Kernel memory usage
Is there a way to see both the kernel virtual and the kernel real memory
usage. I can see the real memory usage with "sar -k", or the "arena_size"
in the "kmem_misc" kstat, or by looking at all the "kmem_cache" kstats
like the crash "kmastat" command. But, can I find out how much is not
"resident"?
All of the kernel memory in use as reported by sar -k is resident and not paged (see kmem_alloc(9f)). That is why drivers must be careful how they use it.
As for virtual address space, everything above the value of the kernelbase variable (see param.h)is kernel virtual address space.
I think 0xE0000000 is the default for kernelbase on sun4d and Intel.
Hope that helps. Regards,
Ralph
SUN DTS
Similar Messages
-
Solaris 10 Kernel memory usage
We have a 32 GB RAM server running about 14 zones. There are multiple databases, application servers, web servers, and ftp servers running in the various zones.
I understand that using ZFS will increase kernel memory usage, however I am a bit concerned at this point.
root@servername:~/zonecfg #mdb -k
Loading modules: [ unix krtld genunix specfs dtrace uppc pcplusmp ufs md mpt ip indmux ptm nfs ]
::memstat
Page Summary Pages MB %Tot
Kernel 4108442 16048 49%
Anon 3769634 14725 45%
Exec and libs 9098 35 0%
Page cache 29612 115 0%
Free (cachelist) 99437 388 1%
Free (freelist) 369040 1441 4%
Total 8385263 32754
Physical 8176401 31939
Out of 32GB of RAM, 16GB is being used by the kernel. Is there a way to find out how much of that kernel memory is due to ZFS?
It just seems an excessively high amount of our memory is going to the kernel, even with ZFS being used on the server.root@servername:~ #mdb -k
Loading modules: [ unix krtld genunix specfs dtrace uppc pcplusmp ufs md mpt ip hook neti sctp arp usba uhci fcp fctl qlc nca lofs zfs random fcip crypto logindmux ptm nfs ]
::memstat
Page Summary Pages MB %Tot
Kernel 4314678 16854 51%
Anon 3538066 13820 42%
Exec and libs 9249 36 0%
Page cache 29347 114 0%
Free (cachelist) 89647 350 1%
Free (freelist) 404276 1579 5%
Total 8385263 32754
Physical 8176401 31939
:quit
root@servername:~ #kstat -m zfs
module: zfs instance: 0
name: arcstats class: misc
c 12451650535
c_max 33272295424
c_min 1073313664
crtime 175.759605187
deleted 26773228
demand_data_hits 89284658
demand_data_misses 1995438
demand_metadata_hits 1139759543
demand_metadata_misses 5671445
evict_skip 5105167
hash_chain_max 15
hash_chains 296214
hash_collisions 75773190
hash_elements 995458
hash_elements_max 1576353
hits 1552496231
mfu_ghost_hits 4321964
mfu_hits 1263340670
misses 11984648
mru_ghost_hits 474500
mru_hits 57043004
mutex_miss 106728
p 9304845931
prefetch_data_hits 10792085
prefetch_data_misses 3571943
prefetch_metadata_hits 312659945
prefetch_metadata_misses 745822
recycle_miss 2775287
size 12451397120
snaptime 2410363.20494097
So it looks like our kernel is using 16GB and ZFS is using ~12GB for it's arc cache. Is a 4GB kernel for other stuff normal? It still seems like a lot of memory to me, but I don't know how all the zones affect the amount of memory the kernel needs. -
Hi!
I have Sun Fire 240 with 2Gb of RAM, running two Oracle database instances. Total SGA for these databases are 1.2Gb, PGA consumed at the time of performance degradation (see below) is about 200Mb. Several minutes after successfull startup, OS starts paging at a very high rate (vmstat 1 's pi/po is about several thousands).
# mdb -k
Loading modules: [ unix krtld genunix md ip usba nfs random ipc lofs ptm ]
::memstatPage Summary Pages MB %Tot
Kernel 86992 679 35%
Anon 158841 1240 64%
Exec and libs 1887 14 1%
Page cache 42 0 0%
Free (cachelist) 1631 12 1%
Free (freelist) 90 0 0%
Total 249483 1949For what purpose does kernel allocate 680Mb of memory? Are there any formula to calculate kernel memory requirements?Issue fixed. Kernel memory consumption caused by too much outgoing TCP connection. See http://forum.sun.com/thread.jspa?threadID=26311&tstart=0
-
After iTunes 11.2 upgrade, big CPU and kernel memory usage
The first time I opened iTunes 11.2 after the upgrade, I hit next. I then fought to open Podcasts settings because I had a feeling the delete listened to would be on (it was), then turned it off. It was very difficult to get the iTunes UI to respond. Eventually the whole machine was slowing down, so I had to kill it.
After a reboot, I started iTunes again. This time I didn't even get the UI to come up, just high CPU usage (75-90% by iTunes), and quickly-growing kernel_task memory (> 4-5GB, was around 2GB before starting iTunes).
I can't get the iTunes UI to come up anymore.
Repairing disk permissions didn't help.
I have over a hundred podcast subscriptions, and some of the subscriptions have hundreds of episodes downloaded. I don't want to delete any of that because some of it can't be redownloaded. (Not that I can delete anything right now, as I can't get the iTunes UI to come up!)
Has anyone else seen this?Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
I have 6GB of ram, a fresh install of Windows 7 x64, and the screenshot shows what happens after leaving my PC on for a couple days. (3782+MB being used by modified memory ATM).
http://wow.deconstruct.me/images/ExcessiveMemory.jpg
Any ideas on this?
Edit:
Added this after first round of suggestions
http://wow.deconstruct.me/images/NotSoExcessiveMemory.jpg
This is uptime of around 2 hours.
The first image is of uptime of around 3-5 days.Matthew,
The only reason why these pages are kept on the modified list indefinitely is because the system doesn't have any available pagefile space left. If you increase the size of the pagefile the system will write most of these pages to disk and then move them from the modified list to the standby list. Standby pages are considered part of "available memory", because they can be reused for some other purpose if necessary.
Whether this would "fix" the problem or not depends on what the actual problem is. If it's an unbound memory leak then increasing the size of the pagefile will simply allow the system to run longer before it eventually hits the maximum pagefile size limit, or runs out of disk space. On the other hand, if it's a case of some application allocating a lot of memory and not using it for a long time, then increasing the pagefile might be a perfectly valid solution.
Allowing the system to manage the size of the pagefile actually works well in most cases. Pagefile fragmentation (at the filesystem level) can only occur when the initially chosen size is not large enough and the system has to extend it at run time. For win7 we have telemetry data that shows that even for systems with 1 GB of RAM, less than 0.1% of all boot sessions end up having to extend the pagefile, and this number is even lower for larger amounts of RAM. If you think you are in that 0.1% and your pagefile might be getting fragmented, you can manually increase its minimum size such that the total system commit charge stays below 80% even if you run all your apps at once (80% is the threshold at which the pagefile is automatically extended). This will make sure the pagefile is created once and then stays at the same size forever, so it can't fragment. The maximum size can either be set to the same value as the minimum, or you can make it larger so that the system is more resilient to memory leaks or unexpectedly high loads.
By the way, Windows doesn't use pagefiles as "extra memory", it uses them as a backing store for private pages, just like regular files are used as a backing store for EXEs/DLLs and memory mapped files. So if the system really has more than enough RAM (like in your second screenshot, where you have 3.6 GB of free pages) you shouldn't see any reads from the pagefile. You can verify this by going to the Disk tab in the resource monitor and looking for any disk IO from pagefile.sys. On smaller systems that don't have an excess of free pages you may see periodic reads from the pagefile, and this is expected because the total amount of data referenced by the OS/drivers/processes is larger than the total RAM. Forcefully keeping all pagefile-backed pages in memory (which is what disabling the pagefile does) would simply mean some other pages (memory mapped files, DLL code or data etc) would have to be paged out.
Regarding further troubleshooting steps: If the system runs fine with a larger pagefile (commit charge stabilizes well below 80%, and you no longer see gigabytes of modified pages accumulating in memory) then you don't really need to do anything. If the problem persists, you can check for any processes with an abnormally high commit charge, and also check kernel memory usage in task manager. If it's a kernel leak you can usually narrow it down to a particular driver using poolmon.exe or kernel debugger. -
High memory usage OSX Lion on iMac
Hi,
Recently upgraded 2006 iMac 6.1 to OSX 10.7.2 (4GB). Noticed performance dropped significantly when 2 or more users are logged in especially when switching users. Observed memory usage for OSX Lion is far higher than Snow Leopard! By startup 2GB real memory already allocated and often down to last 500MB. Performance appear to slow down due to swapping as swap i/o appears to increase.
On snow leopard I had 6 users logged in and 4GB was plenty. Lion appears to be a MS product!!!!
Anyone else experienced high memory usage on Lion and any ideas how to reduce memory consumption?
Unfortunately at the maximum memory capacity for my my iMac so need to find ways to reduce memory usage. There must be a kernel compiler option that could reduce memory.....
Also considering SSD drive to speed up swap i/o read/writes.
Otherwise will have to go back to leopard :-(
Thanks for any help in advance.
-Dav
PS> OSX Lion is alot more stable than previous OSX releases with this iMac model. Especially iMacs suffering the notorious NVDIDIA GPU heat problems...You mac can handle up to 3gb of ram, but slightly more will be available with 4gb installed. For Lion to run smooth, a true 4gb of ram is preferred, which may explain the sluggishness of your mac.
-
Sudden high memory usage, can't find cause
I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
total used free shared buffers cached
Mem: 7971 7826 144 0 1 149
-/+ buffers/cache: 7674 296
Swap: 9215 458 8757
It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory! Here's the output of 'top -b -n 1':
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
[2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
[2013-08-03 13:00] [PACMAN] starting full system upgrade
[2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
[2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
[2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
[2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
[2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
[2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
[2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
[2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
[2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
[2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
[2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
[2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
[2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
[2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
[2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
[2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
[2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
[2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
[2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
[2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
[2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
[2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
[2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
[2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
[2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
[2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
[2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
[2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
[2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
[2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
[2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
[2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
[2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
[2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
[2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
[2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
[2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
[2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
[2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
[2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
[2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
[2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
[2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
[2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
[2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
[2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
[2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
[2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
[2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
[2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
[2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
[2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
[2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
[2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
[2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
[2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
[2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
[2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
[2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
[2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
[2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
[2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
[2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
[2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
[2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
[2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
[2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
[2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
[2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
[2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
[2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
[2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
[2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
[2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
[2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
[2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
[2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
[2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
[2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
Last edited by Chaotechnician (2013-08-08 00:10:43) -
How to get less memory usage and cpu usage in an old pc with arch?
hi, i installed archlinux sucessfully after some problems.
but the system use a lot of memory (free said me 184mb) only with irssi, finch, mp3blaster and midori opened and is "slower" than when i used slitaz linux in it, why?
well, the things that i installed in arch are:
xorg + xf86-video-intel
jwm
irssi, finch, mp3blaster, htop.
midori, opera, elinks, links-g, epiphany.
geany, leafpad, go-openoffice, djview4, gnumeric, epdfview
isomaster, inkscape, gpicview, cdrkit, mtpaint.
pcmanfm, emelfm2, hal.
octave, mathematica5, R, wxmaxima,gnuplot.
nrg2iso, lxsplit, dclock.
here is a screenshot:
the pc have this skills:
800mhz celeron 370
MB gygabite gaw-mm7
192mb ram pc100
30 GB HD ide 5400 rpm
some code now:
lshw -businfo
WARNING: you should run this program as super-user.
Bus info Device Class Description
=================================================
system Computer
bus Motherboard
memory 183MiB System memory
cpu@0 processor Celeron (Coppermine)
memory 32KiB L1 cache
memory 128KiB L2 cache
pci@0000:00:00.0 bridge 82810 GMCH (Graphics Memory Controller Hub)
pci@0000:00:01.0 display 82810 (CGC) Chipset Graphics Controller
pci@0000:00:1e.0 bridge 82801AA PCI Bridge
pci@0000:01:03.0 eth0 network IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
pci@0000:00:1f.0 bridge 82801AA ISA Bridge (LPC)
pci@0000:00:1f.1 storage 82801AA IDE Controller
pci@0000:00:1f.2 bus 82801AA USB Controller
pci@0000:00:1f.3 bus 82801AA SMBus Controller
pci@0000:00:1f.5 multimedia 82801AA AC'97 Audio Controller
lspci -v
00:00.0 Host bridge: Intel Corporation 82810 GMCH (Graphics Memory Controller Hub) (rev 03)
Subsystem: Intel Corporation 82810 GMCH (Graphics Memory Controller Hub)
Flags: bus master, fast devsel, latency 0
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 VGA compatible controller: Intel Corporation 82810 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 0200
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Memory at ee000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e7e00000-ebefffff
Prefetchable memory behind bridge: dfc00000-dfcfffff
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE Controller
Flags: bus master, medium devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at ff00 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, piix
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801AA USB Controller
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at da00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
Subsystem: Intel Corporation 82801AA SMBus Controller
Flags: medium devsel, IRQ 10
I/O ports at 04c0 [size=16]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
Subsystem: Giga-byte Technology Device 2000
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at de00 [size=256]
I/O ports at dc00 [size=64]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
01:03.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Subsystem: Sundance Technology Inc / IC Plus Corp Device 0201
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at cc00 [size=128]
Memory at e8000000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at dfc00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sundance
Kernel modules: sundance
lsmod
snd_ac97_codec 85937 1 snd_intel8x0
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33693 0
ac97_bus 750 1 snd_ac97_codec
snd_mixer_oss 14810 1 snd_pcm_oss
snd_pcm 57479 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
sundance 15991 0
uhci_hcd 19124 0
snd 43847 9 snd_seq_oss,snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
mii 3218 1 sundance
ppdev 4882 0
i2c_i801 7122 0
soundcore 5007 1 snd
iTCO_wdt 7577 0
ehci_hcd 31594 0
lp 6616 0
sr_mod 13161 0
analog 7939 0
psmouse 56309 0
ns558 1931 0
parport_pc 27680 1
shpchp 26592 0
intel_agp 23225 1
button 3638 0
thermal 9326 0
processor 26494 1
snd_page_alloc 5809 2 snd_intel8x0,snd_pcm
iTCO_vendor_support 1453 1 iTCO_wdt
gameport 7130 3 analog,ns558
parport 26575 3 ppdev,lp,parport_pc
pcspkr 1347 0
usbcore 118921 3 uhci_hcd,ehci_hcd
serio_raw 3620 0
evdev 6970 8
i2c_core 15369 1 i2c_i801
cdrom 31625 1 sr_mod
pci_hotplug 23492 1 shpchp
agpgart 23331 2 intel_agp
sg 21079 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext2 56463 1
mbcache 4278 1 ext2
sd_mod 24101 3
pata_acpi 2264 0
ata_generic 2235 0
ata_piix 17725 2
libata 135579 3 pata_acpi,ata_generic,ata_piix
floppy 47412 0
scsi_mod 78933 4 sr_mod,sg,sd_mod,libata
i've read i can disable the kernel modules that i don't need to improve the memory usage.
which modules i can disable without "kill my system"?. i don't want SATA, DVD, bluray, infrared, floppys, bluetooth, usb3.0, 3d video card, dial-up-integrated modem, ntfs, 'cause mi old is so old. i want it only for the university.
thanks in advantage for the tips, and sorry if someone can't understand very well that i wanna tell you, english isn't my "mother languaje".thanks for the answers. yes, i have a 1 gb of swap.
i think i can reduce the memory usage of the system if i dissable the kernel modules that i don't use. but, the question is: what modules is safe to disable to get it?
thanks in advantage -
OS X Yosemite Safari memory usage
Safari's memory usage under Yosemite continues to increase until system stalls due to paging. The memory gets to about 60G before the stall. Also, the process SafariDAVclient exhibits the same behavior. This started after I reinstalled Yosemite. Reinstalled again, no better.
Anyone have a solution?
IMAC
12G 1333 MHz DDR3
Inter Core I5Start time: 18:40:57 12/14/14
Model Identifier: iMac12,2
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 5 minutes
SATA
ST31000528AS
USB
UC-10KM V1.3.124 (ATEN International Co. Ltd.)
IEEE-1284 Controller (Prolific Technology, Inc.)
Diagnostic reports
2014-12-08 Norton AntiVirus crash
2014-12-08 Norton Internet Security crash
Shutdowns
Dec 12 15:34:53 Previous shutdown cause: -62
Dec 12 16:34:52 Previous shutdown cause: -62
Dec 13 02:40:04 Previous shutdown cause: -62
Dec 13 11:35:09 Previous shutdown cause: -62
Dec 14 18:36:37 Previous shutdown cause: -62
Log
Dec 14 05:36:19 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 05:38:34 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 07:36:20 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 07:38:39 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 09:36:58 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 09:38:27 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 10:45:35 firefox (map: 0xffffff8046cfb000) triggered DYLD shared region unnest for map: 0xffffff8046cfb000, region 0x7fff89600000->0x7fff89800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 14 11:09:09 process com.apple.WebKit[3678] thread 910877 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
Dec 14 11:35:53 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 11:38:36 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 13:12:12 firefox (map: 0xffffff8051eab690) triggered DYLD shared region unnest for map: 0xffffff8051eab690, region 0x7fff89600000->0x7fff89800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 14 13:39:50 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 13:41:29 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 15:18:00 firefox (map: 0xffffff8051826000) triggered DYLD shared region unnest for map: 0xffffff8051826000, region 0x7fff89600000->0x7fff89800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 14 15:35:46 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 15:38:35 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 17:42:52 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Dec 14 17:44:01 com.symantec.errorreporting.periodic: Service exited with abnormal code: 70
Dec 14 18:36:37 Error 2 registering socket filter (com.symantec.fw.ac.at). Your computer may not be fully protected.
Dec 14 18:36:37 com.apple.Kerberos.kdc: Service exited with abnormal code: 1
Dec 14 18:36:37 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
Dec 14 18:36:54 com.apple.dpd: Service exited with abnormal code: 75
Dec 14 18:37:05 com.apple.dpd: Service exited with abnormal code: 75
Dec 14 18:37:21 firefox (map: 0xffffff8049a89c30) triggered DYLD shared region unnest for map: 0xffffff8049a89c30, region 0x7fff86c00000->0x7fff86e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 14 18:40:13 com.symantec.errorreporting.periodic-agent: Service exited with abnormal code: 70
Activity
CPU: user 13%, system 38%
CPU per process: SafariDAVClient (UID 501) is using 97 %
Memory: Safari (UID 501) is using 1753 MB
kexts
com.symantec.kext.internetSecurity (5.4f4)
com.symantec.kext.pf (5.7.1f4)
com.symantec.kext.ips (3.9.2f1)
com.symantec.kext.SymAPComm (12.7.1f4)
com.symantec.kext.fw (5.3.1f4)
Daemons
com.period.searchprotectd
com.carbonite.daemon
com.symantec.liveupdate.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.symantec.errorreporting.periodic
com.oracle.java.Helper-Tool
com.symantec.symdaemon
com.symantec.sharedsettings
com.adobe.fpsaud
com.symantec.liveupdate.daemon.ondemand
com.symantec.deepsight-extractor
Agents
com.symantec.uiagent.application
com.carbonite.carbonitestatus
com.symantec.nis.application
com.oracle.java.Java-Updater
com.apple.AirPortBaseStationAgent
com.carbonite.carbonitealerts
com.symantec.errorreporting.periodic-agent
Bundles
/Library/Extensions/FileSecurity.kext
- com.symantec.kext.filesecurity
/Library/Extensions/SymAPComm.kext
- com.symantec.kext.SymAPComm
/Library/Extensions/SymFirewall.kext
- com.symantec.kext.fw
/Library/Extensions/SymInternetSecurity.kext
- com.symantec.kext.internetSecurity
/Library/Extensions/SymIPS.kext
- com.symantec.kext.ips
/Library/Extensions/SymPersonalFirewall.kext
- com.symantec.kext.pf
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/NortonInternetSecurityBF.plugin
- com.symantec.NortonInternetSecurityBF
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/SymantecQuickMenu.prefPane
- com.symantec.quickmenu.prefpane
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/TroviNPAPIPlugin.plugin
- com.conduit.ConduitNPAPIPlugin
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 2888270030)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>14</integer>
<key>Minute</key>
<integer>2</integer>
<key>Weekday</key>
<integer>1</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.symantec.errorreporter-periodicagent.plist (checksum 3538970707)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.symantec.errorreporting.periodic-agent</string>
<key>Nice</key>
<integer>10</integer>
<key>LowPriorityIO</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>86400</integer>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Minute</key>
<integer>48</integer>
<key>Hour</key>
<integer>16</integer>
<key>Weekday</key>
<integer>2</integer>
...and 28 more line(s)
Contents of /Library/LaunchAgents/com.symantec.nis.application.plist (checksum 4000086316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.symantec.nis.application</string>
<key>RunAtLoad</key>
<false/>
<key>QueueDirectories</key>
<array>
<string>/Library/Application Support/Symantec/NisLaunch</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Applications/Symantec Solutions/Norton Internet Security.app/Contents/MacOS/Norton Internet Security</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.symantec.uiagent.application.plist (checksum 2715641560)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.symantec.uiagent.application</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Symantec/SymUIAgent/SymUIAgent.app/Contents/MacOS/SymUIAgent</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.perion.searchprotectd.plist (checksum 1209345832)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/SearchProtect/SearchProtect.app/Contents/MacOS/SearchProt ect</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.period.searchprotectd</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.symantec.deepsight-extractor.plist (checksum 27990138)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.symantec.deepsight-extractor</string>
<key>OnDemand</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>NetworkState</key>
<true/>
</dict>
<key>RunAtLoad</key>
<true/>
<key>LowPriorityIO</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StandardErrorPath</key>
<string>/Library/Application Support/Symantec/DeepSight/errors.log</string>
...and 13 more line(s)
Contents of /Library/LaunchDaemons/com.symantec.errorreporter-periodic.plist (checksum 4116421858)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.symantec.errorreporting.periodic</string>
<key>Nice</key>
<integer>10</integer>
<key>LowPriorityIO</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>StartInterval</key>
<integer>43200</integer>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Minute</key>
<integer>48</integer>
<key>Hour</key>
<integer>12</integer>
<key>Weekday</key>
<integer>2</integer>
...and 30 more line(s)
Contents of /Library/LaunchDaemons/com.symantec.liveupdate.daemon.ondemand.plist (checksum 2394746304)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.symantec.liveupdate.daemon.ondemand</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Symantec/LiveUpdate/LiveUpdateDaemon.bundle/Contents/MacOS/LiveUpdateDa emon</string>
</array>
<key>TimeOut</key>
<integer>15</integer>
<key>Sockets</key>
<dict>
<key>DaemonSocket</key>
<dict>
<key>SockPathMode</key>
<integer>49663</integer>
<key>SockPathName</key>
<string>/private/tmp/com.symantec.liveupdate.daemonport</string>
</dict>
</dict>
<key>EnableTransactions</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.symantec.liveupdate.daemon.plist (checksum 4073930787)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.symantec.liveupdate.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Symantec/LiveUpdate/LUTool</string>
</array>
<key>StartInterval</key>
<integer>7200</integer>
<key>TimeOut</key>
<integer>15</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.symantec.nav.migrateqtf.plist (checksum 1567806071)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.symantec.nav.migrateqtf</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/MigrateQTF</string>
</array>
<key>StartInterval</key>
<integer>300</integer>
<key>TimeOut</key>
<integer>15</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.symantec.sharedsettings.plist (checksum 2142494329)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.symantec.sharedsettings</string>
<key>MachServices</key>
<dict>
<key>com.symantec.sharedsettings</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivateFrameworks/SymSharedSettings.framework/Tools/SymSharedS ettingsd</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.symantec.symdaemon.plist (checksum 513030552)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.symantec.symdaemon</string>
<key>OnDemand</key>
<false/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Symantec/Daemon/SymDaemon.bundle/Contents/MacOS/SymDaemon</string>
</array>
</dict>
</plist>
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Restricted files: 406
Elapsed time (s): 207 -
Hey Guys, I been having problems with my mac. I'm running 10.8.5 on my 2008 Power mac tower and recently I have been having problems with my mac
going real slow. I opened Activity Monitor and Noticed something called "Installer" and it was using 90% of my memory and the only thing I can do is quit the process. Does anyone know why this is happening?I ran EtreCheck and i'll post my results. I will add more ram after I fix the problem, and adding an SSD is a good option. I thought about it but
I was holding off because I was thinking of buying a new computer. I will try to keep my sysstem drive clean in the future. After Linc Davis posted about the Trojan i'm planning of doing that. I have a cloned mac drive, I updated the other day using SuperDuper.
My EtreCheck info
Problem description:
“Installer” app is running using High Memory Usage.
EtreCheck version: 2.0.11 (98)
Report generated November 14, 2014 2:06:44 PM PST
Hardware Information: ℹ️
Mac Pro (Early 2008) (Verified)
Mac Pro - model: MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU: 8-core
8 GB RAM
DIMM Riser B/DIMM 1
empty empty empty empty
DIMM Riser B/DIMM 2
empty empty empty empty
DIMM Riser A/DIMM 1
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
empty empty empty empty
DIMM Riser A/DIMM 4
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Video Information: ℹ️
ATI Radeon HD 2600 - VRAM: 256 MB
HP 2509 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:11:2
Disk Information: ℹ️
WDC WD1001FALS-00J7B0 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Hard Drive (disk0s2) / [Startup]: 999.35 GB (456.96 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
WDC WD10EACS-00D6B0 disk1 : (1 TB)
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 210 MB
Media Drive (disk1s2) /Volumes/Media Drive : 999.86 GB (30.09 GB free)
WDC WD3200AAJS-41VWA0 disk2 : (320.07 GB)
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 210 MB
Archive Drive (disk2s2) /Volumes/Archive Drive : 319.73 GB (58.25 GB free)
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Seagate Backup+ Desk 3 TB
S.M.A.R.T. Status: Verified
disk4s1 (disk4s1) <not mounted> : 315 MB
Seagate (disk4s2) /Volumes/Seagate : 3.00 TB (2.41 TB free)
Apple Inc. Bluetooth USB Host Controller
Tablet PTK-640
Firewire Information: ℹ️
WD Passport III 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk5s1 (disk5s1) <not mounted> : 32 KB
GRPHX Drive 2 (disk5s3) /Volumes/GRPHX Drive 2 : 499.97 GB (126.10 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4216 - SDK 10.8) Support
[loaded] com.sophos.kext.sav (9.2.0 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.0 - SDK 10.8) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.bjango.istatmenusagent.plist Support
[running] com.bjango.istatmenusnotifications.plist Support
[running] com.extensis.FMCore.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.wacom.wacomtablet.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[running] com.crashplan.engine.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.quark.quarkupdate.plist Support
[running] com.sophos.common.servicemanager.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.redgiantsoftware.updater.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
CrashPlan menu bar UNKNOWN (missing value)
Spotify Application (/Applications/Spotify.app)
CrashPlan menu bar Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.1 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ℹ️
1Password
Searchme
Slick Savings
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Quark Update Preferences Support
WacomTablet Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
46% Installer
1% WindowServer
1% SystemUIServer
1% Google Chrome
1% ps
Top Processes by Memory: ℹ️
5.43 GB Installer
198 MB Mail
163 MB InterCheck
163 MB SophosScanD
137 MB SophosAntiVirus
Virtual Memory Information: ℹ️
7 MB Free RAM
3.95 GB Active RAM
3.95 GB Inactive RAM
676 MB Wired RAM
488 MB Page-ins
309 MB Page-outs -
Is there a tool like McDougal's prtmem that will show accruate (or more accruate) memory usage then vmstat's freemem will show?
tzzhc4 wrote:
prtmem was part of the MEMTOOLS package you just listed, I belive it relies on a kernel module in that package and doesn't work on any of the newer kernel revisions.But it certainly works on 8, right? And that's the OS you were referring to, so I assumed you were thinking of something else.
From that page:
System Requirements: SPARC/Solaris 2.6
SPARC/Solaris 7
SPARC/Solaris 8
SPARC/Solaris 9
x86 /Solaris 8
x86 /Solaris 9
So if that's what you want to use, go for it!
I thought freemem didn't include pages that had an identity, so there could be more memory free then was actually listed in freemem.What do you mean by 'identity'? Most pages are either allocated/reserved by a process (in use) or used by the disk cache. Under Solaris 7 and earlier, both reduced the 'freemem' number. Under 8 and later, only the first one does.
Darren -
Withdraw permission allowing you to monitor memory usage
I now often have to either force quit, reboot and have started having kernel "panics" since I agreed to allow Firefox monitor CPU usage. I am still running OS X 10.6.8 on my Mac's. I have had no problems with anything since installing that OS X.
However, from time to time with the latest install of Firefox 7.0.1 I find that the program and/or my computer "locks" up and appears unresponsive. I left Firefox active and resident on my computer last night and again everything will non-responsive. I opened activity monitor and noticed that Firefox was consuming 283 MB of real memory (at present 298.6 MB) and I have this an an other tab for the Seattle Times open. I withdraw my permission to allow Firefox to monitor my memory usage and need to know how to remove the cookie or what ever governs that)Come on Firefox! Since your upgrades starting with FF4, Firefox has been acting like garage. It locks up constantly and I find myself having to use FF3.6.23 just to get my work done.
The most frustrating thing is we never hear from you. We don't know if you hear us, if you're working on it, or if you just plain don't care! I've been reacquainting myself with Safari and Google Chrome just in case I get so fed up I can't take it any more.
I believe you're monitoring mine also.
I'm on a March 2007 Mac Book Pro using OSX 10.6.8 -
Photoshop memory usage extremely high
I opened a clean Photoshop, then opened and viewed about 6-8 PSD files (each one no bigger than 200mb) individually, not all at once. Then with all PSDs closed and Photoshop "empty" I began working in other programs and noticed my computer acting really slow at times. I then noticed that Photoshop was using 12gigs of memory sitting there doing nothing? This happens a lot...I'm done with Photoshop, but Photoshop is not done with memory usage. Really annoying having to close Photoshop after every use just to clean out it's memory hold.
I'm using Photoshop CC 2014.I've tried purging clipboard and even have deleted all the contents of my Win7 %temp% folder... Photoshop still hogs big amounts of memory.
here is more system info if this helps:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16180 MB
Free memory: 7391 MB
Memory available to Photoshop: 14481 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro K2000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.1166"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro K2000/PCIe/SSE2"
glgpu[0].GLRendererID=4094
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20130514000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro K2000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="311.66"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="4.2.1"
clgpu[0].CLBandwidth=5.01167e+010
clgpu[0].CLCompute=192.569
License Type: Subscription
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\billw\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 921.7G, 377.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Libraries
Adobe Color Themes
Installed TWAIN devices: NONE -
Kernel CPU usage ad 250% on Idle MacBook Pro 13"
I recently (August 2011) purchased a MacBook Pro 13", 4 GB Ram, Intel i5, 320GB HDD. This is my first MAC and I was pretty excited.
However after using it for a few months one issue is constantly bothering me.
When I start up my MAC the fan starts making loud noises. This happens 75% of the time. AT first I thought that it would go away and went aboyt my work. Slowly I realized the the MAC was actually very slow and the fan noise never subsided. When it does the MAC works like a charm.
I checked the memory usage in the Activity Monitor and found it to be healthy. At this moment with a Browser (chrome) and Finder opened it has 2.6 GB of free memory. However the CPU usage is very surprising. Just one process, which is teh kernel task is hogging everything and is at 250% consistently. WHen it does come down (sometimes when I am lucky) the fan noise also subsides.
Has anyone faced this issue? Or am I just one of those unlucky people who got a bad MAC.
Any help/pointers etc appreciated. I dont want to be disappointed with my MAC experience.
ThanksPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal. -
Problem with Firefox and very heavy memory usage
For several releases now, Firefox has been particularly heavy on memory usage. With its most recent version, with a single browser instance and only one tab, Firefox consumes more memory that any other application running on my Windows PC. The memory footprint grows significantly as I open additional tabs, getting to almost 1GB when there are 7 or 8 tabs open. This is as true with no extensions or pluggins, and with the usual set, (firebug, fire cookie, fireshot, XMarks). Right now, with 2 tabs, the memory is at 217,128K and climbing, CPU is between 0.2 and 1.5%.
I have read dozens of threads providing "helpful" suggestions, and tried any that seem reasonable. But like most others who experience Firebug's memory problems, none address the issue.
Firefox is an excellent tool for web developers, and I rely on it heavily, but have now resorted to using Chrome as the default and only open Firefox when I must, in order to test or debug a page.
Is there no hope of resolving this problem? So far, from responses to other similar threads, the response has been to deny any responsibility and blame extensions and/or pluggins. This is not helpful and not accurate. Will Firefox accept ownership for this problem and try to address it properly, or must we continue to suffer for your failings?55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.
Maybe you are looking for
-
Hi Gurus, is der any way to download data from ALV report to excel sheet depending on layout set dyanmically. I mean to say that if I choose a layout then data has to transfer to excel sheet according to layout fields automaticaly.
-
Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBoo
-
hi gurus, i have a requirnment wherein i need to calculate wtd.average days..for tis i need to subtract current day - net due date which are chars..how can i achieve tis..have sap exit for current day but how do i use it....help will be appreciated t
-
How to render multiple lines of text?
Hi, I have a string variable in a backing bean,which holds multiple lines of text with newline character as the seperator. I have to display it in my jspx page. Which component is suggestable? Thanks, Lokesh.
-
Premiere Pro CC 2014.2 and AVCHD audio bug
The AVCHD audio is mangled by Premiere. Details below. I recorded a 2 act play and I'm editing it in Premiere. Each act is about 1 hour so the camera recorded spanning MTS files. Act 1 imported perfectly. No problem. When importing act 2, I noticed s