HT4623 I just updated my iphone via itunes and now its unresponsive and has a usb pic and itunes logo displayed, but when I plug it in it is now unrecognizable by either computer or itunes?
Wondering how to fix this?
Inklz wrote:
Wondering how to fix this?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Similar Messages
-
I have just updated my iPhone4 via iTunes, but the phone took so long to restart the program no longer recognises it. How can I reinstate the iphone with iTunes?
Hello Di57
If you are having issues with your iPhone not showing up in iTunes, then check out the article below to resolve the issue. Also check your iPhone to see if a prompt is asking to trust your computer.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.
Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.
-
Just updated my iPhone. iTunes won't recognize my iPhone. I get "internal device" problem.
Just updated my iPhone. iTunes won't recognize my iPhone. I get "internal device" problem. Help!
Haven't heard back from them. Took it the adapter to the Apple Store with one of the mics and the Blue Shirts said it was the proper adapter.
-
I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?
Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ... -
i cant update my iphone via itune. ERROR message 1015. have updated and done all the trouble shooting, still didn't work out. I tried, reinstalling everything, nothing happens, this is suck! can't use my iphone!
http://support.apple.com/kb/TS3694#error1
-
i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....
If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
If no luck try to proceed without entering the password. If you can get the iPad functional go into
Settings > ITunes and App Store and log in there.
If you can log into to your Apple ID there you will also need to go to
Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
Also
Settings > FaceTime > check or enter the email address you want to be reached by FaceTime. -
hi, i just updated my iphone 3gs to iso5 now it will not activate ive pressed ''try again'' alot but not getting anywere please help! i need my phone for work not had it too long and really annoyed lol thanks,
Sorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings -
i just updated my iphone to 5 and it switched to a different language. how do you change it back to English
Go to:
Settings (gear icon)
Scroll to General (gear icon) (Third option box from top)
Scroll all the way down > Select Third option from bottom (international)
Select first option (language)
Select English
Select Done -
I just updated my iphone to iOS7 and I cannot make calls or receive calls... any suggestions?
I just updated my iphone to iOS7 and I cannot make or receive calls... any suggestions?
Jessie...
Tap Setttings > Store. Make sure Music is switched on under Automatic Downloads.
To listen to your music tap the Music icon in the Dock on your iPhone -
i just updated my iphone to the latest update and my phone now has a picture of the connection cable with an arrow pointing to itunes. I plug it in and connect to itunes and nothing happens. HELP.
Hello JBH 1162
Check out the articles below to get your iPhone to show up in iTunes so it can be restored. Start with the first one to see if you can make any change to show up in iTunes and if it does not, then pick either the second or third article for the type of computer that you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
I tried updating to iOS6 via itunes bc my storage space was pass limit and now my phone is telling me it's in recovery mode and I need to restore it. I didn't back it up. How do I take it out of recovery mode and keep the information on my phone?
You cannot. If it is in recovery mode, the data is already gone.
Did you fail to make sure everything was on your computer before updating? -
HT4623 I just updated my iphone 4s and lost all my photos except in the photo stream.
I just updated my iphone, but lost all my photos except in the photo stream.... I did back it up before i updated. Anyone know where they could be?
/Are you using itunes or icloud backup? http://support.apple.com/kb/HT1766
-
I just updated my Iphone 4s to the new operating system but lost ALL MY CONTACTS on my phone. The contact list on my phone is completely blank. PLEASE HELP!
Hello 6underwood,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
Best of luck,
Mario -
HT4623 i just "updated" my iphone 3g
i just "updated" my iphone 3g with the ios6 but now i cannot activate it, and my sim card now shows a "no service" sign
Afhex wrote:
i just "updated" my iphone 3g with the ios6
No, you did not.
The 3G cannot be updated to iOS6 without hacking it.
If you hacked or jailbroke the device, that would explain the issue with activation.
A 3GS that has been previously hacked or jailbroken to unlock it will also have issues with activation.
Discussion of hacked or jailbroken devices is not permitted here.
Maybe you are looking for
-
I just got a new iMac and want to use it for iTunes. when i connect my iPhone how do i transfer everything in my iPhone to this new computer?
-
Vertical scroll bar disappears when I minimize the screen
I have Firefox 10.0.2. I do have a vertical scroll bar with both the up and down button; however, they all disappear when I minimize the screen. When I am in Ancestry, for example, when I minimize I get a horizontal scroll bar but there is no vertica
-
My 80 gig iPod was full, so I bought a 160gig. I just kept the 80 gig one with the songs on it and just recharged it. When I tried to re-sync it I was told 1 iPod per iTunes library. I tried anyway by just checking songs to be synced. Now my 80 gig i
-
Print to Video has sound, but just black on camera. What am I doing wrong?
The video shows up on the Mac, but only sound shows up on the camera when I try to print to video. What's going on?
-
Null reference exception using Microsoft.Unity on DisposeOfChildContainer()
I am working on mvc application which also has webapi. Application is throwing System.NullReference Exception in production. (MVC 5, WebApi 2.0, .Net 4.5, Unity 3.0) Error message System.NullReferenceException: Object reference not set to an instance