JSP - Tomcat Setting/Configuration

Hi, guys..
I m using Tomcat as the sever environment for running JSP... Normally my JSP files are stored in Tomcat webapp ROOT folder and work well...
However, this time I need to run some JSP files which are NOT in ROOT folder but other directories (I CANNOT move them to ROOT folder also)... In order to make these JSP pages functional, how do I configure the Tomcat setting? Thanks a lot!
SD

Well
AS they have said, the ROOT is not for putting your files.
You should know the directory structure of the web-application. But to place your application anywhere in the hard disk and have tomcat load it, its context needs to be included in the server.xml file (located in the conf dir. under $TOMCAT_HOME )
Use this link for further info
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/config/context.html

Similar Messages

How WML and JSP can be configured in Tomcat 4.0 just as HTML and JSP

hello all of my friends!
Currently i am working on wap development but i cant find any thing to run my application, i am using Tomcat 4.0 can u plx help me and tell me how can i run Wml in tomcat( what configurations are required?) the application will work just as html-------JSP-Webserver.......ThankYou.

You can work just like you did with html, but replace your content with wml-tags. I usually check for the accept-header in the http-reqest, to separate wap-users from web-useres:
if(request.getHeader("accept").indexOf("text/vnd.wap.wml")>=0){
response.setContentType("text/vnd.wap.wml");
<xml version=1.0 DOCTYPE .........>
<wml>
<card ..>
</wml>Also, your webserver must support this mimetype. Tomcat 4 has that, but to be sure, check in server.xml, it holds a long list of mime-associations.
good luck

Unable to set configured property "/Initial.initialServices"

Hi All,
I am getting following error-
05:21:52,006 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet
05:21:52,013 INFO [STDOUT] **** Error
05:21:52,064 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet
I have checked the config path of both components and the structure of servlet is as below-
src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java
And for the properties files I have created them under the path- config/atg/dynamo/servlet/dafpipeline and config/atg/dynamo/servlet/pipeline
Inside these I am keeping the FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties files
The path of Initial.properties is as below- config/atg/dynamo/servlet/Initial.properties
The content of Initial.properties is -
initialServices+=\
/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,\
/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
Should I need to keep the both pipeline- dafpipeline and pipeline or only one of them?
And my pipeline structure is correct or not?
How to resolve the above error?
Please help regarding this!
Regards,
Prateek

The content of config/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
loggingDebug=false
And the content of config/atg/dynamo/servlet/pipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/pipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
bypassExtensions=.css,.gif,.jpg,.swf
loggingDebug=false
I think this will clear the confusion.
Regards,
Prateek

Catching jsp/tomcat/java SQL error

I have been trying to get the sample code to work from an old book. I was finally able to get it to run under tomcat 4.1.31 but there is one bug I just cannot figure out how to handle. I am a beginner to Java/JSP/Tomcat and have about 16+ hours invested in this problem so far.
The delFruit.jsp calls methods from FruitConnect.java.
I found that if the fruit chosen for deletion was not involved in a referential integrity link to a FruitMonth file the code works fine. But if it is linked the delFruit.jsp just displays a blank screen and nothing is deleted. It is fine for it not to be deleted but I cannot find anyway to handle it. I tried to add the checkFruitForSale bandaid below but it causes me a blank screen as well.
Any help would be appreciated.
It would be great if I could just see what is happening when FruitConnect is processing code. I get no errors, just a blank screen. I'm going to try using NetBeans and their debugger next.
Here is delFruit:
<%@ page import="java.sql.*" %>
<jsp:include page="adminHeader.html" flush="true" />
<jsp:useBean id="fruitConnect" class="fruit1.FruitConnect" />
<%
String msg = "The following fruits have been deleted: ";
//Build the list of fruits to delete
String delFruit[] = request.getParameterValues("delFruit");
//WE WILL ONLY GET CHECKBOXES THAT WERE CHECKED
 String fruitList = "";
 if (delFruit != null){
 int len = delFruit.length;
 fruitConnect.dbConnect();
 for (int i = 0; i < len; i++) {
 String passfruit = delFruit;
 if (fruitConnect.checkFruitForSale(passfruit)) {}
 else{
 fruitList = fruitList + "'" + delFruit[i] + "',";
 msg = msg + delFruit[i] + " ";
 out.print(msg);
 out.print(msg);
 fruitList = fruitList + "'nonsense'";
 if (fruitConnect.deleteFruit(fruitList) < 1) {
 msg = "There was an error deleting the fruits from the database.";
 else{
 msg = "Deletion was successful";
 fruitConnect.dbDisconnect();
else {
 msg = "You must select some fruit to delete.";
%>
HERE IS FruitConnect.java
package fruit1;
import java.sql.*;
public class FruitConnect {
 private Driver drv = null;
 private Connection conn = null;
 private ResultSet rs = null;
 private Statement stmt = null;
 public FruitConnect(){}
 public void dbConnect() throws Exception{
// drv = (Driver) Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
// conn = DriverManager.getConnection("jdbc:odbc:Fruit");
try{
 drv = (Driver) Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
 conn = DriverManager.getConnection("jdbc:odbc:Fruit");
catch ( SQLException sqlException)
sqlException.printStackTrace();
finally
try{
catch (Exception exception)
 public boolean getNextItem() throws Exception{
 boolean ret = rs.next();
 return(ret);
 public String getItemNameString(String columnName) throws Exception{
 String name = rs.getString(columnName);
 return(name);
 public float getItemNameFloat(String columnName) throws Exception{
 float name = rs.getFloat(columnName);
 return(name);
 public boolean selectFruits() throws Exception{
 String query = "SELECT Id, Name FROM Fruit";
 stmt = conn.createStatement();
 rs = stmt.executeQuery(query);
 boolean ret = false;
 if (rs != null)
 ret = true;
 return(ret);
 public boolean selectMonths() throws Exception{
 String query = "SELECT Id, Name FROM Month";
 stmt = conn.createStatement();
 rs = stmt.executeQuery(query);
 boolean ret = false;
 if (rs != null)
 ret = true;
 return(ret);
 public boolean selectFruitForSale() throws Exception{
 String query = "SELECT F.Name AS Fruit, M.Name AS Month, Price, Weight, (Price * Weight) AS TotalPrice FROM FruitMonth AS FM, Fruit AS F, Month AS M WHERE FM.FruitId = F.Id AND FM.MonthId = M.Id ORDER BY M.Id";
 stmt = conn.createStatement();
 rs = stmt.executeQuery(query);
 boolean ret = false;
 if (rs != null)
 ret = true;
 return(ret);
 public int insertFruit(String name) throws Exception{
 String query = "INSERT INTO Fruit (Name) VALUES ('" + name + "')";
 stmt = conn.createStatement();
 int ret = stmt.executeUpdate(query);
 return(ret);
 public int insertFruitForSale(String insertValues) throws Exception{
 String query = "INSERT INTO FruitMonth (FruitId, MonthId, Price, Weight) VALUES (" + insertValues + ")";
 stmt = conn.createStatement();
 int ret = stmt.executeUpdate(query);
 return(ret);
 public int deleteFruit(String fruitList) throws Exception{
 String query = "DELETE FROM Fruit WHERE Name IN (" + fruitList + ")";
 stmt = conn.createStatement();
 int ret = stmt.executeUpdate(query);
 return(ret);
 public void dbDisconnect() throws Exception{
 stmt.close();
 conn.close();
 public boolean checkFruitForSale(String thisfruit) throws Exception{
 String query = "SELECT F.Name AS Fruit, M.Name AS Month, Price, Weight, (Price * Weight) AS TotalPrice FROM FruitMonth AS FM, Fruit AS F, Month AS M WHERE FM.FruitId = F.Id AND FM.MonthId = M.Id AND F.Name IN (" + thisfruit + ") ORDER BY M.Id";
try{
 stmt = conn.createStatement();
 rs = stmt.executeQuery(query);
catch ( SQLException sqlException)
sqlException.printStackTrace();
 boolean ret = false;
 if (rs != null)
 ret = true;
 return(ret);
finally
try{
catch (Exception exception)
 boolean ret = false;
 if (rs != null)
 ret = true;
 return(ret);
 public String Check1(String columnName) throws Exception{
 String name = rs.getString(columnName);
 return(name);

First thing to check would be the Tomcat log file. Most likely there is an error message printed there:
Look in [TOMCAT]/logs for any files modified recently. Open it, and you should find some hints as to your error.
It would be great if I could just see what is happening when
FruitConnect is processing code.For that sort of thing, you want to use a logger. Either Log4J or the standard Java1.4 logger would help. Basically configure it to log statements to file as your program runs.
I get no errors, just a blank screenThat could indicate that the page ran enough to fill up the page buffer, and then failed. When you view source, do you see anything on the page at all?

How to combinate JSP+Tomcat+mysql??

Hi,guys. My question is as the above subject.
I have installed JDK, Tomcat, mysql, and my OS is WinXP, I am trying to develop a JSP site in my computer.
For JDK, the commands javac, java, ...... work OK;
For Tomcat, http://localhost:8080 works OK, meaning the cat page appears.
For mysql, I can login, and sql statements work OK;
And I download mysql-connector-java-3.1.8a.
What I should do further to combinate JSP+Tomcat+mysql, so my JSP site can work? Any advice?
I need help.
Thanks in advance!

Thanks,duffymo!
As you said, I am learning more about those things.
Actually I am trying to open a JSP webpage to show the connection JSP+Tomcat+mysql works OK.
I copied the mysql-connector-java-3.1.8-bin.jar to ...Tomcat 5.0\common\lib,
created a datebase, named test in MySQL, and wrote a JSP as the below:
<%@ page contentType="text/html; charset=gb2312" %>
<%@ page language="java" %>
<%@ page import="com.mysql.jdbc.Driver" %>
<%@ page import="java.sql.*" %>
<%
//driver
String driverName="com.mysql.jdbc.Driver";
//username
String userName="test";
//code
String userPasswd="123";
//database
String dbName="test";
//table name
String tableName="mytab";
//connection string
String url="jdbc:mysql://localhost/"+dbName+"?user="+userName+"&password="+userPasswd;
Class.forName("com.mysql.jdbc.Driver").newInstance();
Connection connection=DriverManager.getConnection(url);
Statement statement = connection.createStatement();
String sql="SELECT * FROM "+tableName;
ResultSet rs = statement.executeQuery(sql);
ResultSetMetaData rmeta = rs.getMetaData();
int numColumns=rmeta.getColumnCount();
// output
out.print("id");
out.print("|");
out.print("num");
out.print(" ");
while(rs.next()) {
out.print(rs.getString(1)+" ");
out.print("|");
out.print(rs.getString(2));
out.print(" ");
out.print(" ");
out.print("successful!");
rs.close();
statement.close();
connection.close();
%>
How can I test the connection JSP+Tomcat+mysql works OK?
Thanks again!

How to do Regional Setting Configuration in RDP session ( Eg Date Format, Currency, Decimal Seperator etc)

Hi All,
I am new to Windows Server 2008 R2 administration.
I would like to know is there a way to do Regional Setting Configuration in RDP session. i.e Date Format, Currency, Decimal Separator etc are based on users local machine.
Eg If a user from UK logs in he should see date format as DD/MM/YY and if user from US logs in he should date format as MM/DD/YY.
We are currently using citrix and we are managing this using logon script that runs based on citrix published application name.
Is there any way we can achieve the same in RDP ?
Thanks in Advance.
Thanks & Regards,
Nithin Kumar

Hi Nithin,
Do you need any other assistance?
Thanks.
Dharmesh Solanki
TechNet Community Support

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

Unable to set configured property

Hi,
I am getting this following error during my server start up
**** Error Unable to set configured property "/atg/
dynamo/servlet/dafpipeline/AccessControlServlet.accessControllers" atg.nucleus.ConfigurationException
Please help me out.
Thanks in advance,
Jk

did u add ur own accessControlles ?
It might not have been defined properly.
follow the below link -
http://docs.oracle.com/cd/E23507_01/Platform.20073/ATGPersProgGuide/html/s0508configuringtheaccesscontrolservl01.html

BC SET Configuration(urgent)

hi folks,
my requirement is this..
QATS requires BC sets print with the documentation which cover all the details of the BC Sets such as BC Set Structure, Table Overview, Variable overview, IMG path, Field overview, as well as all the information captured in the BC Set documentation etc. The same output should be able to save in RTF or PDF format as well as it should be able to print the same with documentation details.
please throw some light on BC SET configuration also regarding the usage of the function module SCPR_DB_GET_DETAIL.
Regards,
Nagaraj

Hi all
Thank you very much.. i hope you are not getting my problem.
In the BDC i have kept the mode selection in the selection screen and checked the entire flow.. in the fore ground through the BDC.
In BDC the BC Set is getting updated. without any error.. and if there is any error.. it triggerring the error message..
but.. the problem here is with the BC Set. it is not getting updated when the updation is done through the BDC.
Is there Any one well versed in BC Set.. can you please help me.
Thanks In Advance
Guhapriyan Subrahmanyam

Combining result states from UI (VC) and CO "Set Configuration" tab

Dear collegues,
it seems that one can either use result states defined in Visual Composer end points or defined on CO level in "Set configuration" tab but cannot combine them within an GP action.
Has anybody of you tried to implement it together?
The reason is that I would like to strictly decouple UI and process layer - to be able to run UIs without GP process. So I don't want to have eg. "Terminate process" button in VC UI, but still want to provide this termination on processl level.
Thank you for any hint
Best regards
Antonin

Dear collegues,
it seems that one can either use result states defined in Visual Composer end points or defined on CO level in "Set configuration" tab but cannot combine them within an GP action.
Has anybody of you tried to implement it together?
The reason is that I would like to strictly decouple UI and process layer - to be able to run UIs without GP process. So I don't want to have eg. "Terminate process" button in VC UI, but still want to provide this termination on processl level.
Thank you for any hint
Best regards
Antonin

Jboss/tomcat mapping configuration error

I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>

<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.

Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps.

BEAN ITERATION IS THIS A BUG in JSP /TOMCAT?

Hi,
I am new to JSP but I cant understand why I am getting this problem. I am trying simply to loop thro' an array of beans and print out their value.
A code sample is below:
<%@ page import="subscription.*" %>
<jsp:useBean id="event" class="subscription.EventBean"/>
<%
EventBean[] events = (EventBean[]) request.getAttribute("events");
<%for (int i=0;i< events.length;i++) {
event= events;
%>
bean is<jsp:getProperty name="event" property="id" /> 
<%}%>
All I get is a list of event ids at 0 as opposed the the id values. It seems to not be referencing the new bean.
If I change the jsp;getProperty to <%=event.getId()%> the correct ids are retrieved. I am using Tomcat 4.1.
I can only think this is user error, as I have not found any similar listings
Help would be welcomed!
Emma.

Hi,
Thankyou for trying to help. Unfortuanately you solution does not work as
you are assiging an object (EventBean) to an array of objects (EventBean).
I can help thinking problem I am getting is because somehow when you do a
<jsp:useBean> to instantiate a bean you can reassign it later on in a scriplet, which is what I am doing. Why you cant is not something I understand.
Maybe it would help if I explained what I want to do. I am trying to get an array of beans from one jsp page and print them out in another.
so my thoughts were (and ironically the text book I am using does exactly this)
//instantiate an EventBean using
<jsp:useBean id="event" class="subscription.EventBean"/>
//get the attributes (they are attributs cos I am dispatching servlet to //jsp page)
<% EventBean[] events = (EventBean[]) request.getAttribute("events"); %>
//This now gives me the array of eventbeans I want to pring out and //rather than do it all in a scriplet try to use jsp tags which is what //all the bks say you should do.
//so I iterate thro' array and assign my EventBean object that I //instantiated using the jsp:useBean
<%
for (int i=0;i< events.length;i++) {
event= events;
%>
//now I try to print out a property (id in this instance)...
<jsp:getProperty name="event" property="id" />
<% } %>
but IT DOES NOT WORK!! I have to go <%=event.getId() %>
my bean is dead simple and works if I am doing simple stuff like setting and getting attributes on a single bean.
Maybe I a not getting scoping in JSP , it is not that clear,like normal
java code and any docs to look at would be welcomed.
Emmma.

Using JSP to set form data and automatically submit

I am using JSP to extract the authentication details form the header, and then set these values and automatically submit them them to a javascript cookie function. I can extract the information, but setting and submitting to javascript seems to be a problem. I don't want to modify the original code because that may change, and if it does change, they can just copy the jsp block to the new page. Plus there may be more pages where I will need to do the same. Any suggestions?

I am making this a JSP and hosting it in Tomcat since I already have the authentication extracted and base64 decoded with this at the top:
<%@page language="java"%>
<%@ page import="com.Ostermiller.util.Base64 " %>
<%
String auth = request.getHeader("Authorization");
 auth = auth.substring(auth.indexOf(" "));
 String decoded = new String(Base64.decode(auth));
 int i = decoded.indexOf(":");
 String username = decoded.substring(0,i);
 String pwd = decoded.substring(i+1,decoded.length());
%>
Then it has a form with a field checker and then login function:
function do_login()
if (is_ie)
window.document.authenticate.submitbutton.click();
else
window.document.authenticate.submit();
<form method="post" name="authenticate" onsubmit="return check_fields();">
Log in
I was wrong about the cookie. It doesn't set it in that html file, it just checks to see if a cookie exists, if it does, it passes the user through. Normally I would use a cookie bean to do this, but again I have to do this for multiple sites which have different values and encryption. I just want to pass the credentials through and then let the back end do the rest. Do you know of a better way? Thanks for replying.

Oracle J2EE container, Web Layout, JSP, Tomcat

Please help me with the next questions:
1)Oracle DB server and Oracle J2EE container are located in different places. The jsp in Oracle report web layout was generated. I put this JSP on the Oracle J2EE container and tried to run this jsp:
http://localhost:port/reports/weblayout.jsp and got the next error:
javax.servlet.jsp.JspException
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:341)
     at groups.jspService(_groups.java:55)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Do I need to deploy this jsp on Oracle J2EE container and if yes in what way?
2)can I run this jsp in Tomcat?
Thank you.

hello,
reports JSPs need the report server environment availabel and can not be deployend to a vanilla J2EE container. you can take a look at our "Tools" section of the reports page here on OTN (go to the reports homepage and click on the "search" link in the news section. there you can look for "tools and utilities" which contain instructions on how what you need to do. keep in mind though, that this is not a supported configuration. the only way to deploy a reports JSP is inside the J2EE container of the EE edition of the appliation server.
at this point we do not provide any instruction for other, non oracle, containers.
thanks,
ph.

JSP + Tomcat start problems

Hi all ,sorry fot desturbing with question that was descused befoure but I have problem to start JSP application on Tomcat server
1.I have created folder named my_folder and set my application here
2.I have created subfolder WEB-INF (but its empty because I want only to test deployment on Tomcat and I have only one file my_application.jsp)
3. I have restarted the server
4.I have typed in browser http://localhost:8080/my_folder/my_application.jsp
And it doesnt work show me error 404
Please somebody who can help with solving of this problem to write here
10x.

Try putting a basic web.xml file into the web-inf folder
Tomcat 4
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
 PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
 "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Welcome to Tomcat</display-name>
</web-app>Tomcat 5
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
 version="2.4">
<display-name>Welcome to Tomcat</display-name>
</web-app>

JSP - Tomcat Setting/Configuration

Similar Messages

Maybe you are looking for