Just opened a new blank document in Pages (iWork 2009). When I try to type a letter (any letter of text) the computer just "dings" and types nothing.

Just opened a new blank document in Pages (iWork 2009). When I try to type any text, the computer just "dings" at me and types nothing.

Probably you have opened a blank Layout template which requires a Textbox for you to type into.
Open a blank Word Processing template instead. The two types are listed in the Sidebar of the Template Chooser.
Peter

Similar Messages

When i click on a link on a website it opens a new non working white page on (MAC) when i know the link works

when i click on a link on a website it opens a new non working white page on (MAC) when i know the link works

It sounds like your computer may be infected with some sort of a virus / Malware.
I suggest the following resources:
[[Is my Firefox problem a result of malware |Is my Firefox problem a Result of Malware]] is a Mozilla Support article with some good tips on avoiding and fighting malware.
To double check your system is clean, do the following (Not official Mozilla advice, just good practice from personal experience)
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
Double check for all Windows Updates.
Also, I noticed you have the coupon printer installed. I would go to Start, Control Panel, then programs and features and uninstall the coupon Printer from inside there. It can cause some problems with Firefox.
If you are still having problems with Malware after that, I would recommend either [http://www.bleepingcomputer.com/virus-removal/ http://www.bleepingcomputer.com/virus-removal/], or having your computer cleaned by a professional.

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do?

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can't open a new blank template in Pages?

When I open Pages to choose a new blank template I get an error message that states "Pages has either moved or been deleted". Anyone have any advice to help would be greatly appreciated.

Wendy,
Have you looked for Pages.app to see if it's been moved or deleted? Here's an example of using Finder to locate the app.
Regards,
Jerry

When I try to run video on any website, why do I get just the Flash Player logo?

And why is it so difficult to get an answer to this basic question? The problem started on this computer just a week ago; until then, YouTube and any other video-oriented website ran fine. Now every video I try to view comes up as a blank (gray) screen with the Flash Player logo Anin the middle of it. I've jumped through every hoop on the "Help" website, to no avail.

Read Before Posting: How To Get A Useful Answer To Your Question

Allowed pop ups but safari won't open my Uni website. It just opens a fresh blank page? Using sim not wifi would this have something to do with it?

I have a new iPad and am trying to open my Uni website. I have allowed pop ups but it just opens a new blank page. I'm using a sim not wifi, would this have anything to do with it?

Thanks again ...
This trouble is fairly new as I just got my MacBook Pro. It's been going on for 2 weeks or so. Prior to the MacBook I was using my old PC laptop and never had any difficulty.
Nobody else seems to be having this problem at school and IT is completely unhelpful. I've been told that nothing's wrong with the uni's internet/network, it's my laptop.
Could it be that the uni's network doesn't recognize my new Mac's IP address (I think that's right) and for some reason is blocking access?
As for the VPN idea - I think I get it. Can I set that up myself?

How to change the fonts (permanently) for new (empty) documents in pages

I am searching for a way to change the settings/preferences of Pages / Numbers and Co such, that the standard font is not Helvetic, but a font of my choice. I am used to this from the MS Office products in my job, but want to keep my Mac "clean" and "pure".
I know that I can create and save templates. But somehow I feel, it must be possible to just open an empty/blank document with the font of my choice.
Any idea?
Best regards
Diethard

--
--[SCRIPT setiWork_defaultfont]
Si vous choisissez "Pages" vous verrez:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_Helvetica-Bold" = "Helvetica-Bold";
"FONT_Helvetica-Oblique" = "Helvetica-Oblique";
"FONT_LucidaGrande" = "LucidaGrande";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_Helvetica"
éditez la ligne correspondante comme suit:
"FONT_Helvetica" = "nomDeVotrePolice";
Par exemple, pour utiliser Palatino, remplacez nomDeVotrePolice par "Palatino-Roman"
Enregistrez le fichier ainsi modifié par (cmd + S)
Si vous choisissez "Numbers" vous verrez:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_HelveticaNeue" = "HelveticaNeue";
"FONT_HelveticaNeue-Bold" = "HelveticaNeue-Bold";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_HelveticaNeue"
éditez la ligne correspondante comme suit:
"FONT_HelveticaNeue" = "nomDeVotrePolice";
Si vous choisissez "Keynote" vous verrez:
"STYLESeries2" = "Series_2";
"STYLE_None" = "Aucun";
"STYLESeries5" = "Series_5";
"STYLESeries3" = "Series_3";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_Helvetica" = "Helvetica";
"STYLE_Free Form" = "Format libre";
"STYLESeries1" = "Series_1";
"FONT_GillSans" = "GillSans";
"STYLE_Normal" = "Normal";
"STYLESeries0" = "Series_0";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
"STYLESeries4" = "Series_4";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_GillSans"
éditez la ligne correspondante comme suit:
"FONT_GillSans" = "nomDeVotrePolice";
Une liste de 564 noms de polices est disponible sur mon iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
Téléchargez:
ForiWork:despolices.numbers.zip
If you choose "Pages" you will see:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_Helvetica-Bold" = "Helvetica-Bold";
"FONT_Helvetica-Oblique" = "Helvetica-Oblique";
"FONT_LucidaGrande" = "LucidaGrande";
The font used as default for tables is the one whose descriptor is "FONT_Helvetica"
edit the line as:
"FONT_Helvetica" = "yourFontName";
For instance, to use Palatino, replace "yourFontName" by "Palatino-Roman"
Save the file (cmd + S)
If you choose "Numbers" you will see:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_HelveticaNeue" = "HelveticaNeue";
"FONT_HelveticaNeue-Bold" = "HelveticaNeue-Bold";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
The font used as default for tables is the one whose descriptor is "FONT_HelveticaNeue"
edit the line as:
"FONT_HelveticaNeue" = "yourFontName";
If you choose "Keynote" you will see:
"STYLESeries2" = "Series_2";
"STYLE_None" = "Aucun";
"STYLESeries5" = "Series_5";
"STYLESeries3" = "Series_3";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_Helvetica" = "Helvetica";
"STYLE_Free Form" = "Format libre";
"STYLESeries1" = "Series_1";
"FONT_GillSans" = "GillSans";
"STYLE_Normal" = "Normal";
"STYLESeries0" = "Series_0";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
"STYLESeries4" = "Series_4";
The font used as default for tables is the one whose descriptor is "FONT_GillSans"
edit the line as:
"FONT_GillSans" = "yourFontName";
A list of 564 names is available on my iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
Download:
ForiWork:despolices.numbers.zip
Yvan KOENIG (Vallauris, FRANCE)
5 mars 2009
on run
if my parleFrancais() then
set prompt1 to "Choisir l'application"
set prompt2 to "Choisir un modèle"
set prompt3 to "Choisir une localisation"
else
set prompt1 to "Choose the application"
set prompt2 to "Choose a template"
set prompt3 to "Choose a localization"
end if
choose the application *)
set theApp to choose from list {"Pages", "Numbers", "Keynote"} with prompt prompt1
if theApp is false then error -128
set theApp to item 1 of theApp
define some parameters *)
if theApp is "Pages" then
set permitted to {"com.apple.iWork.Pages.template", "com.apple.iWork.Pages.sfftemplate"}
set sub to "Templates"
set theStrings to "Localizable.strings"
else if theApp is "Numbers" then
set permitted to {"com.apple.iWork.Numbers.template", "com.apple.iWork.Numbers.sfftemplate"}
set sub to "Templates"
set theStrings to "Localizable.strings"
else (* it is "Keynote" *)
set permitted to {"com.apple.iWork.Keynote.kth", "com.apple.iWork.Keynote.sffkth"}
set sub to "Themes"
set theStrings to "fontsAndText.strings"
end if
choose the template *)
set p2f to (path to applications folder as text) & "iWork '09:" & theApp & ".app:Contents:Resources:" & sub
if 5 > (system attribute "sys2") then (*
it's Mac OS X 10.4.11 *)
set allowed to permitted
else (*
it's Mac OS X 10.5.6 with a bug with Choose File *)
set allowed to {}
end if
set p2f to (choose file with prompt prompt2 default location (p2f as alias) of type allowed) as text
choose the localization folder *)
set p2f to p2f & "Contents:Resources"
set p2f to (choose folder default location (p2f as alias) with prompt3) as text
open the localizable.strings file *)
tell application "Finder"
set nb to count of (files of folder p2f whose name starts with "localizable")
if nb = 1 then duplicate file theStrings of folder p2f (* as there is no backup, duplicate "localizable.strings" for safe *)
open file theStrings of folder p2f
end tell -- Finder
end run
--=====
on parleFrancais() (* Check if Pages is running in French *)
local z
try
tell application "Pages" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z = "Annuler")
end parleFrancais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France.) mardi 11 août 2009 11:29:14

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Can't access to several sites because when I click a link, or I insert login and password and clickto enter, it just open a new tab, either blank or the same as the previous. i.e., can't save my changes on FB, can't look for a location on googlemaps, etc.

I changed in about:config "network.protocol-handler.expose-all" setting it to "false" to allow me to use Sopcast player (which I added on "network.protocol-handler.app.sop"). But after that, every time I have to, i.e., look for a location on Googlemaps, when I entered it it just open a new tab with the same page I was in; every time I click on a link it doesn't redirect me, it open a new page; I can't save changes on Facebook because when I click on "save changes" it just open another FB home page in a new tab; same problem with opening my bank account, etc. Even here, I could not get in when I tried to login. Now I put back "true" on "network.protocol-handler.expose-all", but, of course, Sopcast doesn't work anymore. What can I do? I'm using Firefox 6.0.2 on Ubuntu 11.04. The Trubleshooting informations I attached here are those that gave me the problem, before I made the aforementioned changing going back to "true". Thank you

I think I may have found the problem. It's embarrassing to find it minutes after posting the message yet I tried to solve it off and on for three days! My brother who is a 20 year Mac user has been trying to help me too. I guess it's true what they say... sometimes it's better to be lucky than good. LOL
I turned off the parental controls. What I don't understand is that the no website restrictions box was checked. To me this means I should be able to go to any site I wanted. Can anyone explain why I couldn't got to a HTTPS page on a parental controlled account even though there were no restrictions placed on it?
It's late and I need sleep. I'll leave this open for now until I have more time to test it.

I was sent a .pages doc. When I try to open it with pages I'm told "You need a newer version of Pages to open this document." I have the newest version of pages on my computer. What should I do?

I was sent a .pages doc. When I try to open it with pages I'm told "You need a newer version of Pages to open this document." I have the newest version of pages on my computer. What should I do?

I wonder if you are running an OS earlier than 10.9.x? If so, you cannot run the *latest* version of Pages, which is 5.1. Apple is trying to get you to update your OS to 10.9 Mavericks and then get you to update (but defintiely not upgrade) your Pages version to 5.1. 5.1 is, in everything but name, beta software. It not only has many bugs, it also lacks more than 90 features that are present in version 4.3 ("Pages 09"). One workaround that is to open the file with Pages for icloud (this is explcitly beta) and click tools|download a copy in Word format. Pages 4.3, which is probably the version you have, can open Word documents. Get a cup of coffee or a glass of wine before starting Pages for icloud: it is s-l-o-w.

I downloaded the new Pages and Numbers through my app store but when I open my old documents, it still tells me my 30 day trial is over. How do I get the computer to automatically recognize the new applications?

More information: I have a 3 year old MacBook and had been using "Microsoft for Mac" until last week when I took my MacBook in for some upgrades- including the operating system Lion. I have been unable to use the Word, Excel, etc. programs because they are not supported on the new operating system... and I already used my 30 day trial of iWork when we first purchased the computer. I decided to buy Pages and Numbers through the App Store icon. When I open the Pages and Numbers under my Applications, I can get them to work. However, when I open old documents saved on my computer, they go into the 'old' iWork messages of that my trial has expired. How do I get the computer to automatically recognize that I've purchased Pages and Numbers?

You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

How can i open a new blank page, if i open a new tab??

how can i open a new blank page, if i open a new tab?? because if i click the plus "+" sign(at right corner) it open a website that i don't like.... please help meee....

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)

Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
(For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.)

Mixed bag 1.     I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computer it appears in the top menu line. 2.     Whenever I turn on the computer, a new blank document window in MS Word

mixed bag
1.         I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computerit appears in the top menu line.
2.         Whenever Iturn on the computer, a new blank document window in MS Word 2011 appears. I do not have this listed in the login items.
3.         I have a current model of Apple wireless mouse. It keeps getting stuck in text or e-mails and I have to somehowotherwise move the cursor to break it free.
Help with any of these will be appreciated.
BF

1.         I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computerit appears in the top menu line.
I've never heard of this software, and cannot find any reference to it online, which is a bit concerning. What is it supposed to do? There really isn't much need for security software on a Mac.
2.         Whenever Iturn on the computer, a new blank document window in MS Word 2011 appears. I do not have this listed in the login items.
In Mac OS X 10.7, any applications left open when you shut down or restart are re-opened at startup, and any documents left open in an app when you quit are re-opened when you launch them again. The former can be controlled by unchecking the box in the restart/shutdown alert:
You will need to do this each time you shut down or restart, it won't remember that setting.
The latter can be deactivated by unchecking the box in System Preferences -> General:
3.         I have a current model of Apple wireless mouse. It keeps getting stuck in text or e-mails and I have to somehowotherwise move the cursor to break it free.
That does not sound normal, but I don't use a mouse with my MBP, so I can't provide a solution, other than to try replacing the batteries in the mouse.

Just opened a new blank document in Pages (iWork 2009). When I try to type a letter (any letter of text) the computer just "dings" and types nothing.

Similar Messages

Maybe you are looking for