JRE 1.6 upgrage from JRE v1.4.2.05 and JRE v1.5.0.04

I am currently looking to update all the PCs in a company to JRE 1.6.
looking at the link
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
There are two files that control how JRE is configured during configuration; these files are called deployment.config and deployment.properties.
Can someone tell me firstly are these files needed for version 1.6
If so, do they working in the same way and what are the recommended settings for a silent installation to all PCs
thanks

Hey lynchmob,
Try these steps to correct the problem, you need to be logged in as an administrator:
1. Go to the group policy editor. You can get they by typing gpedit.msc into the Run dialog.
2. Navigate to computer configuration->administrative templates->windows components->internet explorer.
3. Disable "make proxy settings per-machine (rather than per-user)".
4. Login with the user account and go to Internet Options.
5. Go to the Connection tab.
6. Click on the Lan Settings button.
7. You may notice that the proxy settings are not correct. Change the proxy settings to be whatever is required for your proxy.
8. Configure Java to use browser proxy settings.
9. Open the java console.
10. Set debug level to 5.
11. Press 'p' to reload proxy settings. Use the trace messages to verify correct proxy settings were loaded.

Similar Messages

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • My wife recently switched from an iPhone to a Samsung and she can send text messages but she can't receive texts or emails. Any suggestions?

    My wife recently switched from an iPhone to a Samsung and she can send texts but she can't receive them nor receive emails. Her iPhone has had her info removed and the settings have all been set to default. What else does she need to do to correct this?

    In particular the last link is for you
    iMesssage to old phone
    If you move to another phone and forget to turn off iMessage then read “if you no longer have the device in http://support.apple.com/kb/HT5661  If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
    To deactivate iMessage http://support.apple.com/kb/ts5185
    Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995

  • Unplugging all network devices from Fios router prevents DVR freezing and remote control lock ups.

    All,
    I recently had a Verizon tech visit my house due to constant DVR and remote control freezing. TV content was freezing whether it was locally recorded, pulled from another DVR in the house, or On Demand. On a hunch after the tech tested everything and was about to leave, he unplugged my gigabit switch from the Fios router. Lo and behold everything started running perfectly. Since to the tech, the problem was solved, he closed the case and was on his way. The probem is of course I have more devices than the built in router switch provides ports for. My network is compised of an 8 port Netgear gigabit switch downstream from the Fios router with two wireless access points (with their own built in gigbait switches) connecting to the Netgear gigabit switch. There are no loops in the switch topology. I've tried changing out the router, the gigabit switch, removing the wireless acces points individually as well as plugging the access points directly into the Fios router switch (one at a time with no Netgear switch in the middle) and all scenarious cause the DVR/remote control freeezing to come back. The only devices I can plug into the Fios router without causing freezes are PC's....anything with it's own switch essentially brings the network to it's knees. If anyone has an idea how to get my network back in one piece AND make the DVR's/remotes behave, I'd greatly appreciate the help!
    My Fios equipment:
    MI-424WR GEN-3I  rev I (eye) running firmware 40.19.36
    5 Motorola HD-DVRs all QIP 7232-2 running software release 1.9.1 platform build 25.39 (Oct. 22, 2012)
    Specific config:
    75/35 Fios connecting via ethernet from ONT. Set-top boxes connect to Fios router coax port via powered splitter.
    *All SNR/dB mesasurements taken by the tech from the set-top boxes and router are well within spec.
    Fios router provides DHCP addressing. Wireless N access points are configured for roaming with the same SSID and non-overlapping channels. Access points are not providing routing or IP adressing...all layer 3 and up services still provided by Fios router
    Diagram:
    ONT
      |
    Fios Router ---------Cable Splitter---------Set Top Boxes
      |
    Netgear Switch
      |           |
    WAP1    WAP2

    WayfarerII wrote:
    ... DVR ... remote ... freezing ... TV ... whether ... locally recorded, pulled from another DVR ... 
    ... tech ... unplugged my gigabit switch from the Fios router ... and ... everything started running perfectly ...   
    ... config:
    75/35 Fios ... via ethernet from ONT ... Set-top boxes connect to Fios router via powered splitter ...
    ONT
      |
      | cat5
      |
    Fios Router ---------Cable Splitter---------Set Top Boxes
      |
    Netgear Switch
      |           |
    WAP1    WAP2
    I am inclined to echo several of the "tns" comments, particularly with respect to your splitter.  My layout is based on a standard 8-port splitter of the type usually supplied in a VZ install.  In addition I do have a ChannelPlus device that functions as a powered splitter, but its use is limited to distribution of secondary TV signals to older analog TVs.  My first point then is that this may be an offender as "tns" has suggested.
    In addition, I'd describe your wiring as "non-standard" (red-colored items in the above diagram)  As you're no doubt aware, with 75/35 you don't really need Cat5e from the ONT (your original diagram).  It seems the highest tiers do require it, but in "standard" installations this run is coax directly to an 8-port non-powered splitter (below diagram), then from that splitter via coax to all STBs and CableCards, other TVs, et.), and also to the Actiontec.   Subsequent feeds from the Actiontec to wired devices (including WAPs) are via Ethernet (typically Cat 5e).
    In fact I don't immediately see how your STBs get additional services such as On Demand and IMG with the wiring shown in your diagram (perhaps someone can help me out here).  In "standard" installs the Actiontec must be connected via coax to the ONT to provide such services to other network clients.  I don't see that requirement being met here.
    For starters I'd recommend that you change your service from WAN Ethernet to WAN coax.  This can easily be accomplished over the telephone.  Then I'd run coax directly from the ONT to the Actiontec as in my revised diagram below (blue-colored items).  If your setup can manage with this arrangement, I think it will help greatly with the "freezing" issue.
    ONT - - - - - - coax - - - - -
                                             |
    Fios Router --- coax--- Standard 8-Port Splitter --- coax --- Set Top Boxes
    |cat5
    Netgear Switch
    |cat5           |cat5
    WAP1 WAP2
    Subsequent Note:  You provided additional info while I was composing a response, and I'd  like to offer another comment.  Structured wiring "panels" of the type usually available are pre-configured to provide data, phone and video.  This usually means that one is in certain respects limited by the ideas of the panel designer.  I have what can be called a structured wiring layout, but it really is composed of individual small custom networks for  each service (automation, security, video, data, telco, etc.), configured so that all wiring terminates in "home run" fashion at a central panel (a few details here: http://forums.verizon.com/t5/Home-Networking/Cmon-Show-Us-Your-Network/m-p/481733#M765 ).  This layout makes it easier to make adjustments (and there have been quite a few over the intervening years).  I'm thinking that in your case you may have to abandon the powered splitter (presumably) built into the panel in order to avoid your present fix.
    Subsequent Subsequent Note:   From your description it seems that you are using more than a single "whole house" DVR to supply programming to other devices.  This is a bit puzzling to me because somewhere along the line I recall reading that only a single whole house DVR was allowed on the network.  Can you elaborate a bit?

  • Is this possible: SNC connection from SAP GUI to SAP Router, and ...

    Hi,
    I have (stupid perhaps) question.
    Is this scenario possible:
    SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
    I know how to set up scenario like this:
    SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
    Best regards,
    Marek Majchrowski

    Wolfgang,
    To be sure myself and Marek understand, can you confirm the different scenarios supported:
    Scenario 1:
    SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
    With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
    Scenario 2:
    SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
    With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
    Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
    SAP GUI -- (SNC conn) -- SAP System
    Scenario 3:
    This is the scenario mentioned by Marek in his initial question:
    SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
    With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
    Thanks,
    Tim
    Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

  • How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    http://support.apple.com/kb/ht5621

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

    Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

    Download Past Purchases
    http://support.apple.com/kb/HT2519
    Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

  • I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
    or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung

  • I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

    i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

    Hello dbrookes,
    Thank you for using Apple Support Communities!
    It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
    I wanted to recommend a couple of things.
    First, I would reset the phone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
    Just incase you need it, this article will help with that:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Sterling

  • How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

    How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

    The devices are not designed for transfer of that kind.  Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

  • HT1657 i recently rented a movie from the itunes store in hd and closed itunes on accident and after reopening itunes i cannot find my movie rental. ive searched in my  library, movies, etc. and i cannot find it anywhere

    i rented a movie from the itunes store in hd and closed itunes on accident after letting it download and after reopening itunes i am un able find my movie rental. ive searched in my  library, movies, etc. and i cannot find it anywhere. i did start it... but i have atleast another 20 hours to watch it before the rental expires.

    Doublechecking. Did you download the rental in iTunes for Mac, iTunes for Windows, or an iOS device?

  • Does anyone know how to unbind an app (Imob 2) from a device? I am trying to transfer my account from my iphone to my ipad and no matter how many times I try erasing all information, restoring through itunes...nothing works.

    I am trying to switch my imob account from my iphone to my ipad and when I try to transfer, the ipad says that i cannot transfer another imob account to it because I bound the imob account to the device that is already on the ipad. This is driving me crazy. Every time I try to permanently delete the imob app from the ipad and download a new one, it opens to my existing app that I keep deleting. I wiped the ipad clean numerous times. I even tried using a different apple id to download it. Nothing it working. Why can't I get rid of the information stored in the app that is on the ipad? It's creepy how it won't go away. So if I sold the ipad and someone else tried to download their own game, they would not be able to because my original information that is saved on the game would keep coming up. Any help is appreciated.

    Have you tried contactint the app's developer?

  • OS 10.8.2 on an imac.  Whenever I wake from sleep, the wifi has disconnected and I have to use the Netowrk Diagnostics in the Network settings to log back in to my router.  Every time.  is there any kind of fix for this?

    I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router.  Is there any way to get it to not disconnect everytime?  I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer.  Any help here?

    I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router.  Is there any way to get it to not disconnect everytime?  I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer.  Any help here?

  • Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
    Best of luck.

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

Maybe you are looking for