K7N420pro - cannot use latest detonators
Let`s start with the system specs:
K7N420pro
BIOS v1.05, High Performance Settings
Athlon XP1800+
Leadtek Winfast GeForce3 Ti200
SB Audigy Player
256MB Infineon 2-2-2, 256MB Apacer 2-2-2
AVM Fritz! ISDN Card
Some unimportant other stuff
Win98SE (Yeah, baby )
DX8.1b
Forgot anything important?
After installing the 1.13 chipset drivers, Win98 didn`t boot anymore. I went into safemode & device manager, kicked most devices, let Win boot & installed the 1.05 drivers again. System worked again, but now had serios trouble with DX8 games/applications (Morrowind didn`t play videos & didn`t show pixel-shaded water anymore, ut2k3-demo started with a black screen in D3D mode, 3dMark2001 gave me seconds per frame and major graphic errors). No problems with DX7 and OpenGL based games (UT, Q3A).
I decided to reinstall Win98 (format c: ). Installed everything from crap (chipset drivers 1.05, Detonators 29.42, latest SB drivers, DX8.1b). Installed IE6, ran the Online Update. Finally, started the UT2k3-Demo. Black Screen. Started 3Dmark. Secondes per frame, graphic errors. ?!?
Reinstalled chipset drivers, detonators, DX. Nothing helped. Tried some different Detonator Drivers (31.00, 28.32). Same problems. Finally, tried Detos 21.81. Everything works fine now.
&%$§"?!?
My system ran quite well with the 28.32 and 29.42 Detonators for several months. Why the heck it doesn`t anymore? Ok, it DOES run now, but actual drivers give me more performance. Do I have to install everything in a certain order? Did I forget anything? Every help is appreciated.
And: Please no "Switch to WinXP" comments. I like my Win98, and if you stop using IE to browse the web, your clock won`t speed up all the time.
Erm...ok, you got me, I`m a liar. I checked it, it`s not even 2.5, it`s 2.6.
@all: Thanks for answers. Going to continue poking around with my system tomorrow, it`s 2.40 a.m. now here (live in Germany).
IRQs:
0 System Clock
1 Standard (101/102 Keys) or Microsoft Natural Keyboard
2 Programmable Interrupt Controller
3 IRQ-Holder for PCI Control
3 PCI OHCI Compliant IEEE 1394 Host Controller
4 IRQ-Holder for PCI Control
4 Standard OpenHCI USB Host Controller
5 IRQ-Holder for PCI Control
5 Creative SB Audigy
5 NVIDIA nForce PCI System Management
6 Standard Disk Drive Controller
7 ECP Printer COnnection (LPT1)
8 CMOS / Real TIme Clock
9 (free)
10 IRQ-Holder for PCI Control
10 AVM ISDN-Controller FRITZ!Card PCI
11 IRQ-Holder for PCI Control
11 NVIDIA nForce MCP Networking Adapter
11 Standard OpenHCI USB Host Controller
12 IRQ-Holder for PCI Control
12 NVIDIA GeForce3 Ti 200
13 Numeric Coprocessor
14 First IDE Controller (Single FIFO)
14 Standard-Dual PCI IDE Controller
15 Second IDE Controller (Single FIFO)
15 Standard-Dual PCI IDE Controller
Audigy already in Slot 4 @ IRQ 5.
gn8...
Similar Messages
-
after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me
There is no such thing as a "Factory Unlocked iPhone "
They are either locked to a carrier who may at some stage offer unlocking
or sold direct to a user by Apple (from their own Stores or online .)
Those iPhones are NOT locked
Where did you get your iPhone
If from Apple try this
http://support.apple.com/kb/HT1808 -
The latest update has caused a runtime error and cannot use i tunes
i have just tried to put the latest update on my laptop and it has caused a runtime error and now cannot install i tunes at all.
have you use latest version of nvidia driver, you have a compatibility issue here.
-
I have had my Ipad for about a year and regualrly transfer pictures from my pc to Ipad using ITunes. for some reason when i have tried to do this again the computer comes up with message that I cannot use my IPad as it needs 11.1 version. I have downloaded latest version of Itunes. Pease help as I am pretty hopeless with IT. Thanks
It sounds like you still have to update it.
It's very easy to do. If you have OSX iTunes, go to iTunes>Check for Updates. If you have Windows, go to Help>Check for Updates -
My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings. Please help. I cannot use iphone.
I would "guess", since you were in the middle of backing up, your backup is corrupt & most likely unusable. Only one way to find out though, & that's by trying to restore from that backup. If your pics are not there, they are gone.
-
I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?
Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Why I cannot use search function in my apple store? I use Ipad 3 and it is the latest software
Why I cannot use search function in the apple store on my ipad?
Nobody here could possibly answer your question as presented. Have you tried any troubleshooting steps at all?
Quit the app store completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work ... A few more details from you might help you get your problem resolved. -
I just did the update to iOS 7.1 and now cannot use my Facebook app on my ipad. It won't open, it just crashes. I can access it via the internet and can still use the app on my iPhone (which also has the update) but not on my ipad. Anyone else have this problem or have any suggestions?
Hi Mommoch!
Use the information in the following article to help you troubleshoot this issue with your purchased app:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
If you do have any suggestions, where can I find it? The only place I know of is the http://www.mozilla.com/en-US/firefox/all-older.html web site and you can only get version 3.6.16 there and it's NOT optimized for Yahoo!. Please help!
Yahoo! keeps sending me the following message in a box on my screen along with the links to Firefox 4 and IE : Attention: Please upgrade to the latest Yahoo! optimized browser to ensure the best Yahoo! experience. But, as I stated in the question above, I cannot use Firefox 4 yet because it does NOT support Norton 360. Plus, I don't trust IE8 to use Facebook!
Thanks for any help you can give me! Your very prompt attention to this question is greatly appreciated as I am sort of at a standstill before moving on with my work.
Regards,
Christine
(Running Windows Vista Service Pack 2)Symantec have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
-
"You cannot use this version of the application Mail with this version...
I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
Any help is appreciated.ANSWERING MY OWN POST:
I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0. -
Cannot use HP scan with 7520 on OSX Mavericks
I have added a new computer to the household---a 2014 macbook air. I currently use my 7520 to print and scan without any problems on our other home computer (2011 macbook pro). I just installed the latest drivers and software (for Mavericks 10.9) and software, and I can print just fine using any print dialog. I can also scan documents if I use Apple's built-in scanning software from the system preferences menu.
BUT: I cannot use HP scan at all! Every time I attempt to scan a document, it tells me a dialog that says:
"HP Photosmart 7520 series-AirPrint is currently unavailable. Please check if it is turned on and connected, or try again later."
I don't get it---I can connect and scan just fine using NON-HP scan software, and this is the latest software/driver kit. I really like HP scan for its wireless and editing abilities, and am very frustrated! How can I fix this?
Thanks!SunShyne
I think that did it! I missed a step in your previous explanation. Will see if it holds. I'll report back here if it loses it again, bot all good for now.
Thanks -
I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.
iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
Good luck, hope this helps.
Lil -
I too cannot download latest itunes version. Apple needs to respond and fix what is certainly a software defect. Am seeing all of the same error messages including MSCVR80.dll is missing from computer. For Windows 7 a "Error 7 (Windows errror 126) appears. How do you get Apples's attention. It is impossible to link up with real support from their website?
Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)
-
I cannot use data and voice at the same time.
I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
SandeepI am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too
Maybe you are looking for
-
Please read the following diagnostics of hardware monitor for my system Macbook Pro
Following report was generated through "HARDWARE MONITOR" software run on my Macbook Pro: CPU A temperature diode 43 degree CPU core 1 45 degree CPU core 2 -44 degress enclosure bottom side -33 degre enclosure bottom side 2 -32 degre enclosure bott
-
Passing dynamic content to a Document viewer in a Content Presenter Templat
Hi, This problem is probably for Yannick. Our customer has a bunch of documents in UCM. They want to be able to put links to these documents in their Navigation Model (Webcenter Spaces App) which bring up the document as content inside a page, i.e. i
-
My macbook crashed and I see a folder with a question mark blinking-
I was getting a file from my friend on AIM and my mac froze. So I tried to restart it but all I see is a white screen with a question mark in the folder blinking, instead of an apple sign. Does this mean that my harddrive crashed and I need a new har
-
JavaFX KeyEvent: a bug or a feature?
Hello Everyone, please take a look at the following toString()-Representation of KeyEvents. I was expecting '$' as text value, because Shift was pressed. Unfortunately, KeyTyped is not fired in this case, so I am not able to get the information from
-
I can't find a feature I saw once for e-mail notifications
Hello, I would like to know how to receive files uploaded to my response form sent as an attachment(s) included with my e-mail notification and summary. Is this possible? I thought I saw this feature once but now I cannot find it.