JTree doesn't scroll to selected node when out of scrollable view..

When ever I add a new item to the END of the tree and the tree is within a scrollpane, OR as I hit keys to navigate to items starting with the letter of the key I enter, the view is not scrolled into place. Any way to do this without custom code? If not, what sort of code does this? I am adding various listeners already for mouse drag/drop, editing, selection, etc.
Thanks.

After you do the expandPath or expandRow, whichever it is you are using in JTree, make sure you reload the your DefaultTreeModel. model.reload( ); Where DefaultTreeModel model;
Or (And) try validate( ) and repaint( );
One of those does it. I think the first. It's been awile.
Con

Similar Messages

  • Why doesn't Aperture rembmer thumbnail size when turning on/off viewer?

    I noticed that when I turn on/off the viewer by pressing V, the thumbnail in the browser will go back to the smallest size. Do I have a corrupted preference file or something like that?
    Am I the only one experiencing this annoying behavior?
    Thanks for any input.
    Chris

    Thanks for these suggestions.
    I have added the sites to the trusted sites in IE and that didn't help.
    Things are a bit more complicated with the global security settings of the flash player. When I click your link, I see the note (Note: The Settings Manager that you see above is not an image; it is the actual Settings Manager itself.), but no settings manager, so I cannot click any tabs. I can rightclick to go to global settings, but I can find no global security settings. A complicating factor is that I'm located in Poland and even though the installer correctly notes that I'm running an English language Windows system, it will only install flash player in Polish - and translations are usually not so good. So I have an "advanced" tab in the settings manager and I added my secure sites to the trusted sites, even though it says this is for programmers only. Anyway - this didn't help either.
    Please help, as this problem has cut me off from my bank account!

  • Change selected tab when move from one view to another

    Hi all,
    I have a tabbedviewnavigator application where I have 5 tabs in it. So, the first tab contains the first view of the application, e.g. HomeView. Inside this view, I have a button where upon clicking it, it will push to the second view which is sitting in the second tab.
    How do I change the selected tab index upon clicking the button? Because right now the selected tab is till on the first tab. Please help.
    Best regard,
    Victor

    When you set selected index of 2nd tab, try to set focus on of any control in 2nd tab. It might happen that if you don't set focus on of any control tab may not change.

  • Auto scrolling to a selected node in Tree

    Hi All,
    In my one of my flex application, i am selected nodes in a tree based on some input. However, if my tree is large and the selected node is at the bottom then i cant see what is selected until i scroll down. Is there any automatic way of scrolling to a node when that node is selected?
    Thanks.

    I have tried the following, but it is not working.
    Tree.scrollToIndex(Tree.selectedIndex);
    Any idea?

  • JTree doesn't refresh when adding node in a node

    Hello,
    I have a strange problem
    I have a JTree, with a root, and two nodes, which have nodes...
    I have one node that is expanded, and the other is collapsed.
    I made a method that enables me to add a sub node to the node selected by the mouse.
    If I select the collapsed node and use my "add" method, and then expand the node, the node is here. No problem.
    If I do the same thing on the expanded node, the tree doesn't seem to be willing to refresh. I can use some refresh(), expandPath()...and other methods to make it refreshed, but it doesn't care... is there some particular method that I must use, a listener that I must add to the tree....?
    Any help would be appreciated
    Thanks 4 help
    Philippe

    You need to call nodeStructureChanged(parentNode) on the model.

  • Change icon of a non selected node in JTree

    Hello
    I have a swing application contening a JTree.
    I'd like to know how to change the icon of a non selected node in my tree. I have the information about the node and its path. I try to change userObject information and the icon of the node with the setIcon of (DefaultMutableTreeNode), and reload the node (DefaultTreeModel) but it doesn't work.
    Do I have to set the change in my CellRenderer ?
    Any advice will be welcome
    Anne

    If you carefully look at the java tutorial tree, the change is made for all the leaf icon. What I want is to change the icon of a not selected node of my tree while I do other stuff with the other nodes like select, display their contents, drag them ...
    the operation of a not selected node is independant from the selection in the tree.
    So I still ask how to force a node to reload and take care of the change of his icon.
    Anne

  • How to select node in JTree without firing event?

    I have got standard situation. JTree in the left panel, and several edit boxes in right panel. Certainly, I have TreeSelectionListener, which on every tree node selection shows corresponding model values in edit boxes.
    I'd like to implement next logic:
    1. Something was changed in any edit box in right panel. Model has been changed.
    2. User clicks on different node in tree.
    3. Dialog "Message was not saved. Save?" with Yes/No/Cancel buttons are shown.
    Yes/No buttons are easy to handle.
    Question is about Cancel. I'd like on Cancel button left all edit boxes in their present state (do not restore values from saved model) and select back node, which wasn't saved.
    Problem is next. If I select node by setSelectionPath or smth like that, but... JTree fires event and my listener receives onTreeItemSelected back, which checks that node wasn't saved and ......
    Who does have any idea, or have done similar tasks? How can I select node and do not allow tree fire event this time?
    Thanks in advance.

    First, as soon as the model changes (when editing any
    combo box) some flag will be set. Now the logic which
    updates the combo boxes will do it only on a change of
    the current node and (this is new) if the flag wasn't
    set. You should have some flag anyway because somehow
    you must determine when to show the dialog, shouldn't
    you?Yes, I have got this logic implemented. But it's only the half :)
    I know exactly when my model has been changed, but if it was changed, i'd like to ask user what to do next - svae/loose changes/cancel
    And on cancel i'd like to select last edited tree node and do not get event from tree at that moment.
    >
    Second way, prevent selecting a new node if that flag
    has been set. You could do this by subclassing
    DefaultTreeSelectionModel and overriding some methods
    (setSelectionPath() et al).Ok. I'll investigate this.
    >
    MichaelThanks.

  • Coloring selected nodes in JTree

    i am currently using setCellRenderer() for highlighting a selected node in my JTree.but when i select another node, the previously selected node loses its highlight.i would like to know of how i could make the highlight in the selected nodes remain persistent.

    I am currently using DISCONTIGUOUS_TREE_SELECTION only. my requirement is that i should be able to select any number of nodes.so i use this selection.
    but at the same time, my highlight in selected nodes should be like a toggle-state.
    if i select an already selected node ( say A), the highlight has to go away.
    and at the same time, th highlight on previously selected nodes (say B, C) should be persistent.
    am currently using TreeSelectionListener. and for rendering am using SetCellRenderer.
    in this scenario, how could my work be accomplished?

  • Scrolling pane to view selected node

    I have a JTree which is inside of a JScrollPane. I sometimes use setSelectionPath(TreePath) to expand a particular Node, but usually it's outside of the viewing area so you don;t notice it. What's the easiest way to get the scroll pane to scroll so the newly selected node is visible?

    no problem! I haven't figured how to start that project yet... may take a while before I can find a way to do it. Hey thanks for the link, works great now

  • Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

    Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

    This article is for startup but it might help.  http://support.apple.com/kb/ts2570

  • How to restrict the selection of other nodes when we minimize previous node

    Hi ,
    I have requirement where i am displaying the data in tree view as result list.
    Here in the tree view i have  i base under that iobject and under that contract
    when i expand ibase node and select some iobjects and when i minimize the ibase now automatically next level ibase nodes are selected based on number of iobject selected in previous ibase node what i have selected.
    Any inputs plz help me.
    Regards,
    Neelam

    Hi,
       The selection is based on table row index. When you minimize a node in a tree, the selection will change as another node will come under that index number. You should redefine the select and prepare_output to
    1. Make note of selected nodes and store them in a table type attribute using either the "BO" if it's unique or the "node-key" as the key field. Also, remove deselected nodes from this table.
    2. During each round-trip, you shoud validate available rows against the previously said table and if they are available, show them as marked.
    Regards,
    Arun Prakash

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Xml in JTree: how to not collpase JTree node, when renaming XML Node.

    Hi.
    I'm writing some kind of XML editor. I want to view my XML document in JTree and make user able to edit contents of XML. I made my own TreeModel for JTree, which straight accesses XML DOM, produced by Xerces. Using DOM Events, I made good-looking JTree updates without collapsing JTree on inserting or removing XML nodes.
    But there is a problem. I need to produce to user some method of renaming nodes. As I know, there is no way to rename node in w3c DOM. So I create new one with new name and copy all children and attributes to it. But in this way I got a new object of XML Node instead of renamed one. And I need to initiate rebuilding (treeStructureChanged event) of JTree structure. Renamed node collapses. If I use treeNodesChanged event (no rebuilding, just changes string view of JTree node), then when I try to operate with renamed node again, exception will be throwed.
    Is there some way to rename nodes in my program without collpasing JTree?
    I'am new to Java. Maybe there is a method in Xerces DOM implementation to rename nodes without recreating?
    Thanks in advance.

    I assume that "rename" means to change the element name? Anyway your question seems to be "When I add a node to a JTree, how do I make sure it is expanded?" This is completely concerned with Swing, so it might have been better to post it in the Swing forum, but if it were me I would do this:
    1. Copy the XML document into a JTree.
    2. Allow the user to edit the document. Don't attempt to keep an XML document or DOM synchronized with the contents of the JTree.
    3. On request of the user, copy the JTree back to a new XML document.
    This way you can "rename" things to the user's heart's content without having the problem you described.

  • How could i get the selected node in the JTree

    getLastSelectedPathComponent() �returns the parent node of currenr selected, so how could I get the selected node itself in the JTree
    I will appretiate for any help!

    i think you can get by....
    TreePath treePath = tree.getSelectionPath();
    DefaultMutableTreeNode treeNode = (DefaultMutableTreeNode) treePath.getLastPathComponent();

  • JTree in JScrollPane doesn't scroll

    I have a JTree in a JScrollPane that doesn't scroll.
    Background: it used to!
    History: I moved the creation of the JTree to inside an Object that returns it with a ".getTree()" method. Since then, it hasn't been scrolling. I even set the JScrollPane to always have scrollbars and they just sit there inactive.
    Does anyone know what this would happen and/or how to fix it?
    thanks.

    That actaully worked, but it was way to big. I'm not sure what I did, but I changed the values to Studio ONE's defaults and now it works ok.

Maybe you are looking for