Just started with NetBeans IDE, need to capture all keyboard input!

Hello,
I discovered that I can only capture keyboard events when my GUI application has focus. Ok, but I need a functionality that can capture all keyboard input, even if my application runs in the background or in the system tray.
How can I achieve that?
Regards,
Mirza

I know...sorry, didn't mean to imply otherwise.Don't worry about it; I wasn't offended. (I didn't think that that was what you were tying to do.) I was trying to (subtly) take this a different direction. (Was going to write something Solaris specific or perhaps something in ASM that would effectively do what the O/P wanted. Seeing as how Key Loggers only serve one practical purpose - as far as I know - I just wanted to give him code that he could do nothing with.)

Similar Messages

JBoss Application server setup with netbeans IDE.

Hi All,
I need to configure the JBoss Application server with netbeans IDE. I have tried this scenario,
1) Unzip the jboss-4.2.2.GA.zip into jboss dir.
2) Selected the JBoss Application server 4.
3) And i have set the Installation location like this j:/jboss/jboss-4.2.2.GA. In this i got some problem.
The problem is: Next button did not selected.
Error: provide valid installation dir path.
How to resolve this problem? Can anyone give suggestions for resolving this error?
Its very urgent!!

A couple of things:
1. if you are using SJSAS 9.0 it's Glassfish v1 (not v2 - that's probably for the 9.1 version? I don't know, I'm running 9.0 and installs fine with Gf v1 - thanks for the tip, btw!)
2. as for the domain, just pick the default offered (unless you have some specific requirement) - in any event, it's under the domains/domain1 folder
you can always create a new one and register (it will have its very own folder under /domains) but given that's probably a dev box, I can hardly see the point (and when I did it a long time ago, it was more pain that any human being should be subjected to :-)
Finally, one cannot but wonder why on earth someone (at Sun) developed NB and put Sun Java Application Server (developed at Sun) as one of the options that won't work with SJAS 9.0+ (developed at Sun) but one has to instead choose Glassfish (developed at Sun) and that won't work if one chooses v2 instead of v1 if it's SJAS 9.0 instead of 9.1 (or vice versa)...
Don't these guys test the thingy with THEIR own stuff?
Don't get me wrong, I totally love Sun, and all the good stuff they come up with (NB, SJAS, etc. etc.) but done it properly it would help them to gain market share, now, wouldn't it?

I have sent files several times now and when the recipient clicks the link to open. it says page cannot be found. This just started happening. what needs to be corrected?

In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found. This just started happening. What needs to be corrected?

I can think of a couple of reasons for this behavior.
You inadvertently turned off the sharing for the files.
The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
Some things to try.
Have the user send the link back to you so that you can test it. Does it work for you?
If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
If you could get back to me with answers, perhaps we can get to the bottom of this.

I cannot attach pdf files in Outlook. Just started yesterday. I need a fix as I use this alot.

I cannot attach pdf files in Outlook. Just started yesterday. I need a fix as I use this alot.

You can experiment with how Firefox would run after a reset or reinstall by creating a new profile.
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
You'll click the Create Profile button. I recommend using the default location suggested (in other words, don't click the button to choose a different folder). Then start Firefox in the new profile you created.
After Firefox settles down, try Outlook. Any luck?
If it works, log out of Outlook, exit Firefox, restart it and check again. If it doesn't work the second time, one possible explanation is a a system-installed add-on getting picked up or activated.
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Problem with Netbeans IDE 5.0: Building Gui

Hello,
I have the following problem with Netbeans IDE 5.0 (I made the same with netbeans 3.6 and it works properly):
Step 1) Create a myJPanel class (new JPanel Form)
Step 2) make a simple operation on myJPanel such as adding a JTable.
Step 3) Create a myJForm Class (new JFrame Form)
Step 4) Adding a JPanel to myJFrame (default name jPanel1)
Step 5) Select JPanle1 within myJFrame and go to code-> custom creation code and write "new myJPanel();"
this should set the jPanel1 (and all its contents and behaviours) created
in step 4 equals to myJPanel();
Step 6) run myJFrame;
........ and nothing happens. It is dispalyed just a gray JFrame.
It seems that myJFrame is able to istantiate myJPanel() but is not able to paint it. what's wrong?
Hope you may help me,
thx

Unfortunately, Netbeans 3.6 files and Netbeans 5 files are not compatible. Except the Java source files, Netbeans uses other aditional files such as xml files etc for forming GUI and other reasons. I have also faced the same problem with you. Good luck.

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Java 1.4.2 with NetBeans IDE 3.5 - Error Message, please help

Hello, I have downloaded the "J2SE v 1.4.2 with NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the install finished it said there was an error and to please refer to the log file.
Here is what the log file says:
"Installing J2SDK..."
"Finished Installing J2SDK..."
(Jul 1, 2003 7:53:14 AM), Setup.product.install, com.sun.installer.InstallJ2sdkAction, err, Error occured while installing [0] -> D:\Program Files\j2sdk_nb\_uninst\custom-install.bat "D:\Program Files\j2sdk_nb\install.log" "D:\Program Files\j2sdk_nb\j2sdk1.4.2\" D: "D:\Program Files\j2sdk_nb\_uninst"
Now when I try to run "NetBeans IDE 3.5" I get an error message:
Cannont load jvm.dll
Does anyone know how to resolve this, I have tried uninstalling and re-installing and I get the same problem.
Thanks,
-Mike

Hello, I have downloaded the "J2SE v 1.4.2 with
NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the
install finished it said there was an error and to
please refer to the log file.
Does anyone know how to resolve this, I have tried
uninstalling and re-installing and I get the same
problem.
Thanks,
-MikeHi Mike,
Even I got a similar error message inspite of trying to re-install atleast 10 times! So I gave up and did this:
1) I downloded J2SE SDK 1.4.2 seperately.
2) I then downloded JPad Pro IDE (latest version).
Now both are working really fine for me. :-) Could'nt be bothered to try again and again.
Its up to you if you want to get the NetBeans installation done but all I wanted was a good IDE and the latest version of the JDK. I have been using it for the last 3 days and it is working perfectly fine!
Regards :-)
Vijay

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

Just started with logic exp 7

So I just started with logic express about 10 mins ago. I understand that no sound will come out without an interface. But when i opened an old garageband song i still couldnt get sound to come out. Anyway to get this to work.

quote: "So I just started with logic express about 10 mins ago"
Well, how about simply going through the tutorial song from the DVD along with the printed book, which explains quite nicely how basic things work..?
I have upgraded to LE7 last week, and although I'm already quite experienced with Logic Express 6, I found that performing the tutorial is a nice way to recall many things that can be done and one already forgot about it...

I own CS6 from DVD and have just upgraded (by paying) for Creative Cloud. Is there an upgrade price or do I just start with monthly/yearly subscriptions to CC2014?

I own CS6 from DVD and have just upgraded (by paying) for Creative Cloud. Is there an upgrade price or do I just start with monthly/yearly subscriptions to CC2014?

You get a discounted first year on your subscription if you own a previous product, which you should have been asked for when signing up.
Mylenium

Jrockit with NetBeans IDE

Have any body used Jrockit with Netbeans Ide.
I was trying to use netbeans 6.8 after installing it using ---javahome to Jrockit home
But was not able to make any project due error " not found JDK"
Have any Idea . plz help

I have modified the netbeans.conf file as discussed:
#netbeans_jdkhome="C:\Program Files\Java\jdk1.6.0_20"
netbeans_jdkhome="C:\Program Files\JRockit Real Time\jrrt-4.0.0-1.6.0"
When I go to Help->About this is what I see:
Product Version: NetBeans IDE 6.8 (Build 200912041610)
Java: 1.6.0_20; Java HotSpot(TM) Client VM 16.3-b01
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
Userdir: C:\Documents and Settings\smitj01\.netbeans\6.8
NetBeans is not running JRockit?

Need to capture all massages

Dear All,
I need to capture all bapi return massages along with some dynamic massages, with signal lights and need to display in alv grid display. Please let me know the procedure. If possible please send the code.
Thanks and regards,
Krish...................

Hi Krish,
          Move the lines of the return table of bapi to the i_message (internal table) follow the below statement.
APPEND LINES OF i_return TO i_messages.
refresh i_return[].
        then Loop at i_messages as given below.
LOOP AT i_messages INTO wa_messages.
      IF wa_messages-type EQ 'S'.
        l_error_code = '0'.
      ELSEIF wa_messages-type EQ 'E'.
        l_error_code = '1'.
      ELSEIF wa_messages-type EQ 'W'.
        l_error_code = '2'.
      ENDIF.
      CALL FUNCTION 'GET_IMAGE_ICON_CODE'
        EXPORTING
          error_code = l_error_code
        IMPORTING
          icon_code = l_icon.
      MESSAGE ID wa_messages-id TYPE wa_messages-type NUMBER wa_messages-number
                        INTO v_message
                        WITH wa_messages-message_v1 wa_messages-message_v2 wa_messages-message_v3 wa_messages-message_v4.
      wa_alv_messages-icon = l_icon.
      wa_alv_messages-message = v_message.
      APPEND wa_alv_messages TO i_alv_messages.
    ENDLOOP.
Decalartion for the function module parameters are as below:
DATA:l_error_code TYPE int1,
            l_icon TYPE tv_image,
          v_message TYPE string.
Use the above code, and if you still face any issue please revert back.

I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...

I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...Thanks! JP

Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file

Capturing all keyboard events.

I'm using the keyboard to control a mobile robot through a Java applet.
I also have lots of other buttons in the applet. I don't want to add KeyListeners to all of the buttons. So is there a way to directly capture all keyboard events? So that no matter which button has the focus, the keyboard events would be processed?
Thanks a lot!

I don't want to add KeyListeners to all of the buttons.You could use a single KeyListener and add it to each button.
So is there a way to directly capture all keyboard
events? So that no matter which button has the focus,
the keyboard events would be processed?I don't know if this works or not, but check out Toolkit.addAWTEventListener().

Just started Livecycle yesterday. Need help with Javascripting

I'm new to scripting in general, but have figured out enough to be dangerous in Acrobat. Unfortunately, Acrobat no longer fulfills the need I have for dynamic forms and I have started trying to figure out Livecycle. Is the scripting in Livecycle THAT different from Acrobat that I need to relearn the scripting I figured out in Acrobat? Below is an example. It is in a table where I am trying to determine height of instrument (HI) from the elevation (Ele) and the difference between back (BS) and fore sights (FS). Any help is greatly appreciated. Thanks!
This is the script I used in Acrobat and it worked:
if(this.getField("BSRow2").value) {
var add = this.getField("BSRow2").value + this.getField("EleRow1").value
this.getField("HIRow2").value = add;
} else {
var height = this.getField("HIRow1").value
this.getField("HIRow2").value = height;
This is the script I used in Livecycle and it doesn't
if(this.getField(BS).value) {
var add = this.getField(BS).value + this.getField(Row1.Ele).value
this.getField(this).value = add;
} else {
var height = this.getField(Row1.HI).value
this.getField(this).value = height;

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to
compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration:
<Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5:
cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
s\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find
symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
get this error message alot....well actually just
about everytime..
I got it working just once using texteditor but have
no clue how i did it that time...now nomatter what i
try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still
compile with this error..
if anybody with patience could tell me what i need to
do
would i have to configure java some more with
variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance
Well here is all that goes
As you said you were pretty new
I suspect the following error done by most of the novice programmers in JAVA
Where is the Greeter class ??
ok may be you must have defined it somewhere else
Mostly the Java Compiler hasnt found out your Greeting class
Try locating that " Greeter.java"
or mention it in an other file located in the same folder as "Newprog.java"
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();

Just started with NetBeans IDE, need to capture all keyboard input!

Similar Messages

Maybe you are looking for