Just updated my iphone to 5.0 now it wont sync my ringtones!! can i uninstall the upgrade to go back to the version 4

I have updated my iphone and now i am unable to sync my ringtones.... i have read the apple support and have tried all of the tips
uncheck and sync then re check ringtones and then sync again - No
tried making the ringtones again and saving to computer then drag and drop into iphone -  then sync -  NOTHING
.......My question is can i go back to the old operating system (at least i know that my iphone work ) or is there a fix to this problem yet
GRRRRRRR just want my ringtones back!!!!!!!
thanks chris

Backing up your photos to iPhoto on the Mac isn't "as a precaution": it should be totally normal behaviour. You wouldn't use a digital camera as the permanent and only location of your photos, so why would you treat the digital camera in your phone any differently?

Similar Messages

  • Hi, i just updated my iphone 3gs to iso5 now it will not activate ive ''try again'' alot but not getting anywere please help!!

    hi, i just updated my iphone 3gs to iso5 now it will not activate ive pressed ''try again'' alot but not getting anywere please help! i need my phone for work not had it too long and really annoyed lol thanks,

    Sorry, but Apple does not provide a downgrade path for iOS.
    Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
    Note that you will void the warranty and loose official support by Apple.
    Feel free to let Apple know at http://www.apple.com/feedback
    Anyway, give a try resetting all your settings:
    Settings > General > Reset > Reset All Settings

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • I just updated and restored my ipod and now it wont restore again, so i can use it?

    I just updated and restored my ipod and now it wont restore again, so i can use it?

    See:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • I just updated my iPhone to 5.0 and all of my apps are gone.  How do i get them back?

    I just updated my iPhone to 5.0 and all of my apps are gone.  How do i get them back?

    If you have failed to make sure that any apps purchased on the iphone were transferred to your computer before updating, then you will have to redownload.
    Open itunes store, click Purchased, under Quick Links.

  • I have just update my iphone 4 to ios5. i cannot find my photos anywhere can you help? Thanks

    i have just updated my iphone 4 to ios5. i cannot find my photos anywhere can you help? Thanks

    Hey Kate
    if you have backed up your iPhone, photos that were taken on the iPhone will be in the back up file. Any photos synced to your iPhone from a computer will need to be synced again. To restore your iPhone from a back up right click on the name of your iPhone in iTunes and select restore from back up.

  • I just updated to Lightroom 5.6 and now Lightroom interface is all in Chinese! How do I change it back?

    I just updated to Lightroom 5.6 and now Lightroom interface is all in Chinese!
    How do I change it back?  the Install Wizard was a mix of English and Chinese but after I finished the whole Lightroom is in Chinese!

    I downloaded it fresh right off the Adobe site and the InstallShield is still in Chinese!  I have shoots to edit this really sucks.

  • I just updated my phone and by mistake made a new apple id. how can i delete the new apple id and use my old one so i can access my apps? thanks

    I just updated my iPhone. it prompted me to create an apple id. not being sure i did create a new one. after my phone updated i realized what i did. how can i delete my new apple id and use my old one so i can get my apps? thanks

    Go to 'Settings' and 'Store' and then click on the 'Apple ID' and sign out and back in with your correct one.

  • TS1567 I updated my iphone 4s os and now it wont synch with itunes. I have installed the latest version of itunes on my pc and have tried restarting the apple mobile device but it is still not working Any suggestions?

    I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
    Claire

    Did "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
    Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device.  Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device.  If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.

  • Just updated my iPhone and all of my contacts are gone. What can I do to retrieve them?

    I updated my iPhone and it synced, downloaded, did something called restore, and told me I was finished. Now I have none of my original contacts. What can I do to get them back? I didn't click anything or answer any questions until the update was complete.

    Choose Go to Folder from the Finder's Go menu, provide /Users/ as the path, and move the files to your current home folder. Alternatively, open the Accounts or Users & Groups pane of System Preferences, unlock it, control-click your account, choose Advanced Options, and change the path to the home folder.
    (101989)

  • I have just updated my iphone to ios6 and now my music will not update?

    I have only heard bad things about the ios6 update, hence why i have been postponing up dating it.
    so i finally do update it and now this?!
    When i re sync the music it will not update at all :/
    if any one knows how to help it would be muchly appreciated

    See if this helps
    http://support.apple.com/kb/TS1559
    if not, it is a hardware failure. Contact Genius bar for evaluation and possible replacement.

  • HT1491 I just updated my iphone 5 software/firmware now my inapp purchase won't re install any one else have this problem never updating again

    Can anyone help to solve this ?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • HT4623 I just updated my iphone via itunes and now its unresponsive and has a usb pic and itunes logo displayed, but when I plug it in it is now unrecognizable by either computer or itunes?

    Wondering how to fix this?

    Inklz wrote:
    Wondering how to fix this?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Am using another laptop with older ffox. Desktop updated to ff 5 yesterday and now crashes so soon that I can't complete the process of seeking help on that machine

    using another PC because ffox 5 crashes so quickly and frequently that I can't complete this reporting process on the other machine. The signature code that appeared was nahojit:CodeAlloc::addMem()
    and one of the Crash IDs is shown below - I h ope I have copied it correctly.

    Triple-click anywhere in the line below to select it:
    { diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • I locked my Iphone 4s screen and it randomly wont turn on. you can hear all the sounds but wont work.

    The lock button is broken so i cant do the home button and lock button trick... Itunes asks for 'trust' when i connect to itunes but i cant allow trust if the screen does work... Ive been told to restore the phone but itunes wont let me. The phone isnt recognized by the computer either... I have no way to get to the apple store for help. Any ideas for this being an easy-fix problem???

    ive tried charging mine too.  the only recommendation i can give is to allow the phone to completely die, and not being able to access any apps or anything to kill the battery makes it a long, boring process that could take up to 2-3 days (depending on the battery life of YOUR phone).  im in the same situation, but my phone did flicker to life for 20 minutes or so, but then went back to the screen being a jerk.  the only reason im continuing to put my phone on the charger is to assure that it syncs with my icloud so i can just get this piece replaced simply and easily.

Maybe you are looking for

  • No PO Creation without PR release strategy

    Hi all, Is there any way of preventing a user from creating a PR on which no release strategy is applied (i.e. no release strategy exists for that user) and then creating a PO from it?

  • How should I configure my Xserve?

    We're adding an Xserve that will serve files off an Xserve RAID. I'm not sure how far I need to pimp the system, though. Is 2GB RAM enough? Since all the big file storage will on the RAID do I need more than one 80GB SATA drive?

  • Column headings in the procedure o/p

    Hi, Oracle 9i How to include column headings in the procedure o/p ? also how to view the procedure o/p in the toad8.5 Data grid instead of DBMS Output screen ? because when I execute the procedure it shows the o/p in the dbms output window but I want

  • How to use resource of in Webcenter Space into one of its Child Spaces

    I have a requirement for using the Spaces resources(Navigation Model,Skin ) that are created at the Sub Space level to be used in the Child Sub Spaces. For eg., Consider the example where i have a sub Space "A". This space has the Resources like navi

  • Doubt about transcoding

    Hi, We are implementing the IPCCX version 8.0.2 and I am the following doubt: For all inbound call that are forward to CTI Route Point (IPCCX) is open the transcoding session. I would like know it is possible not is use the transcoding. If there this