinality: 939 K Partition #: 9 Partitions accessed #1 - #1048575
12 HASH JOIN Cost: 24 K Bytes: 74 M Cardinality: 957 K
7 INDEX FAST FULL SCAN INDEX (UNIQUE) TAB_B_RPT_PK Cost: 675 Bytes: 10 M Cardinality: 941 K
11 PARTITION RANGE SINGLE Cost: 18 K Bytes: 65 M Cardinality: 970 K Partition #: 13 Partitions accessed #KEY(AP)
10 TABLE ACCESS FULL TABLE TAB_A_RPT Cost: 18 K Bytes: 65 M Cardinality: 970 K Partition #: 13 Partitions accessed #KEY(AP)
9 HASH UNIQUE Cost: 4 Bytes: 14 Cardinality: 2
8 TABLE ACCESS FULL TABLE PAY_PRD Cost: 3 Bytes: 14 Cardinality: 2
16 PARTITION RANGE JOIN-FILTER Cost: 8 K Bytes: 106 M Cardinality: 939 K Partition #: 17 Partitions accessed #:BF0001
15 TABLE ACCESS FULL TABLE TAB_C_RPT Cost: 8 K Bytes: 106 M Cardinality: 939 K Partition #: 17 Partitions accessed #:BF0001
Thanks Again.
Maybe you are looking for
-
Hi, I have an Access 2000 aplication which works fine with Acrobat 8.1.2 Pro -you select a product name -a PDF file is generated from this product's "Report" -and it's sent by mail It is a VBA code which stores: folder name, file name, printer name i
-
How do I know if my router is broken or has been hacked?
I have a WRT54G and it stopped working. It's wifi gives off a single but no one can connect to it, and neither can I. The only way I can get online is by directly hooking my computer into my modem. I've reset the factory defaults and made my domain n
-
Right click image in Bridge CS3 will not open images in Photoshop
Hi, New to Bridge here. I have a problem where I can double click an image (jpg, cr2, tiff, it does not matter what type) or right click + open or right click + open with Photoshop but Photoshop will not start. For jpgs, if I right click + open with
-
Connecting to mysql database using DBLOGIN
I am trying to connect to a mysql database through GG command interface and am unable to get the DBLOGIN to work correctly. Here is what I am getting:- mysql world -u root -p<password> (as user OS user mysql- works!) GGSCI (rac1) 5> DBLOGIN SOURCEDB
-
Condition type date should be same to the pricing procedure date
hi i have an problem the problem is that condition type date is not same to the pricing procedute date details of the problem 1. created a sales order the pricing date is 01.04.2006 2. when i go conditions in the sales order, as i go for details of t