Just used migration assistant from one mac to another one. When I restart the new mac, the old user boots up instead of my new user. Have to log out then log in.

Just got a new Imac. I migrated from the old Imac. When I boot the new Imac, the old user screen boots up. I have to log out and then log into my new user on the new mac. Whats up?
Thanks.

Thanks for your help. But the PowerBook has a Migration Assistant designed for the purpose of transfering files from the old Mac to the new Mac. The steps take me to the point where I'm instructed to restart the old Mac while holding down the "T" key. But nothing happens when I do that. It just restarts and the Migration Assistant on the new Mac still reads "waiting for old Mac to restart".
There has to be a way to do this. I can't install the original applications on the PowerBook from scratch because they were meant to run on Classic. The PowerBook doesn't recognize any of the old Classic installation disks I have from previous Macs (Oddly, the PowerBook has capability to run Classic, but not the actual software-- and no Classic installation disk was provided, unlike the software provided for iBooks. And I can't install any of the System X upgrades because they need to recognize the original application already on the computer in order to upgrade.
I just calculated that if I have to rebuy all the applications I need, I couldn't afford to do it (unless someone can-- or even wants to-- take the old versions off my hands to offset the cost of buying new ones).
There must thousands of graphic designers like me who run a small business and can't afford to re-stock their entire software collection every time they upgrade to a new computer. Why would Apple diss the very people who have been supporting the company (actually keeping it alive) all these years? I don't think they would do that. I'll just have to keep looking for a solution.

Similar Messages

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

HT4889 I just transferred data using migration assistant from a macbook prop to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect.

I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?

Suggest you try the password for the Macbook, not the previous one.

How to use Migration Assistant from OS 10.7.5 mac to new mac Maverick?

Got a new imac. I'm trying to use Migration assistant from my non-Maverick imac to the new one. I'm told that I have to update my former mac, but it's too old to update to Maverick.
So, how can I use Migration Assitant to transfer files?
Thank you.

The easiest method is to use the Time Machine backup from your old computer and connect it to the new machine. Then launch Migration Assistant on the new machine and use the TM backup HD to migrate to the new machine. DO NOT do this wirelessly, your profile indicates you have a Time Capsule, if you use that for your TM backup then connect it via eithernet to your new iMac to do the migration.

Just used Migration Assistant but spotlight won't index files on new iMac computer.

I just used Migration Assistant to move files from my old 2008 Mac Pro to a new 2013 iMac 27" both Intel based. Files and applications all moved over fine and I can access them in Finder but Spotlight won't index the files. Should I be reindexing something or do I need to do somethign for spotlight to recognize the new filez I migrated?
Thanks!

You can force a Spotlight index, just let it run and your migration should be just fine. Instructions are in:
Spotlight: How to re-index folders or volumes located at: http://support.apple.com/kb/ht2409

Can u use Migration assistant from 10.5.8 to 10.7.2?

My new MacPro is OS X 10.7.2 and my old one is 10.5.8. Migration assistant does not work either from eithernet hookup or Firewire 800. Is there a software patch or update for either box to allow migration from Old OsX 10.5.8 to 10.7.2?

Yes, but you must use Migration Assistant from the new computer and boot the old computer into Target Disk Mode - Transferring files between two computers using FireWire.
Mac OS X 10.7 Help- Transferring files between two computers using target disk mode
How to use and troubleshoot FireWire target disk mode
OS X Lion- How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks

Just used Migration Assistant and can't access files, get message

I just used Migration Assistant to move files (per directions on screen) from my older iMac to new G4 running 10.4.1. It seems as though everything has transferred, but when I try to open folders that have migrated, I get a window that says, "The folder could not be opened because you do not have sufficient access privileges".
Is there a way to obtain these privileges? Not sure how to proceed. If not, should I scrap everything and just drag and drop files? I had hoped to preserve all of my settings, address books, older email (using macmail program), etc...
Any help is greatly appreciated!

Hello christine:
Do you really mean OS X 10.4.1? The current level is now OS X 10.4.11.
Try running permission repair from disk utility. If that does not work, I think I would do an archive and install on the G4:
http://docs.info.apple.com/article.html?artnum=107120
Than would install a pristine OS X (which would need to be updated while preserving your files, programs, and settings.
Barry

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Can I use migration assistant from a mac with leopard to a mac with tiger?

My old mac was upgraded to leopard, (don't ask me why), and I just got a new mac with tiger, although I ordered leopard up to date. Can I use migration assistant to move stuff from the old mac with leopard to the new mac with tiger, or do I have to wait until I get the copy of leopard? Plus, if I move files over now- like through email and/or network connection, and then when I get leopard and archive and install, what happens to my files?

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Problems using Migration Assistant from Tiger to Snow Leopard

I want to scavenge files and apps from a Power Mac G4 (PowerMac3,5) running Tiger 10.4.11 before I turn it out to pasture. Most of them were migrated years ago to another system and have been updated and upgraded over the years, but a few apps have no modern equivalent. Now I want to do one last "pull" to pick up anything left behind all those years ago, particularly apps for which the install discs are in deep storage at best and possibly discarded.
I'm trying to use Migration Assistant in a nearly virgin Snow Leopard 10.6.8 system (installed fresh from 10.6.3 retail optical disc, updated over the network, lightly tested). It has a single admin account, no other user accounts.
Possible complicating factors: the Snow Leopard system is Server running under Parallels 10.1.4 on Yosemite 10.10.2 on an Early 2008 Mac Pro (MacPro3,1) with third-party USB3 controller in a PCI slot.
At present, I'm using a portable drive with both FW and USB interfaces as an intermediate storage (FW on the G4 to clone the system drive, USB on the Mac Pro to connect it to the virtual machine). SL sees the drive just fine, can copy files from it, and can even run apps from it. Migration Assistant sees the drive and offers to migrate from it.
Two problems:
1. No matter what user(s) I select for migration, Migration Assistant tells me it is a duplicate account. Proposing an account name never used before does not help. As a result, no user files can be migrated. (Obviously, I could copy them in other ways, but I think MA should do a more thorough job.)
2. Migration Assistant offers to migrate absolutely no applications. Even applications that SL will run from the drive cannot be migrated. (Some are PPC apps, but SL will run them via Rosetta. Others are Universal apps.)
Am I expecting too much of Migration Assistant?
Is the Migration Assistant shipped with SL Server (and updated through Software Update) not capable of running under SL Server?
Should SL MA refuse to migrate any applications from a Power Mac, even Universal applications?
Am I missing something obvious?
Is there key information I have omitted?

markwmsn wrote:
...It's not the twenty bucks, it's the principle of the thing.
Not sure what you meant by that statement. Although this "principle" may be more important to you than the twenty bucks, I know that my time is worth more to me than your twenty bucks!
What apps are you using?
markwmsn wrote:
I was able to install Snow Leopard (client) in a partition, and it was able to migrate users and many applications from the G4 clone on the portable drive. Some of the apps even run.
Then I went back to my SL Server virtual machine and tried to migrate FROM the SL client partition. Migration Assistant showed the same symptoms as importing from the clone directly (no apps offered, bogus "dup user" errors). I am forced to conclude that either (a) Migration Assistant 3.0.4/1.1 is broken when run on SL Server or (b) my new SL Server installation is broken. I'm either going to have to boot back and forth to run the old apps or find their installation media and reinstall them in my SL Server virtual machine.
Even worse, I realized that one of the antique programs I still haven't dug everything out of is a Classic application that had to be kludged to survive Y2K!
Thanks again, MIchaelLAX.
Anybody else have any clever ideas?
So, glad to see that Migration Assistant did work for you in Snow Leopard...
More clever ideas:
Install Snow Leopard client in Parallels and use its Migration Assistant:
http://forums.macrumors.com/showthread.php?t=1365439
Here is a recent post I assembled for running Classic apps on Intel Macs:
With the newer Intel Macs, you have to run a Classic emulator such as SheepShaver, which requires you to extract the Mac ROMs from your older Classic Mac and then install Mac OS 9.
A related program is Chubby Bunny, which comes bundled with all of that included (google the term "Classic-On-Intel v 4.0.1 chubby bunny").
More information on SheepShaver:
http://www.emaculation.com/doku.php/sheepshaver_mac_os_x_setup
and
http://www.everymac.com/mac-answers/mac-os-9-classic-support-faq/run-macos-9-on- intel-macs.html
and more information about Chubby Bunny:
http://www.macwindows.com/OS9_on_Intel_Mac.html#092408b
and
http://hackthemac.blogspot.co.uk/2008/08/chubby-bunny-old-virtual-machine.html
Here is the Classic CD-ROM version of RISK II running in SheepShaver on my Lion Mac Mini:
[click on image to enlarge]

Using migration assistant from HDD only to SSD+HDD?

Hi,
Usually, when buying a new mac and starting it for the first time, I use the migration assistant to get everything (software, settings, data...) from my time capsule backup.
I am currently using an iMac 24'' which only has a "standard" HDD. I am however thinking about upgrading to the latest iMacs, potentially with the "SSD+HDD" option.
The description on the "Configure" page of the online store says : "If you configure your iMac with both the solid-state drive and a Serial ATA hard drive, it will come preformatted with Mac OS X and all your applications on the solid-state drive. Then you can use the hard drive for videos, photos, and other files."
My question is therefore the following : would the migration assistant be "smart enough" to place my OS and applications on the SSD drive, and the rest of my files ("videos, photos, and other files.") on the HDD?
Thanks in advance!

I had the same issue some time ago: I added a 32 gb SSD to my mac running leopard. Then wanted to use install Snow Leopard and use migration assistant to restore the sytem with Snow leopard and applications on the SSD, and the user folders on the old 250gb HD. Turns out this isn't possible. Manually accessing your time machine or other backup up to restore files by hand is a pain. Just installing Snow Leopard and pointing the user folder to the Leopard user folder on the HD creates problems too, just as pointing it to a newly created folder.
Solution:
-Backup your old system with time machine to an external disk
-Note: make sure you don't mix up SSD and HD in this manual.
-Install SSD (If this means you no longer have a cd drive, use a copy of snow leopard on an external drive).
-BE SURE YOUR OLD SYSTEM IS BACKED UP WITH TIME MACHINE.
-Then install OS X TWICE: once on the old HD and once the SSD. Wipe your HD with Disk Utility before install.
-Start up OS X on the HD, use the option key at startup if necessery to select the right disk.
-Use migration assistant to restore from the time machine backup. Now you have a fresh install of OS X, with your user files and applications intact.
-Now startup OS X on the SSD.
-Make the SSD startup disk in system preferences -> Startup disk.
-Go to System preferences -> Users. Unlock. Create an extra user, so you end up with a spare user account, and one you will actually use. Now right click on the user account thats going to be used, and select your user folder on the HD that you just restored with Migration assistant. Just leave the spare one. It is for emergencies and also disk failures: OS X is designed to have user and system files on the same disk, so you should always have one user account sticking those rules.
-Restart OS X on the SSD as asked.
-Now all thats left to do is migrate applications from the HD application folder to the SSD application folder by simply copy/pasting. This is trial and error, but in my case 90% of the applications gave no trouble at all. The ones that did are library based media applications like Aperture. All I needed to do is go to their preferences and point them to their old libraries on the HD. MS Office was the only application that needed full reinstalling. The applications that ship with the OS don't need to be migrated of course since they are already there on the SSD.
-Point your dock icons to the right folders (on the HD) and applications (on the SSD)
-Make a new time machine backup
-Last step, optional: clean up the HD. You don't need the system folder that is still there, but I chose to keep it for a while as a backup. I left the library in place there too, since I don't know which applications still use it, but in time I will clean it up too.
And one more thing: Since Migration assistant doesnt' just copy files, but also seams to adapt application databases of Apple apps to work with a newer version of an application coming with a new OS, such as Mail, Safari, iCal and Address Book, this is probably going to be the best way to upgrade an SSD+HD setup to Lion too. (Lion has better SSD support). Provided of course that Apple doesn't update Migration assistant, which is what should actually be done. Upgrading this way took me 2,5 hours, most of which was spent waiting ofcourse.
Message was edited by: jason487
Message was edited by: jason487

Using Migration Assistant from iMac G5 to Intel Core Duo

I've developed a problem while transferring files using Migration Assistant.
I've inadvertently created two accounts. I misunderstood what was going to happen when renaming one of them. I thought I had to change the old home folder/user name to avoid a conflict when creating a new Admin/user acct on the new computer .... don't ask!! So, I now have several folders: some that came on the new iMac, the others that read 'from the old Mac'. It's apparently the new login/acct name that's linked to the 'from the old Mac' files . Hope this is making sense.
If I go up to the top right menu and select the newly named acct., it rotates and brings up all the settings and preferences I wanted transferred and obviously were. If I use the old login name, it's just the basic iMac settings without my settings, prefs,etc..
How can I delete the basic acct. and use the imported settings/preferences? I want only one Admin Acct./log in with my imported settings/prefs. Do I delete folders and rename the 'from the old Mac' to just the folder name? I've read some of what Kappy has said aout migrating files from the G5 to the Intel, and I know he's an expert, he's helped me before, but in truth, I don't really understand what he's saying about how to migrate to the Intel.
Can someone offer some advice? I'd appreciate it.

You may not want to keep the Home folder you've migrated. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Can I do a clean install of 10.5 and use migration assistant from backup ?

I want to install OS 10.5 on to my Macbook. If I do a clean install rather than an archive and install can I then use migration assistant to transfer my accounts and emails from the cloned Superduper backup I have made on an external drive?
Or is Archive and Install better?

I think 99.9% of the people know what you want to do by "clean" (ie, erase or reformat) and that insures there aren't any file or directory problems when you start, that the new OS is all that will be taking up space. Clean has two connotations: Windows or OS 9. There are lots of words that are "no longer used" but everyone knows what "initialize" or reformat means and does.
If you said, "Scratch that" you could mean, "scratch that idea" even though you can't actually scratch anything. And the idea isn't in stone (scratch out) or written with a pencil where you could erase the word or line. Or draw a line through words to "scratch out the line." There can be multiple meanings. Some languages have 5 words for "blue" to denote different shades of blue, and meaning.
Your drive is 60GB which is on the small side so that is one more reason to reformat.
And because installers will create and delete a lot of files, and scatter around, I would do another SD backup (and leave your old backup as is) so you have a copy of Leopard you can boot from and that would be just Apple OS (maybe after applying the 900MB of updates required to get to 10.5.4+).
Migration Assistant has posed some problems for some with how account data is imported into a new group account. Check out http://www.macfixit.com

Using migration assistant from 10.4.11

I just bought a new Retina MacBook Pro and am trying to use Migration Assistant to migrate data from my old Macbook Pro. When I start it up on the old and new Macs, I get a message on the new Mac that Migration Assistant must be upgraded on the old Mac. Yet when I check for updates on the old Mac Tiger (10.4.11) it says none are available.
Please don't tell me I need to upgrade my old Mac to Lion before I can migrate my data? That would be a new low in Apple backward non-compatibility... (sorry, makes me grouchy).
thanks,
Scott

MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
http://www.bing.com/search?q=mac+os+x+migration+assistant
Mac OS X v10.6: How to use Migration Assistant to transfer files ...
support.apple.com/kb/HT3322Jan 18, 2012 · Mac OS X v10.6: How to use Migration Assistant to transfer files from another Mac. You can use Migration Assistant to transfer important information, such ...
How to use Migration Assistant to transfer files from another Mac
support.apple.com/kb/HT4889http://www.bing.com/search?q=mac+os+x+migration+assistant&qs=AS&form=QBLH&pq=mac +os+x+migrat&sc=5-15&sp=1&sk=#Apr 03, 2013 · You can use Migration Assistant in OS X Lion and Mountain Lion to transfer important information, such as user accounts, applications, network and …

Just used migration assistant from one mac to another one. When I restart the new mac, the old user boots up instead of my new user. Have to log out then log in.

Similar Messages

Maybe you are looking for