Junit command line

Hello
I'm trying to start a JUnit test from command line.
I've succesfully started it with the java org.junit.runner.JUnitCore MyClass
My problem is that I have my main class in a jar file. The manifest file is pointing to the correct main class but when i use
the java org.junit.runner.JUnitCore -jar myjarfile.jar i get these messages:
Couldn't find class -jar
Couldn;t find class myjarfile.jar
Is there any other way ?
Thanks

jipada wrote:
Hello
I'm trying to start a JUnit test from command line.
I've succesfully started it with the java org.junit.runner.JUnitCore MyClass
My problem is that I have my main class in a jar file. The manifest file is pointing to the correct main class but when i use
the java org.junit.runner.JUnitCore -jar myjarfile.jar i get these messages:
Couldn't find class -jar
Couldn;t find class myjarfile.jar
Is there any other way ?
ThanksYou apparantly do not realize that switches (such as -jar) must be placed before the argument which specifies which class to run.
But in this case, a -jar command line option is in direct conflict with a class name to run, because that would mean search the jar file for its manifest to figure out what class to run. You want a -classpath switch, not a -jar switch.

Similar Messages

Error while running ADF-BC Test Suite from command line

Hi,
I have created a separate test project containing the Test Suite for the Model componenet of my ADF-BC application.
I need to run this test project separately from jmeter.
The tests run fine from Jdev, But when I package the test project into a jar and try to run from command line, I get the following error:
java.lang.NoClassDefFoundError: oracle/jbo/ApplicationModule
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<init>(ServiceAMFixture.java:36)
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<clinit>(ServiceAMFixture.java:15)
        at com.oracle.cs.cap.module.view.EntitlementReportDurationViewVO.EntitlementReportDurationViewVOTest.<init>(EntitlementReportDurationViewVOTest.java:11)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
        at java.lang.reflect.Constructor.newInstance(Unknown Source)
        at org.junit.internal.runners.JUnit4ClassRunner.createTest(JUnit4ClassRunner.java:72)
        at org.junit.internal.runners.JUnit4ClassRunner.invokeTestMethod(JUnit4ClassRunner.java:79)
        at org.junit.internal.runners.JUnit4ClassRunner.runMethods(JUnit4ClassRunner.java:51)
        at org.junit.internal.runners.JUnit4ClassRunner$1.run(JUnit4ClassRunner.java:44)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.internal.runners.JUnit4ClassRunner.run(JUnit4ClassRunner.java:42)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.runners.Suite.access$000(Suite.java:26)
        at org.junit.runners.Suite$1.run(Suite.java:93)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.runners.Suite.run(Suite.java:91)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.internal.runners.CompositeRunner.run(CompositeRunner.java:28)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:130)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:109)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:100)
        at org.junit.runner.JUnitCore.runMain(JUnitCore.java:81)
        at org.junit.runner.JUnitCore.main(JUnitCore.java:44)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ApplicationModule
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        ... 27 more
The Test project jar is created as ADF Library JAR File with Model.jpr as the dependent project. This takes care of project class dependencies
All the adf library dependencies are added to the manifest file of the Test Project jar referring to a location lib/ in the jar file directory.
I tried creating the ApplicationModule using both Configuration class (Configuration.createRootApplicationModule) as well as using the JDBC Connection String but both fail when I run the test cases independently from jmeter.
Anybody came across such an error? Please help.
Thanks,
Sapna

Hi Timo,
Im using JDev version 11.1.1.6.0.
I checked the class path on the jdev console. All the library references are mentioned in the manifest.mf classpath of the test project like below:
Manifest-Version: 1.0
Class-Path: lib/identitystore.jar
lib/adfm.jar
lib/groovy-all-1.6.3.jar
lib/adftransactionsdt.jar
lib/adf-dt-at-rt.jar
lib/adfdt_common.jar
lib/adflibrary.jar
lib/xmlparserv2.jar
lib/db-ca.jar
lib/jdev-cm.jar
lib/ojmisc.jar
lib/commons-el.jar
lib/jsp-el-api.jar
etc...
So I expect the library references should be resolved looking at the manifest file.
Another set of entries that I see in the jdev classpath are related to the Model project which is under test.
-classpath
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\.adf;
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\Model\classes;
How do I put these entries into my class path? Will it be sufficient if I add the Model.jar into my test project classpath?
Thanks,
Sapna

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Permission problems with command line CVS and Java CVS App

Greetings,
I'm part of a moderately sized website development team which recently upgraded to MacBook Pros (dual core) running OS 10.4.9. One of the primary tools we use in our day to day work is the open source concurrent versioning system (CVS). We've noticed a distressing issue running CVS on our macbook pros: there seems to be a problem with the way these new machines handle permissions on the directories/files that CVS uses to manage files.
The error occurs when the CVS application, in this case both command line CVS and GUI CVS application named SmartCVS, tries to rename a temporary file named Entries~ to its new name Entries (no ~). It looks like this:
java.io.IOException: Could not rename file
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries~ to
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries
at smartcvs.JP.a(SourceFile:125)
at smartcvs.JP.a(SourceFile:113)
We've noticed that if we open up a get info window on the directory we're downloading, and choose "Apply to enclosed items" right when we start the download process, the issue will be resolved, presumably because the permissions are being set on the subdirectories as the download is taking place.
We've checked the permissions on the overall ~/Sites/ directory numerous times, and they always seem to be set correctly as drwxr-xr-x. It's within this folder that CVS creates a directory with the CVS module name and downloads all the contained files, so we don't see why it would be having issues completing this successfully. We also checked to ensure the GUI CVS application is running under the current user on the machine: it does.
Has anyone run into issues like this in the past? Is there more information I could provide to further clarify the problem we're having?
Thanks for any input you have!

Thanks for asking Jeff, yes one place we are seeing this error is Java application SmartCVS, though the results posted here are from a normal command line CVS checkout.
===
Checkout command:
cvs co [MODULE]
===
Error:
cvs [checkout aborted]: cannot rename file CVS/Entries.Backup to CVS/Entries: No such file or directory
===
ID:
uid=502([USER]) gid=502([USER]) groups=502([USER]), 81(appserveradm), 79(appserverusr), 80(admin)
===
LS -ALN
Computer:~/Sites [USER]$ ls -aln
drwxr-xr-x 28 502 502 952 Jun 4 13:11 Sites
Computer:~/Sites/[MODULE] [USER]$ ls -aln
drwxr-xr-x 38 502 502 1292 Jun 4 13:33 www_root
Computer:~/Sites/[MODULE]/www_root [USER]$ ls -aln
drwxr-xr-x 32 502 502 1088 Jun 4 13:33 [SUBDIR1]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1] [USER]$ ls -aln
drwxr-xr-x 5 502 502 170 Jun 4 13:33 [SUBDIR2]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2] [USER]$ ls -aln
drwxr-xr-x 4 502 502 136 Jun 4 13:33 [SUBDIR3]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3] [USER]$ ls -aln
drwxr-xr-x 6 502 502 204 Jun 4 13:33 CVS
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3]/CVS [USER]$ ls -aln
total 32
drwxr-xr-x 6 502 502 204 Jun 4 13:33 .
drwxr-xr-x 4 502 502 136 Jun 4 13:33 ..
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries.Log
-rw-r--r-- 1 502 502 48 Jun 4 13:33 Repository
-rw-r--r-- 1 502 502 63 Jun 4 13:33 Root
MacBook Pro / MacPro Mac OS X (10.4.9)

Problem in passing parameters in command line in desktop

Hi,
I am trying to generate reports from command line (Oracle Discoverer 4i Version 4.1.42.04.00) but I am facing problems when I try to pass date or numeric parameters. It seems to work with strings
The following command is successful when i pass string as parameters
C:\orant\DISCVR4\dis4usr.exe /connect reports/reports@orcl /opendb load_report_1 /batch /sheet 2 /parameter "P Date" "31-JUL-2006 Month End" /export xls c:\Temp\load_report_!
But in the following commands the command line execution stops when a worksheet with parameters is encountered. Once then parameter is entered the command line is executed successfully. In these problem cases it seems like the /parameter option is not being recognized. I have tried to pass parameters with double quotes, single quotes, without any quotes.
C:\orant\DISCVR4\dis4usr.exe /connect reports/reports@orcl /opendb "load report 2" /sheet 3 /parameter "Select P Day" "20-JUN-2006" /batch /export xls c:\Temp\load_Report_2
C:\orant\DISCVR4\dis4usr.exe /connect reports/reports@orcl /opendb "load report 3" /batch /sheet 1 /parameter "Enter Date Using Format YYYYMMDD" 20060703 /export xls c:\Temp\load_report_3
The only difference I can see is that I have not used double quotes in the command line that is successful in generating reports with parameters.
Any inputs will be appreciated - we are stuck in our project due to this issue. Many thanks.
Warm regards
Sucharita

Hi
I work in the same team as the original poster.
We tried by changing NLS_DATE_FORMAT for the oracle_home.
Just to clarify our issue I am describing it one more time below -
Using Disc desktop (4.1.42) we are trying to run the reports using command line interface. Any report that takes character input for the parameters ,is running fine in the batch mode without prompting.
Any report that takes Date/Numeric input for the parameters, though in batch mode, is prompting for user to give the parameters.We tried with quotes as well.
For Example -
1. Character input : when we run this command supplying the input parameter values (which are characters), report runs fine without prompting for values.
C:\orant\DISCVR4\dis4usr.exe /connect rep/rep@orals /opendb Schd_Report /batch /sheet 2 /parameter "Process Date" "31-JUL-2006 Month End" /export xls c:\audit_report_5
2. Date Input -
C:\orant\DISCVR4\dis4usr.exe /connect rep/rep@orals /opendb "DLS.Arrears Reports" /batch /sheet 1 /parameter "Please Enter Date Using Format YYYYMMDD" 20060703 /export xls c:\CA_arr
When we submit this we get a window prompting for the input values. So his is the issue.
Thanks
Raman

How to Hide username and password in command line using maxl

Hi,
How to encript my user name and password in command line prompt when I am login to Essbase server using batch file:
*1_Here is my batch file:*
Name of the bat file AV_Assig_Var1.bat
rem This batch file defines the following variables:
set $1 = 'admin';
set $2 = 'password';
essmsh AV_Asig1.mxl admin password
===========================
*2_Here is my maxl file:*
Name of the bat file AV_Asig1.mxl
/* Create a process log */
spool on to 'D:\lova\spool_log.txt';
/* login (using variables from a batch file */
login $1 $2 on 10.42.100.229;
/* create application and database */
create application AV_Asig1;
create database AV_Asig1.AV_DB;
/* End process log */
spool off;
exit;
*3_Command line prompt*
D:\Ess>AV_Assig_Var1.bat
D:\Ess>rem This batch file defines the following variables:
D:\Ess>rem 1: username
D:\Ess>rem 2: password
D:\Ess>essmsh AV_Asig1.mxl admin password
Essbase MaxL Shell - Release 9.3.1 (ESB9.3.1.0.0A181)
Copyright (c) 2000, 2007, Oracle and/or its affiliates.
All rights reserved.
MAXL> login admin password on *10.46.100.222*; /* I want to hide this information */
OK/INFO - 1051034 - Logging in user [admin].
OK/INFO - 1051035 - Last login on Monday, June 14, 2010 12:44:03 PM.
OK/INFO - 1241001 - Logged in to Essbase.
MAXL> create application AV_Asig1;
OK/INFO - 1051061 - Application AV_Asig1 loaded - connection established.
OK/INFO - 1054027 - Application [AV_Asig1] started with process id [6792].
OK/INFO - 1056010 - Application AV_Asig1 created.
MAXL> create database AV_Asig1.AV_DB;
OK/INFO - 1054014 - Database AV_DB loaded.
OK/INFO - 1056020 - Database AV_Asig1.AV_DB created.
MaxL Shell completed
D:\Ess>
I am looking forward to inputs from anybody.
Thanks & Regards,
Deepthi.

Beyond that thread, I gave a presentation at Kaleidoscope last year around MaxL that goes into quite a bit of depth re encryption and a whole bunch of other MaxL goodies.
To download it, go to www.odtug.com, click on Tech Resources, Essbase/Hyperion, and use the search box for MaxL.
There are two presentations, one by Tracy McMullen and the other by me. Tracy's is a good introduction to the various command groups; my presentation focused on a few areas in depth, one of which was encryption. The title is "Master Essbase with MaxL Automation".
You will need to join ODTUG to download the presentation, but there is a junior membership that is free.
Regards,
Cameron Lackpour
P.S. ODTUG Kaleidoscope 2010 is coming up in two weeks, starting on 27 June 2010 -- for those of you still on the fence, it is an awesome conference and I urge you all to come. The content this year will be fantastic.

How do I execute a returned sql string from a function on the command line?

Hi,
I have written a pl/sql function that will dynamically create a sql select statement. I need to be able to execute this statement from the command line. e.g from sqlplus
Say my function is called "sql_create" and it returns "select * from customer"
How do I execute the returned value from the command line?" Is it possible?
SQL> select sql_create from dual;
SQL_CREATE
select * from customer
SQL>
So I try:
SQL> exec execute immediate 'select sql_create from dual';
SQL>
I don't get an error but I don't get the result set either.
Is there a command I can use instead of execute immediate?
thanks,
Susan
Edited by: Susan123456 on Jul 2, 2009 1:21 AM

depends on the frontend. Most frontends (like Java and .Net) know how to handle REF CURSORS. Instead of returing a "string" which represents a query, return a ref cursor
SQL> ed
Wrote file afiedt.buf
1 create function sql_q return sys_refcursor
2 is
3     rc sys_refcursor;
4 begin
5     open rc for select * from emp;
6     return rc;
7* end;
SQL> /
Function created.
SQL> var r refcursor
SQL>
SQL> exec :r := sql_q
PL/SQL procedure successfully completed.
SQL> print r
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        900                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1700        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1350        500         30
      7566 JONES      MANAGER         7839 02-APR-81       3075                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1350       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2950                    30
      7782 CLARK      MANAGER         7934 09-JUN-81       2551                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3100                    20
      7839 KING       PRESIDENT            17-NOV-81       5100                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1600          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1200                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81       1050                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3100                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1400                    10

Javadoc command line options

I have a custom doclet which generates xml output instead of the default ouput from javadoc.
I am trying to pass custom command line options to my custom doclet class.
The following is my javadoc command:
javadoc -classpath c:\junit\junit3.8.1\junit.jar;C:\j2sdk1.4.1\lib\tools.jar -doclet DocGenerator -dest c:\docgen\temp C:\DocGeneratorTest.java
When i use the above command i get the following error:
javadoc: invalid flag: -dest
I am trying to access the value of dest in my custom doclet.
Regards
-rv

Perhaps the following will help. It explains how to use command-line options
Any doclet that uses custom options must have a method called
optionLength(String option) that returns an int. For each custom
option that you want your doclet to recognize, optionLength must
return the number of separate pieces or tokens in the option. This page gives an example:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/javadoc/overview.html#options
-Doug Kramer
Javadoc team

JMS Message Export/Import XML on command line

I need a command line (JAVA or WLST) to reproduce the Weblogic consol JMS message export and import to migrate manually message from a queue to another (online without filestore).
There is an entry on the Weblogic console that export one or all message to an XML format file and the import command to reload this XML file.
any idea of a java code used by the console or a jython fonction ?

The following might be enough to get you started:
For scripting and tracing examples, see the July 29th and August 10th 2009 newsgroup post with subject "Example using of getMessage(s) with JMS error queues?" [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3657916] and the June 10th 2009 newsgroup post with subject "JMSDestinationRuntimeMBean - possible STATE values " [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3531603 ]. Also take a look at the +Sept 23 2009 newsgroup posts with subject "Enable JMS - Queue/Topic Trace on console"+ [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3782486].
+WARNING: Exporting too many messages at a time can cause out-of-memory errors.+
Tom

What is command line in smartform?

Hi
Can anybody tell me what is command line in smartform?
<MOVED TO CORRECT FORUM BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 20, 2008 8:43 AM

A command node is a special type of node in smartforms which can be used to trigger page-breaks etc:
http://help.sap.com/saphelp_nw04/helpdata/en/70/e17a37dec511d3b575006094192fe3/content.htm
Regards,
Ravi

Passing command line argument in java

I was writting a calendar pogram that took user input from the command line. What I want to know is how can I write my program so that if the user doesn't enter the info. it will automatically assign a value to the variable in the array, eg:
if they typed: java calendarmonth 10 2005
they would get a printout for the calendar month of October 2005, but I want it so that if they typed
java calendarmonth 10
it would automatically assign they year to be the current year, and if they typed
java calendarmonth
it would auctomattically assign the current month and year to the program, heres the source code:
import javax.swing.JOptionPane;
import java.util.*;
public class calendarmonth {
     /** Main method */
     public static void main(String argv[]) {
          String monthString = argv[0];
          int month = Integer.parseInt(monthString);
          String yearString = argv[1];
          int year = Integer.parseInt(yearString);
          printMonth(year, month);
          if (month > 12) {
          System.out.println("Invalid Number Please Try");
     //code to perform OK action
          /** Print the calendar for a month in a year */
          static void printMonth(int year, int month) {
               //Print the heading of the calendar
               printMonthTitle(year, month);
               //Print the headings of the calendar
               printMonthBody(year, month);
          /** Print the month title, e.g., May, 1999 */
          static void printMonthTitle(int year, int month) {
               System.out.println(" " + getMonthName(month)
               + " " + year);
               System.out.println("------------------------------");
               System.out.println(" Sun Mon Tue Wed Thu Fri Sat");
               /** Get the English name for the month */
               static String getMonthName(int month) {
                    String monthName = null;
                    switch (month) {
                         case 1: monthName = "January"; break;
                         case 2: monthName = "February"; break;
                         case 3: monthName = "March"; break;
                         case 4: monthName = "April"; break;
                         case 5: monthName = "May"; break;
                         case 6: monthName = "June"; break;
                         case 7: monthName = "July"; break;
                         case 8: monthName = "August"; break;
                         case 9: monthName = "September"; break;
                         case 10: monthName = "October"; break;
                         case 11: monthName = "November"; break;
                         case 12: monthName = "December"; break;
                    return monthName;
/** Print month body*/
static void printMonthBody(int year, int month){
//Get start day of the week for the first date in the month
int startDay = getStartDay(year, month);
//Get number of days in the month
int numberOfDaysInMonth = getNumberOfDaysInMonth(year, month);
//Pad space before the first day of the month
int i = 0;
for (i = 0; i < startDay; i++)
     System.out.print(" ");
for (i = 1; i <= numberOfDaysInMonth; i++) {
if (i < 10)
System.out.print(" " + i);
else
System.out.print(" " + i);
if ((i + startDay) % 7 == 0)
     System.out.println();
     System.out.println();
/** Get the start day of the first day in a month */
static int getStartDay(int year, int month) {
//Get total number of days since 1/1/1800
int startDay1800 = 3;
int totalNumberOfDays = getTotalNumberOfDays(year, month);
//Return the start day
return (totalNumberOfDays + startDay1800) % 7;
/** Get the total number of days since Jan 1, 1800 */
static int getTotalNumberOfDays(int year, int month) {
int total = 0;
// Get the total days from 1800 to year - 1
for (int i = 1800; i < year; i++)
if (isLeapYear(i))
total = total + 366;
else
total = total + 365;
// Add days from Jan to the month prior to the calendar month
for (int i = 1; i < month; i++)
total = total + getNumberOfDaysInMonth(year, i);
return total;
/** Get the number of days in a month */
static int getNumberOfDaysInMonth(int year, int month) {
if (month == 1 || month == 3 || month == 5 || month == 7 ||
month == 8 || month == 10 || month == 12)
return 31;
if (month == 4 || month == 6 || month == 9 || month == 11)
return 30;
if (month == 2) return isLeapYear(year) ? 29 : 28;
return 0; // If month is incorrect
thanks
/** Determine if it is a leap year */
static boolean isLeapYear(int year) {
return year % 400 == 0 || (year % 4 == 0 && year % 100 != 0);
}

hey smallsouljah , to use code tags just put your code inside code tags.
to create code tags you just need to press the button code that is located bellow the subject, this will automatically create code tags.
System.out.println("testing");
try yourself.

How to programatically start j2ee application/service from command line

Hi all
We have developed a j2ee application and deployed the .ear file on SAP J2EE (Netweaver'04) engine.
We are able to successfully start/stop the application from Visual administrator -> Deploy -> Service -> Start application (or) Stop application.
We need to start and stop the same application programatically or via command line instead of doing it from VA. Any thoughts from anyone on how to do it ?
Thanks in advance.
Regards
Nagesh

The cammands are there in the respective folders, these are just the batch files / .sh scripts that can be run from command line.
/usr/sap/<instance>JC<client>/j2ee/admin
go.sh and go.bat can run either on command line
j2ee/configtool
configtool.sh / configtool.bat
similarly for other smaller utilities. For the main server, the related commands are in exe directory of sapmnt
/sapmnt/<instance>/exe
Regards,
Nitin
Edited by: Nitin Mahajan on Jun 16, 2009 11:16 PM

How do I cancel a rman job from command line?

Hello to all,
I am having some problems with a rman job that is running via OEM-GC. I get an error message regading the SPFILE and control file being locked due to another job accessing it. I found this in the RMAN ref guide:
To determine which job is holding the conflicting enqueue:
1. After you see the first RMAN-08512: waiting for snapshot controlfile enqueue message, start a new SQL*Plus session on the target database:
% sqlplus sys/sys_pwd@prod1
2. Execute the following query to determine which job is causing the wait:
SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2;
You should see output similar to the following (the output in this example has been truncated):
SID User Program Module Action Logon
9 SYS rman@h13 (TNS V1-V3) backup full datafile: c1 0000210 STARTED 21-JUN-99
Solution
After you have determined which job is creating the enqueue, you can do one of the following:
* Wait until the job creating the enqueue completes
* Cancel the current job and restart it once the job creating the enqueue completes
* Cancel the job creating the enqueue
So with this in mind; How do I cancel the job from RMAN command line!!!
This is my output by the way:
SID User PROGRAM MODULE ACTION Logon ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK
475 SYS [email protected] (TNS V1-V3) backup full datafile 0000018 STARTED16 23-APR-09 00000023EB8D488 000000023EB8D4A8
475 CF 0 2 4 0 113123 0
Any help will be gratefully received
Thanks to all that reply

I used the following to get the spid and killed the process on the OS.
set linesize 120
col sid for 999
col username for a14 trunc
col osuser for a18 trunc
col spid for 99990
col logon_time for a12
col status for a9 trunc
col machine for a26 trunc
col running for a10 trunc
select s.sid
, s.username
, s.osuser
, s.machine
, s.status
, p.spid spid
, to_char( logon_time, 'Mon dd@hh24:mi') logon_time
, rtrim (s.module)||decode( nvl(length( rtrim(s.module)),0),0,'',' ')|| upper(s.program) running
from v$session s
, v$process p
where ( p.addr = s.paddr ) and s.type!='BACKGROUND'
and upper(s.program) not like '%CJQ0%' and s.program is not null and s.username is not null
order by s.sid;

BUILD ERROR in command line

Hi, I'm taking the CDJ-310A - Developing Applications for the J2EE Platform course and have run into a problem when issuing a call to asant. When I run asant test the message it gives is "Ant could not find the task or a class this task relies upon.".The errors I get refer to the junit package.
I've check the CLASSPATH and it seams ok:
D:\labs\FJ310\bankproject>javap junit.framework.TestCase
Compiled from "TestCase.java"
public abstract class junit.framework.TestCase extends junit.framework.Assert im
plements junit.framework.Test{
public junit.framework.TestCase();
public junit.framework.TestCase(java.lang.String);
public int countTestCases();
protected junit.framework.TestResult createResult();
public junit.framework.TestResult run();
public void run(junit.framework.TestResult);
public void runBare() throws java.lang.Throwable;
protected void runTest() throws java.lang.Throwable;
protected void setUp() throws java.lang.Exception;
protected void tearDown() throws java.lang.Exception;
public java.lang.String toString();
public java.lang.String getName();
public void setName(java.lang.String);
D:\labs\FJ310\bankproject>javap junit.textui.TestRunner
Compiled from "TestRunner.java"
public class junit.textui.TestRunner extends junit.runner.BaseTestRunner{
public static final int SUCCESS_EXIT;
public static final int FAILURE_EXIT;
public static final int EXCEPTION_EXIT;
public junit.textui.TestRunner();
public junit.textui.TestRunner(java.io.PrintStream);
public junit.textui.TestRunner(junit.textui.ResultPrinter);
public static void run(java.lang.Class);
public static junit.framework.TestResult run(junit.framework.Test);
public static void runAndWait(junit.framework.Test);
public void testFailed(int, junit.framework.Test, java.lang.Throwable);
public void testStarted(java.lang.String);
public void testEnded(java.lang.String);
protected junit.framework.TestResult createTestResult();
public junit.framework.TestResult doRun(junit.framework.Test);
public junit.framework.TestResult doRun(junit.framework.Test, boolean);
protected void pause(boolean);
public static void main(java.lang.String[]);
public junit.framework.TestResult start(java.lang.String[]) throws jav
a.lang.Exception;
protected junit.framework.TestResult runSingleMethod(java.lang.String, java.
lang.String, boolean) throws java.lang.Exception;
protected void runFailed(java.lang.String);
public void setPrinter(junit.textui.ResultPrinter);
But still these errors still are produced:
D:\labs\FJ310\bankproject>asant clean
Buildfile: build.xml
clean:
[delete] Deleting directory D:\labs\FJ310\bankproject\build
[delete] Deleting directory D:\labs\FJ310\bankproject\jar
BUILD SUCCESSFUL
Total time: 0 seconds
D:\labs\FJ310\bankproject>asant
Buildfile: build.xml
prepare:
[mkdir] Created dir: D:\labs\FJ310\bankproject\build
[mkdir] Created dir: D:\labs\FJ310\bankproject\jar
compile:
[javac] Compiling 6 source files to D:\labs\FJ310\bankproject\build
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:9: package junit
.framework does not exist
[javac] import junit.framework.*;
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:11: cannot find
symbol
[javac] symbol: class TestCase
[javac] public class BankMgrTest extends TestCase {
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:15: cannot find
symbol
[javac] symbol : class Test
[javac] location: class bank.BankMgrTest
[javac] public static Test suite() {
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:16: cannot find
symbol
[javac] symbol : class TestSuite
[javac] location: class bank.BankMgrTest
[javac] return new TestSuite(BankMgrTest.class);
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:20: package juni
t.textui does not exist
[javac] junit.textui.TestRunner.run(suite());
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:39: cannot find
symbol
[javac] symbol : method assertEquals(java.lang.String,java.lang.String)
[javac] location: class bank.BankMgrTest
[javac] assertEquals("Fred", data.getFirstname());
[javac] ^
[javac] D:\labs\FJ310\bankproject\src\bank\BankMgrTest.java:40: cannot find
symbol
[javac] symbol : method assertEquals(java.lang.String,java.lang.String)
[javac] location: class bank.BankMgrTest
[javac] assertEquals("Flintstone", data.getLastname());
[javac] ^
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] 7 errors
BUILD FAILED
D:\labs\FJ310\bankproject\build.xml:14: Compile failed; see the compiler error o
utput for details.
Total time: 4 seconds
my CLASSPATH it's ok, i added the junit.jar file path there, and still does not work
Any help solving these errors would be highly appreciated. I'm stuck right now. Thanks!

Talkabout wrote:
my CLASSPATH variable looks like this:
.;C:\Program Files\QuickTime\QTSystem\QTJava.zip;%J2EE_HOME%\lib\j2ee.jar;%PB_HOME%\lib\pbclient.jar;%JUNIT_HOME%\junit.jar;.
what's wrong? what i missed to include here? what is that ant,where can i get it, and how should i include in the CLASSPATH to be able to compile junit from command line?
Thanksdocumentation for "The asant Utility"
[https://glassfish.dev.java.net/javaee5/docs/DG/beaep.html]
which includes a link to Ant. Here's that link:
[http://ant.apache.org/]
You'll need to read the manuals.

Startup and shutdown from command line with version 9i

Hi, i'm an Oracle newbie. I heard it's possible to startup and shutdown an oracle (instance? or database? which one is it) from the command line.
A little background on what it is that I want to do:
I'm looking to backup a database by copying the files that make up the database to a location from where they will be commited to tape media. To do this I must shutdown the database, copy the files, and startup the database again.
At the moment the backups are full exports which I find unnecessary since it is a development database which is never used at night. It is therefore not an issue if we want to shut it down and re-start it after a few minutes. (I think it would take longer to export as opposed to copy the files right?)
I need help and advice :
1. Is my way of going about this correct ?
2. How do I startup/shutdown from the command line (sqlplus user/password command) or should I use another utility ?
Thanks,
Gabriel

set oracle_sid=ORCL ==> your database namethis is NOT always true. It's instance name. usually, we set instance name is same as database name.But we also can set instance name is different from database name.
for example.
C:\>oradim -new -sid abc123
C:\>set ORACLE_SID=abc123
C:\>sqlplus /nolog
SQL*Plus: Release 9.0.1.4.0 - Production on Tue Jun 20 22:40:59 2006
(c) Copyright 2001 Oracle Corporation. All rights reserved.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup pfile=E:\ora901DB\admin\init.ora
ORACLE instance started.
Total System Global Area 344748244 bytes
Fixed Size                   282836 bytes
Variable Size             184549376 bytes
Database Buffers          159383552 bytes
Redo Buffers                 532480 bytes
Database mounted.
Database opened.
SQL> select name from v$database;
NAME
DB901
SQL> select instance_name from v$instance;
INSTANCE_NAME
abc123

Junit command line

Similar Messages

Maybe you are looking for