Ke24 not displaying any result in COPA
Hi Experts,
i have accounting based COPA active in my system. I have run KEU5 and accordingly the documents get generated showing recievers as COPA dimensions which i have maintained in cycle. SO cycle run properly
Now when i check table CE1XXXX xxx controlling area) or i execute KE24 i could not find any value. it not showing any result. Please let me know how the values can be seen in CE1XXXX table or in Ke24 report
Note: CE4XXXX table shows correctly all values, CE3XXXX dont have any values
Regards
Pragya
Pragya,
See if this note is implemented in your system if not try implementing 1487641
Similar Messages
-
This Formula(Function) compiles but does not display any result
Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
v_all_positive NUMBER;
v_all_negative NUMBER;
begin
IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
:cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
ELSE
:cp_stock_bal := :cp_stock_bal + :quantity;
END IF;
ELSIF :transaction_type IN ('ISSUE') THEN
IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
:cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
ELSE
:cp_stock_bal := :cp_stock_bal - :quantity;
END IF;
END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PMPlease can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
v_all_positive NUMBER;
v_all_negative NUMBER;
begin
IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
:cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
ELSE
:cp_stock_bal := :cp_stock_bal + :quantity;
END IF;
ELSIF :transaction_type IN ('ISSUE') THEN
IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
:cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
ELSE
:cp_stock_bal := :cp_stock_bal - :quantity;
END IF;
END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM -
Aperture 3 project does not display any images in one Project
This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key. -
2.1 EA2 does not display query results, query works fine in sqlplus
2.1 EA2/Windows XP 32-bit
The following query does not show any results for Total(GB) and Free(GB) columns. The diskgroup name shows correctly.
SELECT
DG.name ,
ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
FROM
V$ASM_DISK DSK,
V$ASM_DISKGROUP DG
WHERE
DSK.GROUP_NUMBER=DG.GROUP_NUMBER
group by DG.name;
The query works fine when run from SQL*Plus:
SQL> SELECT
2 DG.name ,
3 ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
4 round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
5 FROM
6 V$ASM_DISK DSK,
7 V$ASM_DISKGROUP DG
8 WHERE
9 DSK.GROUP_NUMBER=DG.GROUP_NUMBER
10 GROUP BY DG.name;
NAME Total (GB) Free (GB)
DG1 707.98 162.32
DG2 134.84 122.68
SQL>
This must be something unique to SQLDeveloper. I tested in 2.1 EA1 and 1.5.5.59.69 and the query does not show results for the Total (GB) and Free (GB) columns.I would like to update the problem. It seems like when SQLDeveloper is connected to ASM instance, it has trouble using the divide operator (/). For example, the following query works fine:
SELECT
name,
TOTAL_MB
FROM
V$ASM_DISKGROUP;
But if I try to divide the TOTAL_MB by any number, the column shows blank (the column is blank, not NULL). So, if I try to run the following query, the output will just display diskgroup names. The TOTAL_MB/1024 column shows blank.
SELECT
name,
TOTAL_MB/1024
FROM
V$ASM_DISKGROUP;
If I run the same query in SQL*Plus from the same desktop using the same TNS alias, it works just fine which tells me that it is a SQLDeveloper problem.
When I am connected to a regular database, then the problem does not show up and SQLDeveloper is able to display the results even when I am using the divide operator (/). -
QUnit not showing any results - VisualStudio 2013
In Mircrosofs book:
"Programming in HTML5 with JavaScript and CSS3" there is testing with QUnit.
Have done exactly as the book describes with in an example with an webcalculator in excersise 3.
But when I run the debugging with QUnit does not show any results.
It does not matter if I program an
error..nothing is displayed when I´m start debugging.
Only a blue line with the following:
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.95 Safari/537.36
My question:
How do I make QUnit to show something?
I really appreciate your answer
:0)Hello,
Please post your question in ASP.NET forums here:
http://forums.asp.net/
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
IWeb Error: "Your search did not produce any results."
I just updated my iWeb and added the new search and comment features to my iWeb site. I am happy to see these features added but the search feature gives me a page displaying "Your search did not produce any results." Does anyone else have this issue? I am using my .Mac account and did a "Publish all to .Mac" to see if that would help. Comments work great. Can anyone help? Not good to have a feature that does not work.
Cheers!
PatrickI am having the same problem and can probably give you an answer as to why the search feature is not working...
Look carefully and you may notice that by re-publishing your site with 1.1, iWeb has converted all text on your site to image files (probably .png). This is what happened when I re-published.
Therefore, there is technically no text to "search" through...
No fix as of yet... I will ttry to republish yet again tonight -
TS3297 ITunes for IOS does not display any content in the iTunes store
iTunes for IOS does not display any content in any section (other than Genius tab).
NB: I am signed in with my Apple ID & have an Internet connection.
On selecting say the "Music" tab the display briefly say's "Loading ...", but nothing displays, just a white screen.
I have tried signing out of iTunes & re-setting the iPad, but this does not fix the problem.
(The App Store is working fine!)Status is :540672
<REQUESTRESULT>
<RESULT>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</RESULT>
<FAILURE>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</FAILURE>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMVALUE</STATUS>
<VTEXT>VALUE?TE:20060830
END:VEVENT
END:VCALENDAR
</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
</REQUESTRESULT> -
Product Revenue Bookings and Backlog Dashboard does not display any data
Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S -
Ipjone6, silver, 64GB
I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?how to reset password:
https://iforgot.apple.com/password/verify/appleid -
I installed adobe reader but it will not display any pdf
I installed adobe reader but it will not display any pdf
What version of Reader in what OS? Does the program open? What happens when you use File->Open to open a pdf file on your computer? Any error messages?
-
Altavista will not display search results
altavista us will not display search results. altavista canada works fine. On us site results will display in no style page but not in basic page style. The page comes up blank. This may have been caused by delta search. I think I have rid my computer of delta? Reloaded firefox. I use norton 360 and have run registry clean up and virus scans. Also cleaned explorer. In explorer the u.s. altavista works ok that is why I think it something to do with firefox and delta search showed up at the same time unwanted and forced a change on my home page. Have cleared computer of what delta files I could find my have something in the registry but I would not know what to look for or to do with. I am running xp
In a round about way you solved my problem cor-el ! At the end of standard diagnostic there was mention of malware so I ran malwarebytes before running profile manager. malwarebytes found 21 items some in the registry. deleted these items and tried altavista us again and to my surprise it is working ok now.I thought norton 360 would catch such things but I guess it doesn't ! will keep and run a malware program from now on. thank you for your help.
-
MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer
MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists. The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.Well, you actually won't be able to see the C-series modules for a cRIO in MAX. Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface? If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer -
Question
When I try to bookmark a page, the choose option dies not display any of the folders in my bookmark menu
I have a new computer and download of Mozilla Firefox, but imported bookmarks from older computer. Could that be the problem?I'm not familiar with Windows 7, but... is it possible there is a permissions problem with your profile folder, or read-only set on any database files?
-
BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.
These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.
-
Bing based federated result sources not returning any results for non-English languages
I have a result source with this query:
http://www.bing.com/search?q={?searchterms} language:fr site:msdn.microsoft.com&format=rss&count=50&first={startIndex}
This used to give me 40-50 results for common terms like download, blog etc.
From today (7/14) IST, this source does not return any results. There are no results if I execute this query directly in IE either.
Same behavior observed for: language:es, language:de etc.
I do however get results as expected for language:en.
Any idea what the issue might be?Hi Swapnil,
According to your description, my understanding is that no results returned when searching with non-English in the Result Source query.
I tested the same scenario per your post and I got the same results as you got.
I recommend to change the language:fr in the Result Source query to be lang=fr to see if the issue still occurs.
More references:
http://kbdump.com/sharepoint-2013-opensearch-search-twitter-facebook-wikipedia-page/
http://richardstk.com/2013/11/08/sharepoint-2013-federated-search-to-bing/
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
Need help to copy a photo between two events.
I would appreciate it if someone could tell me how to copy a photo I want shown in two events. I have tried to duplicate the photo and drag it as well as cut and paste the duplicate, and in both instances, both photos move. Does iPhoto not allow the
-
Dialogue failure from ICM Router send 404
Hi, It is a fresh installation of ucce 9.0(3) with CVP 9.0 I am using sip comprehensive model (without SIP proxy). After I have finished the installation, all the pims are active and the same for the call server and vxml server. For some reason, the
-
Need laser suggestions for my Mac
I'm looking for suggestions on network laser printers (preferably color) for our Macs. I mange a network with mostly PCs and some Macs. We have a number of Lexmark and HP printers on the network. The HP printers tend to be fussy with our Mac users, w
-
Place SR and Opportunity records in one report
Hi Exerpts, Are we able to place SR and Opportunity information on the same report? Thanks, Sabrina
-
[SOLVED] systemd: autostart service last, at login screen
hi I don't use X, so no .xinitrc, but I'd like to run a script after boot when it reaches the terminal login. In particular, the script is a simple beep command to play a sound. I tried this [Unit] Description=welcome After=multi-user.target [Service