JTextPane: scroll with wheel when using addMouseWheelListener()

Hello! I have JTextPane with code (code editor) with busy mouseWheelListener() which is used to increase/decrease font size when Ctrl key is hold. I think I overwrite default wheelListener behavior, so it is impossible to scroll text with a wheel. How can I do that?
My code is below:
JTextPane editor = new JTextPane();
editor.addMouseWheelListener(new MouseWheelListener() {
            public void mouseWheelMoved(MouseWheelEvent e) {
                if (e.getModifiers() == InputEvent.CTRL_MASK) {
                    int notches = e.getWheelRotation();
                    Component originator = e.getComponent();
                    float prevFontSize = originator.getFont().getSize();
                    if (notches < 0) {   //if UP then descrease font size
                        if (prevFontSize > 12.0f)
                        originator.setFont(originator.getFont().deriveFont(prevFontSize - 2));
                    else {  //if DOWN increase
                        originator.setFont(originator.getFont().deriveFont(prevFontSize + 2));
JScrollPane editorWithScrolls = new JScrollPane(editor);
//...nothing happens when I scroll mouse wheel...
How can I scroll text with mouse wheel in my case?
P.S. May be anybody knows how to scroll and set caret to given line(word)?
Thank you.

the textpane processes the event before it gets to the scrollpane.
you need to "pass it on"
                    else {  //if DOWN increase
                        p.setFont(originator.getFont().deriveFont(prevFontSize + 2));
                [scrollpane].dispatchEvent(e);//<--------------------------
        });

Similar Messages

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • Problem with SDO_relate when using polygons with holes.

    I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
    When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
    The query :
    SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
    returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
    I did a test with the following query and the result is 1422 (which is the good result).
    SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
    It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
    My question are :
    Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
    Is there a known problem with SDO_RELATE when using a polygon with holes in it?
    Do you have any idea how to solve my problem.

    Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.

  • CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there

    CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there a way around this?  Is there a patch to correct it?

    To build CD's???
    What problem does Encore have with DL?
    If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

  • Why do I get a spinning wheel when using Mail

    Recently I have noticed that I get the rainbow spinning wheel when using Mail.
    I have upgraded to Mavricks
    This seems to happen when looking for an address
    Also when I attempt to move emails from inbox to another mailbox this does not happen.

    A general cure for Mail problems is Mailbox > Rebuild.  Don't know if it applies to your problem but it shoud not hurt. 
    P.S.  Have a current Time Machine or other backup before attempting any major software updates or rebuilds.

  • Pages scroll extremely slowly when using my mouse scroll wheel, regardless of the settings I have for autoscrolling or smooth scrolling.

    It scrolls about 1 line for every 5 notches I turn the scroll wheel.
    I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
    Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

    It scrolls about 1 line for every 5 notches I turn the scroll wheel.
    I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
    Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

  • Problems with keywords when using 2 directories.

    Pardon my french, I'm Norwegian...  ;-)
    I have LR3.6 and have a folder structure I'm pleased with, I also use keywords on the images.
    I want one directory with B/W and one in color, in order to work in a directory where only B/W images appear. I think it's easier to see the images that work in B/W this way...
    I have copied the LRCAT file into a new folder. When I open LR I choose the directory to be loaded, B/W or Color. This works OK. When importing new pictures I copy images into the desired directory (eg. Colors?) with the Default Develop settings. When I use the B/W directory I sync the Color directory with the B/W Default Develop settings.
    I've imported the same Keyword list in both directories, but the problem is that the keywords are not included on the pictures when I sync. The images have the same filename so it should be possible to retrieve / sync keywords as well?
    Is there anyone out there who can help me, either with another solution where I do not need 2 directories or how I can import keywords to the other directory?

    My Lords, Kings and Gurus!
    dj_paige and johnbeardy:  I'm impressed with your quick and accurate response and I'm grateful for all the help. I hope I have not offended anyone here. In our local photoclub we have one guy that is almost as good as you guys. I don't know him but I think his name is Scott Kel... or somthing like that....  
    Have a nice day!

  • Problems with COLOUR when using "save as".

    Running on Mac, get dulled out and purple colour tone when using "Save As".  When using "Save for Web.." colours are OK.  Colour profiles and images coming into Raw are set as sRGB. Can anyone help??   I do have to convert to 8 bit to save as JPG.  Any help appreciated.

    The Print version is what a ProPhoto file looks like when viewed as if it was sRGB - i.e. in a non-color managed application. So there's still a ProPhoto profile here.
    Here you can see how the colors shift by going between sRGB and ProPhoto (using assign and/or convert). Your original is in the middle. You can see it's the very same color shift:
    If you convert to sRGB and you still get the same outcome, which you shouldn't, maybe the preferences are corrupt. Or maybe user error and you still have ProPhoto embedded.

  • Devtools update causes problems with sudo when used in a script?

    I'm a little confused by this one, but I'm not convinced that it's a bug.. yet.
    Long story short, I compile packages using the ABS via a script/wrapper which uses devtools. The script is available here: https://github.com/WorMzy/compilepackage
    Now, this script is far from perfect, but has worked perfectly well (in various states of completeness) for the past year or so. However, with the recent update of devtools (20120720-1 => 20121013-1), my script fails to execute correctly. After entering the password when prompted (by sudo, at this line: https://github.com/WorMzy/compilepackag … tions#L107), the script terminates unexpectedly.
    Downgrading devtools "fixes" this problem, but I'm not sure if this is a bug in devtools, sudo, zsh, my script, or something else.
    Here is the full output from the compilation of "arch-install-scripts":
    build@sakura[pts/10]:~/builds/devtools$ . ~/.scripts/compilepackage arch-install-scripts
    ==> Downloading sources
    ==> arch-install-scripts directory already exist. Replace ? [Y/n]
    ==> Download arch-install-scripts sources
    receiving file list ... done
    sent 28 bytes received 70 bytes 39.20 bytes/sec
    total size is 656 speedup is 6.69
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    there is nothing to do
    ==> Building in chroot for [extra] (x86_64)...
    ==> Creating clean working copy...done
    ==> Making package: arch-install-scripts 8-1 (Fri Oct 19 23:45:52 BST 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found arch-install-scripts-8.tar.gz
    -> Found arch-install-scripts-8.tar.gz.sig
    ==> Validating source files with md5sums...
    arch-install-scripts-8.tar.gz ... Passed
    arch-install-scripts-8.tar.gz.sig ... Passed
    ==> Verifying source file signatures with gpg...
    arch-install-scripts-8.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
    ==> WARNING: Warnings have occurred while verifying the signatures.
    Please make sure you really trust them.
    ==> Extracting Sources...
    -> Extracting arch-install-scripts-8.tar.gz with bsdtar
    ==> Starting build()...
    make: Entering directory `/build/src/arch-install-scripts-8'
    GEN arch-chroot
    GEN genfstab
    GEN pacstrap
    make: Leaving directory `/build/src/arch-install-scripts-8'
    ==> Entering fakeroot environment...
    ==> Starting package()...
    make: Entering directory `/build/src/arch-install-scripts-8'
    install -dm755 /build/pkg/usr/bin
    install -m755 arch-chroot genfstab pacstrap /build/pkg/usr/bin
    install -Dm644 zsh-completion /build/pkg/usr/share/zsh/site-functions/_archinstallscripts
    make: Leaving directory `/build/src/arch-install-scripts-8'
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package...
    -> Generating .PKGINFO file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: arch-install-scripts 8-1 (Fri Oct 19 23:45:54 BST 2012)
    ==> Installing package arch-install-scripts with pacman -U...
    loading packages...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): arch-install-scripts-8-1
    Total Installed Size: 0.03 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [######################################################################] 100%
    (1/1) loading package files [######################################################################] 100%
    (1/1) checking for file conflicts [######################################################################] 100%
    (1/1) installing arch-install-scripts [######################################################################] 100%
    resolving dependencies...
    looking for inter-conflicts...
    Targets (5): elfutils-0.155-1 pyalpm-0.5.3-2 python-3.3.0-1 python-pyelftools-0.20-2 namcap-3.2.4-2
    Total Installed Size: 99.58 MiB
    Proceed with installation? [Y/n]
    (5/5) checking package integrity [######################################################################] 100%
    (5/5) loading package files [######################################################################] 100%
    (5/5) checking for file conflicts [######################################################################] 100%
    (1/5) installing python [######################################################################] 100%
    Optional dependencies for python
    tk: for tkinter
    sqlite
    (2/5) installing pyalpm [######################################################################] 100%
    (3/5) installing elfutils [######################################################################] 100%
    (4/5) installing python-pyelftools [######################################################################] 100%
    (5/5) installing namcap [######################################################################] 100%
    Checking PKGBUILD
    Checking arch-install-scripts-8-1-any.pkg.tar.xz
    arch-install-scripts W: Dependency bash included but already satisfied
    arch-install-scripts W: Dependency included and not needed ('coreutils')
    arch-install-scripts W: Dependency included and not needed ('pacman')
    arch-install-scripts W: Dependency included and not needed ('util-linux')
    ==> Compilation complete, installing...
    Password:
    loading packages...
    warning: arch-install-scripts-8-1 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): arch-install-scripts-8-1
    Total Installed Size: 0.03 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n] % build@sakura[pts/10]:~/builds/arch-install-scripts$
    That "%" is inverted, just like what you get when you run
    echo -n "text"
    in zsh. Incidentally, here is my .zshrc: https://github.com/WorMzy/Config-files/ … ter/.zshrc, however, the problem persists with a new user with an unconfigured zsh.
    Here is my sudoers too:
    ## sudoers file.
    ## This file MUST be edited with the 'visudo' command as root.
    ## Failure to use 'visudo' may result in syntax or file permission errors
    ## that prevent sudo from running.
    ## See the sudoers man page for the details on how to write a sudoers file.
    ## Host alias specification
    ## Groups of machines. These may include host names (optionally with wildcards),
    ## IP addresses, network numbers or netgroups.
    # Host_Alias WEBSERVERS = www1, www2, www3
    ## User alias specification
    ## Groups of users. These may consist of user names, uids, Unix groups,
    ## or netgroups.
    # User_Alias ADMINS = millert, dowdy, mikef
    ## Cmnd alias specification
    ## Groups of commands. Often used to group related commands together.
    # Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
    # /usr/bin/pkill, /usr/bin/top
    ## Defaults specification
    ## You may wish to keep some of the following environment variables
    ## when running commands via sudo.
    ## Locale settings
    # Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
    ## Run X applications through sudo; HOME is used to find the
    ## .Xauthority file. Note that other programs use HOME to find
    ## configuration files and this may lead to privilege escalation!
    # Defaults env_keep += "HOME"
    ## X11 resource path settings
    # Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
    ## Desktop path settings
    # Defaults env_keep += "QTDIR KDEDIR"
    ## Allow sudo-run commands to inherit the callers' ConsoleKit session
    # Defaults env_keep += "XDG_SESSION_COOKIE"
    ## Uncomment to enable special input methods. Care should be taken as
    ## this may allow users to subvert the command being run via sudo.
    # Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
    ## Uncomment to enable logging of a command's output, except for
    ## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
    # Defaults log_output
    # Defaults!/usr/bin/sudoreplay !log_output
    # Defaults!/usr/local/bin/sudoreplay !log_output
    # Defaults!/sbin/reboot !log_output
    Defaults timestamp_timeout=0,passwd_timeout=0,passprompt="Password:",badpass_message="Incorrect password",editor=/usr/bin/vim:/usr/bin/vi,targetpw
    ## Runas alias specification
    ## User privilege specification
    root ALL=(ALL) ALL
    build sakura=/usr/bin/pacman-color -U *,/usr/bin/pacman-color -Sy,/usr/bin/pacman-color -Syy
    build sakura=/usr/bin/pacman -U *
    build sakura=NOPASSWD: /usr/bin/extra-x86_64-build,/usr/bin/multilib-build,/usr/sbin/makechrootpkg
    ## Uncomment to allow members of group wheel to execute any command
    %wheel sakura=(ALL) ALL
    ## Same thing without a password
    #%wheel ALL=(ALL) NOPASSWD: /sbin/sdshutdown, /sbin/sdreboot
    ## Uncomment to allow members of group sudo to execute any command
    # %sudo ALL=(ALL) ALL
    ## Uncomment to allow any user to run sudo if they know the password
    ## of the user they are running the command as (root by default).
    # Defaults targetpw # Ask for the password of the target user
    # ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
    ## Read drop-in files from /etc/sudoers.d
    ## (the '#' here does not indicate a comment)
    #includedir /etc/sudoers.d
    Further information will be provided on request. Suggestions for improving the script will also be appreciated.
    Thanks.

    Update: It appears that the cause is systemd's nspawn. Disabling it in mkarchroot (have_nspawn=0) resolves the problem.
    However, I don't understand why it's causing this behaviour. User input works fine for the sudo password prompt, but then fails for the pacman user prompt? Do they use different input buffers or something? Does that question even make sense?
    Anyway, I'll open a bug report on flyspray and upstream about this when I get the chance.

  • Hiss with 5G when using SoundDock or similar ONLY when Backlight OFF

    I've found this problem on two 30gig 5G iPods and I think it may be present on all.
    -If battery is full (completely)
    -If backlight is OFF
    -iPod connected to a set of speakers via dock connecter AND the speakers control the volume, not the wheel on the iPod
    Then, in quiet sections of music there is a noticable hiss from the speakers. This disappears as soon as the backlight goes on. Also not present if the iPod is charging (rather than charged already).
    It happens on my Bose SoundDock and Belkin Auto Kit.
    Also tried it on Kensington SX 2000 in an Apple Store - Same problem.
    As a consequence the Apple store replaced my iPod. Now I've worked out about the battery, I think it is prenent on all 5G iPods, as it started on the replacement iPod as soon as it was fully charged.
    Thoughts.....
    AMD-PC   Windows XP Pro  

    Hmmm, interesting thought Jon,
    In my case it would be 50Hz Hum as I'm on the other side on the Atlantic.
    Would you get such interference in a car though? I get the same problem with my Belkin Auto kit. This is basically a cig power adaptor with a small preamp in it. It connects to the dock connector and takes the line level audio, and preamps it and sends it to a 3.5mm jack that you connect your audio tape adaptor to. Same issue - hum/hiss with backlight OFF only when unit fully charged.
    I've just taken to leaving my iPod not to turn off the screen, as I most use it powered.
    Submitted the feedback as you suggested.

  • Oracle 11.1.0.7.0 Issue with Streams when using NULL value in a key field

    Hi,
    we have an issue in our replicated environment using Streams.
    We have a replicated table using the following index:
    UK_S01_TEXT_FORMAT_TBL01 SOGID
    UK_S01_TEXT_FORMAT_TBL01 INDEX_TEXT_FORMAT_ID
    UK_S01_TEXT_FORMAT_TBL01 INDEX_LANGUAGE_LABEL
    UK_S01_TEXT_FORMAT_TBL01 INDEX_TEXT_FORMAT_COUNTER
    UK_S01_TEXT_FORMAT_TBL01 INDEX_PROVIDER_ID
    UK_S01_TEXT_FORMAT_TBL01 INDEX_TARIFF_PLAN_COSP_ID
    with field INDEX_PROVIDER_ID allowing NULL values. Actually we insert empty strings in there, but as far as I understand Oracle will convert it sliently in a NULL value, which is fine to our application.
    When we apply a change on that table (either update or delete) we get errors at streams level and the transaction is not propagated.
    Local Transaction ID: 6.28.11170
    Source Commit SCN: 25397175
    Source Commit Time: Dec-03-2012 12:21:30
    Error in Message: 1
    Error Message: ORA-26787: The row with key ("INDEX_LANGUAGE_LABEL", "INDEX_PROVIDER_ID", "INDEX_TARIFF_PLAN_COSP_ID", "INDEX_TEXT_FORMAT_COUNTER", "INDEX_TEXT_FORMAT_ID", "SOGID") = (ITALIAN, , , 0, MIKE, 124) does not exist in table
    SMS.S01_TEXT_FORMAT_TBL
    ORA-01403: no data found
    message: 1
    TableName: S01_TEXT_FORMAT_TBL
    Operation Type: DELETE
    _____ Old Data _____
    SOID : 1010000008
    SOGID : 124
    INDEX_TEXT_FORMAT_ID : MIKE
    INDEX_LANGUAGE_LABEL : ITALIAN
    INDEX_TEXT_FORMAT_COUNTER : 0
    TEXT_FORMAT : Hai raggiunto i 100MB di traffico incluso nello scatto
    APPLICA_PERIOD_CRI_ID :
    INDEX_TARIFF_PLAN_COSP_ID :
    INDEX_PROVIDER_ID :
    If I force the set of primary keys to be only the NOT NULL fields, I can successfully apply the error, but since we may have them storing both NULL and NOT NULL values, this is not a solution.
    I'm wondering why the DB on one hand converts the empty string in a NULL while inserting, but it looks the Apply process onStandby is not able to do the same when looking for the record before applying the transaction.
    Thanks in advance!
    Cheers,
    Mike

    Its showing all objects the user has permission to see- why does that need to be restricted?

  • Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

    I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
    Hi David (00)... Thanks for your reply. I just wanted to let you know
    that I am going to post all of this correspondence on as many Creative
    forums that I can find in hopes of finding someone that help with this
    problem.
    I will advise you of the results
    Thanks again...Bill Allen
    ----- Original Message -----
    From: "Creative Americas Customer Support"
    To: "Bill Allen"
    Sent: Saturday, February , 2006 :39 AM
    Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
    and Adobe Audition) (KMM987992I6636L0KM)
    > Sir,
    >
    > The only time that I've see a random tone being generated as you
    > decribe, it was necessary to update the system bios to correct.
    >
    > While we are able to playback and record with the card and it's included
    > software, Adobe continues to not allow you to monitor what you're
    > recording. As best we can tell, there's nothing wrong with the card and
    > I would urge you to check with Adobe for any "monitor recording"
    > switches that may be in their software.
    >
    > For faster service please reply with previous correspondence when
    > replying to this email.
    >
    > Best Regards
    > ,
    >
    > David (00)
    > Team Specialist
    >
    > Technical Support
    > Creative Labs Americas
    >
    >
    >
    > To provide feedback on your "Creative Experience" please click on the
    > following link:
    >
    Link removed
    >
    > This link is provided so that you may provide feedback on your "Creative
    > Experience". If you require further troubleshooting or have additional
    > questions simply reply to the original mail and we will be glad to
    > assist you.
    >
    > Original Message Follows:
    > ------------------------
    > Jeen... I appreciate, very much, your reply. But I don't appreciate
    > trying
    > to be 'ping ponged' back and forth between Creative and Adobe. While I
    > realize that you can only deduce a solution from what I tell you, I
    > believe
    > that if you re-read my description of the problem you will realize that
    > the
    > problem is with the sound card and it's associated software. Otherwise
    > why
    > would the system work as expected when it it turned on the next morning?
    >
    > I would also like to know where the 'tone' comes from. When recording
    > video segment (with audio) through the firewire connection of the
    > Creative Audidgy 2ZS card, after a short while the audio is replaced with a
    > constant tone (as I said, it is about 200 Hz). If I record the video thru the
    > Firewire connection and the audio through the 'Line-In' connection,
    > there is no problem with the recording the audio track 'tone free'. However,
    > sometimes but not always, when the audio is played back the tone will
    > appear. This has happened with both Adobe Premeire Pro .5 and Adobe
    > Audition. It is not in the audio track of Adobe Premeire Pro .5 or
    > Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
    > it's associated software. I'm sure your audio engineers have knowledge of
    > this problem and I would appreciate an answer.
    >
    > Thanks...Bill Allen
    >
    > ----- Original Message -----
    > From: "Creative Americas Customer Support"
    >
    > To: "Bill Allen"
    > Sent: Friday, February 0, 2006 2:5 AM
    > Subject: Re: Creative System Information (English : Adobe Premeire Pro
    > .5
    > and Adobe Audition) (KMM9780I6636L0KM)
    >
    >
    >> Dear Bill,
    >>
    >> Thank you for replying back to Creative Technical Support.
    >>
    >> With regards to your issue, I understand that you are having
    > difficulty
    >> getting the audio to record from the applications Adobe Premiere Pro
    > .5
    >> and therefore not sound during the playback.
    >>
    >> As you have verified that the sound card is working properly with the
    >> other applications on recording or playback, this could be due to the
    >> improper setup for the audio in the Premiere Pro .5.
    >>
    >> You may like to refer to Adobe for assistance on the configuration of
    >> the audio settings as we are not in a better position to advise you on
    >> third party software.
    >>
    >> Should you have not sound or issues with our software, please feel
    > free
    >> to contact us so that we can assist you.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Jeen
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    > "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> Ronshone... Thanks for your reply.
    >>
    >> Here is the information you requested:
    >>
    >> Sound Blaster Audigy 2ZS
    >> PID: 0 03 50 00 00 00 02
    >> Driver Ver: 2.8.4
    >> Firmware : 0.0.0
    >> Model: SB.0350
    >> Serial Number: MSB0350472004288E
    >> Ink stamp: 50SPT470D
    >>
    >> The Audigy 2ZS is the only sound card installed
    >> The Audigy 2ZS card is at least one slot away from the graphics card.
    >> The Audigy 2ZS card is one slot away from another card.
    >> The Audigy 2ZS card is properly seated in the PCI slot.
    >> The PC's internal wires have been moved away from the Audigy 2ZS card
    > .
    >> The 'on-board' sound is disabled thru the BIOS.
    >> The 'on-board' game port is disabled thru the BIOS.
    >> The XP Pro operating system is up to date with all updates.
    >> There were no background operation going at the time of the tests.
    >> The anit-virus program was closed
    >> The CPU is not overclocked.
    >> And, I am the Administrator.
    >>
    >> The card came in a Creative retail Box along with the input unit that
    >> mounts
    >> in the dri've bay. I can't recall what that is called.
    >>
    >> I have relocated the sound card to a slot that is 4 slots away from
    > the
    >> graphics card and slot away from another card, in this case an
    >> additional
    >> IDE dri've controller.
    >>
    >> I have performed the test you outlined. I found that I had to record
    >> using
    >> the 'line in' source input. And I had to playback using the 'wave'
    >> source.
    >> As far as that test is concerned, everything worked. However when I
    >> bring
    >> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
    >> even
    >> though the audio meters in Premeire Pro in indicate that there is
    > audio
    >> playing from the audio track on playback, I hear nothing from the
    >> speakers.
    >>
    >> I then brought up the Creative Speaker Settings requester and did a
    >> diagnostic test. All tests indicated "pass". But when I click on the
    >> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
    >> should
    >> add that in both mixers, the Creative Surround Mixer and the Play
    >> Control
    >> mixer, all inputs and outputs are selected (not muted). Also when I
    >> performed this same test yesterday the 'Speaker Test' worked fine.
    >>
    >> On rebooting, the 'Windows XP' sound is heard from the speakers.
    >> Bringing
    >> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
    >> Test'
    >> in the Creative Surround Mixer also worked as expected.
    >>
    >> I then recorded the rest of my program using the Adobe Premeire Pro
    > .5
    >> 'Capture' requester and when I tried to playback from within Adobe
    >> Premeire
    >> Pro .5 all I got was a constant tone (about 200 Hz), even though the
    >> audio
    >> meters in Adobe Premeire Pro .5 indicated that the audio was good and
    >> had
    >> no constant tone.
    >>
    >> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
    >> program. Without making any changes to either mixers, Adobe Premeire
    > Pro
    >> .5
    >> performed, and the sound played, as expected. In the 'Play Control'
    >> mixer
    >> only the 'wave' was acti've. All the rest were muted. It was the same
    >> for
    >> the 'Creative Surround Mixer'.
    >>
    >> I am at a loss as to what the problem is. Any help would be
    >> appreciated.
    >>
    >> ...Bill Allen
    >> ----- Original Message -----
    >> From: "Creative Americas Customer Support"
    >> @customercare.creative.com
    >> To: "Bill Allen"
    >> Sent: Monday, February 06, 2006 9:42 PM
    >> Subject: Re: Creative System Information (English : Adobe Premeire Pro
    >> .5
    >> and Adobe Audition) (KMM933384I6636L0KM)
    >>
    >>
    >> Dear Bill,
    >>
    >> Thank you for contacting Creative Technical Support.
    >>
    >> With regards to the issue you are having, I would really appreciate it
    >> if you can provide me with the model number of the sound card. It
    >> should
    >> start with CT or SB followed by 4 numbers found on the sound card. I
    >> also need the serial number which can be found on the sticker and the
    >> ink stamp which is printed on the back of the card. This number will
    >> not
    >> be located on any of the stickers and it will not be labeled. It is a
    >> number that has been stamped on the card itself, possibly near the
    >> outer
    >> edge of the card to determine the best advice for you.
    >>
    >> Did the sound card come pre-installed in the PC, comes in a plastic
    >> cover or brown box or did it come in a Creative retail box package?
    >>
    >> Below is a link that may help with the location of the model number.
    >>
    >> Run a keyword search for SID2456 from the link below.
    >>
    Link removed
    >>
    >> I also need you to try the following recording test.
    >>
    >> SELECT THE RECORDING SOURCE IN SURROUND MIXER
    >> . Go to Start Programs Creative SB Audigy Surround Mixer
    >> 2. Click on the Recording Source (should be on the right side of the
    >> mixer under the REC label)
    >> 3. Change the recording source to Analog Mix
    >> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
    >> speaker) that you don't want recorded with the audio stream.
    >> 5. You may wish to select "record without monitoring" by click on the
    >> (+) above the Analog Mix recording source. This keeps the source from
    >> playing out to speakers while recording
    >>
    >> TEST RECORD THE AUDIO
    >> . Go to Start Programs Accessories Multimedia Sound Recorder.
    >> 2. Click the Record button (red dot)
    >> 3. Talk into the microphone
    >> 4. Let it record the source for a little bit
    >> 5. Hit the Stop button (black square)
    >> 6. Hit the play button (single arrow pointing right)
    >> 7. You should now hear the audio that you recorded.
    >>
    >> If you are still having issues, I recommend you to ensure the
    > following
    >> for the audio installation and test:
    >>
    >> - The card is the only card installed other than the Graphics card.
    >> - The card is at least one empty slot away from the Graphics card.
    >> - Place the soundcard away from all the others.
    >> - That the card is seated properly in the PCI slot.
    >> - Move the PC's internal wires away from the soundcard.
    >> - That the on-board sound on your motherboard is disabled through the
    >> BIOS.
    >> - That the on-board gameport is disabled through the BIOS.
    >> - That your motherboard BIOS is up-to-date.
    >> - That the operating system is up-to-date with the latest service
    > packs
    >> and patches.
    >> - That there are no background applications open when you attempt the
    >> solution.
    >> - That the anti-virus program is disabled.
    >> - That if you are over-clocking your system, return all options to
    >> their
    >> recommended settings.
    >> - That you access the PC with administrator rights.
    >>
    >> Do reply back to me if you are still having problems with any error
    >> messages prompted. Thanks.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Ronshone
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    >> "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> User Detail
    >> ----------------------------------------
    >> Name : Bill Allen
    >> Email Address : [email protected]
    >> Self Description : Intermediate PC User
    >>
    >> Creative Product Information
    >> ----------------------------------------
    >>
    >> Problem Type : I need help with a third-party software application
    >>
    >> Problem lies with:
    >> ----------------------------------------
    >> Adobe Premeire Pro .5 and Adobe Audition
    >>
    >> Customer's System Specification
    >> ----------------------------------------
    >>
    >>
    >> Detailed Problem Description
    >> ----------------------------------------
    >> I can hear sound from my computers speakers. The diagnostic tests
    >> performed by the Creative software are all "OK", but I cannot record
    >> audio with either of the two programs mentioned above. I have checked
    >> everything I can think of and all of the settings appear to be "OK".
    > I
    >> have also updated the driver for the sound card. What can I do?
    >>
    >> Attachment :
    >> [ Attachment Type: application/octet-stream Name: CTSi.cab]

    TeamRacing6 wrote:
     b noir,
    I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
    I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
    Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

  • Cannot connect to the Internet with browser when using VPN

    I am experiencing an odd network problem and am hoping that someone on this list has seen something similar and can help me isolate the cause.
    I have a Mac Pro running Mac OS X (10.5.8) and use Cisco's VPNClient to connect to my employer's network. Some time in the last year I started getting this odd behavior wherein that while connected via VPN, I cannot open external web pages in Safari (Version 5.0 (5533.16)). When this happens I get the following message:
    +Safari can't open the page "http://www.google.com/" because your computer isn't connected to the Internet.+
    Web pages on the company's internal network work fine. Firefox exhibits the same problem. However, the very odd thing (to me), is that I can get to the Internet using the browser in NetNewsWire. Other services (like twitter) also seem to work fine.
    The problem is intermittent and occurs between restarts. After some restarts the problem is not there. Also, connecting and re-connecting via VPNClient does not affect the behavior. If access to the Internet is working then it will continue working, at least until the next restart. If I restart for whatever reason (software update, etc.) the next time it may or may not work.
    This has been going on over several updates to Mac OS X and Safari.
    Another clue is that my MacBook, also running 10.5.8 works fine when connected from the same home network so I am pretty sure the problem is with my Mac Pro.
    Anyone out there have any idea what could be causing this and how to go about fixing the problem?
    Thanks in advance,
    KP

    Earthlink can be challenging. Have a look at this
    very helpful post from Eme.
    This may lead you in the right direction.
    World leaks relates to memory issues with Safari that
    are on-going and being addressed in the developer's
    community. More information can be found
    here.. To
    stop the warning message, go to your Debug menu and
    deselect "always check for world leaks".
    iMac G5 Rev C 20" 2.5gb RAM 250 gb
    HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac
    OS X (10.4.8) LaCie 160gb d2 HD Canon i960
    printer
    I couldn't fix it, and the Earthlink technician couldn't fix it...until she checked and found that the starting address: "www.my.earthlink.net" is down. In fact, it's still down, so I'll just continue using Foxfire for awhile. I can connect by typing "www.earthlink.net" in the addres bar, but it's so much easier to just click on Foxfire in my dock. This shows the value of having a spare browser.
    I'm going to mark it "solved. Thanks for your help, It was a bit technical for me, but I tried. I had to, having just sent an article about the value of persistence to a friend, how could I fail to persevere?

  • Problem with gui_download when using DBF FILE type.

    Good Day Experts.
    I am trying to download excel file using function module  GUI_DOWNLOAD.
    declared  a table it_string type table string.
    initially I  appending my header to it_string. and then passing  my internal table to it  .
    this is how I am passing data into it_string.
    so in gui_download I am passing parameters as below. but I am not getting data into the excel file.
    I tried both ways passing field separator  as 'X' and '#'.
    please guide me where I am wrong.

    Hello Surendra,
    Can you please upload your code sample. Thanks.
    What i manage to find is using this function module  WS_DOWNLOAD.
    The file is downloaded in the directory -->  C:/
    Here is the code sample :
    TABLES: usr03,dd02l.
    DATA: zx030l LIKE x030l.
    DATA BEGIN OF zdfies OCCURS 0.
             INCLUDE STRUCTURE dfies.
    DATA END OF zdfies.
    DATA: BEGIN OF flditab OCCURS 0,
           fldname(11) TYPE c,
           END OF flditab.
    DATA itabusr03 LIKE usr03 OCCURS 0 WITH HEADER LINE.
    DATA tname LIKE dd02l-tabname.
    SELECT * FROM usr03 INTO TABLE itabusr03.
    tname = 'USR03'.
    PERFORM getfieleds.
    PERFORM dwdbffile.
    FORM getfieleds.
       CALL FUNCTION 'GET_FIELDTAB'
         EXPORTING
           langu               = sy-langu
           only                = space
           tabname             = tname
           withtext            = 'X'
         IMPORTING
           header              = zx030l
         TABLES
           fieldtab            = zdfies
         EXCEPTIONS
           internal_error      = 01
           no_texts_found      = 02
           table_has_no_fields = 03
           table_not_activ     = 04.
       CASE sy-subrc.
         WHEN 0.
           LOOP AT zdfies.
             flditab-fldname = zdfies-fieldname.
             APPEND flditab.
           ENDLOOP.
         WHEN OTHERS.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH  sy-subrc.
       ENDCASE.
    ENDFORM.                    "GETFIELEDS
    FORM dwdbffile.
       CALL FUNCTION 'WS_DOWNLOAD'
         EXPORTING
    *      filename                = 'C:\USR03.DBF'
           filename                = 'C:\USR03.XLS'
           filetype                = 'DBF'
         TABLES
           data_tab                = itabusr03
           fieldnames              = flditab
         EXCEPTIONS
           file_open_error         = 1
           file_write_error        = 2
           invalid_filesize        = 3
           invalid_type            = 4
           no_batch                = 5
           unknown_error           = 6
           invalid_table_width     = 7
           gui_refuse_filetransfer = 8
           customer_error          = 9
           OTHERS                  = 10.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    ENDFORM.                    "DWDBFFILE
    Thanks and Kind Regards,
    Yovish.

  • Jvm startup fails with error when using large -Xmx value

    I'm running JDK 1.6.0_02-b05 on RHEL5 server. I'm getting error when starting the JVM with large -Xmx value. The host has ample memory to succeed yet it fails. I see this error when I'm starting tomcat with a bunch of options but found that it can be easily reproduced by starting the JVM with -Xmx2048M and -version. So it's this boiled down test case that I've been examining more closely.
    host% free -mt
    total used free shared buffers cached
    Mem: 6084 3084 3000 0 184 1531
    -/+ buffers/cache: 1368 4716
    Swap: 6143 0 6143
    Total: 12228 3084 9144
    Free reveals the host has 6 GB of RAM, approximately half is available. Swap is totally free meaning I should have access to about 9 GB of memory at this point.
    host% java -version
    java version "1.6.0_02"
    Java(TM) SE Runtime Environment (build 1.6.0_02-b05)
    Java HotSpot(TM) Server VM (build 1.6.0_02-b05, mixed mode)
    java -version succeeds
    host% java -Xmx2048M -version
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    java -Xmx2048M -version fails. Trace of this reveals mmap call fails.
    mmap2(NULL, 2214592512, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = -1 ENOMEM (Cannot allocate memory)
    Any ideas?

    These are the relevant java options we are using:
    -server -XX:-OmitStackTraceInFastThrow -XX:+PrintClassHistogram -XX:+UseLargePages -Xms6g -Xmx6g -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=128m -XX:MaxPermSize=192m -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+ExplicitGCInvokesConcurrent -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.awt.headless=true
    This is a web application that is very dynamic and uses lots of database calls to build pages. We use a large clustered cache to reduce trips to the database. So being able to acces lots of memory is important to our application.
    I'll explain some of the more uncommon options:
    We use the Concurrent Garbage collector to reduce stop the world GC's. Here are the CMS options:
    -XX:+UseConcMarkSweepGC
    -XX:+CMSClassUnloadingEnabled
    -XX:+CMSPermGenSweepingEnabled An explicit coded GC invokes the Concurrent GC instead of the stop the world GC.
    -XX:+ExplicitGCInvokesConcurrentThe default PermSizes where not large enough for our application. So we increased them.
    -XX:PermSize=128m
    -XX:MaxPermSize=192mWe had some exceptions that were omitting their stack traces. This options fixes that problem:
    -XX:-OmitStackTraceInFastThrowWe approximate between 10% to 20% performance improvement with Large Page support. This is an advance feature.
    -XX:+UseLargePagesUseLargePages requires OS level configuration as well. In SUSE10 we configured the OS's hugepages by executing
    echo "vm.nr_hugepages = 3172" >> /etc/sysctl.confand then rebooting. kernel.shmmax may also need to be modified. If you use Large Page be sure to google for complete instructions.
    When we transitioned to 64bit we transitioned from much slower systems having 4GB of ram to much faster machines with 8GB of ram, so I can't answer the question of degraded performance, however with our application, the bigger our cache the better our performance, so if 64bit is slower we more than make up for it being able to access more memory. I bet the performance difference depends on the applications. You should do your own profiling.
    You can run both the 32bit version and the 64bit version on most 64bit OSes. So if there is a significant difference run the version you need for the application. For example if you need the memory use the 64bit version if you don't then use the 32bit version.

Maybe you are looking for

  • IPod Touch no longer showing up under My Computer

    My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it. It works in iTunes just fine, syncs fine, etc. If I go to Devices and Printers, it used to be listed under the Devices catego

  • MDS-00521 - error while reading the document  in Oracle ADF at Runtime

    Hi All, we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0 we are getting below error message while opening the page at run time. MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository. MDS-00569 : una

  • Can't open my InDesign CS6 documents

    All my saved doc will not open. I get the following message: Cannot open "name of doc.indde" because it was saved by a newer version of Adobe InDesign (CS7.0) I don't even have CS7...in fact does it even exist ? Plz help

  • Xml indexes in 11g

    i am using the oracle 11g. i need some examples how to use path index ie creating the table and creating the path index . i need examples on order index ,value index

  • JMS Web Service Sample (News service application)

    Hi, The Web service client (NewsServiceProxy) invokes send() and this calls NewsQueueEJB. Where do we define NewsQueueEJB to be used as Web service? Is it in config /etc? Does the Web Services assembly tool make than happen? Thanks, Mustafa