Just bought macbook air; had macbook macbook with Tiger software. What is best way to upload photos to icloud on old computer without upgrading it's software? thanks.

just bought a macbook air upgrading from old macbook with Tiger software; what is best way to take photos from old backbook to icloud so I can see them or download on the new air; Have an external harddrive backup. photo library is too large to transfer directly.thanks.

Memory size has nothing to do with it. I can open my 60GB iPhoto library with only 8GB RAM. Perhaps you have an incompatible version of iPhoto under Tiger with iPhoto under ML.
As to downloading different photos from iCloud, you would do the same if you ...
* open iPhoto under Tiger
* dump the photos individually in to a folder on your external hard drive
* shut down everything on the old MacBook
* connect the external hard drive to new MacBook
* open iPhoto on new MacBook
* import the photos in the folder on the external hard drive directly in to the new iPhoto
IOW, you need not use iCloud (even if you could, which you cannot) to swap photos as you propose.
If you are at a loss for space on your external hard drive for whatever reason (perhaps that external hard drive is a full Time Machine partition), I recommend that you buy another external hard drive just for your photos.
JJW

Similar Messages

  • HT1766 Has anyone else had a problem with their phone after using the cable to upload photos from Camera stream to computer photo program?  My phone is frozen, cannot get into use phone, cannot connect to the Internet, and even APPLE is stumped.

    I only have my IPhone5 for two months and am very upset that now they may need to give me a new phone and lose anything that may not have been recently backed up by the phone.  Has anyone else had this problem?  How did you reseolve it?  Hard reboots did not help.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?

    I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?  I get an "X" when trying to copy to the "automatically add to itunes" folder on the 2nd computer.

    ok... so i i just made sure all my music is all together in 1 folder and i am going to trash my old music folder that is in the itunes folder... and follow your directions - let itunes start w/new library and bring my music in. Well, last little hurdle/question. I noticed that the place where my itunes library is - on an external drive doesnt have much space left on it. The place where i gathered all my music together in order to start fresh - is a different external drive and has LOTS of free space on it.
    SO... i now would like to just keep all that freshly compiled clean music right where it is but in advanced preferences I want to point to that new folder on the drive that has so much more space. So... should i delete the old music then go into itunes with a blank library and change the folder in preferences - quit and go back in and then follow your steps to loading my music? If i change the setting of where itunes looks for the music - that doesn't wipe out the old stuff... it just mixes it all up together right? I dont want that!!
    i promise this is the last question - i would love to fix this problem tonight and just be DONE!
    Thanks in advance for your patience and knowledge!!
    Lisa

  • Auditing with trigger. Whats the best way?

    Hello,
    I would like to record any change in my data using triggers.
    For Example, I have the following tables:
    create table members
    ( member_id number,
    name varchar2(100),
    password varchar2(100),
    address varchar2(100),
    some other attributes ...
    and
    create table members_audit
    ( counter_seq number
    stamp date,
    action varchar2(1),
    member_id number,
    name varchar2(100),
    password varchar2(100),
    address varchar2(100),
    some other attributes ...
    Now, I would like to create a trigger that records and saves every change.
    But only if there has really something changed.
    Therefore, I got to compare every single OLD variable with the NEW variable. Is there a possibility to simply pass every single colum of the OLD variable and the NEW variable in a loop?
    Do I have to create an extra trigger for each table or can I do something like this:
    Create the following trigger for each table:
    CREATE OR REPLACE TRIGGER my_trigger AFTER INSERT OR DELETE OR UPDATE ON [every_table] FOR EACH ROW
    The whole auditing-table name is put together using the table name plus "_audit":
    So, for example if I have the table "members" the trigger auditing table should be "memebers_audit". My auditing table for the table "customers" is "customers_audit". I do not want to create a trigger for every table manually.
    Can I create a trigger on the whole schema?
    How can I solve this problem?
    Thank you in advance,
    Christian

    Thank you Justin and zsirotic for your answer.
    Justin, with your statement:
    You may be able to create a script that generates the CREATE
    TRIGGER code for you, though.What did you mean? Is it possible to use such scripts with oracle? Whats the name for that? For what keywords I have to look after?
    Or did you mean to write just a simple shell script that produces the needed code?
    I thought to use the Workspace manager, but this is a feature only oracle has. And we don't know at this time clear that we will stay by oracle all the time.
    So I will write on Trigger for every of the nearly 200 Tables in 7 user schemas ... Thats a much of work. Okay, but it will be the fastest solution because the triggers are compiled only once I think.
    Is it possible to write such code in the trigger:
    insert into members_audit values (DEFAULT, SYSDATE, 'U', old.*)
    Is there somethin like the old.* or will I have to write:
    insert into members_audit values (DEFAULT, SYSDATE, 'U', old.member_id, old.name, old.password, old.address, old.some other attributes ...)
    Thank you,
    Christian

  • I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

    I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

    iOS: Device not recognized in iTunes for Mac OS X

  • I just got the newest macbook air and it came with messages beta, how do i get rid of it?

    I just got the newest macbook air and it came with messages beta, how do i get rid of it?

    If the MBair has Mountain Lion installed then iChat has been replaced with Messages. (It's no longer in beta).

  • Yesterday I bought a macbook air and It came with a mag safe of 60w and I have understood that comes with a mag safe with 45w

    Yesterday i bough a macbook air and it came with a 60W charger (mag safe)
    I have understood that cames with a 45W charger.
    Can i use the 60W to charge the macbook air??

    And does its fake??
    Because i have understood that always cames with 45W , AND WHY FOR ME 60W??
    Does normally come 60W or 45W?

  • Does anyone know when Macbook Airs had matte screens?

    I own a mid-2011 13" Macbook Air.  I purchased this computer through th Apple website and went through all of the customization options maxing out whatever was available to me. At the time, there was the option to choose a matte or a glossy screen (this is not offered now - just glossy). I chose matte because I had heard about eye strain stories and was uninterested in a glossy screen, especially one just created with a coating (not glass). I have used my computer ever since and it definitely had a matte, anti-glare screen. Nothing like the glossy screens that are offered now. I recently had the screen replaced due to some problems, but they replaced it with a glossy screen. The Apple store is now insisting that it is impossible I ever had a matte screen, as it was never offered, and that I am just making this up, or too stupid to know what screen I was using for 2.5 years, or that it's actually the same screen and I just think it's glossy now because it's "new". I am extremely upset that I'll have to be using a glossy screen now, but more upset at the way Apple has treated me over this.
    I wanted to see if anyone else has a non-glossy Macbook Air screen (not a screen protector/anti-glare filter cover thing) or knows anyone who does. My screen did not have the sharp reflections that it does now, I saw it next to a glass screen every day that I used it and the difference was striking.  I could sometimes get the purplish not-sharp reflections that did not impede viewing, but nothing like it has now. If anyone else had/has a screen on their macbook air that was anti-glare/matte, please let me know. I know that the Apple Support page for this model of computer states it is only offered in glossy (then, and now).

    From
    MacBook Air - Wikipedia
    and
    MacBook Air Tech Specs
    it does not appear that MacBook Air has ever had a matte screen.
    Maybe the nature of the glossy screen has changed since 2011?

  • My new macbook air is not synching with my iPod classic anymore

    any ideas on why my new macbook air is not synching with my iPod classic anymore?  It used to just show up on iTunes but it's not there now

    iTunes will only transfer music from the iPhone that were bought at Apple's iTunes store. You'll need to use a third party program such as Senuti to transfer music you got from other sources.

  • My Macbook Air is running slow with Yosemite.

    My Macbook Air is running slow with Yosemite.
    I checked out most of the blogs and everything and have removed widgets from the notification center, but everything seems to run kinda slowly.
    Sure, i have the base model 2014 macbook air but that 4 gb ram should run a freakin finder just fine. I had Mavericks installed before, and with that, i could do everything. I even made cool music in GarageBand and nothing was lagging for me. Now i installed Yosemite... Everything is lagging. Scrolling seems like it happens around 10 FPS. That aint good man. Memory cleaner says around 1gb ram free when only the finder is running in the background (before it did around 2). I just uninstalled Memory Cleaner o I'm not looking at that little amount of memory. I don't know what to do now? I would appreciate it, if someone would help me. Otherwise, ill just wait for a new update.

    Since it's new I would take it back for repair or exchange under your warranty before bothering to read further.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it under your ID. In that case, contact iTunes Support.

  • Does MacBook Air 6,2 come with OS X Mavericks?

    I bought a MacBook Air a few days ago. Yesterday I was browsing through the App Store, and I saw "OS X Mavericks"...so I installed it thinking its an improvement on the system or something of that sort. However, after I'm done installing, I realized that basically nothing changed...so I thought that maybe MacBook Air 6,2 comes with it and I just installed it again...
    Does anyone know whether MacBook Air 6,2 comes with OS X Mavericks?
    And should I somehow uninstall it since it takes a lot of storage?

    lrqrachel03 wrote:
    So I basically installed OS X Mavericks again when it is already installed?
    How can I uninstall the OS X Mavericks I installed afterwards without uninstalling the OS X Mavericks that came with the MacBook then?
    When you installed it again the original copy was replaced, you still only have 1 copy. There is nothing to remove.

  • My macbook air refuses to sync with a lot of projectors,,, ..

    My macbook air refuses to sync with a lot of projectors,,,please help ..will updating it to mountain lion os solve the problem

    My wife has a MacBook Air that is currently running Lion. However, it's original 80 Gig 4800 rpm hard drive was replaced with a SSD from OWC. It's performance with Lion is acceptable.
    If your MacBook Air had the optional SSD, you may also find that the Lion performance will be acceptable.
    You should make an external hard drive backup before uprading. You could also do a trial install of Lion on the external beforehand.
    http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Air-2008-Drive-I nternal
    It is true that older software written for the PowerPC platform will not run in Lion, as Rosetta is not available. However, there are increasingly newer versions of software that won't run in Snow Leopard. See: http://roaringapps.com/apps?index=a

  • HT4889 When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used!   I add up the size of Users, System, Library and Applications and it comes to 90GB.  What am I missing?

    When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used!   I add up the size of Users, System, Library and Applications and it comes to 90GB.  What am I missing?  How did I "use" up so much space in migrating from one Mac to another?

    Did you use the Setup Assistant available at the beginning of the new machine's setup process? Or did you use Migration Assistant later after you had set up the new machine?
    If you used Migration Assistant, you generally wind up with two accounts (the new one you set up on the new machine plus the old one you ported over) - that may explain your excessive use of space. In that case, you can either manually combine/remove all unnecessary duplicate files, or you can start over by using Command + R, wiping your drive, and downloading the OS. Once it's downloaded, use the Setup Assistant offered at the beginning of the install/setup process.

  • I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    Technical issues aside, there's still a legal issue.
    Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
    If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
    http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
    If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
    http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
    Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

Maybe you are looking for