Joystick use in a Labview VI not working after an installer is made.

I have a program that is supposed to take input from a joystick, and output a series of RS-485 signal to control devices. It works fine when I run it on the computer I am programming on, but when I build an installer and put it onto a computer without Labview (other than what the installer puts in), it does not take input from the joystick anymore. It also does not seem to be correctly reporting errors related to the joystick (it should throw an error when I choose an invalid joystick index, and with only 1 joystick, it should be index 0, but for some reason, I can put any number in there, and it is not erroring, despite the fact that no joystick exists at that index after it is queried. Is there some additional installer that I should include when building the installer?
I am currently using Labview 8.2.
Thanks

My appologies for the delay in replay, but with the holidays and all...
Anyway, the only DLLs I see in anything that is generated, are NISysInf.dll and customResource0009.dll. Not really sure why it has such a vague name, but that is what was there. As for the RS-485, it is via a USB to RS-485 unit which is installed and working with other RS-485 utilizing programs, including other labview programs, and to go with it I have bundled NI-VISA. Normally it would error if I put it on a comport or joystick that does not exist, but when I put it on a comport with a nonsensical name and joystick index 8, neither seems to complain, and they still do not work correctly with correct values. The part that does not make sense is that it works on the computer I am writing it on correctly, just when I install it from a built installer does it not work (which makes it a pain to debug when uninstall and restarting multiple times to test an attempt to fix it.
The other possible information that I can think of that might help was that this program may have been written in Labview 8.0.1, not the current labview 8.2 that I am using (I am editing some code somebody already wrote in our company, so I do not have all of the information about its development. I'm still rather new to Labview, so I'm not sure how to check if such is so, and if that might be causing the errors.
So to summarize, what would cause no errors to be thrown, when it obviously is not detecting the com port or joystick correctly, and to work only on the development computer fine and not on a fresh comptuer.

Similar Messages

Ciscowork 3.2.1 daemon manager is not working after patch installation

Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
Please suggest.
With Regards,
neena

During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
Following message will be seen in /log/syslog.log
Daemon manager anonymous user has not been set up: 00000775
To solve the issue, run resetcasuser.exe located under /setup.support to recreate the settings.
Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
Additionally you can try to make casuser a member of adiministrators group.
-Thanks

Ciscowork3.2.1 daemon manager is not working after patch installation

Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
I reset the casuser password and restarted the service but still no luck....
Please suggest.
With Regards,
neena

Neena,
Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out. The only thing checked should be "Password never expires". Change anything required and reset casuser.

Phone not working after infinity installation

I have just moved my phone and broadband from Sky to Bt and the engineer called this morning to complete the installation. I have 2 phone sockets. When I had broadband originally installed it was before the days of filters so it required a BT engineer visit. As my computer was upstairs the engineer 'back wired' the sockets (apologies if I have the terminology wrong) so the adsl faceplate was fitted to the upstairs wired extension. Today, the Openreach engineer was initially puzzled but said he would be able to install the Infinity faceplate on the upstairs extension as originally fitted. He checked the line was ok, checked the broadband connection and put the faceplate back on the 2 sockets. After he left I tried to make a call via the downstairs socket without success and I assumed that the phone line had not yet been changed back to BT. This afternoon I received an email from BT advising that my phone was now active but the downstairs socket will not work. I am able to make and receive calls on the upstairs extension. I have just spent 40 minutes on the phone to BT, explaining the problem to 4 different people. Each BT employee advised that it would cost £130 for an engineer to revisit my house to correct the fault that they had somehow caused! To say I'm frustrated is an understatement. Has anyone any suggestions how I can resolve the problem. All 4 BT employees did not really understand the problem. I would appreciate any help.
Solved!
Go to Solution.

You cannot use a phone connection for broadband when on Infinity. The only connection that can be used is that which comes from the home hub 3, which is near the Openreach modem.
You have to use wireless, run an Ethernet cable, or use Powerline adapters.
You phone should work if it is plugged into the botton socket of the new Infinity master socket.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Some Java applets do not work after silent installation, solved by toggling "Enable Java content in the browser" - Why?

We have about 1,800 workstations running Windows 7 (both 32-bit and 64-bit) running various versions of the Java JRE from 6 update 32 through 7 update 51. Most are on 6 update 45. We would like to standardize on Java 7 update 51 (32-bit) and get everyone updated to that version for security reasons.
For the past two weeks, we have been having trouble with our installation pre-pilot. What we are seeing is that our procedure successfully closes any open Internet Explorer windows and Java-related processes, uninstalls all old versions of the Java JRE, and then claims to have successfully installed Java 7 update 51. The Java Control panel works. We can even take Internet Explorer to Verify Java Version or Java Tester - What Version of Java Are You Running? and confirm that the Java applets on those sites are loading (though the latter only works after adding the site to the exceptions site list); however, when testers try to access our Kronos Workforce Central 6.3.10 system, the Java applets used by that system do not load.
We have tried the following things, none of which worked:
Clear Internet Explorer browser cache and cookies.
Clear the local Java cache.
Reboot the computer.
Reset Internet Explorer settings, including personal settings.
The one thing which does work is going into the Java Control Panel, going to the Security tab, unchecking "Enable Java content in the browser", pressing Apply, pressing OK on the pop-up window, checking the "Enable Java content in the browser" box again, pressing OK, pressing OK on the pop-up window, and then restarting Internet Explorer. It is only after this point that all Java applets, including the ones used by Kronos Workforce Central 6.3.10, work.
What I need to know is how I can automate the procedure of reinitializing the "Enable Java content in the browser" checkbox after installation or am I doing something wrong or missing a step in the automated installation that is causing this to happen?
We are using Microsoft SCCM 2007 R3 to accomplish this upgrade, and everything is being run on the client machine using the SYSTEM account. First, the PowerShell script "javaclean.ps1" is run, with part of the command-line process changing the PowerShell script execution policy to Bypass. This script handles the closing of Java-dependent applications and Java processes and uninstalls old Java versions.
javaclean.ps1:
#Find all Java products excluding the auto updater which actually gets uninstalled when the main install is removed.
write-host "Searching for all installed Java versions" -ForegroundColor Yellow
[array]$javas=Get-WmiObject -query "select * from win32_Product where (Name like 'Java %' or Name like 'Java(TM)%' or Name like 'J2SE%') and Name <> 'Java Auto Updater'"
if ($javas.count -gt 0)
    write-host "Java is already Installed" -ForegroundColor Yellow
    #Get all the Java processes and kill them. If java is running and the processes aren't killed then this script will invoke a sudden reboot.
    [array]$processes=Get-Process -Name "Java*" #-erroraction silentlycontinue
    $processes += Get-Process -Name "iexplore" #-erroraction silentlycontinue
    $processes += Get-Process -Name "firefox" #-erroraction silentlycontinue
    $processes += Get-Process -Name "chrome" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jqs" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jusched" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jp2launcher" #-erroraction silentlycontinue
    if ($processes.Count -gt 0)
        foreach ($myprocess in $processes)
            $myprocess.kill()
    #Loop through the installed Java products.
    foreach($java in $javas){
        write-host "Uninstalling "$java.name -ForegroundColor Yellow
        $java.Uninstall()
After this script is complete, SCCM calls a the VBS script "install.vbs" to perform the actual installation of Java JRE 7 update 51.
install.vbs
'* Script: Install JRE 7 routine
'* Date:   3/14/14
'* Author: [REDACTED]
'* Rev:    1.0
'* Notes:
'/// Common
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objWshShell = CreateObject("WScript.Shell")
' Get system architecture
Dim colSys : Set colSys = GetObject("WinMGMTS://").ExecQuery("SELECT AddressWidth FROM Win32_Processor",, 48)
Dim objSys
For Each objSys In colSys
    If objSys.AddressWidth = 64 Then bolIs64Bit = True
Next
' Get operating system
Dim colOS : Set colOS = GetObject("WinMGMTS://").ExecQuery ("Select * from Win32_OperatingSystem",,48)
Dim objOS
For Each objOS In colOS
    If Left(objOS.caption, 20) = "Microsoft Windows 8 " Then
        bolIsWin8 = True
        WScript.Echo "win8"
    End If
    If Left(objOS.caption, 22) = "Microsoft Windows 8.1 " Then
        bolIsWin81 = True
        WScript.Echo "win81"
    End    If
Next
' Set 32 bit program files directory
If bolIs64Bit = True Then
    strPFILES = "Program Files (x86)"
    strSYSDIR = "SysWOW64"
    Else strPFILES = "Program Files"
    strSYSDIR = "System32"
End If
' Set windows directory
strWIN = objWshShell.ExpandEnvironmentStrings("%windir%")
' Set the current directory
strCurrentDir = objFSO.GetParentFolderName(Wscript.ScriptFullName)
' Set computer name
strCompName = objWshShell.ExpandEnvironmentStrings("%computername%")
'/// Main script
    '/// Install via .msi & capture exit code
    'intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\package.msi""" & " TRANSFORMS=""" & strCurrentDir & _
    '    "\transform.mst"" ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
    'wscript.quit(intExitCode)
    '****RUN COMMANDS HERE****
    ' Create folder structure if it doesn't exist already
    strFullPath = "c:\Windows\Sun\Java\Deployment" '
    ' How many levels are there in the path?
    nLevel = 0
    strParentPath = strFullPath
    Do Until strParentPath = ""
        strParentPath = objFSO.GetParentFolderName(strParentPath)
        nLevel = nLevel + 1
    Loop
    For iLevel = 1 To nLevel
        ' Figure out path for directory at level iLevel
        strParentPath = strFullPath
        For j = 1 To nLevel - iLevel
            strParentPath = objFSO.GetParentFolderName(strParentPath)
          Next
    ' Does this directory exist? If not, create it.
        If objFSO.FolderExists(strParentPath) = False Then
            Set newFolder = objFSO.CreateFolder(strParentPath)
        End If
    Next
    ' Kill running processes
    objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True
    objWshShell.Run "taskkill /F /IM firefox.exe", 8, True
    objWshShell.Run "taskkill /F /IM chrome.exe", 8, True
    objWshShell.Run "taskkill /F /IM javaw.exe", 8, True
    objWshShell.Run "taskkill /F /IM java.exe", 8, True
    objWshShell.Run "taskkill /F /IM jqs.exe", 8, True
    objWshShell.Run "taskkill /F /IM jusched.exe", 8, True
    ' Copy deployment files
    objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True
    objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True
    ' Disable UAC
'    If bolIsWin8 Or bolIsWin81 = True Then
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 0 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 0 /f", 8, True
'    End If
    ' Install application
    intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\jre1.7.0_51.msi"" IEXPLORER=1 AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 WEB_JAVA=1 ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
    ' Enable UAC
'    If bolIsWin8 Or bolIsWin81 = True Then
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 1 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 /f", 8, True
'    End If
    wscript.quit(intExitCode)
    '/// Install via .exe on network
    'objWshShell.Run """" & strCurrentDir & "\Setup.exe"" -s -sms -f1""" & strCurrentDir & _
    '    "\setup.iss"" -f2""" & strWIN & "\Temp\Install-app.txt""", 8, True
    ' Need to turn off the open file security warning first
    Set objEnv = objWshShell.Environment("PROCESS")
    objEnv("SEE_MASK_NOZONECHECKS") = 1
'    intExitCode = objWshShell.Run("""" & strCurrentDir & "\jre-7u45-windows-i586.exe"" /s /v""/norestart " & _
'        "TRANSFORMS=""" & strCurrentDir & "\Tribe-jre7.mst""""", 8, True)
'    WScript.Quit(intExitCode)
    '****RUN COMMANDS HERE****
    ' Then turn it back on
    objEnv.Remove("SEE_MASK_NOZONECHECKS")
'/// Additional functions
Help on this issue would be much appreciated!

It turns out that this is actually a problem with Kronos Workforce Central. We had the "site.java.plugin.CLSID.familyVersion" setting in that application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the Java CLSID for Java 6. After updating this value to "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" (the Java universal CLSID), this problem did not occur upon the automatic upgrade of Java.
We have both Java 6 and Java 7 in our environment, and did during our Kronos implementation, so I don't know why we were using the Java 6 CLSID in the first place.
Case closed!

Satellite L450D Webcam not working after new installation without recovery

Hi there,
as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
No driver installation, bios update and re-installation worked to get this part to work.
Did anyone of you know this problem and have a fix for me?
Thanks in advance.
Greetings Saphire
P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

Hi
I dont think that this needs to be fixed because I dont think its hardware related issue.
I think there is something wrong with the software on your notebook.
I mean everything worked perfectly until virus has damage the OS. Right?
You said this:
>I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
I really wonder why you could not get this working using Recovery disk.
So possibly this is the key to this issue
On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
Also webcam driver v 1.1.1.4 is available there
I think the OS is responsible for your issue possibly some patches are applied or similar

Microsoft Word 2008 does not work after lion installation

After I installed Lion in my MacBook Pro, Microsoft word 2008 failed to work properly. Each time I try to quit word an error message appears and word closes and reloads automatically. The only way I can now really quite word is by the 'Force quit' option (in the apple menu). Word was working properly with Snow Leopard, so no idea what happened there... Any hint? Thanks

Ok, did exactly what you said... To 'make word crash' I only had to open it and then try to 'quit' it, in crashes 100% of the time...
1/3/12 11:43:29.066 AM com.apple.launchd.peruser.501: ([0x0-0x99099].com.microsoft.Word[970]) Exited: Killed: 9
1/3/12 11:43:31.983 AM Microsoft Error Reporting: CFURLCreateWithString was passed this invalid URL string: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
1/3/12 11:43:31.984 AM Microsoft Error Reporting: CFURLCreateWithBytes was passed these invalid URLBytes: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
1/3/12 11:43:31.984 AM [0x0-0x99099].com.microsoft.Word: 2012-01-03 11:43:31.983 Microsoft Error Reporting[977:7703] CFURLCreateWithString was passed this invalid URL string: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
1/3/12 11:43:31.984 AM [0x0-0x99099].com.microsoft.Word: 2012-01-03 11:43:31.983 Microsoft Error Reporting[977:7703] CFURLCreateWithBytes was passed these invalid URLBytes: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
I hope you can make some sense of all that!
Thanks!

LOV filter - Auto Submit not working after the value is made to VS.filter

JDeveloper 11.1.1.4.0
I have cascading LOV filters for a table with fields id, deptid, projectName. The filters are for deptid and projectName. When I select a deptid, the projectNames belonging to that deptid should be populated. I have set Auto submit for deptid filter and partial trigger for project Name. So if I select a deptid and when I navigate to Project Name filter I get the list of project Names in the Project LOV filter.This worked fine as long as I didnt change the value for LOV to Vs.filtercriteria.deptid. Once I changed it the LOV filter for Project Names only got refreshed once I hit ENTER key after changing the value of Deptid. But I have to keep the value for LOV to Vs.filtercriteria.deptid. Other wise the records in the table after applying the filter values didnt function properly. I dont know whether the AutoSubmit does not work when the value is changed to Vs.filtercriteria.deptid

duplicate post.
Frank

T61 sound not working after re-installation

Hi,
I am re-installing Windows XP Pro SP2 on several laptops.
I have an issue with some T61.
The installation of the driver (found on Lenovo website) is successful.
Windows displays the sound icon, I can open it and change the volume but I can't hear any sound.
I am sure it was working fine before re-installation.
I have tried two ways:
- installing KB888111, then sound driver
- installing SP3, then sound driver
But none is working.
Do you have an idea of anything I could have missed?
Where can I get previous versions of the drivers?
Thank you.
Solved!
Go to Solution.

Solved.
The computer was on mute after re-installation and the button above the keyboard wasn't working properly (I had to press really hard).
Thank you.

Execute Package Task Not Working After New Installation VS2012

After installing VS2012 Update 4, the execute package task runs the child package out of order.
The same version of VS is being used as the old computer (same everything, SQL 2012, OS...). The solution works correctly on machines where VS2012 was installed prior to July 2014. I've downloaded the BIDS, SSDT.
Anyone else have the same problem? I have yet to find anywhere on the internet where someone has reported the same issue. It has happened on multiple computers since August 2014.

How to reproduce?
It is not very likely, but did you try searching MS Connect for this issue?
Arthur
MyBlog
Twitter

Satellite M30: FN keys not working after IE7 installation

I installed IE7 and noticed that the fn keys no longer work. (Satellite M30)
I am not sure if that was the catalyst because I'm not sure how long the problem has existed for.
The only ones I use often are FN+f6 and +f7.
I really need to be able to adjust the brightness of the screen. Any and all help would be much appreciated.
Thanks.

Hi
First of all the display brightens can be changed also in the Toshiba Power Saver utility.
But its very strange that after the IE7 update the FN keys stopped working. I have installed the IE7 on my notebook and the FN keys still work fine.
So maybe its a simply something wring in the registry. Who knows ?:|
I would recommend reinstalling the Common Modules.
Maybe it helps!

ISight not working after Leopard installation - 1st Generation MacBook

My iSight is no longer working on my 1G MacBook after Leopard clean installation. Does anyone have this problem?

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

Satellite Pro A200: Card Reader does not work after XP installation

Hi...
I have removed Windows Vista from my Satellite Pro A200 in favour of XP Home.
I'm much happier with the machine now but am unable to get any response from the Card Reader. There's no mention of it in the User's Manual that came with the machine.
I can't find any reference to it in the Control Panel's Hardware Manager and nothing changes in there when I insert an SD memory card.
I didn't have cause to try the reader prior to removing Vista, so I don't know if it ever worked... although I imagine that it did.
Running a search for a driver in the download section didn't have any success and this forum has no direct answers.
Does anyone have any idea what I need to do to get this to work?
Popa Mintin.

Hi
I dont see any serious reasons why your card reader shouldnt run/function with installed Windows XP.
What you need is the right driver.
The Toshiba driver page provides all Win XP drivers and there is also an XP driver for the multi card reader.
You need a Texas Instruments Flash Media Driver. This is a driver for your Bridge Media Slot.
This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
Cheers

Get Support link does not work after SPS13 installation

Good evening,
we have patched our system from NW7 SPS10 to NW7 SPS13.
We have problem with our portal: on home page Get Support Link doesn't
work! When user click on Get Support link doesn't happen, only web page
change
from
https://sitemane/irj/portal/
to
https://sitename/irj/servlet/prt/portal/prttarget/uidpwlogon/prteventname/undefined/prtroot/com.sap.portal.navigation.portallauncher.default?gotoHelpPage=
Thanks for all
Gerardo

Hi Gerardo,
Can you please check if this link works
https://sitename/irj/servlet/prt/portal/prttarget/uidpwlogon/prteventname/gotoHelpPage/prtroot/com.sap.portal.navigation.portallauncher.default
If this works then you need to check the Logon.Par as the component for Get Support resides inside the Logon Par only,
Thanks
Pankaj

Startxfce4 does not work after xfce4 installation [solved]

When I
# startxfce4
I get no such file
When I
# /opt/xfce4/bin/startxfce4
I get a lot of "not found" xfce4 modules (i.e. xfce4-session)
When I put "exec startxfce4" in /.xinitrc, same thing ahppens
ideas?

Try logging out and logging back in. Xfce is going to set some profile stuff for you that it needs.

Joystick use in a Labview VI not working after an installer is made.

Similar Messages

Maybe you are looking for