Jump on breakpoint after a specific number of loop passes

Hello,
I want that the debugger in teststand 3.1 jumps on the breakpoint in a while loop after a specific number of passes.
how can I configure teststand, that this is possible?
regards samuel

After placing a breakpoint on a specific test-step, you can make a right-click on the breakpoint (right-click directly on nthe "Stop"-Symbol). In the Dialog you can set conditions (in your case this condition could be "Step.Result.PassFail==true") and a Pass Count, that will define how often the condition has to be true before the breakpoint really breaks the sequence.

Similar Messages

Form automatically close after receiving a specific number of submissions?

Hello,
I am using the form as a registration tool for an upcoming event. How do I get the form to automatically close after receiving a specified number of submissions? There are only 15 spots and 700+ folks may see the form. I need for only the first 15 to have access to the form. Thanks.

We don't currently have an automatic way to close a form after a set number of submission. You would have to watch for submission and close the form manually.
Andrew

How to export image sequence with a specific number

Hello
I'm looking how, like in after, I can export an image sequence with a starting specific number. I spend hours to rename images with Renamer, boring, stupid!
Thank you for helping
Alex

Use Bridge. You can do them all at once with Batch Rename.

Route calls to specific number based on Date and Time

Hi,
UCCX 8.5.1.11001-22
I am trying to create a script that will route calls to a specific number after-hours. The only catch is the number changes every week and rotates among 4 or 5 people. I have seen several scripts and xml documents up that give me a good start but I just cant seem to figure out the process with the xml document and call flow of this one. I do realize this is basically a programing question but if you could get me headed in the right direction it would help.
I am no stranger to UCCX scripting but a novice to xml integration.

I'm not sure what the SM toolkit is. Could you explain it or provide a link?
If you and your collegaue are admins, then I would say skip the overhead of an XML document for now and just manage the schedule in a subflow.
Example:
Subflow Variables
String oncall_number_current = ""String oncall_number_avholloway = "916125551212"String oncall_number_jsmith = "916125551313"String oncall_number_default = "916125551000"Date today = D[now]
Subflow Script
StartSwitch int (today.month) January (value == 1)
    /* In Jan, from the first to the fifteenth, Anthony is on call */    If (today.date >= 1 && today.date <= 15)
      True        Set oncall_number_current = oncall_number_avholloway
        Goto End of Script      False
    /* In Jan, from the sixthteenth to the thirty-first, John is on call */    If (today.date >= 16 && today.date <= 31)
      True        Set oncall_number_current = oncall_number_jsmith
        Goto End of Script      False
Febraury (value == 2)    /* In Feb, from the first to the sixth, Anthony is on call */
    If (today.date >= 1 && today.date <= 6)      True
        Set oncall_number_current = oncall_number_avholloway        Goto End of Script
      False    /* In Feb, on the seventh, from midnight to noon, Anthony is on call */
    If (today.date == 7 && today.hod >= 0 && today.hod <= 11)      True
        Set oncall_number_current = oncall_number_avholloway        Goto End of Script
      False    /* In Feb, on the seventh, from noon to midnight, John is on call */
    If (today.date == 6 && today.hod >= 12 && today.hod <= 23)      True
        Set oncall_number_current = oncall_number_jsmith        Goto End of Script
      False    /* In Feb, from the eighth to the twenty-nineth, John is on call */
    If (today.date >= 8 && today.date <= 29)      True
        Set oncall_number_current = oncall_number_jsmith        Goto End of Script
      False March (value == 3)
    ..etc, etc, building out the whole year... Default
    /* Set the default on call number */    Set oncall_number_current = oncall_number_default
    Goto End of ScriptLabel End of Script
End
Main Script Variables
String oncall_number = ""
Main Script Script
...oncall_number = Call Subflow (SCRIPT[oncall-sublfow.aef], oncall_number_current)Call Redirect (--Triggering Contact--, oncall_number)...
In the example of January 3rd, the subflow would execute 4 steps. That's not much at all. Of course you would only call the subflow if the hours called for it. This would eliminate unecessary calls to the subflow.
To update the oncall, just update the script, save, upload, refresh, and then refresh the apps which call it. No down time at all!
I hope that makes sense. If not, ask questions.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

WebEx Meeting Server 1.5 - Call drop after entering meeting number and #

Hi everyone,
Just installed a new CWMS server version 1.5... all features seem to work EXCEPT when I use the call in function, I type in the meeting number, hit # and the call is terminated.
I read through this document:
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/b_troubleshootingGuide/b_troubleshootingGuide_chapter_01000.pdf
From the document:
Call-In Issues
• Problem Users hear a reorder tone before or after the complete number is dialed.
• Problem The "Your call cannot be completed as dialed" message is played by the annunciator.
• Problem During call-back, a user's call terminates after pressing 1 to join the meeting.
• Problem During call-in, a user's call terminates after entering the meeting ID followed by #.
Possible Cause You need to reconfigure your CUCM servers.
Solution Reconfigure your CUCM settings as follows: Use the "<NONE>" partition and "<NONE>" CSS
(Calling Search Space) for all Cisco WebEx Meetings Server related entities in CUCM (for example, route
patterns, SIP route patterns, SIP trunks, etc.).
Solution Use one partition and one CSS specifically assigned for all Cisco WebEx Meetings Server related
entities. For more information refer to the system guide for your CUCM version.
I configured my route pattern to use <NONE> and all other option as <NONE> and still the call is terminated.
I created a css_webex CSS and put in pt_internal and assigned that and I still get terminated.
Am I missing something here?

Personally, I never really use the null partition but before we go there. You have a couple different route patterns. The first is an inbound call pattern(s) that are going to be standard route patterns (i.e. numeric) and you'll have some outbound PSTN patterns for the actual outdialing that CWMS does. You then have some SIP route patterns that can either be defined as IP or FQDN for each media server. After you connect and then want to join a meeting, those SIP route patterns are used to redirect you to the appropriate server where a meeting is hosted. For those patterns, are you using IP or FQDN and what partition are they in? If you are using FQDN then you may need to change to IP depending on your DNS configuration on CUCM.
Hailey

How or Can I look up a specific number in my billing history?

I am in the process of a law suit and I received a call from the other party after it had began and they were not suppose to call me. I need to find the number specifically on on eof my bills with the date but it could be a different number due to the fact it is a doctors office. It showed up the name I have it saved under on my phone but I am not sure if it was the same number or just my caller ID. I have so many pages of numbers and I am not sure exactly what bill it would be on. Does anyone know if you can look up a specific number some how?

No. There's no automated or "searchable" way. You would need to examine each bill.

How to change the ownership of a doc after a specific time in workflow ?

Hi
My objective is to create a workflow in ESO , that will change the ownership of a contract document from the current person to his supervisor ( supervisor's id will be in user id management page) after a specific time .
Please help me how to do it ?
I am using TWE editor for workflow design
Regards
Swastik

To prepare a computer for sale or donation, in addition to the steps mentioned in this support article, take these steps:
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you paid for an upgrade OS X 10.7 or later, you must reinstall the original OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.)
The new owner will have to repurchase the software, if need be, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer them either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Select a specific number of rows in query

How can a specific number of rows be selected in a query? For example, a query retrieves 30,000 records and I want to retrieve the output by groups of 5,000. I want the query to retrieve the first 5,000 records, then the next 5,000 records etc. I tried rownum but that does not work.
Thanks,
PANY

Not AGAIN. Please...........
Do you know how to Google? Search forum?
Why do you ask this boring FAQ AGAIN?
Sybrand Bakker
Senior Oracle DBA
Experts: Those who know how to search.

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

Can I set a book created by iAuthor so that it expires after a specific time? I am concerned that company created books will be lost if the iPad is lost.

Is it possible to have books created by iAuthor in an enterprise expire after a specific time? The books contain company intellectual property that might be lost if an iPad is lost. If the books could be "checked out" like a library book for a specific period of time after which it would become unreadable, it would minimize the concern.

To the best of my knowledge, iBooks and the iBooks Author have no expiration date possible. At least it's not anything I can find mentioned in any of the developer documentation. Many libraries use OverDrive's services, but I don't know if they offer their services to companies.
There are tools that can set an expiration data on a PDF, but whether any of those offer support in iOS I don't know; the couple I checked (PDF Security OwnerGuard and LockLizard) do not appear to.
Regards.

How can I capture a specific number of screen caps

Using final cut or any other application, how can I capture a specific number of screen caps? Each video will have a different length.

Bob,
Please clarify your question. Are you asking about screen captures? If so, what software are you using and what does this have to do with FCP?
-DH

Failure to connect a specific number to Philippines on Skype phone call. Texts go thru but not calls

One specific number in Philippines always drops on calling but texts go thru and are acknowledged ?

Hi gki1977,
Sorry to hear about this. If you fill out the contact us form located in the about me section of my profile, we will take a look at this for you.
Cheers,
Chris
BT Mod Team.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Select specific number of rows

i'm listing all data entries in a database.
for that i want to select the 1st ten entires, then the next ten and so on ordered
by date_column.
how can i do that? is it possible with rownum?
in mysql/php i did it with limit
$query = "select * from article where parent_id=0 order by date desc, time desc limit $select, 10";
please email me.
thanks for help
chris

but what about rownum if i want the
records from 10-20?
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Chen Zhao ([email protected]):
If you are using Oracle 8i, you can use ROWNUM to specify the specific number of records. You can see the ROWNUM by querying:
SELECT *
FROM (SELECT column_name FROM table_name ORDER BY column_name)
WHERE ROWNUM<10
CHEN<HR></BLOCKQUOTE>
null

Looping a movie clip a specific number of times in Flash

Does anyone know how to get a movie clip to loop a specific number of times in Flash? I know how to stop a movie clip from looping by using the this.stop (); command by placing the command in a separate Action Script layer, in a keyframe, inside of the movie clip's timeline. This allows the movie clip to play through once and then stop. But I need for the movie clip to loop more than once, maybe 2 or 3 times, and then go back to the main timeline. Does anyone know the code for this?
Also, is it possible to place a pause (I'm guessing, maybe by using a timer of some type?) between the loops, so that the movie will pause a couple of seconds before it loops again and then stop? Please note I do not need the movie clip to stop when there's an event like a rollover or anything. I just need it to play a couple of times, pause between plays and then stop and go back to the main timeline. Please let me know if anyone can help.
Thanks,
Sarah
P.S. Is there a good, easy to use, reference book anyone can recommend for creating specific things in Flash using Action Script? Do you guys have a favorite for beginners like me?

You can use a variable to keep count of how many times you loop, and until it exceeds a particulr value (2 or 3) you execute a setTimeout() call that waits for however long you want to delay and then tells the movieclip to gotoAndPlay(1).
So in the first frame you would establish the counting variable...
var count;
if(count == undefined){ // only set it to 0 once
count = 0;
and in the last frame you would do your incrementing and control....
stop();
count += 1;
if(count < 3){
setTimeout(waitABit, 2000); // call function in 2 secs
function waitABit(){
gotoAndPlay(1);

Getting a specific number of rows

Hi,
I would like to know how to get a specific number of rows. For example, I want to page data in my web application, so I'd like to be able to retrieve just 25 rows in my SELECT statement. I searched and I couldn't see anything under the obvious keywords of LIMIT and TOP (as used by other database vendors) so I'm wondering if possible, what do I need to do - a pointer to the relevant documentation would be helpful also.

You can achieve this with rownum
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/pseudocolumns009.htm#i1006297
Best regards
Maxim

Jump on breakpoint after a specific number of loop passes

Similar Messages

Maybe you are looking for