Keeping count of how many times a case structure has been entered.
I have a "Case" structure (when a button is pressed, it is "case True").
I want to keep track of how many times this "case True" has been entered.
How can I do this?
Solved!
Go to Solution.
For that you need to have a shift register or a feedback node and keep counting whenever the case structure case is executed the count will be increased by one see the attached snippet.
Good Luck
The best solution is the one you find it by yourself
Attachments:
CaseStructure count.png 10 KB
Similar Messages
-
Am I able to find out how many times my ICloud account has been accessed?
Am I able to find out how many times my ICloud account has been accessed?
I'm afraid iCloud doesn't provide access logs.
-
How to find how many times a t code has been processed by a user
How to find how many times a t code has been processed by a user I am not able to get the exact number from the ST03 or STAD/STAT transaction. I am requiring the specific number that this T code has been processed completely this many no of times for a specific period.
You must be more precise with your question.
How long is the time period which you want to check, few hours or several days or longer? And how many executions do you expect, 100, 10000 or millions?
The STAD should help you, for the smaller numbers. There is no solution for the larger ones. Don't mix STAD and ST03, ST03 is aggregated STAD information
and know only how often a transaction was executed in total.
ST05 is no solution for your problem to much overhead, and yoou should trace only a short period.
There is no tool to check usage of transactions in more detail because of privacy reasons.
Siegfried -
Can I see how many times a shared album has been viewed?
I primarily use Revel to share photos of events since the files get too big to email more than 2 at a time. Usually, there is a very limited group of people that would be interested but the link to one album was shared on Facebook and I'm curious to see if many people viewed that album. Is there a way to see how many times the album has been viewed?
Use your account credentials to log on to iTunes Connect. Or use those same credentials with one of the 3rd party app reports management tools such as AppViz, AppAnnie, etc.
iTunes Connect
https://itunesconnect.apple.com/ -
HT5071 How can I see how many times my free book has been downloaded?
I would like to know how many people have downloaded my free ibook, but I can't find that information. I am a complete novice at this, so please give detailed answers. For example, I do not know how to log into my ibooks account. Thanks.
Use your account credentials to log on to iTunes Connect. Or use those same credentials with one of the 3rd party app reports management tools such as AppViz, AppAnnie, etc.
iTunes Connect
https://itunesconnect.apple.com/ -
Any way of knowing how many times a purchased playlist has been burnt?
Is there any way of telling how many playlist burns you have left of the 7 allowed for purchased songs (playlists)?
-Frankiehi,
use STAD transaction. -
How do I keep track of how many times a method is called inside anthr clas?
I am writing code for a program that solves a Knight's Tour. A Knight's Tour is a path a Knight Chess piece can take around the board starting at any spot, touching every square once, and only once. I have to write 2 classes and one is provided. The provided class is encrypted and written by our professor. All I know that it does is simulates the game using the two classes I write and provides a print out and prompts to ask the user which square they want to move to next.
The square class I have to write consists of a constructor that makes a square object that keeps track of its color (white/black) and its status (whether it has been visited, is occupied by the knight, or is free and has not be visited).
The GameBoard class I have to write is what I am having problems with. I am writing a method that determines how many squares have been visited. The previous mentioned class that my professor wrote for me contains a method moveKnight();. The way the program works is that every time moveKnight() is called a square's status is changed to occupied and therefore visited later. moveKnight() will only work if the move requested by the user is a valid move.
SO! My main problem (sorry for all the explaining, just trying to give you all the information) is that I don't know how to keep track of how many times moveKnight() is called by the program. If i can figure this out it should be simple. I'm new to java but i believe...
if(moveKnight() is called)
{count++;} //count is a member variable already initialized
return count;
the moveKnight() is called section within the if() statement is what I am unclear how to do. Please help.
Thanks, Veritasin your case you want 'count' to be a class attribute rather than a local variable. But yes, incrementing it each time that the method is called will serve your purpose.
-
How to keep track of how many times a link has been clicked?
How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?
Hi
Proably something like this can work,
1> Have a servlet/bean invoked when the link is linked
2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
The best thing is to store the count in the database.
Regards
Arathi. -
Count how many times a Orchestrator runbook has run in last 30 days
Hi
Please could someone help me with a sql query that could help me do a count on how many times a runbook has run or been executed in the last 30 days ?
ThanksHi,
here is your SQL Query
select Name, count(policies.UniqueID) as Count from Policies
inner join POLICYINSTANCES on policies.UniqueID=POLICYINSTANCES.PolicyID
where POLICYINSTANCES.TimeEnded > DATEADD(mm,-1,GETDATE())
group by name order by Count
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat -
Help appending how many times an event ID has occurred next to the unique Event ID.
Hello,
I am trying to figure out how to find how many times an event occurred and then append that next to the single -unique Event ID.
The closest I can find is the Sort-Object Count but I can't figure out how to get that work within the below script.
Any help would be appreciated, the below script works already. but just doesn't have that Event ID count.
Thank you for any help.
Below is the
script to pull all Event Logs for each server, filter them to only display Warnings, Failures, and FailureAudits for Application, System, and Security logs and then remove all duplicate EventIDs so only 1 of each is shown. it then exports that info into a
.CSV per server.
param([string]$days= "31" )
$servers = @("Server1", "Server2" "Server3", "Etc")
$user = Get-Credential
#Set namespace and calculate the date to start from
$namespace = "root\CIMV2"
$BeginDate=[System.Management.ManagementDateTimeConverter]::ToDMTFDateTime((get-date).AddDays(-$days))
$store = "C:\Powershell\MonthlyMaintenance"
foreach ($computer in $servers)
$filter="TimeWritten >= '$BeginDate' AND (type='Warning' OR type='Error' OR type='FailureAudit')"
Echo "Pulling Event Logs for $computer ..."
Get-WmiObject Win32_NTLogEvent -computername $computer -Filter $filter |
sort eventcode -unique |
select Computername,
Logfile,
Type,
@{N='TimeWritten';E={$_.ConvertToDateTime($_.TimeWritten)}},
SourceName,
Message,
Category,
EventCode,
User |
Export-CSV C:\Powershell\MonthlyMaintenance\$computer-Filter.csv
Echo "Done."Unfortunately adding that to the script just outputs a bunch of jargon:
#TYPE Microsoft.PowerShell.Commands.Internal.Format.FormatStartData
ClassId2e4f51ef21dd47e99d3c952918aff9cd
pageHeaderEntry
pageFooterEntry
autosizeInfo
shapeInfo
033ecb2bc07a4d43b5ef94ed5a35d280
Microsoft.PowerShell.Commands.Internal.Format.AutosizeInfo
Microsoft.PowerShell.Commands.Internal.Format.TableHeaderInfo
9e210fe47d09416682b841769c78b8a3
I did try adding it in various ways and removing the initial # Sort EventCode -unique | # and I just get the same jargon
Am I adding it in wrong some how?
Thank you again for any help.
param([string]$days= "31" )
$servers = @("ComputerName")
$user = Get-Credential
#Set namespace and calculate the date to start from
$namespace = "root\CIMV2"
$BeginDate=[System.Management.ManagementDateTimeConverter]::ToDMTFDateTime((get-date).AddDays(-$days))
$store = "C:\Powershell\MonthlyMaintenance"
foreach ($computer in $servers)
$filter="TimeWritten >= '$BeginDate' AND (type='Warning' OR type='Error' OR type='FailureAudit')"
Echo "Pulling Event Logs for $computer ..."
Get-WmiObject Win32_NTLogEvent -computername $computer -Filter $filter |
sort eventcode -unique |
select Computername,
Logfile,
Type,
@{N='TimeWritten';E={$_.ConvertToDateTime($_.TimeWritten)}},
SourceName,
Message,
Category,
User,
EventCode | Select Name,Count | FT -auto|
Export-CSV C:\Powershell\MonthlyMaintenance\$computer-Filter.csv
Echo "Done." -
My ipad has been disabled and now I'm trying to get it to work again. However, when I plug it into my computer it says that i need to type in the passcode, but i can't until it connects to itunes...also, my ipad has only been plugged into my friend's computer. it has never been plugged into a computer since then. Would this have anything to do with my problem?
This probably has nothing to do with plugging into your friends computer, but unless you have a backup, everything on the iPad will be lost.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
You will probably have to use recovery mode
http://support.apple.com/kb/ht4097
You can download purchased content again from the various stores as long as you use the same Apple ID, as long as the content is available in the stores, and as long as the content is available where you live. -
A running count of how many steps processed?
Hi, I'm using labview to monitor where I'm at in my teststand sequence. I have several goto statements in TS, meaning that certain steps are executed several times. I'm already using the Step.Index to find out which step I'm on, however I need to keep track of how many times that step has been called(goto loops). Is there a count index that increments for each step processed, regardless of goto loops? I've tried, the Loop.Index however it does not keep track of the Goto loops. Thanks for any help.
JoeJoe,
Teststand does not expose a variable that keeps track of how many times a current step has been executed in a Goto Loop. However, it keeps track of how many steps have been executed so far. This information is store in the property RunState.NumStepsExecuted. If you now how many steps are included in your loop, and if you also know the number of steps executed so far, then you can calculate the current iteration of your goto loop.
Hope this helps,
Alejandro del Castillo
Ni -
How to tell how many times a method has executed?
Hi, all
I've got a main class (Model.java) that repeatedly calls a step() method in a sub class (Ocean.java). I want Ocean.java to execute its step() method following one set of rules for the first time it is called by Model.java, and a different set of rules for all executions 2++. I was just going to use an if/else in Ocean.java's step() method to make it switch based on a boolean haveIExecutedThisStepOnce, or something like that. Is there some way to tell Ocean.java how many times it has executed the step() method? I'm using the RePast code libraries; Model.java uses a method called getTickCount(). It returns a double value of number of times Model.java's step() method has been executed, in which Model.java tells Ocean.java to execute its step() method. Should I pry that getTickCount() value out of Model.java and get it over to Ocean.java's step() method--and if so, how? Or, is there a better way to do this that I'm not aware of?Why do you think that this field has to be public?
Arguably if there's some functionality that is tightly associated with this counted method, then it should be part of the same class.
Alternatively, think about the counting variable. It should be with the thing that uses it.
So if class A wants to invoke class B method c once, do something else, and then invoke c some more, then that counting is really more an aspect of A than of B, and in that case the state should be in A. In that case the field really counts the number of times that A has invoked B.c, not the number of times that B.c has been invoked overall. Maybe that's what you want.
On the other hand if you really want to count the number of times that B.c has been invoked overall, then it's an aspect of B (or more likely an instance of B). In that case, rather than expose the counting state and the counted method, it would probably be better to create a new method d(). d() would invoke c(), doing something extra depending on the counting state. Make c() private. Like this:
class B {
private boolean c_has_been_called = false;
public void d() {
c();
if (!c_has_been_called) {
doWhateverYouNeedInThisCase();
c_has_been_called = true;
private void c() {
// and c() does whatever it normally does
} -
The database structure has been modified - how to check if it happend?
Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
HmgHi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish. -
Something to count how many times form has downloaded
Hi there.
DW CS3, PHP mySQL
I want to put on my site a PDF document that people can
download.
I don't want to link this to my mySQL DB for the records to
be added in the
DB.
But, I want to see how many times this document has been
downloaded.
It's almost like "autonumber" in Access.
I will really appreciate any advise and direction on how to
accomplish
this.
Thanx so much.
DeonThanx Joe, I will check it out.
I'm quickly building the download page.
Deon
Joe Makowiec <[email protected]> wrote in
news:[email protected]:
> On 14 Oct 2008 in macromedia.dreamweaver, Deon H wrote:
>
>> I want to put on my site a PDF document that people
can download.
>> I don't want to link this to my mySQL DB for the
records to be added
>> in the DB.
>>
>> But, I want to see how many times this document has
been downloaded.
>> It's almost like "autonumber" in Access.
>> I will really appreciate any advise and direction on
how to
>> accomplish this.
>
> It's available in your logs. Just do a search for
"myfile.pdf", and
> look for lines which have a 200 status code. (Status
code of 206
> indicates a resumed download; you don't want to count
those.) A
> recent sample; details changed to protect the guilty:
>
> 192.168.4.246 - - [14/Oct/2008:01:56:04 +0000] "GET
> /documents/town20080911.pdf HTTP/1.1" 200 20101
> "
http://www.example.org/minutes.asp"
"Mozilla/4.0 (compatible; MSIE
> 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)"
192.168.4.246 - -
> [14/Oct/2008:01:56:04 +0000] "GET
/documents/town20080911.pdf
> HTTP/1.1" 206 18572 "-" "Mozilla/4.0 (compatible; MSIE
6.0; Windows NT
> 5.1; SV1; .NET CLR 1.1.4322)"
>
> The first field is the IP address that the request came
from
> The second is date/time (in this case, in GMT)
> The third is the request with protocol
> The fourth is status code[1] followed by bytes
transferred
> The fifth is referrer; the sixth is user agent
>
> More information:
http://www.w3.org/TR/WD-logfile.html
>
> [1]
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
>
Maybe you are looking for
-
hi friends, Can any one give me some inputs on delete the cost center i have created center wrongly now i want to delete this i have tried but system is not accepting to delete the cost center the messege i am getting " deletion not possible (usage
-
Progress Bar or Progress Monitor for a system command
Hello, I am running a DOS copy command in a Java Swing application. I understand that I can implement a Progress Bar or a Progress Monitor if I open the first file, read it, and write to a second file. But if I have a need to use the DOS copy command
-
Can't paste copy into form design 'null'
I am designing a custom form. Anytime I try and paste copy I always get "null". Is this a limitation of Form Central as it is built in Flash?
-
Incoming Survey/Mail Problem
Hi Gurus, I met an incoming survey/mail problem, and need your help: "Survey" can be created and sent to vendor's external mail address successfully via the "Portal --> Supplier Evaluation --> Create Survey", but the problem is, the system could not
-
Automate turn airport on or off to save battery
i read a method in a book [are you allowed to mention names of specific books?] to toggle airport on and off by inventing a shortcut for it. i think it was something like system preferences>keyboard and mouse>keyboard shortcuts>+. the book said type