Kerberos broken after name change

I set up my server as easeserver.easesoftware.net. I finally got the easesoftware.com domain so I changed the servers name to easeserver.easesoftware.com using the changeip command from the terminal. Most things worked but kerberos has never worked since.
A typical entry in the log file is:
Aug 02 18:29:36 easesoftware.com krb5kdc[258](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 64.192.143.213: UNKNOWN_SERVER: authtime 1154561376, [email protected] for krbtgt/[email protected], Server not found in Kerberos database
Oh... I forgot to mention: I am running 10.4 server as a OD Master.
I am tempted to move the OD back to stand alone server. Reboot. Then move it to OD Master and see if that cleans things up. But I'm afraid it won't.
Any suggestions of how to fix this?
Thank you very much
pedz

Back up the current /etc/krb5.keytab file and then use these instructions to change the file. This change is done automatically in Mac OS X Server 10.47; if you're not comfortable with following the instructions, use changeip to return to the previous setting, update the server, and then use changeip again.
(14883)

Similar Messages

Display name of shared calendar in Outlook clients after name change on the Exchange Server

I have changed the name of a conference room resource calendar on the Exchange server but the name change is not being reflected in the end user's Outlook clients. I tested a remove/re-add and that worked but I cannot have everyone in the company do this.
Is there anyway to force the change down to the Outlook clients?

I don't know for sure, but if this is the case, then it's highly likely that the GUID is used by the client after its first view of the calendar. From that point on, it appears it doesn't "revisit" the directory for updated names.
We'd need Outlook team feedback for confirmation.

Outlook does not connect to Exchange 2013 after name change due to marriage

When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
When it attempts to logon to the mail server the error comes up.
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Clicking "Check Name" gives the error:
"The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
The same result occurs with a manual setup.
We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.

Hi,
According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
Are all account or any special user experience this question?
If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
More details about Autodiscover service, for your reference:
https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
Please try below command to force update address list, GAL, OAB, then test again:
Get-AddressList | update-AddressList
Get-GlobalAddressList | update-GlobalAdressList
Get-OfflineAddressBook | Update-OfflineAddressBook
If the issue persists, please wait for some time to complete configuration.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Links Broken after server change

My Company changed servers recently (Including a new Server name) and all links to that server have been broken. I can manually re-direct these to the new path, but was wondering if any one knew of a batch edit/search and replace tool as after the server name everything remainds the same.

[ moved to the correct forum ]
It's not possible unless you use a custom plugin (i.e. write one). Scripting and automation inside Acrobat can create new links but cannot read the destinations of existing ones.

Can't access data after name change of account in Time Capsule

I started using Time Capsule (TC). After transferring data to 3 different accounts. I noticed that the process of entering/ connecting to your account takes to much time. You have to connect every time to the account on TC. Because of this I changed the account names in the Airport Utility to shortened two lettre names. Unfortunately with great negative impact!
I cannot access any data anymore. The new accounts are empty although I can see that there is still data on my TC because the available disk has not changed.Changing accountnames looks like you are creating new ones and blocking the access to the old ones.
1) How can I retrieve the data?
2) Can you create a 'super account' which can access all data of all accounts?
Jeroen
The Netherlands

How do you reset?
Hi..
What I wrote is my experience.. there is other opinions out there.
See https://discussions.apple.com/docs/DOC-2280
What I experienced was that applying user profiles over existing files resulted in nothing being visible.
But I am eggs spurt by self appointment only.. test everything.. hold to what is right.. reject the nonsense I will on occasion (unwittingly) spout.
To answer your questions.. press the reset button for 1sec will reset all user profiles to default. A longer press and it will get rid of them completely.. You will go back to default settings.
http://support.apple.com/kb/HT3728
The no user profile option is device password.. or disk password.. when you press reset it will return to device password.. that is the default.
Try what the reference above suggests.. but in my experience you cannot apply user profiles after copying material and still access it.

Apex-config.xml is broken after password change with encryption

Greetings,
I am using Apex Listener 1.1 with Oracle GlassFish Open Source Edition 3.1.
I found something strange when changing the connection password in apex-config.xml.
If I change the password to keep it plain text like the following, it works fine.
<entry key="apex.db.password">my_password</entry>
But if I change the password to a value to be encrypted, the new password is accepted but the configuration file get messed up.
<entry key="apex.db.password">!my_password2</entry>
After restarting the listener, I get the following content in my apex-config.xml.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
<comment> Updated: Mon Mar 14 10:58:16 EDT 2011 Version: 1.1.0.60.10.38 </comment>
</properties>
Needless to say that after the next restart nothing works. Am I missing something, or is this a bug?

You have corrupted your web.xml somehow, repeat the steps making sure the web.xml is well formed.

Help! Hyperion Planning Dimension formula no longer works after name change

Hi,
I am having an issue with Hyperion Planning. I recently changed an account's dimension name from ASales & Property Taxes (D) to AProperty Taxes (D). However, the original name was used in a formula of another account. When I ran my refresh I got the following error:
Error [1200354] detected in member formula for member "AFacilities Costs as a % of Revenue".
So I went into planning and went to the referenced account and looked at the formula. The formula still had the old member name ASales & Property Taxes (D) so I changed the formula to the new name AProperty Taxes (D). However, when I went to validate the formula I got the following error message:
Error compiling formula for [] (line 1): expected type [NUMBER] found [STRING] (["ASales & Property Taxes (D)"]) in function []
However, my formula has the new name not the old name. Here is my formula:
("AMaintenance (D)" + "AMaintenance (SG&A)" + "ANon Cap Equipment & Rentals (D)" + "ANon Cap Equipment & Rentals (SG&A)" + "AOperating Leases (D)" + "AOperating Leases (SG&A)" + "ARent & Occupancy Costs (D)" + "ARent & Occupancy Costs (SG&A)" + "AProperty Taxes (D)" + "AProperty Taxes (SG&A)" + "ASecurity (D)" + "ASecurity (SG&A)" + "AInsurance (D)" + "AInsurance (SG&A)")/ARevenue;
Does anyone know how to fix this problem? Please help, as a result of this issue none of my accounts or clients are getting pulled into the Balance Sheet causing it to not tie with Oracle :( Thanks!!

Hi,
What happens if you try and refresh with updating the formula to reference the correct name?
You won't be able to validate the formula because the member does not yet exist in essbase until the refresh has completed.
If you have problems you could always, remove the formula and store it, refresh so the new member gets created, then put the formula back and refresh again.
Cheers
John
http://john-goodwin.blogspot.com/

Lightroom Looses Files After Name Change by Bridge

If I use Bridge to change the names of files in my Lightroom DB when I open Lightroom those file's thumbnails have a "?" on them and Lightroom says it can't find them.
I look for them manually and they are in the Lightroom storage folder with their new name.
Is there a way for Bridge and Lightroom to tell each other what they have done to save this extra step of locating the files and IDing for Lightroom one by one?
Or should I just stop using bridge and stay with Lightroom only?
Thanks,
Tom

Or should I just stop using bridge and stay with Lightroom only?
I'd say: yes, of course! (But this will certainly start a heated debate ; - )
Alexander.
Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

Can't update apps after name change.

I just recently changed my iTunes name. I made sure I logged in with it on my computer and did so with no problem. Now I also updated that info on my iPhone 4. I can buy apps with no problem whatsoever, however when I try to update my apps from the app store via iPhone, it keeps asking for the password to my old username and not my new one. Even of I did enter the password for it, it says that it is incorrect. How can I get my phone to recognize my new username for updates. Remember, there is no problem when buying the apps. It asks for the pass to the correct name.

You will have to call 1-800-MY-APPLE for a resolution. Apple will be able to consolidate the two accounts, but it can only be done over the phone. It's under the [FAQ|http://support.apple.com/kb/HE37] section for Apple ID's.

Batch rename, name changes after frame 99

Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
After frame 99 the name changed to a weird Adobe Bridge Batch Rename Temp 10037
Which you can see better in the RAW windows, the 99 and the following one.
Photoshop doesn't like to open a name like that, can't blame her.
of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks dona

no,no, i started with 00 two digits only, batch rename changed to 623 after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
See, this is the first number that was given to the first file, 01,WHICH actually became 00, i don't have it here.
So it rest to know where is "Preserve file name " in current metadata, and would that make it possible to revert to the original CR2 number?
Why not to change name straight from the new name? thanks

Authentication popups after computer name changed to computer record name

Hi
I'm not sure if anyone else is facing this issue, but I have been unable to find anything in the forums.
I have setup a number of client machines on Lion Server, all using 10.7.4. I used WGM and Remote Desktop to make some changes and deploy software
Since then, I have been getting the following authentication popup on all client machines (twice after login, and then every 30 mins or so afterwards):
Mac OS S wants to make changes. Type an administrator's name and password to allow this.
The changes made prior to this happening were:
- Overplay VPN installed (using RD pkg install)
- Adobe CS 5.5 installed (using Adobe Enterprise Deployment Tool and RD package install)
- Evernote installed (using RD copy)
- Set computer name to computer record name (From WGM > Computer Groups > Preferences > Options)
I have now removed all the installed software from one machine, and log in as administrator, unbind the machine, rename the computer manually to the record name, rebind the computer.
As far as I can see, I have reverted all changes one at a time, and am still receiving the admin password requests when logged in as a network user.
The only machine that seems to be ok, is the one where the name change to computer record name was unsuccessful.
Does anyone have any suggestions as to how I can fix this issue?
Thanks
Suraj

Issue resolved. It turns out none of my changes caused the issue as much as Google Chrome Autoupdates. The new version constantly checks for updates which makes clients on Lion Server go haywire. Solution to turn off auto-updating:
Open a Terminal window:
defaults write com.google.Keystone.Agent checkInterval 0
Relaunch Chrome.

Cannot contact user after a name change

One of our users got married and changed her last name. My colleagues changed her name and alias in AD and in Exchange, and they changed her email address, keeping the old address as a secondary SMTP address in Exchange. I ran the following command
on the Lync server:
Set-CsUser -Identity "CN=JNewname,OU=HQ,DC=Corp,DC=Com" -SipAddress sip:[email protected]
After the user logged off the Domain and then logged back on, she could log in to Lync and could initiate an IM conversation with me. However, I still cannot contact her. She was never in my favorites list, and when I start typing her new alias,
she shows up in my Lync client with her new name and then "Presence unknown". When I try to initiate an IM conversation with her, my Lync client says "We couldn't send this message because we couldn't find Newname, Jane".
I have tried deleting the Lync local cache from my client machine and still have the same errors. What am I missing with this name change?
Thank you very much for your help.

Thank you! That must have been what I should have done after I changed the sip address. As it turns out, the contact had started working sometime before you posted this. Does this update process take place automatically over time and the
Update-CsAddressBook command would have forced the update immediately? I had changed the sip address about 2 hours before I posted this question.
Thanks so much for your help. I will incorporate this into a memo I am writing for making a name change.

EM not working Properly after computer name change

Hi Friends,
i hav 10gr2 DB, everything was fine.
last week my computer name changed, and EM stops to work.
so i reconfigure EM through command line.
after that EM started, but when go to 'Performance' or any other tab in browser.
its asks for login and shows 'oldcomputername:orcl:1521' in connection string.
so whats other things , i hav to change?
Thanks

Search every file under $ORACLE_BASE for the old name.
Assuming *NIX use find and grep.
Why do people rename servers? A name is a name is a name. All it ever does is cause problems.

HBA controller name changes after upgrading to solaris 11.2 from solaris 11.1

we have upgraded OS on control domain from Sol 11.1 to Sol 11.2 . After upgrade controller name of HBAs and NPIV wwns changed ( like if it is c2 prior to upgrade , post upgrade controller name changes to c8). Due to this we have to redo virtual disk mapping for all ldoms hosted on this machine. . Would it be possible to preserve the HBA controller names across OS versions ? we even observed this issue while upgrading SRU of solaris 11.2 system. We have to upgrade around 20 systems to solaris 11.2 and with this issue upgrade seems to be a tedious task. Any idea if there is any fix or workaround for it ?

Are your disks only connected to one single HBA?
We use MPXIO to MultiPath over Multiple HBAs. Controller never changed here for the MPXIO devices.
Best regards,
Marcel

NitroX license disabled after computer name change

Hi,
We had to change the network names on several windows development machines containing the Nitrox environment.
After that change Nitrox wouldn't want to start on any of these boxes, failing to reactivate the license ("No activations left for this serial number").
That's certainly caused by Nitrox not recognising the machine it's installed on anymore.
What should we do now ? If only we had access to an admin console where we can control our own licenses it would be so simple.
Thanks in advance,
C dric Paternotte
SITEL Fribourg - Switzerland
Order Id INT001-5576
Nitrox 2.1.0M3 build 419, Eclipse 3.1.0, Windows XP SP2

Hi,
We are looking into this issue. In the mean time deactivate the license before modifying any of the system information.
If you are facing the activation issue, please contact [email protected] with OrderId & Serial#
Thanks,
M7 Support

Kerberos broken after name change

Similar Messages

Maybe you are looking for