Jump in users session with control Server 2008 R2/Windows 7 64 Environment
For two hours I've searched and searched and can't find MY answer. My goal is to jump in and control workstations of my employees (a bunch of old farts that would blank out if they had to do anything to allow me to do this) without the use of VNCs or third
party installs. I'm running Active Dir. This is what I've done WITH THE NETWORK FIREWALL OFF:
installed the mmc Remote Desktop Services Manager
at root level I can only see my sessions automatically
I am remoted into Server 2008 R2 using this snap it to remote into Old Lady #1
I'm a member of:
--Administrators (for domain)
--Domain Admins
--Remote Desktop Users
When I add a computer to the MMC I get: "The computer can't be reached..."
Using GP, I pushed out a policy to the computers in that department the 2 firewall changes necessary
--One about allowing remote access for administration
--One about allowing remote desktop access
----I * the allowed computers until I figure this out, afterwards I will further restrict the "from" computers for security
I'm inches from thinking that what I want can only be done with VNCs or third party apps. I manage beach houses for a living and don't have time to spend like this on helping my old fogies OR walking all over 2 floors to help someone because the printer
is only printing black and white or "my mouse is too fast" or "how do find an email that I deleted"...
Is it possible for me to be all mighty and powerful and take control of my Win7 workstations without them doing anything more than pressing OK when I just in there session?
I don't like third party. I like everything Microsoft unless 100% unavoidable.
Thanks,
charlyRoot
You should use Remote Assistance and configure GPO for unsolicited access:
https://4sysops.com/archives/how-to-enable-unsolicited-remote-assistance-in-windows-7-8/
The Remote Desktop Services Manager is made for RD Session Host servers http://technet.microsoft.com/en-us/library/cc732985.aspx
Similar Messages
-
HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adilHi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil -
Vb6,adodb with sql server 2008
hi for i am new to vb6 with sql server 2008. I have managed to create database named : Tuscan77 in project folder with all the necessary tables with primary and foreign keys in tables. I have done the same project in vb6 with adodb with ms access and i have
finished it. But now based on my boss orders i have to connect vb6 with adodb with sql server 2008.
Now below is my code in mdi parent form in vb6 which i used to connect to database in access.:
Dim i As Integer
Dim AccessConnect As String
Dim dBOOL As Boolean
Dim dMstr As String
If (Left(App.Path, 1) = "\") Then
dMstr = Dir(App.Path & "tuscanDB.mdb")
Else
dMstr = Dir(App.Path & "\tuscanDB.mdb")
End If
dBOOL = IIf(dMstr = "", False, True)
If (dBOOL) Then
AccessConnect = "Driver={Microsoft Access Driver (*.mdb)};" & _
"Dbq=tuscanDB.mdb;" & _
"DefaultDir=" & App.Path & ";" & _
"Uid=Admin;Pwd=;"
If (adoDatabase.State <> 0) Then
adoDatabase.Close
End If
adoDatabase.ConnectionString = AccessConnect
adoDatabase.Open
Else
Dim mPath As String
CommonDialog1.CancelError = True
CommonDialog1.Flags = cdlOFNHideReadOnly + cdlOFNPathMustExist + cdlOFNFileMustExist
' Set filters
CommonDialog1.Filter = "All Files (*.*)|*.*|RTF (*.rtf)|*.rtf|Text Files (*.txt)|*.txt"
' Display the Save dialog box
CommonDialog1.FileName = ""
CommonDialog1.ShowOpen
dMstr = Dir(CommonDialog1.FileName)
mPath = Left(CommonDialog1.FileName, InStr(mPath, dMstr) - 2)
If (CommonDialog1.CancelError = False) Then
AccessConnect = "Driver={Microsoft Access Driver (*.mdb)};" & _
"Dbq=" & dMstr & ";" & _
"DefaultDir=" & mPath & ";" & _
"Uid=Admin;Pwd=;"
' Connection Object Methods
adoDatabase.ConnectionString = AccessConnect
adoDatabase.Open
End If
End If
where adoDatabase is name of my connection in vb6 with adodb with ms access.
Now how i connect vb6,adodb with sql server 2008?
Now my sql server 2008 details:
Server type: Database Engine
Server name: NPD-4\SQLEXPRESS
Authentication: Windows authentication
User name: NPD-4\TUSCANO
password:(it is left blank or not necessary)
Database name: Tuscan77
How to i connect my Database named Tuscan77 in vb6 and adodb.? Can anyone help me please.Any help or guidance would be greatly appreciated.Hi,
It would be more appropriate to post all your vb6 related queries in the below forums.
http://www.vbforums.com/forumdisplay.php?1-Visual-Basic-6-and-Earlier
http://forums.codeguru.com/forumdisplay.php?4-Visual-Basic-6-0-Programming
SRIRAM -
Connection pooling with SQL Server 2008 and Tomcat 6.0
Hello Everybody,
I'm creating a web application using struts 2.0 , tomcat 6.0 and sql server 2008.
Everything works fine but i'm unable to create connection pooling with sql server 2008.Please help me to solve this issue.
Code for this is as foolows:
in my META-INF/context.xml
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/spas" docBase="spas"
debug="5" reloadable="true" crossContext="true">
<Resource
name="jdbc/spas_new"
auth="Container"
type="javax.sql.DataSource"
maxActive="20"
maxIdle="10"
maxWait="-1"
user="spas_user"
password="spas123"
driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDriver"
url="jdbc:sqlserver://HGL-0053\dbo:1433;databaseName=spas_new;responseBuffering=adaptive;"/>
</Context>
in my web.xml
<resource-ref>
<description>SQL Server Datasource</description>
<res-ref-name>jdbc/spas_new</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
and in my ConnectionThread.java file i've used:
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Sorry! No Context Exception");
DataSource ds = (DataSource)ctx.lookup("java:/comp/env/jdbc/spas_new");
System.out.println("ds:"+ds);
conn=ds.getConnection();
Following is the exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Login failed for user ''.)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1225)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at login.V_SPAS_ConnectionThread.getConnection(V_SPAS_ConnectionThread.java:87)
at org.apache.jsp.login.v_005fspas_005flogin_005fpage_jsp._jspService(v_005fspas_005flogin_005fpage_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1023)
at org.apache.struts.tiles.TilesRequestProcessor.internalModuleRelativeForward(TilesRequestProcessor.java:345)
at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:572)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:221)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:694)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:665)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:54)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at login.V_SPAS_SecurityCheckFilter.doFilter(V_SPAS_SecurityCheckFilter.java:108)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user ''.Hi Karthikeyan,
This is not the issue at all. I can open the management studio by the same login id and password and also i can make the database jdbc connection from plain java file.
It does not give me any problem by them.
I'm unable to find the actual problem. May be i'm missing something in connection pooling.
Please help.
Regards
Mina -
DI Server with SQL Server 2008
Hello.
In the company where I work we develop an application that uses B1WS.
In the development environment had the following characteristics:
SAP Business One 2007 SP01, PL 09
SQL Server 2005 Developer Edition
Windows XP Professional SP 3
SAP Business One Web Services 1.0
At the time we applied to the deploying the SAP Business One version 8.8, but I had a serious problem. The test environment has the following characteristics:
SQL Server 2008 Enterprise Edition
SAP Busines One 8.8 * PL 10
Windows Server 2008
The problem is that when trying to connect to the DI Server generates the following messages:
The TAO NT Naming Service has stopped. (WithOut DBUser and DBPassword)
Unable to access SBO-Common database Login (With DBUser and DBPassword)
I tested the connection directly to the DI Server disponbile by example in the SDK and it generates the same error. For the SAP interface is connected correctly.
DI Server allows connect with SQL Server 2008?
Messagge:
<DatabaseServer>mv-05910a0046</DatabaseServer>
<DatabaseName>Prueba</DatabaseName>
<DatabaseType>dst_MSSQL2008</DatabaseType>
<DatabaseUsername>sa</DatabaseUsername>
<DatabasePassword>12345</DatabasePassword>
<CompanyUsername>manager</CompanyUsername>
<CompanyPassword>12345</CompanyPassword>
<Language>ln_English</Language>
<LicenseServer>mv-05910a0046:30000</LicenseServer>
Thanks
Edited by: Andres Naranjo on May 14, 2010 12:47 AM
Edited by: Andres Naranjo on May 14, 2010 3:56 PM
Edited by: Andres Naranjo on May 14, 2010 3:58 PMHad the same error
'The TAO NT Naming Service has stopped.'
Was using the external IP address for the LicenceServer - which is on the same server as SAP DIserver and B1WS.
I changed to using localhost:30000 and that solved the issue.
I suspect if I had used the internal IP it would have worked as well (ie the one you get from ipconfig) but as it works I'm not going to test that.
HTH -
ODBC function SQLDriverConnect() crashes with SQL Server 2008 R2
When calling the SQLDriverConnect() function from a 64-bit process and selecting a system DSN with a SQL Server Native Client 10.0 ODBC driver with SQL Server 2008 R2 SP3, then this call crashes here:
sqlncli10.dll!SNIMemRegion::Pop() + 0x77 bytes
sqlncli10.dll!SNIPacketAllocateEx2() + 0xa8 bytes
sqlncli10.dll!Np::ReadSync() + 0x7e bytes
sqlncli10.dll!Ssl::HandshakeReadToken() - 0x1b bytes
user32.dll!InternalDialogBox() + 0x132 bytes
user32.dll!DialogBoxIndirectParamAorW() + 0x56 bytes
user32.dll!DialogBoxParamW() + 0x85 bytes
sqlncli10.dll!SQLDriverConnectW() + 0x34f23 bytes
odbc32.dll!SQLInternalDriverConnectW() + 0x17c bytes
odbc32.dll!SQLDriverConnectW() + 0xa15b bytes
Am I calling SQLDriverConnect() correctly (see below)? Or is this a bug in the 64-bit version of the ODBC driver?
In the 32-bit version, everything works fine.
Here is a test program:
int _tmain(int argc, _TCHAR* argv[])
SQLHENV hEnv = NULL;
SQLHDBC hDbc = NULL;
SQLRETURN ret = SQLAllocHandle(SQL_HANDLE_ENV, SQL_NULL_HANDLE, &hEnv);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
ret = SQLSetEnvAttr(hEnv, SQL_ATTR_ODBC_VERSION, (SQLPOINTER) SQL_OV_ODBC3, 0);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO)
fprintf(stderr, "SQLSetEnvAttr failed\r\n");
return EXIT_FAILURE;
ret = SQLAllocHandle(SQL_HANDLE_DBC, hEnv, &hDbc);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
SQLTCHAR szConnection[2048];
SQLSMALLINT cbChars;
ret = SQLDriverConnect(hDbc, ::GetDesktopWindow(), (SQLTCHAR*) _T(""), SQL_NTS,
szConnection, _countof(szConnection)-1, &cbChars, SQL_DRIVER_PROMPT);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO && ret != SQL_NO_DATA)
fprintf(stderr, "SQLDriverConnect failed\r\n");
return EXIT_FAILURE;
else
fprintf(stdout, "Success\r\n");
return 0;
The stdafx.h contains the following includes:
#include "targetver.h"
#include <stdio.h>
#include <tchar.h>
#include <Windows.h>
#include <sql.h>
#include <sqlext.h>
#include <assert.h>
Steps to reproduce the crash: compile program with Visual Studio 2010 as 64-bit console application; run it and select a 64-bit SQL Server DSN.
If the crash does not occur, try using the "AllocationPreference" registry entry set to 0x100000 (see https://msdn.microsoft.com/en-us/library/windows/hardware/Dn613975%28v=vs.85%29.aspx for details); don't forget to reboot Windows. This registry
helps to find 64-bit portability issues.Hi T.holt,
Personally, I don’t believe SQL 2008 R2 with ADMT 3.2 is supported. From the guidelines of install the Active Directory Migration Tool (ADMT), ADMT v3.2 requires a preconfigured instance of SQL Server for its underlying data store. We
should use SQL Server Express and install ADMT v3.2 on a member server. ADMT installation enforces the following service pack requirements:
• SQL Server 2005 Express must be installed with Service Pack 3 (SP3) or later.
• SQL Server 2008 Express must be installed with Service Pack 1 (SP1) or later.
If you use full versions of SQL Server 2005 or SQL Server 2008. In this case, you need to install and run the ADMT console on a remote computer, and you can run multiple ADMT consoles on different remote computers. If
you use a full version of SQL Server, ADMT installation does not enforce any service pack requirements.
For more information about installing ADMT in the target domain, you can review the following article.http://technet.microsoft.com/en-us/library/cc974370(v=ws.10).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
DeadLocks on Query Notifications with SQL Server 2008 SP3
Hello,
according to this article https://support.microsoft.com/kb/975090 the issue with deadlocks on query notifications should be fixed with SQL Server 2008 SP3 (10.0.5500.0). But we still get deadlocks in the following manner:
<resource-list>
<keylock hobtid="72057598393909248" dbid="5" objectname="MyDB.sys.query_notification_1411013420" indexname="cidx" id="lock1731c1f00" mode="RangeX-X" associatedObjectId="72057598393909248">
<owner-list>
<owner id="process573dc8" mode="RangeX-X"/>
</owner-list>
<waiter-list>
<waiter id="process58ddc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
<keylock hobtid="72057598372872192" dbid="5" objectname="MyDB.sys.query_notification_253437289" indexname="cidx" id="lock800c8780" mode="RangeS-U" associatedObjectId="72057598372872192">
<owner-list>
<owner id="process58ddc8" mode="RangeS-U"/>
</owner-list>
<waiter-list>
<waiter id="process573dc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
</resource-list>
Is there any need to install another fix?
Thanks in Advance!Hello,
SQL Server 2008 SP4 and all cumulative updates of SP3 do not have fixes related to deadlocks.
Maybe the following workarounds and solutions can help in your scenario.
http://stackoverflow.com/questions/3707137/understanding-deadlocks-with-sql-server-query-notifications
Deadlock Prevention. In case you need to lock multiple conversation groups in a transaction, you need to take the same order to lock the different conversation groups in all transactions, otherwise you will have a deadlock issues.
Source:
http://blogs.msdn.com/b/kangmo/archive/2008/12/17/a-brief-guide-on-sql-server-service-broker.aspx
Try to may transactions more simple and shorter.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Add does not run with sql server 2008
Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
PradnyaHi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul -
IS ODI 10.1.3 compatible with SQL SERVER 2008?
Hi All,
Doews 10.1.3 work with sqlserver 2008? I have a sqljdbc4 driver listed in my driver folder, but I can't seem to get a connection when I am testing the connection.
ThanksDon't forget that ODI 10g has a bug in predefined connection string for SQL Server, and you'll need to check\correct it. We use ODI with SQL Server 2008, and everything is ok.
-
BI 7.3 delta extraction with SQL Server 2008
Hi experts,
I'm trying to extract data with delta update from a SQL Server with UD Connect, i test this ways:
Field DateTime in SQL Server: The problem is I only can delta within a day, no changes detected in the same day because SAP detects two fields here date and time, and can only can reference date field as a delta field.
Field TimesTamp in SQL Server: The problem seems the same, SAP recognize this as a date and time field.
Can any explain here the correct way for a delta implementation with SQL Server 2008? I would be very grateful.
Regards,Hi Fernando
That is what I need to do.
Create a Model from an existing SQL Server database with the Import data Dictionary option , be able to modify tables structures, extended properties in the model, and then sync those changes with the database.
So far I can't import the extended properties with DM 3.1.1. If you find a way , please let me know.
Thanks,
Jorge -
Will Report Builder 2012 Work with SQL Server 2008???
Simple question really
Will Report Builder 2012 work in conjunction with SQL Server 2008???
Is it worth while upgrading?
The main reason i ask is the ability to export in an xlsx format
ThanksHi Gmach,
The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
to SQL Server 2008 Server using Report Builder that on SSRS 2012.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support -
Upgrade DTSX packages from VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014
Hello everyone,
I’m very new to SSIS world. I’ve been assigned a task to upgrade the existing packages running in VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014. And then submit the migration report to my client.
On very quick search at Google, I've found the following link. It seems like I just need to open the existing SSIS project in VS 2013 and follow the wizard.
https://msdn.microsoft.com/en-us/library/cc280547.aspx
Can anybody please advise, are there any other things need to be taken care while doing this up gradation process?
Please share your experience.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.comHello Arthur,
Thank you for the response.
I just got an access of the packages. They are of VS 2008 and not 2010.
Do you know how to upgrade VS 2008 packaged to VS 2013?
When I tried to open the solution file in VS 2013, it says "incompatible".
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com -
Running OBIEE 11.1.1.7 with SQL Server 2008 R2 Service Pack2
I have check with Oracle on this and Service Pack 2 is not officially supported, but I would like to see if there is anyone out there running OBIEE 11.1.1.7 with SQL server 2008 R2 Service Pack 2? We are currently running 2008 R2 but without the service pack. Our Oracle team would like upgrade to SP2. If you have run sp2, are you encountering any issues, i.e. performance.
I have check with Oracle on this and Service Pack 2 is not officially supported, but I would like to see if there is anyone out there running OBIEE 11.1.1.7 with SQL server 2008 R2 Service Pack 2? We are currently running 2008 R2 but without the service pack. Our Oracle team would like upgrade to SP2. If you have run sp2, are you encountering any issues, i.e. performance.
-
ColdFusion8 works with SQL Server 2008 compatibility level 90?
We're currently is using ColdFusion8 and need to upgrade the database from SQL Server 2000 to 2008. Will ColdFusion8 work with SQL Server 2008 compatibility level 90?
Hi,
ColdFusion 8 is not supported with SQL Server 2008. A list of supported environment is available at http://www.adobe.com/products/coldfusion/pdfs/cf8_systemsupportmatrix.pdf
Regards,
Anit Kumar -
DM 3.1.1 with SQL Server 2008 . Extended Properties not imported .
Hi
I am using Data Modeler 3.1.1 with SQL Server 2008.
I have a database where I have Extended Properties (MS_Description) for the tables and columns.
I use the Import Data Dictionary option (database type SQL 2005) , and the extended properties are not being imported to the model.
Is there anything else that I should do to have the descriptions imported?
Regards,
JorgeHi Fernando
That is what I need to do.
Create a Model from an existing SQL Server database with the Import data Dictionary option , be able to modify tables structures, extended properties in the model, and then sync those changes with the database.
So far I can't import the extended properties with DM 3.1.1. If you find a way , please let me know.
Thanks,
Jorge
Maybe you are looking for
-
Can logic board die slowly, or is it black'n white?
My Macbook Pro 15" i7 of early 2011 seems to have a major problem related to the logic board. in a nutshell, in case you don't have time to read the details: The computer stopped starting up after quite a few restarts, AHT, PRAM reset, safe boots, ne
-
Need Help opening converted file in Pages
I have a Mac and use Pages as my word processor. Pages converts Word documents into its format so that they can be opened, read and edited. I have never been unable to open/use a document opened this way . . . till now. The downloaded document won'
-
How is system PATH set in Solaris 10?
When I issue "echo $PATH" after starting bash shell, default system paths are displayed. I noticed there is no *.bashrc* file anywhere on the system. Then from which script(s) and in what order are these paths get set?
-
When using CSS in APEX do you need to specify a DOCTYPE?
Hi Have just started looking at creating my own CSS for APEX apps. Have read that for non-apex web pages that without a DOCTYPE being specified, browsers such as Mozilla & IE-6 go into Quirks mode, a backward compatibility feature that functions as i
-
Hi...While creating a member site getting Managed Path not found, even it exists .. Ravindranath