JWS Error MSG Inside

Below are the error messages that are being returned to me upon opening a linke to a .jnlp file on my Tomcat server. The JWS will load everything perfectly fine by clicking on a local copy of the .jnlp file, however, if I click a URL from the server pointing to the file that resides on the server (identical to the local copy in every way), it will give me this slew of messages.
Anybody have any clue?? This is my first deployed JWS application so it's possible I'm overlooking something obvious, but I've done some reading and haven't come up with anything so far.
***********Exception*************
JNLPException[category: Download Error : Exception: java.io.IOException: Server returned HTTP response code: 502 for URL: http://fmssql:8080/fms.jnlp : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getLaunchFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:536)
*********Wrapped Exception*************
java.io.IOException: Server returned HTTP response code: 502 for URL: http://fmssql:8080/fms.jnlp
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:709)
     at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:238)
     at com.sun.javaws.net.BasicNetworkLayer.doRequest(Unknown Source)
     at com.sun.javaws.net.BasicNetworkLayer.doGetRequest(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getLaunchFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:536)
**********Launch File*************
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0"
codebase="http://fmssql:8080/ "
href="fms.jnlp">
<information>
<title>FMS App</title>
<vendor>xxxxx</vendor>
<homepage href="http://xxxxx.com "/>
<description>xxxxx</description>
<description kind="short">fms</description>
<--<icon href="images/draw.jpg"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+" href="http://java.sun.com/products/autodl/j2se"/>
<j2se version="1.3+"/>
<jar href="fms.jar" main="true" download="eager"/>
</resources>
<application-desc main-class="com.fms.source.FMSApplicationMenu"/>
</jnlp>

In my reading I've uncovered that apparantly I need to add the .jnlp extensions to my webserver (Tomcat). Is this the right path or is it added by default? I'm using version 4.1.x.
Thanks,
David

Similar Messages

Error msg Parse Methode ist fu00FCr diesen Typ nicht mu00F6glich

Hi
I have an app which loads an interactive form the user fills out on his desktop. When loading this form I get an error msg inside my browser that reads:
Parse Methode ist für diesen Typ nicht möglich
or in English:
Impossible to use parse method for this type
Any idea why this happens?
An urgent reply would be highly appreciated.
regards
yuval peery

Michael hi
Tks for yr early reply.
I pasted the snippet you supplied into my FormView.wdDoInit().
Same effect. No help!
I almost know for sure that during object instantiation FormView should load the object put in pdfSource and then display it. I am not so sure how this is done.
Any further insight would be highly appreciated
mfG
Yuval

Error msg: Enter at least one condition item

Hi SAP,
I try to change (extend) rental end date but i received error msg "Enter at least one condition item":
Enter at least one condition item
Message no. 62226
Diagnosis
No condition items with a positive amount exist. Each condition header, however, must have at least one condition item.
System Response
The system may or may not carry out the function you selected. If the function cannot be executed, the system will output an error message indicating that a condition item is necessary.
Procedure
If the system does not execute the function you selected, you must enter a condition item or an amount for at least one condition item before you choose the function again. Each condition header must have at least one condition item at the latest when you save your inputs.
Actually i had maintained the condition type eg: Electricity (variable type) but with "$0" amount. But i have maintained the sales based rent inside the condition item with minimum rent $2.
My question, is there any way i can proceed with the rental end changes with the condition or scenario i mentioned above?
I will give points for those who help me solve this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
please use transaction FO38 (change active lease-outs) and there set the flag 'cond. not checked'. With double-klick on the flag you can make it changeable. Afterwards the error message should not appear anymore.
Hope that helps.
Regards, Franz

Error msg 0x80040fb3

Whilst trying to sync my Tour to my Outlook calendar, contacts et al, I got the above error msg. Poking around I came across a KB article that explains that 1) blank name/company fields are verboten and , incredibly, 2) certain characters in those fields are illegal.
Among the illegal characters are "," (comma) and "-" (em-dash)! I'm flabbergasted! Practically every entity, company, corporation, LLC, PLCC, etc ( not to mention law, engineering and accounting firms) are written with a comma preceeding the entity designation. So, too, suffixes such as Sr., Jr, Esq,, M.D., Ph.D., etc are genearlly preceeded by commas. And, those with hyphenated names are out of luck! Rhees-Jones will have to settle.
In order to sync without the error I had to manually check over 2200 contacts and change the offenders.
What programming genius made these rules? Should this have been anticipated in the programming?

Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB14818 "Error encounter. Error code – 0x80040fb3. Check documentation” appears during a wired synchronization with the BlackBerry Desktop Software
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error msg: Software to decode not on system

I am working on an Encore project. I created the project, imported audio/video to a timeline, saved it and closed it. I'm now attempting to reopen it, and I get this error msg: "The software that's used to decode the media is not available on this sytem. Installing the correct decoders for the files you are working with may help to correct the problem." Say what, I just created this project, worked on it for awhile, it seemed fine. What decoders are they talking about. Any help greatly appreciated. Thanks,
~Bond

Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Error msg in user exit

Hi all,
how to set the particular field in customer tab to be open/available for input after error msg is being triggered

> Hi all,
> how to set the particular field in customer tab to be
> open/available for input after error msg is being
> triggered
Hi,
To avoid this problem, put all the related fields in the tab inside a chain..endchain statement At pAI event of your screen program.
e.g.
PROCESS AFTER INPUT.
LOOP AT ITAB.
    CHAIN.
      FIELD MAKT-MATNR.
      FIELD MAKT-MAKTX.
      FIELD MAKT-MAKTG.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
Regards

A different error msg

Was using BB App World and received the following error msg: Problem readimg data frpm server and App World must exit. Error type: 100002 Has anyone else seen this? Know what it is/ why I received it? Thxs!
••€KTZmom_csr€¤
Solved!
Go to Solution.

Hmmm...could be a multitude of reasons...suggestions:
1) Hard reboot of your BB -- With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation
2) Make sure you have the most recent version of App World (there was a recent update). Find that here:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
As for why...well, it's a computer and subject to random events.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Photoshop CS2 (program error msg)... Help please!!

I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanks

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

ITune wont start geting a error, error msg says send error or dont send.

Hi,
Like the topic says, i have tryed to reinstal itunes but with same results.
error msg
AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 00000000
what shuld i do next need it to work so i can use my ipod.

let's first check to see whether or not that is associated with a broken QuickTime. (itunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

How to catch error message inside a variable?

Hi,
I'm trying to catch the error message inside a variable using this this command below:-
<%=odiRef.getPrevStepLog("MESSAGE")%>
Could you please tell me what is the right approach to capture the error message inside a variable.
Thanks
Anindya

Hi Bhabani,
I have done this and select an oracle schema.But the variables only captures the (null).Please look into this.You must have one step prior to this refresh variable. Then only it can get the status as given below.
Returns the one-letter code indicating the status with which the previous step terminated. The state R (Running) is never returned.
D: Done (success)
E: Error
Q: Queued
W: Waiting
M: Warning
If you want the complete error details then you will face issues in case of multi line message. For this best option would be jython variable.Could please provide me some idea how to use this jython variable.I will update you on this soon
Thanks
Anindya

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error msg 13019 please help

hi
i need help in getting rid of this error msg 13019. it started after downloaded a couple of songs. and it will not allow me to sync my nano ipod thanks

Ive fixed this issue before. The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.
p.s.s. To add your playlists back to iTunes:
-Click file at the top of the screen
--move your mouse over library, selecte import playlist
--on the new screen that pops up, navigate to your desktop
--open the playlist folder, select the first playlist, hit ok
--repeat for each playlist exported

Had this error msg in my application log:

Had this error msg in my application log:
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: ENGINE-ready: ready: 10820
BASEURL: https://ssunp03.company.com:8081
strURL: https://ssunp03.company.com:8081/cgi-bin/gx.cgi/AppLogic+EventServerManager
EventServerHttpInvocation > java.net.MalformedURLException: unknown protocol: https
**Out of memory, exiting**
ld.so.1: /pimcreg5/imc/nas/40sp3/nas/usr/java/bin/sparc/native_threads/jre: fatal: /pimcreg5/imc/nas/40sp3/nas/us
r/java/lib/sparc/native_threads/libjava.so: mprotect failed: Resource temporarily unavailable
Killed
Connected to LDAP server on ssunp03.company.com port 1390
[21/Feb/2002 02:42:49:1] info: ENGINE-class_loader_created: New class loader com.kivasoft.engine.EngineClassLoade
rNonVersionable@1c14d67f has just been created
Can anyone share with me his experience about ld.so.1?? What is it and why does it cause my apps server to reboot?

It looks like you might simply have run out of memory. It just looks like the JRE tried to adjust its memory map and run out space. When mprotect fails the problem probably isn't with the .so itself.
What are the memory characteristics of your machine? Including the heap and stack space that you allocate for your JVM, as well as the actual physical and swap space available on the server.

Error msg when changing the MRP type in ME22N

Hi,
When i change MRP type from MRP to Manual in ME22N, it will come out the error msg:Purchase request mandatory for MRP generated Purchase order (Application area: ME Message no. ME901)! My question is how to change this error msg to warning msg?
From SPRO-Material Management-Purchasing-Environment Data-Define Attributes of System Messages ,i can not find the entry regarding this issue.
Any suggestion!
Thanks!

Hi,
Sometimes end user want to add some item without PR under MRP PO.
As before system will only indicate the warning msg that we change to error msg three month ago, but i forgot how to change!
thanks!

Payroll Error msg "The gross wages do not cover the negative offset that has been forwarded, therefore, no grossup is permitted".

Hi Experts,
I am getting the below error msg while running payroll for an US employee.
"The gross wages do not cover the negative offset that has been forwarded; therefore, no grossup is permitted."
I am getting this error msg just after USTAX function processing part of UTX0 subschema. I am highlighting below facts & findings for your reference.
As per a client requirement, I have configured a new gross up WT (ER benefit contribution) for a benefit plan (IT 0168) and the changes are in QAS system. The changes have to be reflected in period 20/2014 (4th May'14- 10th May'14) with retro effective 01/01/2014 as per the benefit plan record maintained from 01/01/2014.
This error msg is coming only for few employees. In my example, when I am running payroll in period 20/2014 with forced retro as 01/01/2014, system is giving error in period 14/2014 (23rd Mar'14-29th Mar'14). When I checked the pay result of this employee for period 14/2014, I can see the /101 is in -ve value and there is claim generated for this period. So I think, eventhough, a value of $ 2.53 is getting added as per the IT 0168 record, its not helping to give a +ve gross value and thus tax is not able to recoved on the same.
I hope you have come across this issue and can help me to assist to resolve the error msg.
Regards,
Prakash

If you have correctly configured payroll the system should automatically off set that and should create wage tyes /561 or /563 in RT.

JWS Error MSG Inside

Similar Messages

Maybe you are looking for