Kernel 2.6.19-beyond and i810 driver problem

while i was using kernel 2.6.19-beyond 
glxinfo|grep render
command returned me like this:
[titus@blackbox ~]$ glxinfo|grep render
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset.
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 852GM/855GM 20061017 x86/MMX/SSE2
but now i am using kernel 2.6.20 (not beyond) and that command doesn't return me like above anymore.  does it means  "i can't use kernel26beyond with an interl graphics card?"

Titus wrote:
while i was using kernel 2.6.19-beyond 
glxinfo|grep render
command returned me like this:
[titus@blackbox ~]$ glxinfo|grep render
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset.
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 852GM/855GM 20061017 x86/MMX/SSE2
but now i am using kernel 2.6.20 (not beyond) and that command doesn't return me like above anymore.  does it means  "i can't use kernel26beyond with an interl graphics card?"
nope, should work fine, i remember seeing this on one of my computers and there were no problems. that said, it shouldnt appear in any future versions.

Similar Messages

  • K8N nForce 4 (CK804) and SATA drive problems

    Hi,
    I have a K8N Neo MB with a 4 port sata and RAID. It seems that it is not stable with sata drives at all.
    I had at first 2 120G SEAGATE drives. I kept getting random hangups from windows AND linux. I thought it was a problem with one of the drives to I booted with one of them at a time and worked a bit... it seemed the problem went away.
    but later, after a week or so, it seems everything comes back again. same problems with freezes and hangups.
    when windows for example freezes, and i press reset. at the boot screen, the POST would hang up at the step which detects the SATA drives. it would stay like this foreever.
    I would have to totally shut down power for a few seconds and boot again.
    I tried working with pata drives and its totally great and stable. no problems. if i install a sata drive with the pata, i get the same hangup problems.
    i bought another seagate 80gb sata drive just to make sure that the older 120gb were not a problem. it worked for me fine a t first, but started to do exactly the same afterwards
    i tried to access the drive from linux in order to trace the access pattern of the drive and get a sense of what was going wrong. Here is the syslog from the kernel messages.
    any help with that issue is highly appreciated. thanks
    Mar  8 22:01:15 ubuntu kernel: [  715.201288] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
    Mar  8 22:01:15 ubuntu kernel: [  715.201297] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
    Mar  8 22:01:15 ubuntu kernel: [  715.201300] ata1: status=0xd0 { Busy }
    Mar  8 22:01:15 ubuntu kernel: [  715.201308] sd 0:0:0:0: SCSI error: return code = 0x8000002
    Mar  8 22:01:15 ubuntu kernel: [  715.201310] sda: Current: sense key: Aborted Command
    Mar  8 22:01:15 ubuntu kernel: [  715.201313]     Additional sense: Scsi parity error
    Mar  8 22:01:15 ubuntu kernel: [  715.201318] end_request: I/O error, dev sda, sector 39086208
    Mar  8 22:01:15 ubuntu kernel: [  715.201322] Buffer I/O error on device sda5, logical block 0
    Mar  8 22:01:45 ubuntu kernel: [  731.858112] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
    Mar  8 22:01:45 ubuntu kernel: [  731.858121] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
    Mar  8 22:01:45 ubuntu kernel: [  731.858124] ata1: status=0xd0 { Busy }
    Mar  8 22:01:45 ubuntu kernel: [  731.858132] sd 0:0:0:0: SCSI error: return code = 0x8000002
    Mar  8 22:01:45 ubuntu kernel: [  731.858135] sda: Current: sense key: Aborted Command
    Mar  8 22:01:45 ubuntu kernel: [  731.858137]     Additional sense: Scsi parity error
    Mar  8 22:01:45 ubuntu kernel: [  731.858143] end_request: I/O error, dev sda, sector 39086208
    Mar  8 22:01:45 ubuntu kernel: [  731.858147] Buffer I/O error on device sda5, logical block 0
    Mar  8 22:02:15 ubuntu kernel: [  748.515491] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
    Mar  8 22:02:15 ubuntu kernel: [  748.515501] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
    Mar  8 22:02:15 ubuntu kernel: [  748.515504] ata1: status=0xd0 { Busy }
    Mar  8 22:02:15 ubuntu kernel: [  748.515511] sd 0:0:0:0: SCSI error: return code = 0x8000002
    Mar  8 22:02:15 ubuntu kernel: [  748.515514] sda: Current: sense key: Aborted Command
    Mar  8 22:02:15 ubuntu kernel: [  748.515516]     Additional sense: Scsi parity error
    Mar  8 22:02:15 ubuntu kernel: [  748.515523] end_request: I/O error, dev sda, sector 39086208
    Mar  8 22:02:15 ubuntu kernel: [  748.515526] Buffer I/O error on device sda5, logical block 0
    Mar  8 22:02:15 ubuntu kernel: [  750.227687] Losing some ticks... checking if CPU frequency changed.
    Mar  8 22:02:45 ubuntu kernel: [  765.554638] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
    Mar  8 22:02:45 ubuntu kernel: [  765.554651] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
    Mar  8 22:02:45 ubuntu kernel: [  765.554654] ata1: status=0xd0 { Busy }
    Mar  8 22:02:45 ubuntu kernel: [  765.554666] sd 0:0:0:0: SCSI error: return code = 0x8000002
    Mar  8 22:02:45 ubuntu kernel: [  765.554669] sda: Current: sense key: Aborted Command
    Mar  8 22:02:45 ubuntu kernel: [  765.554672]     Additional sense: Scsi parity error
    Mar  8 22:02:45 ubuntu kernel: [  765.554681] end_request: I/O error, dev sda, sector 39086208
    Mar  8 22:02:45 ubuntu kernel: [  765.554686] Buffer I/O error on device sda5, logical block 0

    the answer for this problem is very simple.. I was having EXACTLY THE SAME PROBLEM as you... I changed 3 hds sata 200gb because I wasnt finding out the cause... so I found this link:
    http://www.msi.com.tw/program/service/faq/faq/esc_faq_answer.php?L_kind=1&Q_LIST=1141&NA=637
    The problem is the NCQ technology... just disabled it and everything will be fine... i did this here and now is everything PERFECT! lol
    regards!

  • K9A2 Platinum Audio and Video Driver problems.

    I put together my new rig last night and am having a lot of problems with drivers.  The rig installed windows XP SP2 in about 10 minutes though   
    Rig:
    MSI K9A2 Platinum Bios 1.3
    Phenom 9850 BE
    G.SKILL 1066 5-5-5-15 2T
    MSI HD 3870 OC
    WD Raptor
    CoolerMaster 550watt
    Several fans to keep cool air flowing.
    My problem is that I can not find good audio or video drivers.  I started by trying the audio drivers included with the board, but they would not complete the install.  I ended up downloading audio drivers from the MSI site, however they also would not install with the "#-0001" error message.  I followed the instructions on the forum: https://forum-en.msi.com/index.php?topic=115396.msg866810#msg866810 including installing the MS HD Audio Driver Hotfix but still cannot get sound working.
    To further complicate my problem the 3870 has HD onboard, which makes a second instance of Microsoft UAA HD Audio driver in the device manager, and also tries to find drivers for bits of it's audio hardware.
    Currently I have disabled on-board audio completely through the bios, and now everytime I boot-up I get new hardware found for UAA HD Audio, and also some Media interface.  Clearly this is the HD on the 3870, however I can't seem to get drivers installed that will agree with the hardware thus the message continue to pop-up!
    Does anyone have suggestions or similar experiences?

    Quote from: AMDloyal on 24-April-08, 09:56:10
    Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Does anyone know if this indicates a hardware of driver problem?
    "Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them."
    you are done well.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Provide screenshot from Device manager.

  • Mixing IDE hard drive's and optical drive problem

    So the other day on ebay i bought an adapter plate that allows me to fit a hard drive in an optical drive bay, in the mac pro as you know the optical drives are connected over IDE and i had an old IDE hard drive lying around i wanted to make use of for a windows partition, i installed the drive below the optical drive fine and plugged them both in and both the optical drive and hard drive are in cable select mode but now when i boot up neither the optical drive or hard drive are recognized.
    in theory this should work as there both ide devices on cable select mode. what am i doing wrong here or can i simply not mix an ide optical drive and hard drive?
    Will

    Ok thankyou, ive gotten the number of a local apple specialist repair centre and im going to ring them to get a quote, if it costs lots i wll do it myself, and i have an 80 pin cable lying around a really high quality one so i may end up using that
    once again thankyou very much
    maybe next time ill be more careful

  • MOVED: K8N Neo2 - WinXP and Raid driver problem

    This topic has been moved to AMD64 nVidia Based board.
    K8N Neo2 - WinXP and Raid driver problem

    Quote from: SillySider03 on 18-June-05, 22:18:50
    Try This.
    Yes it worked... I did it a bunch of mins ago, ty a lot anyway 

  • [Athlon64] Cool n Quiet and AMD driver problem...

    I hate to be the one to start another cool and quiet thread, but this is a problem I can't figure out. I have been running cool and quiet on my NEO Athlon 64 motherboard for over a year now, and it has worked perfectly, until today. I re-installed windows, because it was giving me problems, thanks to one too many virus and spyware attacks over the past year. Anyway, I installed windows, installed service pack 1, and all the assorted drivers for my hardware. I downloaded the latest AMD cpu driver and installed it. I have my power option set to minimal. I have everything just as it was, but the cool and quiet never kicks in. I am monitoring it with the Cool and Quiet panel, and it just sets at 2000 mhz. Cool and Quiet is turned on in the bios, and so is acpi. Windows xp reports having ACPI installed. I'm stumped. Is the fact I am using SP1 and have not upgraded to SP2 have anything to do with this? I notice the latest AMD cpu driver mentions it is for winxp SP2. I am avoiding SP2 because it has an issue with software that I use on my network. If it's because of SP2, is there a site I could download the older AMD cpu drivers from, to get this thing working? Thanks for any help you can offer.

    Hello dude!
    Well I remember to be in the same case, but when I reinstalled the WinXP, it comes with the SP2 integrated and I just active the Cool n Quiet installing the AMD Power Monitor lasted version and set se PM to Minimal, and it works perfectly, And about your problem with the WinXPSP2 Firewall you just have to unmark the LAN protection from the Firewall settings and thats all...
    Enjoy the Life, Enjoy AMD... 

  • Both nouveau and nVidia driver problems with Stellarium

    Stellarium v0.12.4 with either xf86-video-nouveau 1.0.9-1 or nvidia (latest driver) and an nVidia MCP78S (GeForce 8200) chip usually results in either distorted graphics and sometimes complete system lock-up.
    The nVidia driver is worse, nouveau sometimes works but its a crap shoot. This has been going on for about 2 months now, and I have tested both drivers.
    With nouveau it dumps these boot errors, but works on other software just fine:
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100230
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4
    I cannot use the nvidia driver in general because it sometimes causes graphics faults when using Chromium.
    I don't get any other graphics issues other than with Stellarium (and obviously I cannot run google-earth with nouveau either).
    Any ideas on where to start with this problem would be appreciated.

    Thanks for answering!
    Following your advice, I downloaded and installed the latest driver from Nvidia (http://www.nvidia.fr/object/notebook-win7-winvista-64bit-260.99-whql-driver-fr.html). I'm not sure this is the one I updated on the first place since I don't remember when I did it (it was a few months ago, and as I had internet without using wi-fi, I didn't see that much the BSOD, but now that I'm back to wi-fi, the problem occurs often). Until now, no BSOD, but the first problem "Display Driver Stopped Responding and Has Recovered" is still here, and a little bit more annoying since it can occurs while watching some video files (it didn't happen before).
    For the BIOS problem, it was the one described on the link you gave, but no the problem is over. I was just thinking it could be relevant to understand the others problems.
    I'll let you know if the BSOD is (or seems) definitively gone. In the meantime, if someone knows how to fix the problem of the display driver that stopped responding and was recovered, it would be greatly appreciated!

  • Time capsule and NAS drive Problem

    Currently have my TC connected to my wireless router via its only ethernet port.  I want to add a NAS drive but as there is no port left onthe router, can I use one on the TC??

    Does your cable modem have an Ethernet port? If it does, then connect an Ethernet cable from the modem to the TC. You do not need to use the WiFi from the cable modem. The TC will provide both wired and wireless networks. The second NAS can be connected via Ethernet cable to one of the LAN ports on the TC.
    I use just a cable modem (it does not provide any routing - it's a Motorola SurfBoard) connected by Ethernet cable to the WAN port on an Airport Extreme Base Station which is basically the TC's router but without an internal hard drive. Then any Ethernet device connects to one of the LAN ports on the AEBS.

  • Vista x32, Zen V and V+ driver problems - also posted in Vista sect

    ?<p class="MsoNormal">Have tried to install software, when registration asks for device to be connected, i connect. Windows detects as 'Creative Zen V', can't find a driver then lists it as an MTP device, and as a failure to install. The registration tool is no help. I have repeatedly gone to device manager and uninstalled the 'MTP device' and repeatedly reinstalled your software and redone every program I can find with creative. I have searched your knowledge base, no help. I have tried to hard search windows for the driver, and pointed the detection to creative folders, don?t help. After EVERY failed installation, windows media and all creative software does not see the player (i have 2 an 8gig and gig, white and black) but instead an MTP device (with a yellow Exclamation pt in device manager).
    <p class="MsoNormal">?
    <p class="MsoNormal">Have tried to install software, when registration asks for device to be connected, i connect. Windows detects as 'Creative Zen V', can't find a driver then lists it as an MTP device, and as a failure to install. The registration tool is no help.
    <p class="MsoNormal">?
    <p class="MsoNormal">I have tried the Microsoft hotfix - won?t install, says not compatible with my system. Have Intel x64 chip, but vistax32, computer came that way. Can't update firmware as player never is correctly recognized.
    <p class="MsoNormal">?
    <p class="MsoNormal">?
    <p class="MsoNormal">Had a Windows XP machine before and eventually I got them to work. Why won't Vista find drivers? Both players work fine and charge, they just won?t synch to my new computer due to no drivers. My old XP machine went belly up (hardware issue) so that is no longer an option.
    <p class="MsoNormal">?
    <p class="MsoNormal">Repeatedly emailed Creative tech - NO HELP. Responses look like they NEVER read my thorough explanation and send me different form letters.
    <p class="MsoNormal">?
    <p class="MsoNormal">Frustrating, uninstalled and reinstalled probably 50 - 00 times.
    <p class="MsoNormal">?
    <p class="MsoNormal">Please help.
    <p class="MsoNormal">?
    Kevin.

    Would somebody help?
    Many previous posts say to update firmware, can't as I no longer have an XP machine, besides I know I bought the 8gig well after VISTA was out, I think December 2007. No excuse for not having correct firmware.

  • Volume needs repair AND hard drive problem...

    OK so I have an Intel Based iMac and its about 1 year old. Randomly I got a message saying that the hard drive disc space is almost full, which makes NO sense. I have a 250 hard drive and I use it mainly for video editing. Before I got this message, I had about 100 GB left on my hard drive. I have NO CLUE where 100 GB went to, and i know it was not from video. Also I went to the disk utility and it said "Volume needs repair" and it gave me an "The underlying task reported failure,". Im not sure what to do and I'm hoping you guys will.....if this has been asked before, I apologize.

    Yes, you can delete it, but it indicates a bigger concern namely your maintenance scripts aren't running regularly to clean up the logs or you have a problem in the system or an application that is writing huge amounts of information constantly into the log file. You should check the log using the Console application (Utilities folder) and examine its content to see if this is the case.
    You should also read the following for information on installing utilities that can assure the maintenance scripts are run as well as other information on system maintenance that can help keep your computer running better.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.

  • TV@nywhere and WDM driver problem-a weird one!

    I just bought a TV@nywhere card, as an upgrade to my old Hauppauge WinTV card... I installed all the driver updates, and it looks and works great using the MSIPVS software. But, whenever I try to use the card with any software that uses the "Microsoft WDM Image Capture" driver, the video is either green or black and white with tiny vertical lines running through it.  ;(
    I made sure all the references to my old card were deleted from the registry, I reinstalled the TV@nywhere drivers... Nothing seemed to help.
    Some Windows programs (like netmeeting) don't even recognize that I have a video device at all, and the ones that do give me the b&w or green screen.
    Here's the weird part:
    Finally, out of desperation, I opened Windows Movie Maker 2, the default program that comes with Windows. It named the Conexant chipset by name, and I was able to use it to record from my TV@nywhere card! Success! After doing this, I tried the programs that provided the B&W/green screens before, and they worked fine!
    I thought I had permanently fixed the problem!
    But now, every time I reboot, those programs that use the "Microsoft WDM Image Capture" driver go back to B&W/green... I have to run Windows Movie Maker 2 every time I reboot, record like a 5 second video, and close it to make these other programs behave normally. I'm out of ideas as to why this is happening. Can anyone help?
    SPECS
    Windows XP Pro SP1 (clean install 1 week ago)
    MSI TV@nywhere card (correctly installed with no !'s or ?'s in Device Manager)
    All 3 MSI TV@nywhere patches applied
    Athlon XP 2000+
    512MB RAM
    120GB HD
    MSI Geforce 4 MX
    SB Live
    ECS K7S5A MB (with latest BIOS and SIS chipset drivers)

    Well, I am using XP, and WMM 2 comes with XP. The recording quality seems to be the same in MSIPVS and WMM 2.
    Something else I noticed... I downloaded some new webcam software, and it lists 2 drivers: the same WDM video driver (with the same problems I described) and also a DIRECTX capture driver, which lists the Conexant chipset by name, and captures fine.
    Could this be a DirectX issue? I am using DirectX 9.0a . I e-mailed MSI 3 days ago with a question about this but received no response. This forum is my only hope in solving this.
    Quote
    Originally posted by kody
    I am curious.  Is the picture recording quality better then the intervideo msipvs software when you record with windows movie maker 2?  If it is, I might buy windows movie maker 2
    and then I will let you know if it works properly under
    windows ME.   Maybe, it is a windows 2000 issue?

  • Sandra 2004 and hard drive problem

    Since I ran Sandra 2004 my hard drive scores on other benchmarks PCMark etc all show my HD scores have taken a dump. I know that something is changed but I can't find it. ATA is mode 5 as it always is, 32bit(or is it 64?) is enabled, diagnostics show the HD is fine. S.M.A.R.T. is fine but score went from 550 to 107 on PCMark. Ouch.
    I also noticed Windows takes way longer that it used to to boot.
    Has anyone seen this? I can't find any post with similar issue. I'm in the process of adding SATA RAID0 so the problem will be moot but would really like to know what the heck happened.

    My 2 10,000 RPM Raptors in RAID 0 scored high 60s in SANDRA when I 1st installed. Now I can't get above 39. This is despite the fact that all of the reliable HD benchmarks show my RAID0 Array still cookin along. I really would not trust SANDRA's HD Benchmark (only really unreliable SANDRA test as far as I can tell). Try Hard Drive Tach and AIDA32's HD Plugin for a more realistic gage. Good luck!
                   damon69

  • K8n neo Platinum and Optical Drive problem?

    I need some help figuring this out.  I've been searching for awhile but can't find any more information so I figured I'd ask here.  
    I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
    The problem is on the 411S where it will read the DVD/CD disk but when I try to use Cyberlink PowerDVD or Nero Recode to play or read the DVD it will just hang.  If I don't try to play these files and just open them in explorer then I can access them.  
    I'm trying to see if there are some conflict issues with the nforce drivers but am still looking.  
    My setup is this.  
    AMD 64 3000+
    K8n Neo Platinum nforce 3 250 Bios 1.4
    Western Digital 120 gb hd
    PQI 3200 1 gig memory
    PNY 6800 GT
    Audigy 2
    Antec Trupower 420
    Any help would be great as I'm totally stuck.  Thanks.
    Also to note I can play DVDs and use recode fine off the DVD rom drive but just not off the DVD writer (411s).

    Quote
    Originally posted by BluddSimple
    I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
    You might have better luck making the reader the slave on the channel your HD is on. I had both a burner/writer on the same channel and while it worked, the performance was very poor.
    Man, I need to get around to posting my specs someday, but I have the same MB and BIOS as you. I'm also using the nForce unified drivers including IDE.

  • K8n neo platinum and hard drive problem...

    greetings...
    well, I have K8n neo platinum mobo with SATA1 controller, and I bought WD 250 GB sata2. I did set up jumper to limit transfer to SATA1 mode on my new drive (although I tried it without jumper, it is the same). Hard disk is working but, I have varying trasfer rate when I copy files from WD250 on other drives, and when copying on that drive. Transfer is going fine, and then it goes very very slow, then again fast, then again slow...And, sometimes, when I am copying large amount of data on that drive, my computer freezes. When I test sustained speed, it is different almost every time (goes from 14 to 65)...
    I searched thru internet - with no sucess. I have very good power for my PC. I changed sata cables, and power cables. I updated all drivers. I tried installing XP IDE drivers for that new SATA2 hard disk. I tried almost everything, and with no sucess. WD250 is working fine for, let's say, a couple of hours, and then it again goes slow with varying transfer rate when copying. I also have a very good cooling system, so it's not because of overheating. I contacted WD, they told me to run their diagnostic tool, and the disk was healthy. They said that drive is ok then, and that it is probably my mobo that is causing problems.
    anyone have a clue what is going on?
    thanx in advance

    damn...
    can't believe no one ever had similar problem...

  • Help...KT3-Ultra2 and Hard drive problems

    Hello, I'm new to this board.  I've been having an issue with hard drives lately.   I have an MSI KT3-ultra2 with the latest BIOS version installed.  I recently had a hard drive get completely erased and the actually size of it (10gig) had changed to 1 gig.  Just prior to that I got a corrupted file error in a game I was playing.  (The 10gig HD was a storage drive).  My main drive (Maxtor 40gig) started to clunk and whine and then eventually the computer would lock up hard.  I assumed the HD was going bad and was the cause of all the corruption.  So I went and bought a new WD Hard drive 80 gig.  Had it for about 2 weeks now and now all of a sudden I'm getting a similar clicking noise and a whine and then it locks up on me.  I can only run my computer for about 10 to 20 minutes before it locks up.  I have changed IDE cables to see if they were the cause and that didn't solve the problem.  I've also disconnected all my CD drives and still nothing.  I am going to take a guess and assume there is something wrong with my MB.  IDE controler perhaps?  Can anyone help me with this or confirm my thoughts on the situation?  Any help is greatly appreciated.  Thanks

    May be your powersupply is faulty. Or the memory? try to get it checked

Maybe you are looking for