JPDA - Port not listening when running app on Unix box

Hi,
I am launching my app on JDK 1.3.1_05 with the following JVM params:
-Xdebug -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=1044,suspe
nd=y
however when I run a "netstat -a | grep 1044" I get nothing.
Why would the JVM not open the port for listening?
Can't think what I am doing wrong.
Thanks for any help,
--Ben

Which operating system is this? Did you try to telnet to port 1044 to see if it connects (if it connects it means that something is listening on 1044).

Similar Messages

SAP Gateway- environmental variables not loaded when running brconnect

Hello
i have installed the Sap gateway on MSCS
and the RFC check in sm59 is successful,
However when i run a job in db13 it fails with "brconnect is not recognized as ......... "
<sid>adm has all environmental variables set correctly
SAPService<SID> has them too
when i run brconnect on OS level it works fine with <sid>adm and SAPService<SID>
however if create a brconnect.cmd file where i specify the command as
SET ORACLE_SID= ....
SET SAPDATA_HOME=....
C:\windows\sapcluster\brconnect.exe ...........
and run it in sm69 it works fine
Any ideas how to solve this, seems the variables are not taken when running sapxpg
, i don't want to edit the SDBAC for every command
P.S
set from sm69 returns only the system wide variables, however i have the two systems on this host, and can not make the environmental variables for ORACLE_SID and SAPDATA_HOME system wide as this will cause problem with the other sap system
Edited by: Yavor Markov on Apr 12, 2010 6:07 PM

Hi Markov,
Can you tell us with which user id you have installed SAP as well as check the sap services are running with which user id, if it is not <sid>adm then you have to check the environment variables of that user.
Also you can try adding c:\windows\sapcluster in PATH environment variable.
Regards,
Kishore Soma

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

RDP Port not Listen in Windows Server 2008 Std With Sp2

Hi all
I have Windows 2008 Server Std with SP2 Domain Member Server.. From Last week On-wards , am not able to take remote desktop control .. But i can able to Ping my Server from network .. I check remote settings on that server.. It
is enabled.. and also remote desktop service(Terminal service) was started successfully.. I checked my network firewall for port(3389) blocking.. But there is no much block in my network firewall.. i also disabled windows firewall in my server.. But
still i couldn't able to take RDP.. I also checked my Domain GPO and Local GPO settings for RDP Block.. But there is no such settings enabled. I did following Troubleshooting Steps, but still the problem persist
1. Telnet serverip 3389
Result : Could not open connection to the host, on port 3389:
2. netstat -n -a -o | find "3389" (i run this command in my RDP Problem server)
Result : nothing displayed (3389 port not listed )
3. i again & again restarted Terminal service and the server, but still problem exists
4.i changed the RDP port no and restarted the service as well as the server , but still problem exist
5. I checked all RDP related Registry settings , everything is perfect
Please help me to solve this issue
I need your valuable reply urgently
Thanks in advance

Hi Mohamed,
You mention, that you the server is not listening to port 3389 when you run netstat. This is the reason why telnet and RDP connectivity fails in a first place. You also said that you changed the RDP port number. What was is before the change, and to what
did you change it to?
Please verify if the Terminal Service is listening to 3389 (0xd3d) with following command:
reg query "HKLM\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp" /v PortNumber
Output:
PortNumber REG_DWORD 0xd3d
Try to enable the Operational log for TerminalServices-RemoteConnectionManager events in Event Viewer:
Open Event Viewer
Navigate to Applications and Service Logs\Microsoft\Windows\TerminalServices-RemoteConnectionManager
Select the Operational log and chose Enable Log
from the Action or context menu
Restart Terminal Services service
Then consult this event log and the System and Application logs for any related errors and warning. It might be helpful to post relevant event log entries here.
Additional information and solutions about Terminal Server Listener events and errors can be found here:
http://technet.microsoft.com/en-us/library/cc727385(v=ws.10).aspx
Regards,
Johann
// Johann

VPN ports not listening on WRVS4400N

Hi,
I have a brand new WRVS4400N running Firmware Version: V1.1.03-ETSI and I cannot seem to get the client VPN workign at all.
Config :
No Static IPSec tunnels
DOS Protection : OFF
FireWall : OFF
Block WAN Request: DISABLE
Remote Mgmt : ON
HTTPS : ON
I have used QuickVPN 1.2.11 on both Vista and XP and still no luck. QuickVPNPlus reports "a connection with the server cannot be established" when using ports 443 OR 60443. I have even tried this from behing many routers in case I was running into a NAT-T issue.Then I went back to basics and tried to telnet which is showing me that neitherr port 443 or 60443 are listening.!!
Does anyone have any pointers to resolving this issue. ?
I have spend hours on hold for support and trying to debug what I thought was a client side issue and all the time it appears as if the device is not listening.
Any help would be greatly appreciated.
Regards
Peggo

Hi,
Thanks for the prompt reply.
The router has been tested with the fireall both ON and OFF.
There are two VPN accounts and both are marked as active.
The router does have a public on the WAN interface in the 194.125 range. The router is connected to a DSL ISP over PPPoE and all connections over the link are working just not 443 OR 60443 to the router IP.
The VPN Log (below) shows nothing of use (to me anyway) I cannot see the connections come through in the log. But I am sure remote connections are working as I'm logged into the device remotely on port 8080.
Many Thanks
Peggo
VPN_LOG>>>>>>>
Dec 31 16:00:59 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)
Dec 31 16:00:59 - [VPN Log]: @(#) built on Sep 3 2007:16:44:42:
Dec 31 16:00:59 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on
Dec 31 16:00:59 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1
Dec 31 16:00:59 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)
Dec 31 16:00:59 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)
Dec 31 16:00:59 - [VPN Log]: starting up 1 cryptographic helpers
Dec 31 16:00:59 - [VPN Log]: started helper pid=731 (fd:5)
Dec 31 16:00:59 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star
Dec 31 16:00:59 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'
Dec 31 16:01:00 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'
Dec 31 16:01:00 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'
Dec 31 16:01:00 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'
Dec 31 16:01:00 - [VPN Log]: Warning: empty directory
Oct 29 15:45:39 - [VPN Log]: shutting down
Oct 29 15:45:42 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)
Oct 29 15:45:42 - [VPN Log]: @(#) built on Sep 3 2007:16:44:42:
Oct 29 15:45:42 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on
Oct 29 15:45:42 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1
Oct 29 15:45:42 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)
Oct 29 15:45:42 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)
Oct 29 15:45:42 - [VPN Log]: starting up 1 cryptographic helpers
Oct 29 15:45:42 - [VPN Log]: started helper pid=1204 (fd:5)
Oct 29 15:45:42 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star
Oct 29 15:45:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'
Oct 29 15:45:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'
Oct 29 15:45:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'
Oct 29 15:45:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'
Oct 29 15:45:42 - [VPN Log]: Warning: empty directory
Oct 29 16:05:49 - [VPN Log]: shutting down
Oct 29 16:05:51 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)
Oct 29 16:05:51 - [VPN Log]: @(#) built on Sep 3 2007:16:44:42:
Oct 29 16:05:51 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on
Oct 29 16:05:51 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1
Oct 29 16:05:51 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)
Oct 29 16:05:51 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)
Oct 29 16:05:51 - [VPN Log]: starting up 1 cryptographic helpers
Oct 29 16:05:51 - [VPN Log]: started helper pid=1785 (fd:5)
Oct 29 16:05:51 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star
Oct 29 16:05:51 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'
Oct 29 16:05:51 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'
Oct 29 16:05:52 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'
Oct 29 16:05:52 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'
Oct 29 16:05:52 - [VPN Log]: Warning: empty directory
Oct 29 16:16:52 - [VPN Log]: shutting down
Oct 29 16:16:54 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)
Oct 29 16:16:54 - [VPN Log]: @(#) built on Sep 3 2007:16:44:42:
Oct 29 16:16:54 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on
Oct 29 16:16:54 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1
Oct 29 16:16:54 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)
Oct 29 16:16:54 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)
Oct 29 16:16:54 - [VPN Log]: starting up 1 cryptographic helpers
Oct 29 16:16:54 - [VPN Log]: started helper pid=2293 (fd:5)
Oct 29 16:16:54 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star
Oct 29 16:16:54 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'
Oct 29 16:16:54 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'
Oct 29 16:16:54 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'
Oct 29 16:16:54 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'
Oct 29 16:16:54 - [VPN Log]: Warning: empty directory

Sqlora11.dll not found when running Pro*C application on 11g server

Hello,
Here is my environment:
Workstation: Windows XP (32bit) with Oracle Client 11g 32bit
Server: Windows 2003 server 64bit with Oracle 11g 64bit
I have a Pro*C program that I have been able to pre-compiled, compiled and linked on my workstation using Mingw/gcc compiler and standard include files (sdtio.h...) from MS Visual C++ 2005 Express Edition.
Precompilation: E:\app\oracle\product\11.1.0\client_1\BIN\proc.exe iname=Fill_Translated.pc oname=Fill_Translated.c userid=xxx/yyy@my11gDB code=ansi_c parse=full mode=oracle dynamic=oracle lines=yes sqlcheck=semantics errors=yes sys_include="C:\Program Files\Microsoft Visual Studio 8\VC\include" include=("E:\app\oracle\product\11.1.0\client_1\precomp\public","E:\app\oracle\product\11.1.0\client_1\oci\include")
Compilation: c:\mingw\bin\gcc.exe -c Fill_Translated.c -o Fill_Translated.o -Wall -I E:\app\oracle\product\11.1.0\client_1\precomp\public -I E:\app\oracle\product\11.1.0\client_1\oci\include
Link: c:\mingw\bin\gcc.exe -o Fill_Translated.exe Fill_Translated.o -L E:\app\oracle\product\11.1.0\client_1\precomp\LIB\ -lorasql11
The result is an executable file that gets connected to an 11g database hosted on a w2003 64-bit server, opens a table with blob fields and expands the blob content into a target table (one blob source record generates thousands of target records). Everything works fine when running from my workstation.
For some reasons, this executable file must run on the O11g server itself. So I copied and pasted the executable file on the server and tried to run it. I thought it would work...
But I get the following error message in a popup window: This application has failed to start because orasql11.dll was not found. Re-installing the application may fix this problem.
At this point, I do not know anymore what to do to solve this problem !
Does it come from the fact that the complete build have been done on a Windows 32bit platform and the server is a 64-bit platform ?
Do I have to install a O11g 64bit client on my server to make it work ?
Do I have to rebuild everything from the server, meaning that I must install a kind of development environment on my server (Mingw/gcc and so on) ?
Is there something to change in the registry of the server or in the path environment variable so that this dll is found ?
Any others ideas ??
Thank you for your answers.

Actually, I do not have any O11g client installed on my Oracle server. But the DLL exists in my $ORACLE_HOME/lib on my server, more precisely in E:\app\dev_ora\product\11.1.0\db_1\BIN.
As I built my executable file on a win32 platform with O11g client 32bit installed, I was wondering if the same executable file copied onto the server was not trying to find the relevant 32 bit library on my win64 platform, which of course does not exists as I have only a 64bit version of this library !! Would-it be the cause of the problem ?
Does an O11g 32bit client installation on my Oracle 11g 64bit server would solve the problem ? Any inconvenient to have on the same server both an O11g 64bit server and an O11g 32bit client if it appears to be the solution ?

UAC box not accessible when "modern" app is open.

Problem:
Modern app and UAC don't work well together.UAC box is impossible to use (to answer Yes/No on security warning)
To reproduce:
Go to User Account Control Setting and lower the setting to second from bottom ( to not dim the screen).
Download an EXE program and start the installation.While it installs, open and use a modern app like OneNote.While you're using OneNote, the installation on background opens a UAC box to ask for a confirmation.However,the UAC box is not visible.At this point
it's impossible to use OneNote app but you can use all other things on the PC.When you minimize OneNote, the UAC box is not visible.Click anywhere on OneNote app and you hear a sound (as if it's telling you that you have an active pending box that you have
to close before using that window) .When you maximize the OneNote app the UAC box becomes visible for 1 second then disappears again.The only way to solve this is to right click on OneNote icon on taskbar and Close it.The UAC is still invisible ! You
have to run the program installation again.

We tried request scope but that caused other problems. We aren't really looking for the constructor to be called with every view, just when a new instance of the application is invoked (by clicking a link in an email). Right now, if the user opens a new browser from the start menu and pastes our link into it everything works fine. I think our problem is in IE and Windows. Perhaps we'll try request scope again and see if the problems that causes are easier to solve than this.
Thanks again for your help and your fast replies,
Dave

Is it normal for the 4s to get kinda hot when running apps/ video recording?

Any know? Hope it's not a hardware issue.

It's normal to get pretty warm when running hard, i.e. video or some apps. If it gets too hot to touch, that's not normal.

Flash not appearing when run locally

Hi, I am having a weird issue with a user. He cannot display a swf when run locally on his machine in a browser. If he goes online he sees the movies fine. To test I sent him a movie with just an image in it and published to html. I double click the html page and can see the movie and image fine. He does the same on his machine and gets nothing just a blank page. Problem is we have an java app that runs local (using port 8000) and opens separate movies in new windows that he can never see.
Thanks in advance,
P.

It sounds like you are having a file trust problem. To resolve that, you have to trust this file from the Flash Global Settings Manager.
Go there: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
Add a path to the local file, restart browser and try again.

Included subview not displaying when run, only in editor

Hallo -- I have a page called home.jsp that contains a subview.
home.jsp looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ page language="java" contentType="text/html; charset=iso-8859-1" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<h:panelGrid width="100%" columns="1">
     <h:panelGroup>
          <h:outputText value="Hello?"/>
     </h:panelGroup>
     <h:panelGroup>
          <h:panelGrid width="100%" columns="2">
               <h:panelGroup>
                    <f:subview id="navigationPane">
                         <jsp:include page="subview/navigationPane.jspf" flush="true" />
                    </f:subview>
               </h:panelGroup>
               <h:panelGroup>
                    <h:outputText value="Hello-o-o-o...?"/>
               </h:panelGroup>
          </h:panelGrid>
     </h:panelGroup>
     <h:panelGroup>
          <h:outputText value="Where's my subview?"/>
     </h:panelGroup>
</h:panelGrid>
</body>
</html>
</f:view>
[/code:1:ccbd93ceb2]
And the file in the subview, named [b:ccbd93ceb2]navigationPane.jspf[/b:ccbd93ceb2] in the subfolder [b:ccbd93ceb2]/subview[/b:ccbd93ceb2] looks like this:
[code:1:ccbd93ceb2]<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<h:panelGrid width="20%" columns="1" id="navigationPane">
     <f:facet name="header">
          <h:outputText value="Navigation Pane"/>
     </f:facet>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoHome" action="gotoHome" immediate="true" style="text-align: center">
                    <h:outputText value="home"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByCustomer" action="viewByCustomer" immediate="true" style="text-align: center">
                    <h:outputText value="view by customer"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByJob" action="viewByJob" immediate="true" style="text-align: center">
                    <h:outputText value="view by job"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form id="quickSearchBeanForm">
               <h:panelGrid columns="3">
                    <h:outputText value="Search By Option:"/>
                    <h:panelGroup>
                         <h:selectOneMenu id="quickSearchBean_searchByOption" value="#{navigationPaneBean.quickSearchBean.searchByOption}">
                              <f:selectItems value="#{navigationPaneBean.quickSearchBean.searchByOptions}"/>
                         </h:selectOneMenu>
                    </h:panelGroup>
                    <h:message for="quickSearchBean_searchByOption"/>
                    <h:outputText value="Search For:"/>
                    <h:inputText id="quickSearchBean_searchFor" value="#{navigationPaneBean.quickSearchBean.searchFor}"/>
                    <h:message for="quickSearchBean_searchFor"/>
               </h:panelGrid>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoAdmin" action="gotoAdmin" immediate="true" style="text-align: center">
                    <h:outputText value="admin"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <f:facet name="footer">
          <h:form>
               <h:commandLink id="logout" action="logout" immediate="true" style="text-align: right">
                    <h:outputText value="logout" style="text-align: right"/>
               </h:commandLink>
          </h:form>
     </f:facet>
</h:panelGrid>
[/code:1:ccbd93ceb2]
Just to be really clear, here is the dierctory structure for the relevant files:
[code:1:ccbd93ceb2]/web
|
|
|--/pages
|   |
|   |
|   |--/app
|   |   |
|   |   |
|   |   |--/subview
|   |   |   |
|   |   |   |--navigationPane.jspf
|   |   |
|   |   |
|   |   |--home.jsp
|   |
|   |
|   ...
|
...[/code:1:ccbd93ceb2]
My problem is that the subview will not display when I run the web app. In the design view I can see it just fine, but when I browse to home.jsp when running, all I get is this (from view source):
[code:1:ccbd93ceb2]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<table width="100%"><tbody><tr><td>Hello?</td></tr>
<tr><td><table width="100%"><tbody><tr><td></td><td>Hello-o-o-o...?</td></tr>
</tbody></table></td></tr>
<tr><td>Where's my subview?</td></tr>
</tbody></table>
</body>
</html>
<script type="text/javascript">

</script>
[/code:1:ccbd93ceb2]
Does anyone have any idea why this might not be working?
I'm really stumped!
Cheers,
   doug.

http://forum.java.sun.com/thread.jspa?messageID=3413354&#3413354

Error when running app world

from OS 5.0.0.419, i reinstalled 4.7.1.61 and now i keep getting this error when i try running app world
Error starting net_rim_bb_appworld: Class 'net.rim.device.api.ui.toolbar.toolbarbuttonfield' not found.
does anyone have any idea about this or how to resolve this?
thanks
www.whatsgoodblog.com
What's Good is your one stop site reviews about everything.
http://www.whatsgoodblog.com/featured/how-to-install-beta-os-or-other-carrier-os-on-blackberry-with-desktop-manager-for-mac/

Problem solved.... Somehow it had removed a line in the server.xml file for the embedded OC4J (the line which adds BC4J/lib).

Web dynpro application not available when running iview wizard

When I run the iview wizard to create a web dynpro iview I find the folder local/<MyProjectName.
But when opening myProjectName folder the Application is missing, so I cannot create the iview.
When running the web dynpro Content Administrator I find the application in the ProjectName folder, but when I try to run it I get the exception:
com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyTestApplication' in repository.
What could be the issue?
B.r
Olof

Hi Siva,
I tried this but it still doesn't work for me:
I get this error
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot open repository for application 'MyApplication'.
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:316)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:244)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:217)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:626)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:144)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyApplication' in repository.
     at com.sap.tc.webdynpro.serverimpl.core.repository.AbstractServerRepository.getApplicationInternal(AbstractServerRepository.java:167)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:307)
     ... 22 more
Edited by: Olof Trönnberg on Aug 20, 2009 12:42 PM

Sorting array not working when run as a job

I have a Powershell script that reads data from a log file, extracts a username and adds it to an array. I then sort the array to remove duplicates and export the data to a CSV file. The script works fine when run locally on the server but I need to call
the script remotely for a number of servers and when I do this it does not output anything to the CSV. The script is run as a job.
$ArrList = [System.Collections.ArrayList]@()
# open file and read data
$arrlist.Add("$final")
$arrlist | sort -unique | out-file c:\scripts\iis_users.csv
If I change the script to use add-content it can add entries to the same CSV file. But ideally I need to sort the output as there are many duplicates.

Not sure why but that would only export the last user. I didn't have time to investigate so instead I decided to only add users to the array after first checking they didn't exist already:
if ($arrlist -notcontains $final)
$arrlist.Add("$final")
add-content c:\scripts\iis_users.csv "$final"
I thought this would create a performance hit but it seems almost as fast.

JPDA - Port not listening when running app on Unix box

Similar Messages

Maybe you are looking for