K7N2G SP1 and USB !!

Hi,
I've just installed SP1a from windows to have access to the USB 2.0 but the problem is that when i have installed SP1 all my USB stopped working !!!!!!! none of them was working anymore so i uninstalled SP1 and it works again !!! How it is possible ????
I had a similar problem 6 months ago my USB were leaving and reappearing whenever they wanted !!!
Thanks for any idea
Rumps.
P.S. There is something strange happenning to my CPU fan it's making some strange noise since 1 week. Any idea ? I cleaned it 2 days ago and it is still making noise !!! Even if the temperature is around 55° when windows is working more if I play and the speed is around 4800 which is normal.
I have an AMD 2000+.

Hi,
Dunno about your USB .
If your CPU fan is making a noise then I would seriously consider changing it at your earliest opportunity! Also you say your CPU is running at 55°C this seems a little hot!
Axel

Similar Messages

K7N2G Series and additional VGA PCB

Hi Everybody
I do have the mother board in subject
My BIOS is set on High Performance acting the "Load High Performance Defaults" in the BIOS
CPU FSB Clock 166MHz
I'm using an AMD 25OO + as a CPU with 2 x 256MO in dual channel (purple and green socket)
Everything is working alright when I'm connecting my CRT to the integrated graphic Controller.
Then I remove the TV Out bracket, set the BIOS with "PCI/VGA Palette Snoop" on "enabled" and install an AGP Graphic PCB on the AGP Slot.
The result is that the Integrated Graphic desapear in the Control Panel. The result is strictly the same when I set the line "Init Display First" in the BIOS on "AGP Slot"
I Remove the AGP PCB and I verify that everything is coming back alright
Then I try to install a PCI graphic Controller
The computer just refuse to start unless I set, prior to the harware installation of the PCI Graphic Controller, the line "Init Display First" in the BIOS on "AGP Slot"
Reinstallation of the PCI Graphic Controller
The software this time refuse to start the PCB: Error 10 in the Control Panel
What can I do to have two monitors working with this mother board?
Thank you for your help

Good morning
Here is the copy of my IRQ table
You can notice thate some IRQs are not used
Noticing that I install my PCI Graphic Controller in the PCI N°3 and setup my BIOS in manual and force the PCI 3 With the IRQ 11
same results as prior
After a complete cleaning of the [C] partition I reinstall Windows XP again with SP1 and Diect X 9 Just reinstalling the drivers to avoid the interrogation mark in the Control Panel
no change again
Don't you think there is a lock somewhere in the mainboard ?
Here is the copy(sorry I was obliged to translate the text as it is not in English)
DMA
2 FLOPPY
4 Direct Memory access
IRQ
(ISA) 0 System clock
(ISA) 1 Keyboard
(ISA) 3 COM 2
(ISA) 4 COM 1
(ISA) 6 Floppy
(ISA) 8 System clock CMOS/Real Time
(ISA) 9 Compatible System ACPI Microsoft
(ISA) 12 Mouse Compatible PS/2
(ISA) 13 Arithmetic Coprocessor
(ISA) 14 Main IDE Channel
(ISA) 15 Secondary IDE Channel
(PCI) 10 Nvidia nForce PCI system Management
(PCI) 16 Associated Controller Universal Host USB VIA version 5 or more
(PCI) 16 NVIDIA GeForce4 MX Integrated GPU
(PCI) 17 Associated Controller Universal Host USB VIA version 5 or more
(PCI) 18 Host Extended Controller USB VIA
(PCI) 19 Host Controller Texas Instrument IEEE 1394 compatible OHCI (Open Host Controller Interface)
(PCI) 20 Host Controller USB open HCD Standard
(PCI) 20 NVIDIA(R)nForce(TM) Audio Codec Interface
(PCI) 21 Host Controller PCI to Extended Standard USB
(PCI) 22 Host Controller USB Open HCD Standard
(PCI) 22 NVIDIA nForce MCP Networking Controller
Thank you again have a nice day

Neo Platinum, WinXP and USB ports.

Righto, here's the thing. When I first got WinXP installed, I tried plugging in my Rio Karma to shuttle files from my old PC. I kept getting "High Speed Device plugged into Non-High Speed Port". I remembered seeing on the CD from MSI that you need to install SP1 for USB 2 to work, so I did that. Still got the message, no matter which port I tried (Front or Back headers, or the ports on the mobo itself). Then I deleted the ports in the Device Manager, and it redetected them. The mobo ports now seem to function as USB 2 ports, but the headers don't recognize my Karma at all now. WinXP just gives an unknown hardware message.
Anyone else run into this?

Quote
Originally posted by Okatha
Alright I think it's fixed now! I removed all of the USB devices, and then installed the fix off of the MSI CD. Though I thought I saw the same thing from the Windows Update site, but anyway. Glad it works. No unknown device message and no non-high speed message. That driver was a little difficult to find, had to navigate the CD a bit.
Could someone please tell me what fix is being referred to here? I am having the same problem that is described in this thread.
I have this in Device Manager:
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
USB Root Hub
USB Root Hub
USB Root Hub
I am running SP1 and I already have tried removing all the USB devices from device manager and letting windows redetect them, it just finds this same list shown above again. Shouldn't all the ports be 2.0? Also, I already have the USB hotfix installed from Windows Update.

TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.

Hi SBrwn,
Thanks for visiting Apple Support Communities.
The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
Follow these steps to reset the SMC on your iMac:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer. [by holding down the power button]
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find these steps and more information at this link:
Intel-based Macs: Resetting the System Management Controller (SMC)
All the best,
Jeremy

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

Discussion About The Use Of Project Server 2013 Timesheet Custom Billing Categories (Post SP1 and April 2014 CU Install)

In support of a consulting company using timesheet custom billing categories to designate project time as billable onsite, billable offsite, and non-billable, I've encountered a series of issues which appear to be associated with the custom billing category
timesheet lines. These issues cause timesheet users to get frustrated, and contribute to misalignment between project actuals and timesheet actuals. We're in Single Entry Mode, no pre-population, SP1 and April 2014 CU Installed.
I'll enumerate the issues here and pose the question to the community as to whether others are experiencing any/all of these things, and if so, ask if any workarounds have been discovered. We're working with Microsoft to validate these independently,
but I am posing the questions to the community to gather additional information, and hopefully save some folks time in troubleshooting similar issues.
1.When time is entered on an assignment into timesheet lines of multiple billing categories, only time entered since the last save is getting saved and ultimately sent, on timesheet submit, to the approval center. Although the previously entered and
saved time appears in the application interface when the timesheet is re-opened, only data since last save is actually saving to the server or processing through the approval center. We believe this is the primary cause for timesheet and project actuals
being out of alignment.
2."_ Error Loading". When assignments are added, deleted, or changed after a timesheet has been created, standard timesheet lines are added, deleted or changed (i.e. synchronize) with the assignments. However, for custom billing category
timesheet lines, they do not change when the assignments change, and they aren’t removed if the assignment is removed. We believe this causes secondary errors, like the "_Error Loading" (and others as will be described below).
3.When a timesheet with time in a non-standard billing category is deleted and recreated, time is arbitrarily moved to standard timesheet lines for the same assignment. If the task assignment is subsequently removed, the timesheet line causes the timesheet
to break.
4."Error Communicating with Server". When trying to submit a timesheet, a pop-up box appears indicating that there is an error communicating with the server. This error appears because a timesheet line is no longer associated with a project.
In order to submit the timesheet the orphaned timesheet line must be identified and manually removed. One technique we found which helps to identify an orphaned timesheet line is to select a task and submit task progress. Repeat for all timesheet lines until
you get an error. The timesheet line(s) with the error can be manually removed from the timesheet, fixing the error.
5. Unable to Open Specific Timesheets without Error. There are certain scenarios when the "Remove Task" feature is used or an assignment is otherwise removed after creation of a timesheet with custom billing category lines, which causes orphaned
timesheet lines. These orphaned lines can cause issues when trying to open a timesheet. The issue can appear when timesheets are in progress in multiple periods. In the problematic scenario, time is entered and submitted in one period and subsequently
the task is 'removed' from another period before the PM processes the first approval request. Process governance can certainly help here, but improvement in the way synchronization occurs between project assignments and custom billing category timesheet lines
would be great. The error can often be resolved by re-adding the assignment for the problematic timesheet user to the project (which creates a new assignment), and then allows you to open the timesheet. Then time can be moved from the old timesheet
line to the new timesheet line, and the old one can be removed.
In 4 and 5, sometimes we can't open a timesheet without error, and other times we can open it but not submit it. We are not 100% clear on all the different causes for each. Each of these issues are suspected to be contributing the the misalignment of
data between project actuals and timesheets, which can be a real problem for external projects for which time collected through timesheets are being used to generate invoices.
Although these may seem like separate issues, warranting separate questions, I decided to post them together because they all seem to be related to synchronization of project assignments and timesheet lines for custom billing categories.
Any thoughts or suggestions from the community would be appreciated.
Best regards,
Justin
Justin Naughton

There are many causes for each of the errors mention. It would be best to put one issue to the forum at a time. For example, some of these issues occur then tasks are deleted from projects but a timesheet has been submitted. Depending
on the scenario, some of these issues have been fixed with the latest service pack.
Other issues are due to bad scheduling habits with the project managers and so first determining what they have done can help resolve some the issues.
_error Loading, is because something is NULL in the data and the jave is choking when it build the form. Again, these may be because of delete tasks, resources, projects or someone doing copying and pasting of rows.
cheers!
PS. Train your PM to not COPY and PASTE rows in project schedules. It can be done, but it can create problems. There are over 500 fields and some have unique data and the copy paste creates havic.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

HT201413 i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

That screen is asking you to connect the device to iTunes to restore it.
tt2

Report Server URL field no longer visible in Dashboard Designer after applying SP1 and the October 2011 CU

Environment: 1 WFE on W2K8Ent x64 SP2 | 1 App Server on W2K8 Standard x64 SP2 | 1 Dedicated SQL Server 2008 R2
SharePoint 2010 Enterprise Edition
I recently applied SP1 and the October 2011 CU (Server updates, not foundation) on both the WFE and the App server and now I'm experiencing an issue with PerformancePoint Dashboard Designer in that when I want to deploy a new SSRS report, I no longer have
the ability to indicate the report server url under the report settings section because it's missing. I also do not have the ability to preview the report nor can I modify any of the settings like Zoom or Format as they're greyed out.
I've been researching for several days now and cannot find anything to remedy my issue. I have reviewed the upgrade logs on both the WFE and App server ... I ran the product config wizard after applying the SP and the update ... Sharepoint is configured
to use Windows Integrated Mode for the reporting services configuration via Central Admin.
I noticed that the web config for my app was updated and compared that against a backup of the old web config and I mainly see diffs in version references for reporting services, etc. (Ex. version 10 in the old, 11 in the new/updated config file).
Anyone else out there have this same issue? Any suggestions would be greatly appreciated!
Thanks,
Chad

Ultimately, I ended up installing SharePoint 2010 RTM on a separate system and then copied the folder with the PerformancePoint Dashboard Designer and put that on my PC at work. If you open a PerformancePoint report inside SharePoint, it
will default to the version of the update so be sure to open up the designer from wherever you store it on your PC. You'll know if it's the right one anyways if the URL is missing.
Also, once you've opened the RTM version, this will be the one that opens from the SharePoint shortcut via the Windows Start->All Programs->SharePoint Folder.
Chad Barrett

Exchange 2010 SP1 and SP2 are no longer supported.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

Windows 8.1 64 bit and USB 3.0 connection Error

What a Nightmare to me after I have purchased my Probook 470 G2 with window 8.1 64bit and USB 3.0. after my setup for my new laptop, there are 2 issues i am facing now:
1. my USB 3.0 external drive can work properly with my old window 7 laptop with USB 3.0 input. However, my USB 3.0 exernal drive can not function proplery when i try to plug in to my new laptop with window 8.1 64bit. it show me that it sometimes disconnect, sometimes connect frequently and I can not remove the drive safely
2. Once the laptop set up, there is 3 partition from HP, which is windows (c, recovery (D and HP tools (E. as i want to allocate more space fo save my old photo, HP technician has taught me to compress and release some space(around 150GB) from my C: . I can use the new drive successfully. However it seems i can not have window update manually so I am concerned if this is the mian point to create this issue.
Any HP technicians can help here?
This question was solved.
View Solution.

No. There is no need to go to a command line and there aren't any DOS commands that will help.
You should consider using Windows system restore to return your notebook's operating system to a date before this issue began. Choose a restore point dated before the problem surfaced.Use the search charm and type in restore. Choose create a restore point. The System Properties window will appear. Click on System Restore as seen in the following image.
Make certain the show me more restore points option has a checkmark in the box. Choose the restore point that you want and then click on next. This is safe and reversible.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

Bitlocker without TPM and USB

Hello Team,
I am working for a company which has Windows Server 2012 R2 domain server and mixture of Windows 7 and Windows 8 client computers.
The problem is, I need to configure bit-locker in all client machine, but some machine doesn't have TPM. I found a way to configure bit-locker without TPM, but it requires USB(key within it) at every startup.
So I want to configure Bit-locker in all client machine without TPM and USB, but with PIN. And all bit-locker recovery keys should be backed up to Active directory.
Please let me know the steps to configure this rather than HTTP links.
Thanks in Advance.
Have a great day ahead and make a great day for me.

Hi.
Having a PIN is only possible in combination with a TPM, but having a password alone is possible since windows 8.

Macs and USB Devices Not Getting Along

I am posting this incase I'm not the only one.
I have noticed this issue with my Intel iMac as well as my PPC iMac
Both are running the latest versions of OSX 10.4.9
This is regarding USB connectivity and the effect connected devices have on the system.
USB Setup
1 7 Port usb hub
1 Palm Dock Connected via hub
1 iPod Dock Connected to 2nd USB Port on iMac
1 ScanSnap connected via hub - POWER OFF
Bluetooth Apple Mouse & Keyboard
1 TomTom 910 connected via hub - Connected to dock but power is off.
1 Canon IP90 Connects via Bluetooth - POWER OFF
This is what happens.
If one of the following usb devices is connected, boot times can be extended with the system "pausing" at the Gray screen before Gray Apple Logo appears.
iPod
Palm TX
Once the OS boots Missing Sync's Menu Bar status application will not load, will have to manual load app.
If I disconnect these devices and reboot boot time is normal with no "pause" and missing sync loads normally.
Also i Have noticed my Apple keyboard will take longer to pair during boot with or without these devices connected.
iMac will not power down as scheduled with these usb devices connected if the system falls asleep with them connected.
Normally the iMac will wake itself up at 11pm to shut down. If my iPod or Palm is connected it will not. It will only shut down via schedule if it is awake when scheduled time is reached.
iMac G5 2 Ghz 1.5 Ram 400 Gig HD & iBook G4 1.33 12 Mac OS X (10.4.6)

So just an updated to my original post. I have been working with tech support for Missing Sync. There is a known issue with a menu bar application that comes with their software. It seems when more than 1 or 2 usb devices are connected this menu bar app doesn't load correctly... or at all.
According to them.. one of their techs actually spoke with a Apple Engineer at WWDC this week regarding the issue. According to this Apple Engineer there is a known issue with OS X and USB handling. Apparently the OS can "freak out" if certain devices are connected during boot.
No other specifics where given, and who knows if this is Missing Syncs attempt at shelling off responsibility to Apple. However, I am inclined to believe it as I have noticed that my iMac Intel or PowerPC will take a significantly longer time booting if my iPod or Palm Pilot is docked during boot. I've also noticed I can't reset my PRAM when these devices are connected.
I hope apply addresses these issues, seems kinda crazy its gotten this far being that USB devices are the primary method for expanding your Mac's abilities.
iMac G5 2 Ghz 1.5 Ram 400 Gig HD & iBook G4 1.33 12 Mac OS X (10.4.6)

K7N2G SP1 and USB !!

Similar Messages

Maybe you are looking for