Jsp+Tomcat: Is there a max number of lines in a html file generated?

Hi, I write a jsp page that does a lot of queries on a database and, for each query, views a table with the records return by the query. I have a problem: if the number of queries is low the page work well; if the number of queries is high the page has been truncated. If a watch at the html file of the browser it's like truncated. Are there any parameters that i have to modify? thaks very much

Truncation usually indicates that an exception occurred after the response had already been committed (due to the output buffer becoming full which will cause it to be flushed).
check out the logfiles of your webserver if there are any unexpected exceptions in there.

Similar Messages

Is there a max number of names that can be put into Contacts

is there a max number of names that can be put into Contacts and still have the app work well?

Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

Is there a max number of iCloud clients

iCloud supports my iPhones and Windows 8.1 calendars, but structurally discards my iPad. Is there a max number of iCloud clients ina network?

Hallo James, It seems that your suggestion did work! The sync, however, came much later than those on the smart phones. I reentered my Apple password and turned the iPad calendar iCloud button OFF and ON and after, say, half an hour I got missing calendar items on the iPad.
10 Points for you! Thanks.

Is there a max number of Apple pro prints allowed per order? I tried 300, then 65 and neither worked. At $2.99 per for shipping, it is expensive to order 20 sets when I used to do just one for all.

Is there a max. number of Apple pro prints allowed per order with the updated iPhoto/Mountain Lion?
I have been using the system for years and have had no issues, but this first try under Mountain Lion I was told the max was 300 prints per order.
It order did not go through, nor did one with 65 photos. When I tried 2, it was fine, but at $2.99 shipping, plus tax,
paying $60 to get all 300 of my photos shipped is unreasonable.
Is this a glitch in the new OS? Hopefully it will be fixed.

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

How to find number of lines in an input file.

Hi,
Can someone tell me, if there is a way to find out the number of lines in an input file. I do not want to read line by line and then count the number of lines read.

Then how do you think a program could determine the amount of lines in an input file? How does a human know how many lines are on a page? You're going to have to count the items that separate two lines to know how many lines are in your file.
Either read line by line and count the amount or read char by char and count the number of '\n' occurences instead.
If you have control over writing the input files, however, you can make this better. Write a header in the file that specifies the amount of lines in it. The first line of your file will then hold a number that represents the amount of lines in the file, so you need only read the first line to know how many lines are in your file.

Count the number of lines in a txt file

I need to count the number of lines in a txt file, but I can't do it using readLine(). This is because the txt file is double spaced. readLine() returns null even if it is not the end of the file. thanks for the help

I need to count the number of lines in a txt file,
but I can't do it using readLine(). Then just compare each single byte or char to the newline (code 10).
This is because the txt file is double spaced. readLine() returns
null even if it is not the end of the file.Errm what? What do you mean by "double spaced"? Method readLine() should only return null if there's nothing more to read.

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

Is there a max number of parameters that can be passed to a C function in test stand v. 1.0.1

I have had an issue with test stand version 1.0.1 (yes, I know; it's quite old) and calling a C function thru an action step. when I call this function with 18 parameters, it seems to hang. I have called a function with 16 and it seems to work. Is this a limit of the software? I am calling the function from a windows DLL that we've created. When I try to pull the function from the dll into test stand I also get a { error...but I get that in the other function's call and it seems to work fine. Any ideas?

ok, upon re-reading what I posted I can clearly see your confusion. haha. I think there are two separate issues.
1) Are there a maximum number of parameters one can use when calling a C function from a DLL? Yes, i'm trying to call a C function from test stand.
2) when I select the "module" tab, and select which DLL contains my function, the prototype has no information associated with it (by clicking the reload prototype button). I'm not sure why, as I'm using a declspec to send the function information out of the dll, but that's another topic. So I click on the source file tab and point the window to the .cpp of my function (within the DLL's project workspace) and when it begins to parse the file, I get an error about mis-matched curly brackets and if I wish to continue, and skip the rest of the parsing.
I click "OK" and when I go back to the module tab, I am able to see all my functions, along with the parameters in the drop down menu below. I fill in all the parameters and everything looks ok; no syntax errors, or anything else seemingly suspicious. I then run my test stand code and when I get to the step which calls this function, the system hangs and cannot proceed.
Any thoughts as to what might cause these issues?

Max number of lines in method.

Hi,
Syntatically a method can span for any number of lines, but is there
a limit on number of lines in a method so that it conforms to java code
conventions. Could not find anything about the number of lines in Sun java code conventions doc.
Thanks
Deepak

The whole point is write a method that does only one thing. The hard thing is to determine what one thing is. A method which only
does one thing can also become long, and needs to be broken down
to several small methods. A method name is a very good documentation
(unless you use random method names)I also use one of my few rules of thumb here:
rule#5059723586: if you can't describe in one sentence, using
appropriate detail, what a method does, it needs to be refactored to
at least two methods. repeat rule#5059723586 as long as applicable.
rule#5059723586B: The verbs and nouns of the 'appropriate detail'
mentioned in rule#5059723586 must refer to members, parameters
or other methods (see also rule# 5059723586)
kind regards,
Jos ;-)

Restriction on number of line items in an automatically generated document

Hi all,
As per my info, an accounting document must have a minimum of 2 line items to complete the document. At the same time an accounting document can have a maximum of 999 line items.
My observation:-
When I am posting depreciation using t-code AFAB, system is posting depreciation document (document type AF). While checking, I found that the system has posted around 16 document for a period.
On further checking, I observed that the each document contains a max 100 line items.
I am using SAP 4.7
My Query:-
a> Is there any way / place wherein we can restrict the maximum number of line items possible for a given docuemnt type or for all document types in the client?
b> In case it is not possible to restrict the number of line items per document, what could be possible reason for the system behaviour wherein it is posting about 100 line items per document & thereafter starts a new document.
Thanking you in advance
Santosh K Agarwal

Hi,
I have been reading CIN. There I came across with a statement i.e. "There is restriction on no of line items to be in an Excise Invoice".
where you read this i dont know
but yes for outgoing excise invoice we can put limitation in sap cin
as per incoming excise invoice i think no limitation
in path SPRO-tax on goods movemnet-India-basic setting-maintain excise registration here you can maintain this
and yes this for india only for other country they may have different
Regards
Kailas ugale

Is there a way where I can give an HTML File and pass database values to it?

Hello,
I have a Report that has Complex Layout with different Fonts,sizes etc.
After designing it in Front Page, the HTML Source comes to be around 180 KB. Portal Reports with Custom Layout fail to get this size of layout code( seems the limit is around 32KB).
Writing my own stored Package using htp/htf calls, but still I needed to paste this entire 180KB Code and replace the layout names with database names. This works fine but the readability of this code is ugly.
Is there a way where I can feed the database values as parameters along with the HTML File to pick substitute and then
show me the output?
Thank you.
Madhav

you can use dynamic pages!

Is there a max number of actions a button can have?

I'm building an interactive matrix in InDesign (CS5.5 Mac) with stacked buttons to implement the change of state for a given spot on the grid. This is working fine in Acrobat, but when I made a "master reset" button in InDesign (setting 96 buttons to "hidden" and 96 buttons to "visible"), not all of the actions transferred to the button when opened in Acrobat.
My question: is there a limit to the number of show/hide fields a single button can have? If so, I have a pretty good idea how to work around the limit, but want to be sure before proceeding.
Acrobat 9 Pro, Mac OS 10.6.8.
Thanks,
Ben

I highly recommend you do it with a script. Not only you won't have this
issue with the maximum number of actions (which I have no answer for,
sorry), but maintaining it would be MUCH easier and more straight-forward.
Imagine you decide to change the name of one of the fields, or remove it.
You'll have to go over all the actions and find the relevant one. In a
script you could do it in seconds, and it would be much easier to find out
if something went wrong.

Number of line exceeds in source file by 999 then create another IDOC

Hi
I am working on a scernario
There 3 source files and each file should may have more than 999 lines.
I need to create idoc only for 999 lines so when lines exceeds then new idoc should be created.
Can anyone tell me the resolution for the same.
Regards
Ria

Hello,
Change the FCC configuration.. as described in below.
Record set Strcture : *,999
Record Sets per message as : 1
To eliminate header : Document offset : 1
Try this by putting message protocol as file content convertion.
Thx
Subbu

How many number of lines of code Java File can have?

Hi ALL
Is there any limit on java source file code length?
does more code (say more than 4000 line) impact on performace?
Is there any recomendation on code length and file size?
Thanks

Hi ALL
Is there any limit on java source file code length? There are some (VM) limitations but I have only hit that one when I had some generated code.
does more code (say more than 4000 line) impact on
performace?No, but you probably have a stupid design if you have 4000 lines in one file.
Is there any recomendation on code length and file
size?You should usually only have one top level clas per file, and you should try to have less than 1000 lines in one class.
Kaj

Increasing the number of columns on a text file generated by report builder

Hello otn,
I have a report with more than 37 colomns, when I generated this report to a text file I only have 30 cols. displayed on my test file???
is there any way to have my 36 cols. on the text file??
thank u in advance

Hi again,
I tested DESFORMAT but it doesn't work as I wanted, I did something else that is more efficient, as I wanted to have a text file from a view,table,..., I used write block from F60UTIL librairy with forms builder and it works fine now 100%, I'm writing this maybe it could help some one with the same needs...
Thank u

Jsp+Tomcat: Is there a max number of lines in a html file generated?

Similar Messages

Maybe you are looking for