Just need abit of info about air

Hi All,
I want to make a app but i am abit unsure how air works. The way i mean is i will have a db on my server with the infomation ( user login details , and posts etc) but if i was to use the db inside air how will the info sync to the main db on my server etc. Also how do you make changing pages inside the air app smoother, i mean i have created a test app but the pages flicker when going onto that certain page, is it possible to use ajax to make the pages smoother while changing pages. My final question is it possible to call scripts from my server with the app itself and view the info in the app instead of the browser.
Any help will be great
Many Thanks
Paul

1. You would have to write (or find) code that synchronized the two databases.
2. I imagine there a number of clever things you can do to smooth or hide page transitions, but I don't have any specific recommendations. There's no magic "makePageLoadingSmoother" flag.
3. Yes, you can use XmlHttpRequest or URLLoader to make HTTP requests.

Similar Messages

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

Dv7-1451nr - I need more specific info about this note, cant find anywhere!

Whats the memory speed, whats the motherboard supported bus? Whats the motherboard?
Why there isnt many info about this note around there? Is it new? Terrible? Better options?

This system should be using using M780G Chipset and supports dual channel DDR2 800MHz...
If you want advance info on the system spec...try cpuz... http://www.cpuid.com/softwares/cpu-z.html
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

I have an iphone 4s that has been hacked. Apple support has suggested that a 3rd party software has been downloaded replacing apple software which enables the hacker to screen share. I need all the info about how it was done, and how to fix the problem.

I have an iphone 4s that may have been hacked. Apple support has suggested that a 3rd party software may have been downloaded allowing screen share. I need all the info I can get as to how this could have been done and how to fix the problem.

The only way the iPhone could have been hacked in such a manner, at least by any method currently confirmed, is if the iPhone was jailbroken. Was yours?

Hello, I need help with info about upgrading windows.

Hi, after having my PC for almost a year, I'm now I'm wondering if it's possible to upgrade my windows 7 32-bit to a windows 7 64-bit?
Here's a link to a website which has my PC and it's specs....
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6288750&CatId=4928#
If it is possible to upgrade my windows 7 32-bit to a windows 7 64-bit, then how do I do it? And what things will be required?
Thanks.

upgrade is the wrong word (you can't upgrade from 32 to 64)you can install 64 bit you can use the lenovo disc to just write over whats on your HDD or you can formate your HDD then install 64 bit using the lenovo media info is here http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002492 Edit: everything you need is on the disc...drivers & Apps, windows once you get it installed run system update to get system drivers up to date
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Need help with info about the possibility of altering images when saved in a different format

I am very new to the design world. I have a printing business and received and image to be printed in Adobe Acrobat (I think). I needed to resize the image to be printed and took it into Photoshop CS6 where I cropped the edges. I then resave it as a PDF and took into a printer software, Fiery. Fiery has an Impose function where you can repeat an image to layout it on the correct paper size. It essentially just copies the original image several times depending on the layout. This particular image I repeated to 3 up and 1 across. When printed it came out with a magenta streak through the center image only. I have had the machine checked and they are adamant it's not a printer issue but a software issue. That once I altered the original image by resizing it that I altered the image and that I can't expect it to come out as seen on the screen. I've printed it all sorts of different ways and it only occurs with the 3 up 1 across image. I know that images can be changed when saved from program to program but this situation does not make sense that it is only the one area and layout that this shows up. I would appreciate any help, input, answers that anyone has. Again, I'm new to this and would like to understand if this is a potential for further printing jobs so that I can do what I need to avoid this situation.
Thank you for your time.
Jessica

Jessica,
Without knowing how the original graphic was created it is hard to tell you how to handle it. What is the name of the file? (Only the file suffix is important). If the file's origin was in a drawing program and/Or InDesign, then the document should be handled differently if the document is a raster image best handled by a program like Photoshop.

In need of more info about creating a game

Well i posted before about making a simple 2d fps based game. I've read thorugh the java 2d+3d tutorials, and i really still have no clue where to start. Say i wanted to just start out with a flat, solid colored floor, with a rough shape of a person (just a square?) that is able to move. (not asking for any animation) Where should i start? I know about VirtualUniverse's, scene graphs, locals, e.c.t. but the tutorials never really telly you hoe to get started.

Man there is a book called Killer game programming by O-ReilyI reffered it and tell you this is the best you can have.
It will show step by step everything.
Another book which I recommend is Apress 3d game development

I just need a simple answer about audio being outa sync with video!!!!

I've been searching the forms but found no straight answer on how to make the audio in sync with the video when using videora to transfer movies. The movie plays fine until about 10 minutes, then it starts getting way off. I am tired so can someone come to my rescue?????????
Windows XP Windows XP Pro

The problem you are describing is a known issue with Videora. The author of the software even posted that problem on their website:
Known Bugs
Audio/Video sync
Problem - Output files can be out-of-sync. While no set pattern has been established, it seems to be more frequent with input files of 23.976 fps, non-DVD rips, and WMV/MPG filetypes.
Workaround solutions - Try the custom option '-async 1'. If the disconnect gradually increases over time, setting 29.97 fps sometimes gets rid of the problem regardless of the input fps. You can also use AviSynth to assume the FPS and have the audio sync to that. If it's a sudden disconnect, check your VOB Cell settings in DVD Decrypter settings per this thread. Otherwise, test with an AviSynth script per the DaProphecy's method in the FAQ. For non-DVD files, PSPVideo 9 may be a good short-term solution until the converter stabilizes some more or try something like AviDemux
I would suggest that you do some more research and switch to a different converter.

Need to get info about tabelcontent if exist or not

hi,
i´m trying to findout, if an tabelcontent exist (with
cfif) to make some choice if exist or not.
i need the simpel order in cf
isDefined or not isDefinet works only with
sessionvariables?????
thx

What is a tablecontent?

Need help with info about Z87 MPOWER MAX

Im coming from LGA 775. Dying for an upgrade. Im going with the intel 4770k and msi Z87 MPOWER MAX board. I noticed the board has two 8-pin cpu power ports. Why is this? Im using my old PSU which is a 1200 watt still kicking so im saving money here until a few more months...
So the real concern is I really don't know why there are 2 8-pin power ports for the CPU... Can anyhone school me on that please. Thanks in advance..

Quote from: Sea Dog on 29-September-13, 14:15:14
Both EPS/ATX headers on the mainboard are to better the balance the CPU power load. The Z87 Power Max is a high end enthusiast board for serious OC'ing, etc. If the PSU does not have the ability to provide both headers, an Athena YEPS828 splitter works very well.
Some PSUs don't have the ability at low power, especially in sleep or hibernate type modes to fire up the system again. A fan connected directly to the PSU eliminates, in some cases, this problem.
Hi Sea Dog,
My mpower max will sometimes not boot up - when I press the power switch there is no response at all, no fans. Usually when this happens, both the red and blue leds (which indicate which gear the OC Genie operates at) are lit.
I get the system to boot by removing the 24 pin power cable, removing and replacing one stick of ram, hook up the power, then I can use the switch to turn on as normal.
My psu is Corsair AX1200 and is not very old. Do you think I am having the problem you mentioned? or some other issue? Bios is latest, 1.6
Thanks

Needed info about io devices and cpu without using prtdiag

Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nagesh

yep.... prtconf -vp | grep <wot u r looking 4>

Info about oracle 7 and forms

I need manual or info about forms. I use a forms with oracle 7
over AIX.
thank in advance
gabriel

Are you after any specific info releated to Forms and/or Oracle
7?
sandeep

Sharing some info about Export dumps

Just to share some info about exports happenig in our system
I have a 20GB Database but the dump size is 10GB it keeps growing..the data too grows but the dump has also getting increased significantly...
Has anyone seen encountered soemthing like this...
Strange but to live with it
Oracle 8i on Win2k

Is this your Production Database? Did you schedule this export? During peak/off peak business hours? Production
Yes
Off Peak hours
Apart from this export, what database backup procedure you have in place? Full Backups/Incremental all in place
You said, you take export regularly as part of procedure. Is this a strange behavior today or did you observe this previously as well??I have been observing since i joined this company.It was 14GB and Dump was around 7 ..now the DB is 20GB and dump is around 10GB
I was just thinkking for a TB database how much the export would be...:)
Adding on i had a 100Gb db generating 8Gb dump...Looked strange..)BUt that 100GB did not have so amny objects like what i have now...
Thanks

AVCHD clip's always needs to get rendered when inserting. Media info about .mts file attached

Hi
I have previously discussed this problem in another thread. I have .mts files that I insert in a project (project preset set to PAL-AVCHD Full-HD)....when inserting i always need to render the clips and as many peole have mentioned, this should not be needed, instead PrEl should take care of this by itself..and it really sunds weird if it doesnt...
So, why is this happen...i get so frustrated when I have to re-render the clips all the time, since also - it takes a looong time for jsut tiny tiny clips ? I posted the hardware specs I have two days ago in this same forum, and it looks from the answers I got that this hardware should be enough for not having to wait several minutes to jsut add a 6 second AVCHD clip ?
Please look at below image that is a screenshot from MediaInfo about the details for my .mts file I'm trying to add - resulting in new rendering needed, plus the fact that it takes about 5 minutes to render it ??
Please, suggestion or solutions ? I'm lost...I got feedback yesterday that this is a known problem with both PrEl 8 and PrEl 9 ..that AVCHD clips needs to get rendered manually when they are added....i.e a known bug in these versions ?? Any experience ? How can I move forward, I have problems to understand that such bug should exist without anysolution and/or workaround since I see this as a feature that MUST work for people not getting crazy :-)
MediaInfo screenshot (click on image to get it to look better) BR /Helmut

Hi Neale
many thanks for your time trying to help me out.....
Please see my answers below in bold, hope you and/or someone else can help me with some further answers
Are you opening a project created in PRE8 with PRE9? If yes, that is the most likely cause of the problem. Create a new PRE9 project and see if the same problems after you import the clip and save the project. No, I'm only working in Pr 8.0 - I have this problem as soon as I add a clip..not that into the different formats, just know that the best possible output from my camera (Canon HF10) should be AVCHD..thats why I added teh detailed info from "MediaInfo". can you tell from that info I'm correct, i.e that the .mts file is really AVCHD as expected ? Just to help me confirm that. So, I havent been using PrEl 9.0...another person two days ago told me that PrEl 9 also got similar problems as I reported for my PrEl 8.0 ?
When you first added the clip to your project did you receive any messages that the file was not suitable for the format? If so did you accept the offered preset? If you didn't start a new PRE9 project and this time accept the offer. No, I did not get any messages as all about the format. Occasionally I get something like "Do you want to fix the quality in the clip" ..cant recall exactelly what the message is, but its for sure nothing about the format
When you put it into the project, did you have a red line running the length of the timeline? If you do then your preset is not correct (this is purely PRE9. PRE8 always required rendering AVCHD footage).Yes, always when I add a clip I get this red line. If I understand everything correctly this means I have to hit ENTER key to create a preview file....thats my second problem - as soon as I do that, it renders the clip very very slowly although I should have prety good hardware (According to spec posted two days ago).
So, as a summary. Do you think that buying Premiere Elements 9.0 should get rid of this problem when adding AVCHD ? If that is the case, I feel I just want to be sure about this and that I will not experience the problem again. Can it not just be some setting that is, by default, not correct in Premiere El 8.0 that is causing this or is this really a known bug without fixes available from Adobe?
Best Regards
Helmut

Need some info about Equium A60

Hi,
I am looking to upgrade RAM on my laptop which is a Equium A60 (PSA67E-001004NO). I need to know what speed my motherboard supports... I posted a question some time back and got the impression that my laptop can take 533mhz but I enquired other places and got the idea that my laptop supports 333mhz. I need to know the correct value my motherboard supports. Whether its 333mhz or up over..
One thing more I need to know is there any way one can check for the configuration that laptop has, because there is nothing about this Equium on the net or Toshiba site...
I remember to see a page on which all hardware and preinstalled software details of Equium A60 PSA67E-001004NO were on the net but I fail to remember where I saw it..
Can someone help in any way?

Hi
Your notebook has 256MB internal memory and just one slot is available for memory expansion. I have found info that your unit can handle with 1280MB max.
The compatible memory modules are:
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
If you want check part numbers on Google and you will find out all info about those modules. I have no time now to check it for you.
Bye

Just need abit of info about air

Similar Messages

Maybe you are looking for