Just upgraded my workstation and render nodes to AE CC 2014 and now I receive a "render control file not valid" upon rendering out.

I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!

Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.

Similar Messages

  • Watch folder "render control file not valid"

    I'm using cc 2014 on my main workstation and render nodes. I can't get the render engine to accept a job because I get the "render control file not valid" error when setting the watch folder. But, I can use the render engine on my main workstation and the job will start just fine. That leads me to believe its a permissions problem, but all of my network computers are set up to work as a 3d animation render farm and it all works pretty well with all computers being able to read and write to each other with full permissions.
    Is there anything else I can look at that might help? Thanks in advance.

    > "Hello - is there any one left at Adobe  to help with this?  "
    This is a user-to-user forum, where people help out in their free time. If you want a guaranteed response from Adobe personnel, contact Adobe Technical Support:
    http://www.adobe.com/support/contact

  • Render control file not valid for" project.aep -- Please Help!

    I'm using AE CC
    I've read all the discussions I could find on this topic to fix this problem.
    All my computers are mapped correctly. The file that I'm sending at this point is very basic.  Once jpg sequence (as a test) name shadowMatte - no spaces, underscores, very basic.
    -The file is set for multimachine rendering in render queue
    -I collected files with 'Collect Source Files: None' , Enable  'Watch Folder' render' checked
    I'm not new to using multi machine rendering, this time around I just can't seem to get it to work...
    all render slaves at least 8 gigs of ram.
    Any help on this matter would be GREATly appreciated.
    - Max

    > "Hello - is there any one left at Adobe  to help with this?  "
    This is a user-to-user forum, where people help out in their free time. If you want a guaranteed response from Adobe personnel, contact Adobe Technical Support:
    http://www.adobe.com/support/contact

  • How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back

    How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back in and reentered it but that doesnt work.

    Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
    Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
    Hopefully this will get your messages sending/receiving to each other.

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer

    I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer.
    Now my computer is stuk on restart and wont turn on.
    Can somone help me with it?
    Thanks.

    If Mende 1's suggestion doesn't solve it you might find the following useful:
    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Hope this helps

  • I just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w).  any ideas why this would happen?

    i just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w).  any ideas why this would happen?

    Mavericks is the name of your operating system. It is otherwise known as OSX 10.9.
    The previous versions were indeed "cat things".
    The way you would know if you need to download new software from Epson is to go the Epson website and search for your printer there, look for downloads, and see if they have new software listed for 10.9.
    You can revert your system back to what it was two weeks ago. This would be easier to do if you have a backup that you made prior to installing Mavericks (like with Time Machine). If you don't have a backup (sounds like you probably don't), you can look here for some directions about how to go back to the "Cat Thing" that you had prior to installing Mavericks: How to revert OS X back from Mavericks: Apple Support Communities
    If all of this is too hard for you, you could take your Mac in to your Apple store and ask them to help you.

  • I just upgraded my iPhone 4 software to iOS 5.0.1 and I keep getting error -35 and it will not let me sync any apps, movies etc.

    I just upgraded my iPhone 4 software to iOS 5.0.1 and I keep getting error -35 and it will not let me sync any apps, movies etc.

    I had the same issue.  I closed iTunes, restarted the computer and then tried again. This time it would sync.  Another thing I tried was switching USB ports I was connecting through.

  • I just upgraded my laptop from windows 7 to windows 8.1 and did not realise I had to deactivate and reload Acrobat 9. Any suggestions about what I can do to get Acrobat 9 back and working?

    I just upgraded my laptop from windows 7 to windows 8.1 and did not realise I had to deactivate and reload Acrobat 9. Any suggestions about what I can do to get Acrobat 9 back and working?

    Hi Jon,
    Were you using Acrobat IX standard or pro version? Is Acrobat currently installed on your system?
    You can download Acrobat using one of these Links:
    https://files.acrobat.com/a/preview/1677e343-25c3-409b-a89b-d324552e07ce - Acrobat IX Standard
    https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html  - Acrobat IX Pro
    Please revert back if you face any challenges after Downloading and installing Acrobat IX.
    Regards,
    Rahul

  • I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?

    I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?

    Most likely the LCD Display connector simply came loose from its logic board connector. Take iPhone back to where it was repaired, and ask them to simply press the connector back into its place. Ask them to apply a bit of foam material or several small pieces of tape on top so the pressure of the flex connector plate holds it properly in place for the future.

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works in other p

    I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works fine in other phones.

    Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
    This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
    Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
    And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If  i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

  • I downloaded and installed Illustrator CS6 in Feb, 2014.  Now, when I try to open the program it is asking me to sign in for a trial use.  What happened to my software and how can I reinstall it?

    I downloaded and installed Illustrator CS6 in Feb, 2014.  Now, when I try to open the program it is asking me to sign in for a trial use.  What happened to my software and how can I reinstall it?

    CS6 or Creative Cloud Reverts to Trial Mode
    http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  • I getting mistake for Update Photoshop CC and AE CC, but Photoshop CC(2014) and AE CC is right. Why is happening?

    I getting mistake for Update Photoshop CC and AE CC, but Photoshop CC(2014) and AE CC is right. Why is happening?

    __imaster it looks like you received an error while attempting to apply the update.  I would recommend reviewing your installation logs for the specific error.  You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

    Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

    Hi trouble logging in,
    I checked your account and everything looks fine there. What happens when you log in directly to https://cloud.acrobat.com?
    Best,
    Sara

Maybe you are looking for

  • Two finger swipe on MacBook 5,2?

    Can I use a two finger swipe on an early 2009 MacBook? I know the trackpad supports only two fingers. I also know that there is a two finger gesture in Lion that allows you to see all the open windows not in mission control. Any thoughts? PS - I furt

  • How to revert back to the last version - I lost ALL most visited links and my Norton Safe master logon

    Please, I am partially handicapped, and with the new version 4.0, I have lost ALL my Most Visited links and history, plus my Norton Safe master log on manager is also gone. (Typing in difficult for me) Regretting this upgrade BIG time, I want to reve

  • TypeError :  air has no properties

    Hi guy! I tried to use trace function of air object My html file is : <html> <head> <title>Sandbox Bridge Test</title> <script type="text/javascript" src="AIRAliases.js"></script> <script type="text/javascript">                        function doLoad

  • Airport express has stopped working when college switched network to 'N'

    Hi all, My university has just switched their wireless to 'N'-band. My airport express ('G') is now upset: not only has airtunes stopped working (I previously had joined it to the dorm wireless network), but I can no longer even access my airport in

  • OracleDataAdapter.Update and ReturnProviderSpecificTypes

    Hello, I selected data to dataTable due to OracleDataAdaper with ReturnProviderSpecificTypes setted to true. I change some rows in this DataTable, so theirs RowState is Modified. Then I create new OracleCommandBuilder with this adapter a then I want