K8N Diamond - sound from PCTV media center 300i

I have the following mainboard: K8N Diamond (NVIDIA, nFORCE, 4 SLI Chipset Based) - which I am very happy with.
I am watching TV on my PC using: PCTV Media Center 300i.
I have not yet found a way to hear the sound from the TV. There is an internal audio cable (4-pin) from the PCTV card which should be connected to the sound card. But I do not where to connect on the mainboard.
Can anyone help ?

I'm not sure as I don't have anything plugged in on JCD1, everything is working for me without this cable. Of course at the moment, I don't have a TV card either.
I'll see what I can find out, you may want to send an email to the MSI technical support. This is just a public forum and I don't think they monitor it.

Similar Messages

Recorded TV - from Windows Media Center to iTunes

Is it possible to import recorded TV from Win Media Center to iTunes?

Sure, if you convert it to a iTunes compatible MP4 file. There are lots of Third Party iPod Video converters. Do a search for Videora, it's free and easy to convert from DVR-MS to MP4

DVD to i-Pod from Gateway Media Center

Is there a way to download a movie DVD from Gateway Media Center to i-Pod???

You don't.
you have to put the music in itunes and sync it from there.

Touchsmart Iq506t Windows 7, Unable to acess s-video input from windows media center.

System: Hp Touchsmart IQ506T
Windows 7
Avermedia (A327) Hybrid mini Pcie Tv Tuner (NTSC/ATSC)
I purchase this system used without an operating system. I installed windows 7 and downloaded the drivers from Hp. All drivers are installed properly and the Avermedia (A327) mini card driver can be seen in device manager.
Yet, the A327 tv tuner will not give me access to the s-video input. I can get tv thru the rf connection but I want to use the s-video because it has a cleaner signal.
Any information about the s-video port will be appreciated..
Thank you..

Hi Cnmarsh,
I understand you are having an issue with the Touchsmart Iq506t with Windows 7, unable to access s-video input from Windows Media Center.
I read from your post that drivers are installed properly and the Aver media mini card drivers are seen in device manager.
I was wondering if the any of the drivers in Device Manager have a Yellow caution?
Also, is the Touchsmart Iq506t software all up to date?
You could try to download and run HP PC Hardware Diagnostics tool with this link.
http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
Looking forward to hearing from you.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to download music from windows media center on home computer to i pod touch

how to download music from windows media center on home computer to i pod touch

You don't.
you have to put the music in itunes and sync it from there.

Cant hear sound from the long center speaker under the screen on pavilion dv6

can't heaar sound from the long center speaker under the screen on pavilion dv6

carlosherrera_1 wrote:
Look at p.12, items #2. I am talking about those speakers.
Hi,
Sorry I misunderstood, central (center) speaker is the one sit at the middle, we normally call Left, Right and Center speakers. Anyway, what is your speaker icon (bottom right corner) says ? Does it look like this ?
1. If NO, double click it & turn it ON
2. If YES, right click it, select "Playback devices" and turn it ON, it should look like this:
3. Otherwise, please post back
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

X-Fi Fatal1ty No sound from rear or center in speaker tests?

I just installed the X Fi Fatalty Xtreme Gamer and cannot get sound from the rear, center or subwoofer in the speaker tests. All the speakers (Logitech G-5 Gamer)?work playing MP3's but that's it. Installed latest drivers uninstalled an reinstalled card etc?Can anyone help with this before I box everything up and ship it back to newegg? Running Vista 64Message Edited by ovrclkd on 0-23-200807:6 PM

After carefully checking this again, it turns out clicking front left or right the sound comes out BOTH the front and rear. To make things more confusing when all but the line (green) 3.5 jack was unplugged ALL the speakers would work. LONG STORY SHORT I SENT THIS P.O.S. BACK TO NEWEGG FOR REFUND. Every thing works great with the onboard audio, I'm in the market for a 7. that works.Maybe Auzentech? Any suggestions?!! With all the issues the peeps are having someone must be using a card that works out of the box in Vista 64

Is there or can Microsoft develop a app for smart TVs so you can stream from Windows Media Center

I have used Windows Media Center for years to record TV programs and have even sertup my kids Xbox 360 as an extender. I've recently purchased a smart TV which allows me to steam music and home videoes from Windows media player but ofcourse the .wtv
files will not play. Would it be possible to develop an app for Smart TVs and other devices so they can be used as extenders. I'm sure many people would be willing to pay for the app. I've tried some 3rd party extenders and not been
happy with there performance and I'd like to not need another box and remote. I'm sure these new TVs have the ability to do it will microsoft allow them too?

Hi,
I agree with S.Sengupta.
You may contact the support of the smart TVs and request a tool to match Windows media player.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Problem streaming from Windows Media Center to XBOX 360 with Airports?

Good evening,
I have been having an issue trying to stream windows media center from my windows 7 ultimate (64 bit if that helps) to my Xbox 360. My network setup is:
I have an airport extreme (G) that is plugged into my cable modem and my windows 7 machine. In my living room I have an airport express that extends my wireless signal through out the house but my xbox 360 is plugged into it via ethernet. I have a very fast internet connection that is stable but any transfer between my computer and xbox is very limited it seems. I was wonder if there is a way to get this to work better. When I lunch windows media center on the xbox it sees my pc and it shows the available files but when I try and move from one to the other nothing happens and eventually I get a can't connect error. Would I be better off not connecting via ethernet to the airport express and just buying a wireless adapter?
Thanks

You don't say how your devices are connected, whether through your Verizon router or some other way. If through, say, an Actiontec then you may be having bottleneck issues. I used to run all my devices through my Actiontec and got poor transfer speeds (it only handles 10/100). Moving everything on my network to a 10/100/1000 switch helped my transfer speeds to shoot right up ten fold. This way only the switch gets connected to my Actiontec and my network devices can still get out on the 'net if needed.
It's ok to try to reinvent the wheel, but just make sure it's round.

Zen X-Fi Streaming Music from a media center Help Please

Hi,
I just opened brand new Zen X-Fi 6GB checked out it's playback installed Creative Centrale and was ready to test media streaming. Here it is where my frustration started and I hope somebody can help me.
The system:
Windows XP Pro SP3
Antivirus Kaspersky Internet Security 2009 (tried switching off during tests as well);
Windows Firewall switched off;
PC Connected through cable to wireless router Linksys WRT54GX-v2
MAC filtering is off in router
X-Fi obviously connected via wireless. Sofware version on X-Fi: .03.0 ( I know there is newer version, haven't tried that one yet)
Media Server is enabled in Creative Centrale, name to server is given. Instructions on http://support.creative.com/kb/ShowA...aspx sid=52949 have been read, everything seems to be set according to description.
Zen X-Fi finds my Wireless network and connected after I initially entered wireless password. When searching for Media Server, only Creative MediaBox comes up. This proves that Zen X-Fi is able to connect to router and that it talks to media server on internet. However, it does not see my Media Center provided by Centrale. I have also J.Ri'ver Media Center running on another PC at home that also has UPnP server running ( which I tried to switch off and on during tests). Not sure if this inmpact Centrale MEdia Server in any way. I have also found UPnP Enable/Disable option in my router setup, again traid enabling and disabling it, not sure what should be the set up.
I have probably tried to start server 25 times. There were four possible outcomes:
. Finds only Creative Media Box. Happened mostly
2. Gets stuck while searching, nothing happens. Basically have to soft reset to start it again. On/Off does not work. This happened probably 2 times during my test.
3. Once I go back from list of media servers (with only Creti've MediaBox in a list) , and try to hit Media Server again, player freezes. I get almost black screen with little backlight, which can only be seen in dark environment. Again, no other option than to soft reset. This happened 5 times
4 It found Media Server from Centrale as well as my Media Center from J.Ri'ver MEdia Center. This happened once... during my tests. Almost felt like I won lottery... Kaspesky was on during this test, by the way. Connected to Centrale and heard music, it was fine. Could not connect to J.Ri'ver media center, but that is another topic probably.
To summarize. This is not acceptable if I have to try 25 times, with 7 soft resets and hope for one succesfull connection. Certainly there is something wrong and I can't figure it out. Can you please help me

Same problem on my laptop at work, at home it just hangs looking for media server. The media server name shows up in my network devices. I turned off my firewall, etc.
I can't believe there's no response yet, I just emailed customer support.

No sound from rear or center of Inspire 5300 speakers

I have an Audigy 2 Platinum card and an Inspire 5300 speaker system. All was well until a few days when sound only came from the two front speakers. The creative speaker settings tool no longer shows any speaker settings to choose from. Windows allows me to choose 5.1 setting, but of course it doesn't work. I re-installed the latest drivers and media go! software but problem persisits. I ran the diagnostic tool and I received the following error: "NTWriteWordConfig-CONFIG_READWORD". Could this be the cause of my problem, and if so, how can I fix it's Any help would be greatly appreciated.
Thanks

i have a similar problem
in my case the problem is with the front c/sub,i have no output on the sub.
it would be surely great if someone could throw a look at this and help out...

No sound from Rear Speakers - Center Channel Works F

I have a Windows Vista (brand new) system, with an X-Fi XtremeMusic card on board. Connected via the digital i/o dongle is an Onkyo TX SR-605 receiver, which in turn is hooked up to a 5. Polk Audio speaker setup. The 5. setup works fine?for all other components on the receiver. That said, it doesn't seem that there's much or any sound coming from the rear speakers when it's playing the computer setup. When I use the THX speaker setup utility it correctly identifies the right, left, center, and sub, but then announces that the front right and left speakers are the rear right and left speakers. Any idea how to fix this?

All the sudden I got the similar problem with Logitech Z-5500 with optical out...test with THX Consol and no sound coming out of rear Speakers instead front R and L.......update to latest driver but problem remains....

MOVED: K8N No Sound From Left Channel

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=115851.0

Can someone with more knowledge tell me if these two tables are telling me that my Antec P180 case front audio panel connector is working to a different standard to the K8N mobo? I have it connected with the Intel AC'97 connector. Thanks!
At this point I would add the image if I could work out how to do it! So here is the text version;
From K8N Manual
PIN SIGNAL DESCRIPTION
1 AUD_MIC Front panel microphone input signal
2 AUD_GND Ground used by analog audio circuits
3 AUD_MIC_BIAS Microphone power
4 AUD_VCC Filtered +5V used by analog audio circuits
5 AUD_FPOUT_R Right channel audio signal to front panel
6 AUD_RET_R Right channel audio signal return from front panel
7 HP_ON Reserved for future use to control headphone amplifier
8 KEY No pin
9 AUD_FPOUT_L Left channel audio signal to front panel
10 AUD_RET_L Left channel audio signal return from front panel
From Antec P180 Manual
Pin Pin Assignment
(AC’97 AUDIO)
1 MIC In
2 GND
3 MIC Power
4 NC
5 Line Out (R)
6 Line Out (R)
7 NC
8 Key (no pin)
9 Line Out (L)
10 Line Out (L)
Pin Pin Assignment
(HD AUDIO)
1 MIC2 L
2 AGND
3 MIC2 R
4 AVCC
5 FRO-R
6 MIC2_JD
7 F_IO_SEN
8 Key (no pin)
9 FRO-L
10 LINE2_JD

No sound from embeded media in IE/Firef

My soundcard seems to be working fine as far as opening music files or videos etc. The only time I have a problem is when hearing embedded sound in either Internet Explorer or Firefox; Say for example I go to look at a video on video.google.com there's no sound, or if I go to a webpage with sound playing in the background it can't be heard.
I didn't have the problem with my previous card (SBLi've), and has only happened since I installed my new X-Fi. Since it happens with both IE and Firefox, I would imagine it's more than just a browser problem. Is there anything anyone can recommend to help solve this problem?
BTW, I just finished reinstalling and that didn't seem to do the trick.
Any help would be great appreciated.

FThanks for the quick reply! I have the X-Fi XtremeGamer, I unplugged the rear speakers and plugged headphones into that jack (I'm assuming that the rear speaker output is also know as line out 2), I had CMSS enabled and when I played a music file, I did hear it through the headphones.

No sound from center speaker during calibration, games, DVD movies (have already read the stic

For those that point at the sticky topic, let me just say that I've already read it, implemented the suggestions there, and it has provided no result.
My setup is an Audigy 2 ZS card mated with Altec Lansing VS35 5. speakers. I've connected the cables correctly, enabled CMSS, updated my drivers to the latest version, but during Speaker Calibration, playing games, watching DVD movies, there is no output from the center speaker. If I watch encoded movies (avi files), I can hear sound from the center speaker. So what seems to be the problem? Anyone got any suggestions?Message Edited by mofo on 03-9-2005 08:0 AM

I have the same problem, games and music etc all speakers work, but during the tests/calibration I get no sound from rear speakers, center or the sub...... help please! (from the firewire port out the plugs all go as follows: yellow, black, green)

K8N Diamond - sound from PCTV media center 300i

Similar Messages

Maybe you are looking for