Just updated to Firefox 29.01 it doesn't work at all. When i open it no sites will load it just shows the busy circle going around forever. It is unusable.

Firefox 28 was working fine, but when I was asked by a pop up upon opening firefox to update to 29.01 i found there were lots of security issues for 28 so i manually updated to 29.01 by going to "about, check for updates,etc." Once it downloaded 29.01, and told me to restart, I restarted firefox. When I opened it, I found it is unusable. It won't open a single website. It won't load my homepage. It has all my favorites from before on the favorites toolbar, but I can't go to anything. I closed it and tried to run cc cleaner as I always do, but I keep getting the message "firefox is taking too long to close would you like to force a shutdown" but the forced shut down doesn't close it either. I opened task manager to try and shut it from there, but firefox isn't showing up. I have no idea what to do. I am typing all this from Chrome b/c I cannot use the latest version of firefox.I've never had this happen before. I also ran it in safe mode and the same thing happened. Please help, and please answer in layman's terms, because I am not a computer expert. I took a couple screen shots I will attach. Actually i don't see anywhere to attach an image so I can't. I also don't understand the green "automatically add" button that is underneath this box on the mozilla support page. Also, when I went to the help, about page in the top corner of firefox just now to check the version it says "firefox is being updated by another instance." What the heck does that mean? Never seen that ever. Appreciate any help.

From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

Similar Messages

  • Where can I find this download...I just updated to Yomesite and I got this message:What is says is To open "Adobe Dreamweaver CS5.app" you need to install the legacy Java SE 6 runtine.

    Where can I find this download...I just updated to Yomesite and I got this message:What is says is To open "Adobe Dreamweaver CS5.app" you need to install the legacy Java SE 6 runtine.

    Hi zimieh. Do you get it by going to the app store and run update,. If not here is a link for the only java update I find for Yosemite.  http://support.apple.com/kb/DL1572?viewlocale=en_US&locale=en_US

  • Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks!  iMac, Mac OS X (10.9.4)

    Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks!  iMac, Mac OS X (10.9.4)

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I just updated my Mac Pro and it doesn't work

    The screen only has the apple icon and it doesn't work. Any thoughts? Ive restarted it twice (force quit) . Help?

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    1. Intel-based Macs: Resetting the System Management Controller (SMC).
    2. Repair the Hard Drive and Permissions - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    3. Re-download and reinstall Mavericks.
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My PC just updated and now my headphones jack doesn't work. Why is this?

    Everything was working fine until the update and I have no clue what updates were done. It was the mass that update when you go to close down the system.  I have a HP Pavilion dv6-3250us.

    Hi,
    Restore system to this point where you remember that everything was working without any problems.
    Resource:
    How to Do a System Restore in Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • I have loaded the latest update of Firefox 3 times, restarted my computer 3 times and when I open the browser it still says I have an outdated version!!

    There is not much more detail I can give! I have tried unsuccessfully 3 times to download firefox 5.01 for mac os. I appears that I have downloaded it and then when I go into the firefox browser - it still says I don't have the most updated version. It is very frustrating!

    Hello Karl, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
    #Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
    #Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.
    also you can try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) and check firefox again.
    (If works in Windows Safe mode then you have a problem with other software, like security software or maybe a system driver, that is running on your computer).
    thank you

  • IPhone 4: Just updated to iOS7.  Keyboard on calendar not working properly.  When "keys" hit, nothing happens.  When repeatedly hit, many letters suddenly appear.  Impossible to add anything to calendar.

    Keyboard not working.  Upon pressing a "key" one letter appears, then everything freezes while one continues to hit keys, then suddenly many letters appear.  Impossible to add any event to calendar.

    Same problem: Letter keys no longer register letters but other functions like "end", "home", opening web browser, etc.
    I need to be sure that this problem does not occur during an exam.
    Possible solution: (1) Press "shift" five times. (2) Click on "Go to the Ease of Access Center...." (3) Uncheck the "Lock modifier keys when pressed twice in a row" under "Options." (4) Click "Apply." (5) Restart computer.
    Please let me know if the solution works. It's too early to tell in my case.

  • Just Updated to Firefox 26.0...Hanging Worse Than Ever.

    I just updated to FireFox 26.0 a few hours ago, and now when I visit a site like Wonkette.com, the browser hangs are worse than ever before...and they were bad before. My browser is hanging (becomes completely unresponsive) minutes at a time before it either loads the page, or tries to load it and I get a script error (which takes more minutes to pop up while the browser's unresponsive) before it loads.
    God help you if you go anywhere with an IntenseDatabase commenting system or any kind of embedded video player. I have on no add-ons or plug-ins, so it is not that (and they are all up-to-date, anyway, but that's irrelevant).
    No, this is not something solved by going into Safe Mode - the seeming catch-all cure that never works, either - so don't even offer that up as a solution. Thanks.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • When I open Ical it doesn't work at all. It looks like there is a problem with this particular software. Any ideas?

    Hi there,
    I have a problem with ical. It doesn't seem to work AT ALL when I open the program.
    When I search for updates everything is up to date, so I imagine Ical should be installed again..(?)
    Not sure how to do this.
    Many thnaks,
    Caroline

    Final Cut Express was discontinued about 18 months ago, before the release of Lion (10.7).  It is no longer a supported product and was never supported on Lion, nor on Mountain Lion.
    While some FCE users have had success running FCE on Lion, many have reported problems including problems with chroma keying.   I do not recall any solution to the chroma keying problem, but you might try searching this Forum to see what others have discovered or tried.
    Final Cut Pro X is the app supported on Lion & Mountain Lion, and the future direction Apple has taken.  Since your computer lab has already moved to Lion (10.7.5) and presumably will move to Mountain Lion in the future, you should begin the process of moving to Final Cut Pro X.  I appreciate there are implications for cost, training, inconvenience and re-doing lesson plans.  But technology moves on and at some point we need to move with it too.

  • It simply doesn't work at all

    Quite strange: I have DW CS4 Build 4117 German on Mac OS X
    10.5.5. InContext doesn't work at all! Between "Spry" and "Data
    Objects" there is no "InContext". The manual and documentation
    explain everything detailed. I also downloaded the inContext
    tuturial, but nothing works! On the German Adobe webiste inContext
    is also advertised as included in DW CS4. So what's wrong? Am I
    missing something?
    Regards,
    Andi

    Thanks! I solved this issue by uninstalling and reinstalling
    DW CS4. It seemed like one of these typical Adobe problems when a
    beta was installed before. I had the English DW CS4 beta installed
    and just installed the German version without uninstalling the
    beta. Now everything works fine - quite. A lot of times when
    finishing any CS4 app the Adobe crash reporter pops up ;-)

  • Just updated to Mac OS 10.7.3 and each time I attempt to open Firefox I receive the message; "Firefox quit unexpectedly". Can't use FF!

    Just updated to Mac OS 10.7.3 and each time I attempt to open Firefox I receive the message; "Firefox quit unexpectedly". Can't use FF! Repeated attempts to open FF result in the same message.
    Downloaded FF again and the same message occurs.
    Safari, of course, works but that is not my choice.

    Hey b00m3r,
    Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
    There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
    Hopefully this helps!

  • Mozilla firefox 3.6.4 doesn't work with real player.because of this i don't want to update MF 3.6.3...What can i do

    mozilla firefox 3.6.4 doesn't work with real player...can't download any videos...what can i do
    == This happened ==
    Just once or twice
    == update to 3.6.4. version

    If you install 3.6.3 and don't want it to automatically upgrade you need to open the browser and select "Tools" from the menu bar. Go to "Options". Select the "Advanced" icon. Go to the "update" tab on the "Advanced" menu. Here you can configure how and what Firefox updates.
    Hope that helps.

  • I just updated my Firefox version to 3.6, but I can't find any detials in My Bookmarks now? Where are they?

    I just updated my Firefox version to 3.6, but I can't find any detials in My Bookmarks now? They are not in the Favorites folder which is in the local drive either.

    1. The version of Firefox that you posted here with looks like Firefox 2.0, based on the UserAgent string this forum read from the browser being used. Is that what you updated from? <br />
    ''See this to fix your UserAgent string - https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser ''
    2. If you ever used a Firefox 3.0+ version in the last three years and then went back to the Firefox 2.0 version, the 3.6 version you now have is using your old bookmarks file from when you previously had a Firefox 3.0+ version in use.
    3. Firefox doesn't use the IE Favorites folder for storing bookmarks. Firefox bookmarks are stored in the Profile folder, in the file format appropriate to the version of Firefox being used. Firefox 2.0.0.x and earlier versions, it was the '''bookmarks.html''' file and in Firefox 3.0 and newer version, it is the '''places.sqlite''' file.
    4. What do you want to do as far as bookmarks go? <br />
    Import your IE Favorites into Firefox 3.6? <br />
    Or, restore the bookmarks that you were recently using in Firefox 2.0?

  • HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

    The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Game Center and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Just updated to firefox 3.6.8 and now my laptop's hard drive failed after subsequent firefox crashes.

    I just updated to firefox 3.6.8 this morning after getting prompted to update as I started firefox. The firefox update successfully installed page said that I should update to the latest adobe flashplayer, so I did that as well, although that installation failed for whatever reason. I figured that I would update it later. I started watching live streaming videos on a website, and it was working for awhile, but firefox started to not respond. I tried opening up task manager, but even that started to lag and took minutes to open. The problem seemed resolved for awhile, but firefox started to not respond off and on, task manager stopped responding completely, explorer crashed, and my computer blue screened. It wouldn't even get off the blue screen after minutes of waiting, so I shut my laptop down manually. I'm positive that this couldn't have been a virus, since I only visited my usual websites, and I have both adblock plus and noscript installed. As for my laptop now, it won't boot to windows vista. I tried the hard drive test and failed. Now my laptop isn't even able to turn off no matter how long I hold down the power button. It's not an old laptop, so I doubt that it was just time for it to die.
    I have always been a fan of firefox, but this is just horrible. I don't know if it was firefox's fault but it sure seems like it...
    I'm currently on my older laptop, since my other one is obviously dead now. My broken one had vista installed and again, firefox 3.6.8 version.

    I have the same problem. I have never had a problem with Firefox before, and use it as my main browser. However recently, after updating to 3.6.8, its been crashing all the time. Up to 20 times an hour. Usually it occurs when I click a link from a Google search, or in Yahoo. Even if I send in a crash report and restart Firefox, it crashes as soon as the same page is brought back up, or the same link is clicked. I have also had it crash when completely idle. Its very frustrating as it is my favorite browser. I've resorted to using Google Chrome for the time being.

Maybe you are looking for

  • I'm trying to print from a full size 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer?

    I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

  • Problem in script format

    hi, i am having problem in script , the problem is s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            | 01     aaaaaaaaaaaaaaaaaaaaa      

  • Style a tag in htmlText problem

    I want to show an anchor as a standard blue underlined text. I created a style sheet in the mxml with this line: a:link{color:blue} and this a {color:blue} Nothing. All day I've been trying to make a link blue in Flex 2. Other things in the style she

  • Communication between BI70 and EP70

    Dears, After make the communication using SSO between BI70 (stack abap) and EP70 (stack java) we try execute a query using Bex, call the EP, but appear error message below; Portal runtime error. An exception occurred while processing your request. Se

  • Maps for Sports Tracker

    I've installed the App. Sports Tracker. It works fine, but I can't see any map. In the download picture there is a map in the screenshot. How can I get the data from the installed maps. Have I to download maps?