Jump within a BIG text file
Hi,
I have a text file with more than 3 million lines.
How can I easily jump to a specific line without reading line by line.
e.g. using the class RandomAccessFile to jump you need the number of bytes.
But each line has diffrent numbers of characters, thats why I can't jump directly via "seek" method.
thanks
Aykut
aykut_arslan wrote:
@paul.miner
can you write a little code, his suggestion of reading the file is not clear for meNo, that's for you to do. If you can at least write a good start, you can get help here, but I'm not going to write it for you.
I will give you some pointers:
1. Use RandomAccessFile.
2. The position you seek() to in the file should be directly proportional to the position of the scrollbar (e.g., if scroll bar is at 42% of it's maximum, seek() to 42% of the file size).
3. After seeking, read forward until you encounter a line break. Start displaying text from that position.
EDIT: Or just go with indexing, which is far simpler. As BDLH suggested, background processing is a good option. You could also make it so that the scroll bar position is proportional to the number of lines read so far, not the size of the file.
Edited by: paul.miner on Jan 16, 2008 2:29 PM
Similar Messages
-
Whats the best way to get a big text file in a CLOB variable?
Hi,
I have a very premitive type of question.
I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
Please suggest.
RegardsIn addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
PROCEDURE LOADFROMFILE
Argument Name Type In/Out Default?
DEST_LOB BLOB IN/OUT
SRC_LOB BINARY FILE LOB IN
AMOUNT NUMBER(38) IN
DEST_OFFSET NUMBER(38) IN DEFAULT
SRC_OFFSET NUMBER(38) IN DEFAULT
<BR>
PROCEDURE LOADFROMFILE
Argument Name Type In/Out Default?
DEST_LOB CLOB IN/OUT
SRC_LOB BINARY FILE LOB IN
AMOUNT NUMBER(38) IN
DEST_OFFSET NUMBER(38) IN DEFAULT
SRC_OFFSET NUMBER(38) IN DEFAULT -
Optimize way to manipulate Big text file ?
Hi all,
Here I start my story ..
Long long time ago, Mr.A has a big text file (let say 120 columns X 840k rows) , around 100MB. He wanted to swap the text column according to the input number, let say,
if input are 1,2,3,10,20,30,
output = a file with 6 columns, taken from column 1,2,3,10,20,30 of the big text file.
Then he found that the VI taking too long time to do the extracting. (the subVI consists of the normal array function, let say index array, insert array to create a new array, then save to a text file).
Hence, he chops the big text file to smaller text files (65k rows each text file), and he found that it's still taking a lot of time although the extracting time has improved a lot. Then he chops the files to 1024 rows each text file. And he end up with taking a few minutes too, to get the output file produced. (since smaller files = more files = more time consumed to open and close the file).
So, here I m asking help from expertss here.. Any idea to optimizes the way shown above ? Any ideal number of rows (120columns) to shorten the extracting time for the situation above ?
please advise. Thank you very much..Hi,
Thanks for you guys' replies ..
What is the format of the text file?
.txt
Fixed column widths, or delimited?
ya the number of columns is fixed for whole file. Delimiter = <space>
How are you reading the file ?
by using "read from spreadsheet file" ..
Here I explain more on my purpose.
Another purpose I chop the big file to 65k rows perfile is because the VI after this section (spreadsheet string to digital) cannot process huge data at once. So, the 65k of rows is the maximum row allowed for my case.
Then I chop it to smaller to observe if it will improve the performance....My VI is somesort like
spreadsheet string to array => index the column => append all the columns => array to spreadsheet string
I believe this is no good for big file ..
Here I attached a text file sample .. Thanks for the advices.
Attachments:
wf241basicreadwrite1to1patternstdwavesq0.txt 211 KB -
How to read long line from text file
Hi,
I just faced problem when reading a big text file.
BufferedReader br = new BufferedReader(new FileReader("D:\\afile.txt"));
String str;
int i;
while ((str = br.readLine())!=null)
i++;
//do some work here...
...This code throws exception:
Exception in thread "main" java.lang.OutOfMemoryError: Java heap spaceSo I thought file line is very long. When I opened it in FAR it only displays no more than 4096 characters as a line.
Help me to read a text file that's line is very long?try,
$ java -X
-Xmixed mixed mode execution (default)
-Xint interpreted mode execution only
-Xbootclasspath:<directories and zip/jar files separated by ;>
set search path for bootstrap classes and resources
-Xbootclasspath/a:<directories and zip/jar files separated by ;>
append to end of bootstrap class path
-Xbootclasspath/p:<directories and zip/jar files separated by ;>
prepend in front of bootstrap class path
-Xnoclassgc disable class garbage collection
-Xincgc enable incremental garbage collection
-Xloggc:<file> log GC status to a file with time stamps
-Xbatch disable background compilation
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
-Xprof output cpu profiling data
-Xrunhprof[:help]|[:<option>=<value>, ...]
perform JVMPI heap, cpu, or monitor profiling
-Xdebug enable remote debugging
-Xfuture enable strictest checks, anticipating future default
-Xrs reduce use of OS signals by Java/VM (see documentation)
-Xcheck:jni perform additional checks for JNI functions
The -X options are non-standard and subject to change without notice. -
Dynamically load content into a "template" swf from text file
I have a dream....
Well, I have a concept. I have not actively pursued Flash in
several years, though I've continued to have it in my arsenal. I've
not done much in the action scripting realm for a while though.
I am trying to create a template that will be used for about
100 different product pages.
It would have two tabs, basically, 2 different graphical
button sets. One will have up to 4 links to similar products, each
tab will be on the side of a square, and I need the ability to not
display a tab if there is no actual link.
As for the other tab, Its a menu that consists of a series of
lines. This can be an external menu, I just need a way to have
flash load the right menu. This menu, when you mouse over a line,
the name of the product appears, as well as a product image that
gets loaded with the menu. The product images would be external,
allowing me to simply replace an image if a new higher end version
of the product comes out.
So, I am totally not an actionscripter. Looks like I need to
load variables from an external file. Can I set a property in the
flash code on the html that tells the movie what dataset to grab
from?
Here's basically what I am looking for
property: value
(load variables for:)
item: 44
(menu1)
faster: 54b.html
slower: 34d.html
left: 43d.html
right: 45c.html
(menu2)
menu:graph5.swf
(menu loads images from external source)
link51: 51d.html
link52: 52c.html
link53: 53c.html
link54: 54d.html
link55: 55b.html
link56: 56d.html
A possible third menu would be text driven, and would use
html to link to various items.
This is a static site, so urls will be fixed.
Is it best to build a php page that serves up data for a
single item, or do one big text file with all 100 or so items? Is
that even possible?
My Flash since MX is very rusty. I am using Flash Pro8. I
would love to create a single file so modifications are to the text
files, unless a new item is released, then it's updating a single
flash menu and updating the text file.
Been spending way too much time in InDesign lately! I used to
be pretty good at Flash!well sorry there fanmap - but I don't think you're going to
be able to get this to work. here's why: the link points to a php
file - which gathers dynamic info from a DB - the return from the
php is generating a string that is based on the DOM and
'constructs' a javascript method that in turn writes to the html
document. although we can embed html into a textField in Flash
there are a limited number of supported html tags - and JS methods
will not operate internally. in addition, (i'm not certain someone
correct this if i'm off) there's no way to 'change' the output of
the php call, therefore you will not be able to read the return
because it is designed to use the DOM and write solely to the
current document. Even if you were to access the JS method from the
swf file (which one can) it will still only write the content of
the php return to the html document - and the output is not
compatible with the textField class. -
Appending text files to each otner
Here's the case:
I have several text files in a folder, that I want to append to each other into one big text file.
How can I do this with java? Any suggestions?
- bufferzoneOfcourse. First create a new Outfile. Read the first file and write it into the new Outfile. Now read the second file...... if i am not clear just get back....
-
Renaming Images from Text File
Hello,
I am trying to rename images in a folder to match the names within in a text file. The names in the text file are all unique, so using a rename batch like example-1.jpg, example-2.jpg, etc. won't work. I have matched the structure between both the name and image file, so I need automator to traverse down the text file and add each unique name to the corresponding image.
If anyone has some help for this it will greatly be appreciated! ThanksI wrote you a shell script that will do the job.
First, put all your images into a folder (if you haven't already done so). Make a copy of the folder for safety's sake (I tested the script and it should work fine, but it's always good to have a backup).
Now, make sure each new name in the text file is on its own line. Rename the file to "list.txt" and put it in the same folder as the images (better make a copy of the list, too).
Now, download this file: http://danielrichman.com/tmp/file_rename.sh
Put it in the same folder as your images.
Now, open Applications -> Utilities -> Terminal and type the following (without quotes):
"cd "
Then open up the Finder window that contains the images. In the title bar of the window, there's a little folder icon. Drag the icon into the Terminal window. (You should see the path copied.)
Then, in Terminal, press enter.
Then copy this (and press enter at the end):
"chmod a+x ./file_rename.sh"
Then, do this:
"./file_rename.sh"
That should be it! Please let me know how it goes.
Good luck!
ddr -
Hey all.
I am playing around with the idea of finding a line of text within a text file, by using scanner and some next methods.
The way I am trying to get it to work is that one enters a string and the program then finds all the lines of text containing that
user-entered string and then prints them.
The text file in question contains names of University papers and their room numbers, quantity of students etc.
Example:
IBUS212 EALT006 1am 72 AL LI
BMSC241 MCLT102 2 pm 8 AL COOREY
My problem annoyingly enough seems to be that I can't think how one could compare the string entered to the lines of text being
scanned in the text file.
My latest go involved what you see in the code, scanning the examdata.txt file for a user-entered course number, using course.next();
by going with the example above it would be IBUS212. The task was to then to find all of the lines containing that number and print them out using
println (what I have tried with id and line) as well as the rest of that line eg: EALT006 1am 72 AL LI .
public void printCourse()
try
String details, input, id, line;
int count;
Scanner user = new Scanner(System.in);
System.out.println();
System.out.println();
System.out.println("Please enter your course ID: ");
input = user.nextLine();
Scanner course = new Scanner(new File("examdata.txt"));
course.next();
course.nextLine();
id = course.next();
line = course.nextLine();
if(input.equals(id))
System.out.println("Your course times are: " + id + "and" + line);
else
System.out.println("Your course does not exist.");
catch(IOException e)
System.out.print("File failure");
}Any advice/help/troubleshooting would be greatly appreciated.
Edited by: AUAN on Aug 13, 2009 9:43 AM
Edited by: AUAN on Aug 13, 2009 9:44 AM
Edited by: AUAN on Aug 13, 2009 9:49 AMYou'll want [to loop while|http://java.sun.com/docs/books/tutorial/java/nutsandbolts/while.html] the course Scanner has a next line and then print the line if it contains the entered text.
For useful methods you can check the Javadoc of String and Scanner (use your browser search on keywords like 'next' or 'contains' to find them). -
Create a text file output from within a procedure
I can output to a file from within SQL+ using the spool command but how do I do this from within a procedure?
I have got a table called ABC and want to output columns A and B to a new text file based on variables pased through when the procedure is run, the name of the text file should be generated from a sequence?
Any info appreciated.
Cheers
CliffHi,
U can use UTL_File Package, But the only constraint is it will write the file only on the server m/c and not on the client m/c.
Regards
Gaurav -
How do i read a context of text file within Dynamic Page of portal ?
Dear sir,
I have a text file in client computer. I hope i can transfer the context words of this text file to oracle database. How do i coding this script in dynamic page of portal?
Can Oaracle 9ias script read and draw the context of a document. Thank you ver much!
Ghia LiuGreat questions, Rik, and I understand how this might seem bizarre. Here's the story... these 2500 files were authored with a built-in authoring tool of our current knowledge management system. This KMS is about to be replaced with a new one and because the new KMS needs content within the <head> tag instead of where it was in the <body> tag and redefined as meta data, I repuposed the content in those files using Dreamweaver and regular expressions. However, the one remaining <h3> and <p> content is in the middle of the newly tagged meta data and it must be moved from the <head> area and into the <body> area.
Because these were authored in the built-in KMS authoring tool, there is no style sheet and no, we do not manage our content with a CMS.
You are correct, if the <h3> and <p> were at the end of the data, I could simply move the </head> and <body> tags, but unfortunately that is not the case. They are consistenly in the same place in all 2500 files, but in the middle of the data. Following is an example:
<html>
<head>
<title>Title here</title>
<meta name="XYZ" content="Something here...">
<h3> Blah blah</h3> <p>More blah blah</p>
<meta name="123" content="More somthing here">
<meta name="456" content="More somthing here">
</head>
<body>
</body>
</html>
Again, I can find the block using a regular expression <h3>(.*?)</p>, but dont know what to do after that.
I've been told that perl or grep might do the needed task, but that requires outside resources and I have no budget for that.
Any suggestions are greatly appreciated.
thanks,
Rick -
I want to open a text file and display it within Lookout 5.0
How do you read and display a text file within Lookout 5.0?
Hi Kenneth,
This should have been trivial, but isn't. Well, it isn't that difficult either. Here's the trick:
Create a DataSocket Object. For the URL, type: file:c:\ni\lookout5\test.txt[text]
Leave the Update mode as Automatic for now. Connect a Switch to the Connect member of the DataSocket object.
On the panel, drag-and-drop the DataSocket.data.txt. Toggle the Switch and voila you have the text in Lookout! I have attached an example (detach the txt file to your C drive; or change the path in the DataSocket object).
For the curious, DataSocket is a NI networking technology which supports ftp, http, file, and other protocols. See this
>FAQ f
or general info' on DataSockets.
Hope this helps,
Khalid
Attachments:
test.txt 1 KB
readtext.lks 2 KB -
Can anybody tell me if it's possible to read and write to a text file stored within the .jar file package? I can maintain a constant file length if that enables me to read and write.
cheers,
Stevereading a text from, from a jar file..... if the jar is in your classpath you can call
getClass().getResourceAsStream ( "/myServerConfig.properties" );Note the "/", which stops the file from being interpreted as a class name, see Class.getResourceAsStream()
writing... nothing as easy as the reading solution above.
You'd probably have to actually "update" the JAR file contents with a new version of the text file.
regards,
Owen -
Static method to read text file within JAR.
I've a small problem. I've got my JAR file stuff working great, so I thought I'd give a go to running it via WebStart. Through a little research, I've found that if you're distributing your application via WebStart, you need to pack up everything in a JAR file. This is no problem for the JDBC drivers, because its already in a JAR, so I should be able to distribute that fine.
I've managed to digitally sign my application JAR and have a preliminary (i.e. untested) JNLP file set up.
My problem is, my application gets its available data sources from an external text file. I've already written my own file I/O class which I use in my "commonfiles" package to read in a text file and return it as an array with each element holding a line from the text file. This class is basically just a bunch of static methods.
So instead of rewriting this, I thought I'd just add a boolean flag to this method to state whether to load this file from the external file system or the JAR file. I've found out that to load a text file from within the JAR you have to use something like: -
String str = (this.getClass().getResource("/myData.txt")).getFile();
java.io.File fil = new java.io.File(str);
java.io.FileReader fr = new java.io.FileReader (fil);
java.io.BufferedReader bin = new java.io.BufferedReader (fr) ;The sticking point is that my method (ReturnFileAsArray()) is declared as static, because my own FileIO class is just a bunch of static methods to do file I/O stuff. Therefore, I can't use the above method because of the instance variable "this" (I assume).
Is there any way I can load an included text file as above without having to declare my method as an instance method? I guess I could write a seperate class to do this for my commonfiles package, but I'd rather not if possible.
Any ideas?Don't put a "flag" and code different ways to read files depending on whether it's in a JAR or not. Just use
the getResource/getResourceAsStream API regardless. Hmmm.....so that will load it from either place depending on the situation? I keep getting a NullPointerException doing that, on this line: -
String strFileName = (FileIO.class.getResource(fileName)).getFile();...although I've only tried it using the external local filesystem file (in the same directory) as I've not really finished setting up my WebStart stuff yet.
Here is the method in question...
public static String[] ReadFileAsArray(String dirName, String fileName, boolean bFromJAR) {
String[] resultStringArray = null;
StringBuffer strBuffer = null;
StringTokenizer strTokenizer = null;
FileReader fReader = null;
BufferedReader bReader = null;
int iElementCount = 0;
if ((dirName.length() < 1) || (fileName.length() < 1)) {
// Null parameters found. Failure.
return null;
} else {
// Parameters correct, continue.
try {
// Read the file contents and convert to String array.
//if (bFromJAR) {
// Open file from within JAR file.
String strFileName = (FileIO.class.getResource(fileName)).getFile();
File jarFile = new File(strFileName);
fReader = new FileReader(jarFile);
//} else {
// Open from local filesystem.
// fReader = new FileReader(dirName + File.separator + fileName);
bReader = new BufferedReader(fReader);
strBuffer = new StringBuffer();
while (bReader.ready()) {
strBuffer.append(bReader.readLine() + "%%");
strTokenizer = new StringTokenizer(strBuffer.toString(), "%%");
resultStringArray = new String[strTokenizer.countTokens()];
while ((strTokenizer.hasMoreTokens()) && (iElementCount < resultStringArray.length)) {
resultStringArray[iElementCount++] = strTokenizer.nextToken();
bReader.close();
return resultStringArray;
} catch (IOException e) {
return null;
}I'm calling it using: -
// Load the external file into a String array, one row for each element.
String[] fileArray = FileIO.ReadFileAsArray(System.getProperty("user.dir"), "datasources.dat", true);Cheers on any info on this. -
I have downloaded a trial version of Aperture because I would like to switch from using Picasa and gimp to using Aperture. I already know that I want to use Aperture, and that I cannot learn how in 30 days. I want to use the 30 days to see if I can solve a different problem: bulk export of all information except edits and versions from Aperture.
I want to avoid locking information (other than than the edits and version information that Aperture maintains) about my photos into any one piece of software.
Picasa stores a copy of almost all its information in text filies (mostly XML or .ini format) that are scattered through its picture library. These files can be scanned and found by use of Mac OS X tools that are availabe in Terminal (at the bash command line). All of the information about albums, faces, etc can be exported by a single command (after wtiting the progams that the command will initiate. I have not yest found any similar files in Aperture.
Aperture supports the export of EXIF and IPTC metadata, but only for selected photos, and does not appear to support the export of other information at all.
What I would like to do with a single operation, from either Aperture or Terminal, is to export the entire arrangement of phost ins albums and projects, lists of albums, projects and phots with all metadata (including added keywords) attached to each, and for referenced photos, the external file name. I do not care if would be in one file or many different text files, because Mac OS X provides all the tools I would need to extract the information I would want from any number of text files.
This would allow me to reconstruct all of the information about my photos (except for edits and versions) outside Aperture, and to use that info in a database outside Aperture. I would then be able to use Aperture while still being able to do everything that I could do with Picasa.
The most helpful form of an answer to this question might be a list of places to look in the Apple support and Apple developer documentation. It is difficult to teach me anything complicated, but I am fairly good at figuring out things from documentation.The following script recursively lists the content of an Aperture library. The output is simple, for demonstration puposes, but could be modified to XML. If the XML were that of a PLIST, the Apple Property List viewer oculd be used to diaplsy the output.
A simlar script produces all of the keywords and tags for all of the images in Aperture.
The scripts run much faster in the shell than in the AppleScript Editor bcause the shwll produces no debugging or monitoring information.
#!/usr/bin/env osascript
(* Demo: list the containment hierarchy in Aperture, starting from libraries.
Runs from AppleScript Editor, or as a shell command
References:
Aperture 3 AppleScript Reference Manual,
particularly the Containment Diagram in Appendix A
from the link on "Aperture Resources" web page at http://images.apple.com/aperture/resources/
Aperture AppleScript Dictionary, accessed from AppleScript Editor
Ian E. Gorman
global outputFile
set outputFilePath to "/Users/ian/prj/sw/AppleScript/ApertureContainment.txt"
global lineEnd
set lineEnd to "
global tabChar
set tabChar to " "
on writeText(str)
write str to outputFile
end writeText
# Open the file, guarantee closure after any error, and list the contents of Aperture libraries
try
set outputFile to open for access POSIX file outputFilePath with write permission
set eof outputFile to 0 # truncate the file, if it already exists
my listAll()
close access outputFile
on error errorMsg number errNum from offendingObj partial result resutList to expectedType
try
display alert "Operation failed, attempting to close output file" & lineEnd & "Error number " & errNum & ": " & errorMsg
close access outputFile
display alert "Operation failed, but output file has been closed"
on error
display alert "Operation failed, also failed to close output file"
end try
end try
# top-level in Aperture
on listAll()
tell application "Aperture"
repeat with eachLibrary in libraries
my listLibrary(0, eachLibrary)
end repeat
end tell
end listAll
on listLibrary(level, thisLibrary)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "library" & tabChar & (name of thisLibrary) & lineEnd)
repeat with eachAlbum in albums of thisLibrary
my listAlbum(newLevel, eachAlbum)
end repeat
repeat with eachFolder in folders of thisLibrary
my listFolder(newLevel, eachFolder)
end repeat
repeat with eachProject in projects of thisLibrary
my listProject(newLevel, eachProject)
end repeat
repeat with eachImageVersion in image versions of thisLibrary
my listImageVersion(newLevel, eachImageVersion)
end repeat
end tell
end listLibrary
on listAlbum(level, thisAlbum)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "album" & tabChar & (name of thisAlbum) & lineEnd)
repeat with eachImageVersion in image versions of thisAlbum
my listImageVersion(newLevel, eachImageVersion)
end repeat
end tell
end listAlbum
on listFolder(level, thisFolder)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "folder" & tabChar & (name of thisFolder) & lineEnd)
repeat with eachAlbum in albums of thisFolder
my listAlbum(newLevel, eachAlbum)
end repeat
repeat with eachFolder in folders of thisFolder
my listFolder(newLevel, eachFolder)
end repeat
repeat with eachProject in projects of thisFolder
my listProject(newLevel, eachProject)
end repeat
repeat with eachImageVersion in image versions of thisFolder
my listImageVersion(newLevel, eachImageVersion)
end repeat
end tell
end listFolder
on listProject(level, thisProject)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "project" & tabChar & (name of thisProject) & lineEnd)
repeat with eachAlbum in albums of thisProject
my listAlbum(newLevel, eachAlbum)
end repeat
repeat with eachSubfolder in subfolders of thisProject
my listSubfolder(newLevel, eachSubfolder)
end repeat
repeat with eachImageVersion in image versions of thisProject
my listImageVersion(newLevel, eachImageVersion)
end repeat
end tell
end listProject
on listSubfolder(level, thisSubfolder)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "subfolder" & tabChar & (name of thisSubfolder) & lineEnd)
repeat with eachAlbum in albums of thisSubfolder
my listAlbum(newLevel, eachAlbum)
end repeat
repeat with eachSubfolder in subfolders of thisSubfolder
my listSubfolder(newLevel, eachSubfolder)
end repeat
repeat with eachImageVersion in image versions of thisSubfolder
my listImageVersion(newLevel, eachImageVersion)
end repeat
end tell
end listSubfolder
on listImageVersion(level, thisImageVersion)
local newLevel
set newLevel to 1 + (level as integer)
tell application "Aperture"
my writeText((newLevel as rich text) & tabChar & "image version" & tabChar & (name of thisImageVersion) & lineEnd)
end tell
end listImageVersion -
Reading a text-file from within a Jar-file...
I've made a program, that reads from a text-file. And it works great. But when I try to put the program into a jarfile, I get a fileNotFoundException... I have the textfile both inside and outside the jarfile... with the same result.
Does anyone know what I might be doing wrong?
Thanx in advance!
MartinDepends on the path you enter for the text file. If you simply put "filename.txt" then you should try to have the file in the same directory as the class which accesses the file.
Cheers,
H�vard
Maybe you are looking for
-
How to Debug ATG Apllication in eclipse juno
Hi , Am new to ATG, I have existing project which i imported using import option. can any one please let me know 1.Settings for debug in eclipse. 2.how to debug ATG application in eclipse with weblogic. Am using weblogic 10.3.6 server and IDE is ecli
-
Digital Signature expiry warning in Portal to backend access
Hi All, we are facing below issue in portel to access workflow in SRM system The application's digital signature has an error. Do you wan to run the application ?" and/or Plz advice how to correct the issue. Tks, Thiru
-
Old method of cloning a domain broken in 10.3.0?
Up through 9.x, I "cloned" domains by copying the admin server's domain directory tree to the new machine, changing the directory paths, manually editing scripts and config.xml, etc. to reflect the new domain name, IP/ports, machine names, etc. Norma
-
Why are no Pentax lenses in the Adobe Camera Raw lens profiles when processing JPG files?
I normally shoot and process raw files and use the latest version of Adobe Camera Raw for processing. Some of these files are converted to jpg for use on the net or e-mailing etc. Sometimes I want to make minor changes to the now converted jpg file a
-
Checking dates for the request
Hello, Can anybody will help me to resolve this issue. I have the scenario for the current month we are loading the data into ODS by delta but i would like to check the condition if the system has the request number for the current selection date hen