Keeping my query rows on one page.

Please take a look at this URL
http://dev.tms-hq.com/tmsreport.cfr
and please tell me how to keep the query records on one page
and not have the type and category elements repeated on 2 pages.
Thanks so much.

There's something covering the navbar on the About Me page. As soon as you get the navbar cleared it should work.
OT

Similar Messages

How to query on a single row form using only one page

Hi APEX experts, I am just a beginner in apex and I face several problems on development. Despite that the forum helps me a lot and your answers to other people are valuable , I have stacked into something. Could you please someone tell me : if there is a way to define a single row form page based on table in which I could query and update without using a tabular page (to call the single row form). I want only to use only one page. Does APEX has this functionality? Thank you very much?

I haven't tried it, but I am going to guess that yes it's possible (or if I were going to do this, this is what I'd try and I suspect it will work).
If you take a moment and step back and look at what the wizard does when building a "form on a table with report", all it does is build two pages with page 1 (report overview with drill-down Edit button or link usually) calling page 2 (form) and setting the PK field on the page 2 form with an automated row fetch process and built-in DML processes. It's not that hard.
Page 2 really doesn't care what the calling page was in order to query a single row; it just cares that ANY caller sets the primary key value for the ARF process to fetch a row. So I would just make page 2 call itself. This is what I'd do (and you might have to fine-tune little things that I might not have forseen but I think this will work).
For the sake of example, let's say our table is PARTS and in it is a PART_ID, PART_NUMBER, PART_DESCRIPTION, PART_COST, etc. Assume PART_ID is the primary key and sequentially assigned by the DB in a trigger and is functionally meaningless to the user and is for PK purposes only. Let's assume PART_NUMBER is a unique key (although not the PK) by which the user will "know" a unique row (since the PK of PART_ID is more internal and not meaningful to the user). Assume PART_DESCRIPTION, PART_COST, etc. are just attributes.
1. Use the wizard and build a "form on a table with report". This is just to get the handy dandy ARF process and DML processes, validations, etc. all generated for you. Let's assume the report page is Page 1 and the form is Page 2.
2. When done, delete the report page entirely (so delete page 1).
3. Edit the form page (page 2) and change any branch references from the nonexistent page 1 to now be page 2.
Now here's the part where something has to set the internal P2_PART_ID field when page 2 is run. So why not set it from itself from something the user will uniquely enter?
4. Create a P2_PART_NUMBER_FETCH item (text item is fine or if you want a LOV or whatever that's good too....whatever works. For clarity, you might even want to create a separate "search" or "query" region separate and above your existing form region to set this field apart visually so users know it's a search field. Source for this field should be "only when current value in session state is null".
5. Created some sort of "GO" button to go along with the P2_PART_NUMBER_FETCH field.
6. Make sure none of your existing post-submit processes fire when GO is pressed (edit all of the computations and validations and processes and ensure that they have conditions such that they do not fire when the submit value is "GO", so like a PL/SQL expression and set to v('REQUEST')<> 'GO').
7. Add a new validation to your page that only fires when GO is pressed. Have it validate only when GO is pressed. Have it validate that P2_PART_NUMBER_FETCH is not null.
8. Add a new PL/SQL process to your post-submit processing that only fires when GO is pressed. Have it look up to the database based on P2_PART_NUMBER_FETCH and get the PART_ID that corresponds to the part number the user entered and set the part number, something like this (even better for style and reusability if you embed this in a DB package function and call it):
SELECT part_id
INTO :P2_PART_ID
FROM PARTS
WHERE PART_NUMBER = :P2_PART_NUMBER_FETCH;
9. Not sure if the branches that were generated will suffice for this (might need to add a new one...review what you have and see) but the bottom line is that the page should branch to itself (page 2) and not clear the cache.
10. When the page repaints, since :P2_PART_ID is now populated in session state (again, page 2 should not care how it got populated...only should care that it did get populated by anything (including itself)), the automated row fetch (ARF) should fire and query up the row from the database for editing.

How to repeat a row when tablix columns print over more than one page

I have a tablix with 20 Columns. When this prints it prints over 3 pages (which is
OK). The first Column is the Name (in this case it is the
Project name). On Page 2 & 3 I want to print the Project name again,
so that a report user does not need to go back to page one to figure out which
project the columns are referring two. In Excel there is an option
"Rows To Repeat". I am trying to do the same in SSRS
2012.
I have tried links
like:
http://msdn.microsoft.com/en-us/library/dd207045.aspx
http://remicaron.wordpress.com/2010/01/05/how-to-get-ssrs-to-repeat-the-row-headers-tablix-2008/
http://www.sqlcircuit.com/2012/03/ssrs-how-to-repeat-column-header-in.html
These do not work
for me .... in fact they return an error msg
Can this be done?
Tx
Andrew
Andrew Payze

Hi Andrew,
If I understand correctly, there are 20 columns in the table. When it prints over 3 pages, the report should repeat the first column in all pages.
To freeze row header in the table, we can refer to the following steps:
The table should have a group. If the Name is already a row group, we can directly refer to step 2. Or we need add a row group grouped by Name ahead.
Right-click the table to open the Tablix Properties dialog box, then enable “Repeat header rows on each page” and “Keep header visible while scrolling” options under Row Headers category.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Master-Detail in One Page, on CREATE master, details show wrong rows

Hi all,
(ADF Faces + BC, 10.1.3 su5)
I am creating a master-detail add/edit page in ONE page.
Master : ADF Form, with Create, Submit, Commit, Rollback operation/button
Detail : ADF Editable Table, with Create, Submit, Delete operation / button
When first called, the page display the existing master-details in the collection.
When I press Create on master, I expect the detail table to be refreshed to BLANK, but it keeps on displaying the existing rows.
Detail table only becomes BLANK after I Submit the newly created master first.
So the question is :
How to make the detail table BLANK after I press Create on master ?
Thank you ,
xtanto

See section 10.4.3 "When to Use CreateInsert Instead of Create" in the ADF Developer's Guide for Forms/4GL Developers.

How to show all the rows of a report in one page

My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

How to keep a table on one page

Hi,
Is there any way to prevent a pagebreak in a table?
If a table is selected, then the Inspector-Text-More-Pagination&Pagebreak is grayed out.
I tried Inspector-Wrap-Object Placement-Floating, which indeed keeps the table on one page, but has all kinds of nasty side-effects. I really need to keep the table inline.
Thank you!

Archon,
In the Wrap Inspector, change the Table's property from Inline to Floating. Now you can position it on the following Page and avoid the split. Be careful though, because now you are fully responsible for the table position on the page and it will not split even if it grows larger than a page in length.
Jerry

How do I keep my HP1510 All-in-one from printing so many test pages?

How do I keep my HP1510 All-in-one from printing so many test pages? My printer is connected to my laptop, and it seems that every time I disconnect, the printer wants to print an test page when I reboot. I don't know where the option is to turn this off.
This question was solved.
View Solution.

The pages are likely alignment pages. When a new cartrdige is installed the printer will print an alignment page that must be placed on the scanner glass and the Scan button pressed to complete the alignment process. If the alignment is not completed it will repeat when the printer is turned on or perhaps at the end of print jobs.
The alignment page will stop printing when the alignment process has completed. See the page here for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Search criterias in one page, the query results in another page?

Hi, can I put search criterias in one page, and get query results in another page?
Need help
Thanks in advance
karman

If you meant a situation like: Page 1 has some items and page 2 has a report which refers page 1 itemsThen your report _query would fetch proper results provided the page 1 item values are available in the session_.
That is, after submitting their values(using page submit,dynamic action,ajax etx) to session state , their values would be available in any page (anywhere in that session ) , until the page cache for the item page(page 1) is cleared.

Multiple videos on one page - need to keep all visible once played

Hello all,
Firstly, I'll admit that I'm a novice as far as DPS goes...the app I'm working on is only my second attempt. I've managed to put the bones of it together, but I'm having problems with some video files.
I only realised today that you can't use InDesign's animation facility as it uses Flash (this app's for the iPad).
This is what I need to achieve: on one page, there are numbers 1, 2 and 3, running vertically. These are buttons. When each button is pressed, I want a line of text to fade in next to it.
I couldn't get this to work with an image sequence so I've created three movies. I dropped the first one in and it faded in fine when button one was pressed.
The problem is - when I press button 2, the text (movie) next to button one disappears. Is there any way to keep all three movies showing their last frame at once?
Sorry this is a bit long-winded....hope you can help people!
Cheers,
Anth.

I would rather use MSOs to get the effect you describe.
For each button a 2-state MSO would do the job perfectly.

2 Automated Row Processes for one page?

Hey people, me again ...
i have created 2 Regions on my Page. Each region has databasefields which references: RegionA -> a view, RegionB --> a table with the same ID (customer) ID)
For each region i have an ARF, which was generated by the wizard.
When i had just one Region the rowfetch worked fine. Now that i have the second Region i get a failure: "Row cannot be fetched" (debug shows that this happen in my second ARF).
I tried to change the process point from AFTER Header to everything what i can choose ... same failure.
If i change the sequence
ARF_A from 10 to 20 and
ARF_B from 21 to 10 then everything in my SECOND Region is shown.
Same happens when i set "Set Memory Cache on display" for the second ARF.
Isn't it possible to habe 2 ARFs for one page?
Or where is my failure?
Thank you for your help.
Jana

Hey,
first of all, thank you for your response.
In my first region there is a view over 3 tables. Works fine. I don't want to put more tables in this view because it is very big already.
So i want to have another region with just a single table.
Is there no way to have two ARF - processes on same page?

How can update two rows in one query?

How can update two rows in one query?
Edited by: OracleM on May 4, 2009 12:16 AM

What do you mean with "two rows"? May be two columns??
If the where clause of UPDATE query matches two rows, then it will update two rows. If you want to update two columns, then add column names to your query
UPDATE your_table SET col1=value1, col2=value2 WHERE your_where_clause- - - - - - - - - - - - - - - - - - - - -
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Each Row of one DataTable in a DataSet on a different page

HI.
I am making a report in Crystal Reports 2008. And I am building a .NET program to push an Access DB to the report.
I have a .NET DataTable object with my rows already in there merged into a .NET DataSet.
Then, I added the DataSet to a .NET CrystalReport object, and show it in a Windows Form.
I want each ROW of the Table to show on a different page. HOW? So, each row is entitled to a page or a new page if the row outrun the page.
Thank-you,
Ajay Shah

Hi Ajay,
This is a report design question, the data source does not matter.
I'm moving this post to the Designer forums.
Thanks
Don

When a single-page form expands to more than one page, can you reference the new individual "pages" that have been created by the expanding table?

Don't think this is possible but would love to be wrong.
Bullet Points:
1) In my demo form (simple hierarchy: form1.page1.table1.row1), 8 occurrences (instance "0" through instance "7") of the repeating row1 can be visible
     before it causes a page break and adds another "page". No issues there.
2) I'm thinking about trying to control the end-users navigation abilities to only on-screen "previous page" and "next page" buttons.
     (So no scrolling from page to page; keep them where we want them.) Only way I can see making this work is if the form is designed
     and coded to only allow one page to be visible at a time --- nesting things correctly in a parent object then hide all necessary subforms
     and only make the appropriate subform visible.
3) But when working with tables, when occurrence 9 gets added (aka instance 8), it triggers an on screen "Page 2" to be added.
     End user can now scroll between Page 1 and Page 2.
4) Once Page 2 has been added, is there a way to reference Page 1 (as we see it on screen) and set it to be hidden?
5) Is what we are seeing on screen as "Page 1" and "Page 2" actually this.resolveNode("page1[0]") and this.resolveNode("page1[1]") ?
     Tried messing around with referencing it this way but didn't seem to work. Maybe I had a typo but if we never set the subform named "page1"
     to allow multiple instances, I'm guessing it's not referenced this way.
Any thoughts would be great. Thanks so much to this community.
Brian

If you're looking at learning a bit more about database design (looking at your description of what you've done in creating a separate table for each category of item sold sounds like you're approaching it as though it was a flat-file rather than a relational database), there's a few books that I could direct you to:
Beginning Database Design (ISBN 978-1590597699)
Database Design for Mere Mortals (ISBN 978-0201694710)
Databases Demystified (ISBN 978-0072253641)
Absolute Beginner's Guide to Databases (ISBN 978-0789725691)
I've also got an older book that's always sitting by my desk called Dreamweaver MX Databases (ISBN 978-0782141481), which I still reference regularly - chapter 3 on coding practices and chapter 5 on database design provide very good overviews of the subject.
There's also a Database Development for Dummies, but I'm not a huge fan of the series where they're tackling technical subjects.
Without knowing the data you're modeling, it's quite difficult to make generalisations, but I'd probably be looking at a single table called 'Product' (which contains all the product records), and which had in it a boolean for 'new item' and for 'on sale' (you could then use SQL to filter out new and/or sale items when you create your recordset). I'd then have a look up table called 'Categories' which held the values 'necklace', 'handbag', 'belt', and 'purse' which the Product table could then reference to identify.
Breaking your data down into a logical structure like this is called 'normalisation' (see http://en.wikipedia.org/wiki/Database_normalization) - although it's a bit technical. There's a simpler practical explanation of a similar query to yours at TechRepublic (http://articles.techrepublic.com.com/5100-10878_11-5288500.html), which uses MS Access, but don't worry about that as it's teaching a concept which is applicable no matter what the database server.

Keeping my query rows on one page.

Similar Messages

Maybe you are looking for