JSFL function exportPNG failing with "bitmap too large" error.

I'm trying to export to PNG from the JSFL document.exportPNG function with 'bCurrentPNGSettings' but it fails. Flash keeps complaining that "The bitmap is too large. The largest bitmap that can be created is 8000x800 pixels."
The width x height of the document is set to 1920x1080 and I've tried modifying the publish profile appropriately. Still no-dice.
If I set 'bCurrentPNGSettings' to false so that the export dialog appears it pops up with the correct width and height; clicking OK exports properly.
Anyone have any ideas?
Cheers.

I am experiencing a similar problem. I have hundreds of symbols, most of which export just fine. A few symbols, however, do not. Although these symbols are typically modest in size, 1x49 pixels for example, Flash throws the error "The bitmap is too large. The largest bitmap that can be created is 8000x8000 pixels." which halts the script until it is acknowledged by the user.
It seems that this "too large" error might appear anytime the width or height is out of range, as in it is either too large OR too small. If you allow the Export PNG dialog box to appear (or manually do a File...Export Image...), it has a Width of 4 pixels. When I try to correct the value to 1 pixel, another error is shown saying "Please enter a number between 4 and 8000." Anything outside this range will not be accepted.
I also noticed that when I specified "false, true" for the optional 2nd and third parameters, the Export PNG dialog fails to appear.
I am using Flash Pro CS5 on a PC.
I tried this using Flash CS4/PC. I had an even worse time with the dialog, as I changed the width and height, it automatically changed the dpi from 72 to whatever value entered.
So in order for the script to be able to exportPNG on all of the symbols in the library, I have to first check the symbol's dimensions, and either abort the export operation, or correct the values, forcing a minimum dimension of 4 pixels.

Similar Messages

Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error

Hi team,
I have issue with "SAP_COLLECTOR_FOR_PERFMONITOR" Job .it has been Finished but in Job Log I get error as below:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server sapqas01
Clean_Plan:Cleaning up jobs of system QAS
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan:terminated with error
REASON=Job error
Database system not supported
Reorganization of the database started
Reorganization of the database ended
Job finished
I have alredy reschedule this Job in 000 with DDIC User.
Please help me ,
Thanks
Vijay

Hello Vijay,
The "Database system not supported" error you see, suggests that your TCOLL table is not setup correctly. You probably have a report scheduled in your TCOLL which is for a different DB then the one you run.
If the collector canels all the time, then this is probably a report which is scheduled to run every hour in your TCOLL. If it only cancels sometimes, then it should be easier to identify which report is causing it in your TCOLL.
The bottom line is to ensure your TCOLL is setup correctly and that you are not running DB reports there that are for a different DB than the one you use. The SAP note you follow to setup your TCOLL table depends on your SAP system version:
12103 - Contents of the TCOLL table
970449 - Contents of TCOLL table in SAP_BASIS 640
966309 - Contents of table TCOLL in SAP_BASIS 700
966631 - Contents of TCOLL table in SAP_BASIS 710
Regards,
Brendan

Update trigger fails with value too large for column error on timestamp

Hello there,
I've got a problem with several update triggers. I've several triggers monitoring a set of tables.
Upon each update the updated data is compared with the current values in the table columns.
If different values are detected the update timestamp is set with the current_timestamp. That
way we have a timestamp that reflects real changes in relevant data. I attached an example for
that kind of trigger below. The triggers on each monitored table only differ in the columns that
are compared.
CREATE OR REPLACE TRIGGER T_ava01_obj_cont
BEFORE UPDATE on ava01_obj_cont
FOR EACH ROW
DECLARE
v_changed boolean := false;
BEGIN
IF NOT v_changed THEN
    v_changed := (:old.cr_adv_id IS NULL AND :new.cr_adv_id IS NOT NULL) OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NULL)OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NOT NULL AND :old.cr_adv_id != :new.cr_adv_id);
END IF;
IF NOT v_changed THEN
    v_changed := (:old.is_euzins_relevant IS NULL AND :new.is_euzins_relevant IS NOT NULL) OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NULL)OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NOT NULL AND :old.is_euzins_relevant != :new.is_euzins_relevant);
END IF;
[.. more values being compared ..]
    IF v_changed THEN
    :new.update_ts := current_timestamp;
END IF;
END T_ava01_obj_cont;Really relevant is the statement
:new.update_ts := current_timestamp;So far so good. The problem is, it works the most of time. Only sometimes it fails with the following error:
SQL state [72000]; error code [12899]; ORA-12899: value too large for column "LGT_CLASS_AVALOQ"."AVA01_OBJ_CONT"."UPDATE_TS"
(actual: 28, maximum: 11)
I can't see how the value systimestamp or current_timestamp (I tried both) should be too large for
a column defined as TIMESTAMP(6). We've got tables where more updates occur then elsewhere.
Thats where the most of the errors pop up. Other tables with fewer updates show errors only
sporadicly or even never. I can't see a kind of error pattern. It's like that every 10.000th update
or less failes.
I was desperate enough to try some language dependend transformation like
IF v_changed THEN
    l_update_date := systimestamp || '';
    select value into l_timestamp_format from nls_database_parameters where parameter = 'NLS_TIMESTAMP_TZ_FORMAT';
    :new.update_ts := to_timestamp_tz(l_update_date, l_timestamp_format);
END IF;to be sure the format is right. It didn't change a thing.
We are using Oracle Version 10.2.0.4.0 Production.
Did anyone encounter that kind of behaviour and solve it? I'm now pretty certain that it has to
be an oracle bug. What is the forum's opinion on that? Would you suggest to file a bug report?
Thanks in advance for your help.
Kind regards
Jan

Could you please edit your post and use formatting and tags. This is pretty much unreadable and the forum boogered up some of your code.
Instructions are here: http://forums.oracle.com/forums/help.jspa

Expdp failing with snapshot too old error

Hi,
We are getting the below errors while migrating partitioned tables using expdp.
The source and target databases are both running on 10.2.0.5 and the main thing is source database doesn't have any active sessions. This is a clone of a Prod Database and no one is accessing it.
ORA-31693: Table data object "DPMMGR"."WHSE_CTNR_EVNT_W":"MSG_PRCS_N"."MSG_PRCS_N_DC556" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-01555: snapshot too old: rollback segment number 31 with name "_SYSSMU31$" too small
ORA-31693: Table data object "DPMMGR"."RLTM_PRDCT_LOG":"RPL_20120814" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-01555: snapshot too old: rollback segment number 14 with name "_SYSSMU14$" too small
Undo Tablespace has enough space but still the expdp is failing.
SQL>/
TABLESPACE Totalspace(MB) Used Space(MB) Freespace(MB) % Used % Free
UNDO01 145096 115338 29758 79.49 20.51
SQL> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 14400
undo_tablespace string UNDO01
Please let me know any workarounds.
Thanks

Undo Tablespace has enough space but still the expdp is failing.increasing undo_retention will helps here.
undo_retention integer 14400currently 4 hr,increase it to 6 hr and try expdp again.

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

Page Too Large Error with JHS 10.1.3.2

Hi,
I have migrated to the new version of JHS (10.1.3.2). According to the JHS documentation the “page to large error” has been fixed in this version but I am still experiencing this problem.
I have checked the boxes for Generate Group in Region File and Generate Search Area in Region File in the app def for the large page that I have in my app. With this done the “page too large” error occurs. I then tried checking the box for Generate in Region File on each item group region on my page but the “page too large” error still happens. None of my item group regions contain that many items (average is about 10 items).
Is any one having the same issues?
Regards
Bar

josealej,
Have you spilt up your items into different regions and selected the option to generate the groups in a region file? If so then you can try setting the "generate in region file" option on each region container. Check out section 4.6.2 in the JHS developers manual.
Sandra,
Unfortunately I don't have enough free time to debug the problem. I will look into it when my schedule is not as hectic.
Bar

VPN error - Function CreateFile failed with an error code of 0x00000002

I got an error when connecting VPN, detailed messages are attached. I am using administrator to log on. The issue is there after I run a virus clean activity. Any help is appreciated.
Cisco Systems VPN Client Version 4.6.04.0043
Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
1 15:16:21.625 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
2 15:16:22.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
3 15:16:23.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
4 15:16:23.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
5 15:16:24.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
6 15:16:24.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
7 15:16:25.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
8 15:16:25.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
9 15:16:26.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
10 15:16:26.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)

Please see my post in the IPsec and Firewall forum.

Disk Utility: Creating a new blank image receiving "file too large" error.

Hello All!
I'm trying to create a 10GB non-encrypted, non-compressed RW blank image via the disk utility. The DU runs for a few minutes then barfs out "file too large" error. I have over 30GB free on my HDD. I tried with a smaller size of 6GB to no avail. Also tried unsuccessfully to create from a file (about 4 GB). My ultimate goal is to create a case-insensitive image to run an extremely important program needed for high priority work productivity (i.e. WoW). Thanks in advance for any advice! You will be my new best friend if you help me resolve this. =D
Hollie
"There are only 10 types of people in this world: Those who understand binary, and those who don't."

Hi Hollie, and welcome to the forums!
Have you created images before successfully?
Is this to/on your boot drive, or an external drive?
Have you done any Disk/OS maintenance lately?
We might see if there are some big temp files left or such...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is now free, and likely the best/easiest...
http://www.omnigroup.com/applications/omnidisksweeper/
WhatSize...
http://www.macupdate.com/info.php/id/13006/
Disk Inventory X...
http://www.derlien.com/
GrandPerspective...
http://grandperspectiv.sourceforge.net/

"result too large" error when accessing files

Hi,
I'm attempting to make a backup copy of one of my folders (using tar from shell). For several files, I got "Read error at byte 0, reading 1224 bytes: Result too large" error message. It seems those files are unreadable. Whatever application attempts to access them results with the same error.
The files reside on the volume that I created a day ago. It's a non-journaled HFS+ volume on external hard drive. They are part of an Aperture Vault that I wanted to make an archive copy and store offsite. Aperture was closed (not running) when I was creating the archive.
This means two things. The onsite backup of my photos is broken, obviously (some of the files are unreadable). My offsite backup is broken, since it doesn't contain those files.
I've searched the net, and found couple of threads on some mailing lists describing same problem. But no answer. Couple of folks on those mailing lists suggested it migh point to full disk. However, in my case, there is some 450GB of free space on the volume I was getting read errors on (the destination volume had about 200GB free, and system drive had about 50GB free, so there was plenty of space all around the system too).
File system corruption?
Mac OS X (10.4.9)

Here's the tar command with the output:
$ tar cf /Volumes/WINNIPEG\;TOPORKO/MacBackups/2007-05-27/aperture.tar Alex\ -\ External\ HD.apvault
tar: Alex - External HD.apvault/Library/2003.approject/2007-03-24 @ 08\:17\:52 PM - 1.apimportgroup/IMG0187/Thumbnails/IMG0187.jpg: Read error at byte 0, reading 3840 bytes: Result too large
tar: Alex - External HD.apvault/Library/2006.approject/2007-03-24 @ 08\:05\:07 PM - 1.apimportgroup/IMG2088/IMG2088.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Alex - External HD.apvault/Library/Jasper and Banff 2006.approject/2007-03-25 @ 09\:41\:41 PM - 1.apimportgroup/IMG1836/IMG1836.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Alex - External HD.apvault/Library/Old Scanned.approject/2007-03-24 @ 12\:42\:55 AM - 1.apimportgroup/Image04_05 (1)/Info.apmaster: Read error at byte 0, reading 503 bytes: Result too large
tar: Alex - External HD.apvault/Library/Old Scanned.approject/2007-03-24 @ 12\:42\:55 AM - 1.apimportgroup/Image16_02/Info.apmaster: Read error at byte 0, reading 499 bytes: Result too large
tar: Alex - External HD.apvault/Library/Vacation Croatia 2006.approject/2007-03-25 @ 09\:47\:17 PM - 1.apimportgroup/IMG0490/IMG0490.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Error exit delayed from previous errors
Here's the "ls -l" output for one of the files in question:
$ ls -l IMG_0187.jpg
-rw-r--r-- 1 dijana dijana 3840 Mar 24 23:27 IMG_0187.jpg
Accessing that file (or any other from the above list) gives same/similar error. The wording differes from command to command, but basically it's the same thing (read error, or result too large, or both combined). For example:
$ cp IMG_0187.jpg ~
cp: IMG_0187.jpg: Result too large
The console log doesn't show any related errors.

File too large error message

I have an iBook G4 and I am running Numbers '08. I tried to open my budget document today and got an 'The document can't be opened because it is too large' error message. I just opened it a few days ago and it was fine, and my other Numbers documents are opening fine. It is a spreadsheet with about 5 sheets - not really THAT big, especially considering some of the Excel spreadsheets I deal with at work. Any ideas? This is (of course) the most important document on my computer...

(1) comparing to Excel documents size is meaningless.
Given the fact that Numbers uses xml, its files are huge.
(2) Try to close every application including Numbers then, double click your document.
Doing that you will have the maximum memory available for the document.
(3) check the quantity of space available on your HD.
Numbers make an heavy use of virtual memory so, it need a lot of free space available on the HD.
If these tracks don't help, you may send the document to my mailbox (use the free YouSendit if it's too big for a attachment)
I would try to open it and scan it to see if there is a way to reduce its memory requirements.
Click my blue name to get my address.
Don't worry if it contains personal infos, i'm neither the KGB, nor the CIA.
Yvan KOENIG (VALLAURIS, France) dimanche 1 août 2010 10:42:09

Code too large error

Hi,
I have an enum with about 3000 values in application. When I add some more items I get "code too large" error during compilation.
Is there any workaround for that problem? (Some configuration change?)
What exactly does compiler want to say? Where can I find info about what limit do I exceed?
I will appreciate any kind of help :)
Greetings
Michal

what can you kno? Model of the form is not hardcoded, it is in DB, it is modifiable by user(admin). Only elements which have specific business validation have identifier (i mean enum identifier). They must be somehow identified, not just by number. Number may change if sone adds a question before this one.
What's better than that? The solution has been made before I came to the company, but I believe it is one of the best possible.

'Program Too Large' error in PL/SQL

How to get rid of 'PLS-00123 - Program Too Large' error ? This comes when the program to be compiled goes more than a certain limit.
One way is to make the program modular by splitting the logic in several Procedures/functions and packaged procedures.
Is there any other way to fix this problem ? Any variable or parameter which we can set to get rid of this error.
Thanks.

There are some linits on program size and so the obvious thing to do (as the error suggests) is to break the program unit. It makes it a lot easier to maintain as well.
Regards
Grant Ronald
Forms product Management

When editing a wiki page, get a 'request entity too large' error message.

[https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators|https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators] I'm trying to edit one of my wiki pages that has been static for about 5 months now, and when I try and save the page, I get the following message (note I cropped some because of formatting issues when posting):
*413 Request Entity Too Large*
HTTP/1.1 413 Request Entity Too Large Date: Tue, 18 Oct 2011 15:35:41 GMT Server: Oracle-Application-Server-10g Connection: close Transfer-Encoding: chunked Content-Type: text/html; charset=iso-8859-1
Request Entity Too Large
The requested resource
/teamcollab/wiki/<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><meta content="text/html; charset=utf-8" http-equiv="Content-Type" /><script type="text/javascript"> var U = "undefined"; var gHttpRelativeWebRoot = "/ocom/"; var SSContributor = false; var SSForceContributor = false; var SSHideContributorUI = false; var ssUrlPrefix = "/splash/"; var ssUrlType = "2"; var g_navNode_Path = new Array(); g_navNode_Path[0] = '1790'; g_navNode_Path[1] = 'splash_collabsuite'; var g_ssSourceNodeId = "splash_collabsuite"; var g_ssSourceSiteId = "splash";</script><script id="SSNavigationFunctionsScript" type="text/javascript" src="/ocom/websites/splash/sitenavigationfunctions.js"></script><script id="SSNavigationScript" type="text/javascript" src="/ocom/websites/splash/sitenavigation.js"></script><script type="text/javascript">var g_strLanguageId = "en";</script><script type="text/javascript" src="/ocom/resources/wcm/sitestudio/wcm.toggle.js"></script><script type="text/javascript" src="/ocom/resources/sitestudio/ssajax/ssajax.js"></script> <script id="ssInfo" type="text/xml" warning="DO NOT MODIFY!"> <ssinfo> <fragmentinstance id="fragment1" fragmentid="universal-metatag" library="server:UNIVERSAL-FRAGMENTS"> </fragmentinstance> <fragmentinstance id="fragment2" fragmentid="ExternalSiteCatalystFragment" library="server:EXTERNALSCFRAGMENTLIB"></fragmentinstance> </ssinfo> </script> <meta name="GENERATOR" content="MSHTML 8.00.6001.18904" /><title>Collabsuite Outage</title><meta name="Title" content="Collabsuite Outage"><meta name="Description" content="Collabsuite Outage"><meta name="Keywords" content="Collabsuite Outage"><meta name="robots" content="NOINDEX, NOFOLLOW"><meta name="country" content=""><meta name="Language" content="en"><meta name="Updated Date" content="4/12/11 10:38 AM"> </head><body> <!--SS_BEGIN_SNIPPET(fragment1,code)...
does not allow request data with GET requests, or the amount of data provided in the request exceeds the capacity limit.
Additionally, a 413 Request Entity Too Large error was encountered while trying to use an ErrorDocument to handle the request.
The page, should you wish to eyeball it, is at:
https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators

Duane,
This looks like the URL has the content of a wiki page as an attachment to the URL which is blowing up the get request. Can you go to the earlier version - the history should allow you to backtrack changes - if you access this earlier version and change something small - does it save OK. If so then maybe the change you made is the problem.
I cannot access the workspace without being given explicit access so this is a guess.
Phil

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

JSFL function exportPNG failing with "bitmap too large" error.

Similar Messages

Maybe you are looking for