Kernel Panics at Startup. HELP PLEASE!
Hi,
My recently bought 17 inch, 1.83 GHz Intel Core 2 Duo iMac started to show an erratic behavior, At startup it loads great the nice chime and everything, but, as soon as the Apple logo appears the Kernel Panic window pops up. It has appeared in all of the startups.
Yes, SMU, PRAM, both done without success, and I actually booted from the Mac OS X cd and worked. I dont know what happened since its not used by me, I have my MacBook and the iMac is for my sister and my mom, no idea if they did something bad to it (if they did they probably didint know since they are newbies to mac). My guess is I have to re-install the software but they will loose their 5000+ photos so...
This has never happened to me in my several years of joy with mac, so i guess one of you geniuses has the solution to these.
Any help is appreciated, thanks in advance
-Victor
If your sure that you followed the instructions from the Testing and repairing your startup disk link I gave above.
1. Start up your computer using another disk.
To use the Install Mac OS X disc, insert the disc and restart your computer holding down the Option key, then select the Install Mac OS X disc and click the arrow.
2. Open Disk Utility.
In the Mac OS X Installer, choose Utilities > Open Disk Utility.
3. Select the startup disk you want to repair in the list of disks and volumes, then click First Aid.
4. Click the button to verify or repair the disk or disk permissions.
The ram would be the next thing to check. Slide them gently in untill you feel them stop, then push hard with your thumbs untill you feel them click or seat into place. You will know by the feel when they are seated correctly!
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano
Similar Messages
-
Kernel panic at startup - Help
Dear All,
Yesterday my wifes imac (Bought in 2007, running SL)started to "Crash" Safari, and firefox were freezing and then the problem expanded to other programs like itunes. So this is what I did.
1. copied all music and pictures to an external drive
2. Used the installation disk to restore a backup from time machine
3. Left it overnight
4. This morning the Imac said restore successful please restart
5. I did and then I got this grey screen with a picture of the power button on it telling me in lots of different languages to press the power button and restart.
6. I have done this about ten times now and it just keeps coming back
Can anyone help. I am running the Imac with a bluetooth keyboard but do have access to a wired one. No idea if that makes a difference just thought I would mention it.
Thanks
JshThe message you see is a kernel panic message. See Mac OS X 10.6 Help: If “You need to restart your computer” appears for steps you can try to resolve its cause.
BTW, to eject a disc, hold down the main mouse button or the eject key on the keyboard during startup. This should work even with Apple-branded wireless ones; if not even a bargain priced USB wired mouse should. -
Kernel panic occurred on startup last week. Since then have tried the following-
Removed all periferals apart from Apple keyboard and mouse.
Tried each of the 512Mb ram chips on their own.
Booted from and ran successfully-
DiskWarrior - clear
System Disc, Disc Utilities - clear
Tech Tool Pro - clear
Apple Hardware test - clear
Ran Memtest on ram, came out OK
Wrote zeros to hard disc then installed a new OSX 10.4.6. Still get kernel panic on startup.
Checked LED's on logic board while starting up from internal start button. 3 light up before kernel panic. Not sure if this test indicates good logic board, power supply or not?
Can boot OK in safe boot mode. Again should that indicate logic board and hard disc OK?
Help?If all three of the LEDs light up, that means that power is getting to the places it should, but even if the logic board is getting power, that doesn't mean that it is functioning properly. You have performed all the tests you can (thanks for listing them) and nothing shows up. Call Apple and make an appointment to take it in and have a genius look at it, or, if you have Apple Care, call them and see what they suggest.
-
10.6.8 kernel panic at startup (fixed)
**excuse my english since I'm french**
Like a lot of people, I've installed 10.6.8 through software update. And I've experimented kernel panic at startup. So, I unplugged everything (my two USB hubs with multiple peripherals) except the original Apple keyboard and Apple wired mouse. And restarted in safe mode. Downloaded Apple 10.6.8 combo update, install it and restart. Everything went fine. Great.
But as soon as I plugged back my USB hub, kaboom! here's come the Kernel Panic again.
So, one by one, I plug and unplug my peripherals. To discover that my old optical wired two button mouse (love that mouse ;-))) was THE problem. Even when it's plugged directly in one of the USB port on my Mac Pro. I've try with three different optical USB wired mouse, one Logitech, one Dell and one Verbatim (my old mouse): kaboom! Kernel Panic. With my Microsoft optical wireless mouse? No kernel panic. 10.6.8 crashes only with third partys wired mouses, except the Mac wired mouse.
Voilà.
So, I'm stuck with the old wired Apple Mouse (that I hate). But no more kernel panic.
Hope my story can help someone.
And Apple, I missed my optical two buttons wired mouse. ;-))I have the same problem, but only on one of the two iMacs that I updated to 10.6.8.
The first installation went smoothly, and I haven't had any trouble with the mouse or anything else on that iMac. A Samsung color laser printed continues to work just fine.
The second installation seemed to have a hiccup -- after I had authorized the update there was a second update screen. That sequence finished with a kernel panic, which continued through several attempts until I unplugged the Logitech laser mouse.
That Logitech mouse works perfectly on the first updated iMac, and the other Logitech mouse from that computer causes a kernel panic on the troublesome iMac.
I'm now using an Apple bluetooth mouse, which I'm getting used to - but I would still prefer the option of my good old Logitech mouse.
Another problem is that I can't print to a networked Konica-Minolta bizhub C451. Tried the combo 10.6.8 updater and reinstalled the Konica driver -- but still no dice. -
Can't get past kernel panics on startup
Like the title says, I'm unable to get past kernel panics on startup. I know next to nothing about the technical side of computers, so I'll just explain the whole process of what I've gone through. Earlier today I got a kernel panic after waking my computer from sleep. I restarted and everything was fine. I probably should have looked in to the cause of the panic, but I just went on using the computer as normal. Later, I returned to the computer, woke it from sleep, and got another kernel panic. I restarted, and my computer got to the Apple logo and gray spinning wheel when it froze. No kernel panic, just a frozen wheel. So I shut it down, restarted it again, and this time I got to just a gray screen (I don't remember if the Apple logo had shown up or not, but there was no spinning wheel). It hung on that screen for a while, then the fans started running like they were trying to take off a jet engine, so I shut it down. I tried restarting it once more, and it got to the spinning wheel screen when another kernel panic happened. I restarted the computer, and tried this a few more times, getting kernel panics each time. So I let it rest. A few minutes later I tried it again. This time it got even further, and I was pretty hopeful that I'd at least get the computer running again. It got past the gray spinning wheel, to the blue screen that usually shows up before the "cosmic wallpaper" and login screen. At that point it hung on that blue screen, and the jet engine sound started up. Now I take out my 10.5 instal disc. I back up with Time Machine, so I'm just going to hope reinstalling and restoring from Time Machine works out. I stick in my 10.5 disc, hold down the 'c' key and start up the iMac. Eventually it gets to the spinning wheel screen and a kernel panic. That's where I am now. Any help? I have a big paper due on Tuesday, so there's a ticking clock.
Thanks a lot
MikeHi - I have a similar problem here, running snow leopard 10.6. I am also not technical.
I went out & left my mac on, and when I got home it had switched itself off and on restart I got to the grey screen + Apple icon. Unfortunately I have never backed up my data!! Tried starting in safe mode (holding Shift key) and get the following message every time I try this:
panic (cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"APCI\".n" e/SourceCache/xnu/xnu_1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called:<panic>
Backtrace (CPU0),Frame : Return Address (4 potential args on stack)
BDS process name corresponding to current thread: Unknown
Mac OS version: Not yet set
Kernel Version: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root: xnu-1504.9.37~1/RELEASE_I386
I have tried booting from the Leopard disc but can't do a repair as it doesn't seem that it can find the Mac hard disc. Have also tried starting holding the <option> key and get a Hardisc icon displayed with an arrow beneath, and when clicked a progress bar appears for maybe 30 seconds, then disappears & it just carries on in grey screen mode with spinning wheet & Apple icon.
I want to know if I just have to concede that I have lost my data and need to reinstall the OS, or it could be worth taking to a Mac repair agent to try to retrieve it -
I'm getting a kernel panic on startup after restore hd
Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to reboot and it kept shutting down when reaching grey screen. (I orginally had leopard and upgraded to snow leopard) got my OSX (leopard) install cd and booted to disc, disk utilities and check disc...originally would only let me verify, which failed, then unmounted and was able to get repair disc...unable to repair. I erased hd and then restored from my time machine backup, now when I boot I get kernel panic on startup. I'm running of external hd which I formatted and installed leopard essential software. So my question is, is my HD shot? Are there other step I can take? I can't afford to bring this in to someone. This is most of what my screen says when I boot:
Panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@/SourceCache/xnu/xnu-1504 . 15 . 3/bsd/kern/kern_exec.c.3145
Debugger called: <painic>
Backtrace (cpu1), Frame : Return Address (4 potential args on stack)
and the a list of numbers....
any and all help would be appreciated to help me resolve thisBump, can anyone help?
-
Constant Kernel Panics on startup on 10.4.7
I had no problems after upgrading to 10.4.7 on my Titanium iBook so I upgraded on my G4 iMac desktop as well.
I had one successful restart under 10.4.7, but on all subsequent attempts, I've gotten kernel panics on startup. with a screen and a half of backtrade and exception state lines, filled with hexadecimal codes.?
Anyone else had this problem? Any suggestions as for how best to deal with it?
P.S. I did make a bootable backup of my disk before upgrading, and my first thought is that I should just restore back to 10.4.6 from the backup. The problem, however, is that the backup is on a firewire drive, and I can't figure out how to make the machine boot from the backup. Is there a simple 'button' trick I can use to make it boot from the firewire drive instead of from the internal HD? (Alternately, is there a way I can get my machine to recognize the Firewire drive from system 9.2.2. I have been able to contrive a way to reboot from the internal drive's 9.2.2. folder... but I can't see the firewire drives from it).OK: Here's a follow-up:
I tried using the Startup Manager and, to my surprise, that didn't seem to help. It still wasn't recognizing my firewire drive backups as volumes.
I then went to Dr. Smoke's diagnostic list and looked through it. The first step that seemed both relevant and possible to my situation was the suggestion (through a link to a help page) that I reset my PRAM and DVRAM.
So, I went ahead and tried rebooting (in OS X) while holding down option-command-p-r, and the machine booted fine. No kernel panic at all.
I decided to try immediately rebooting into OS-X as per 'normal' (i.e. without holding down option-command-p-r). The kernel panic recurred. Several attempts at rebooting revealed the following: (1) Wiith each attempt to reboot off 10.4.7 on the hard drive while holding down option-command-p-r, I had no problems. (2) With each attempt to reboot from 10.4.7 on the hard drive without holding down option-command-p-r, I got a kernel panic. Hmm.... (That seems significant, but what exactly it means, I don't know.)
I did find out that, if I held down option-command-p-r while rebooting, I was able to boot successfully into 10.4.7 from the hard drive, and that from there, I was able to reboot into with no problem into 10.4.6 from my backup firewire drive (even if I didn't hold down option-command-p-r).
At this point, I'm planning just to restore 10.4.6 to my internal hard drive from my backup, and hope that works. (I'll post and let you know if it does.) However, if the information presented above suggests anything to anyone (e.g. about more specific problems that I should investigate, perhaps with the RAM, I'd be most appreciative to hear your thoughts.). -
Early 2006 iMac Kernel Panics on startup
We have recently purchased a second hand 20" iMac, and after a few days it has started to kernel panic on startup, before the Apple logo disappears. A whirring when it begins to turn on has also appeared.
I shall photograph the kernel panic message if it helps. The local Apple Store have suggested that since there is a greater time period before the Apple Logo appears, the fault might be something to do with the motherboard/hard drive. Are there any suggestions here which may help us?
Thank you.KimGale wrote:
The kernel panic occurs before I can log in.
here's some to read up on:
_*Resolving Kernel Panics*_ and here _*http://support.apple.com/kb/HT2546*_.
for OS X 10.6 specifically, see this: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html.
also
_*What is a kernel panic*_,
_*Technical Note TN2063: Understanding and Debugging Kernel Panics*_,
_*Mac OS X Kernel Panic FAQ*_,
and
_*Tutorial: Avoiding and eliminating Kernel panics*_
The disk is in there, and now we can't get it out
FWIW,
Kappy wrote:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
JGG -
Kernel panic at startup and impossible to reinstall SL
Hi
I've recently bought the new iMac with SSD.
I've upgraded the Ram, adding 8go Crucial to the 4go existing.
The first time, I started very well, very quickly.
After that, I installed W7 on my bootcamp partition. It went very fine also.
After having installed W7, I booted on the Mac OS X partition. This was the first time I've got a kernel panic at startup.
Fine, I thought it was a mismanipulation when I installed W7. So, I wanted to reinstall SL.
I tried, 2 or 3 times, but I've always had this message while installing "The installer could not copy the necessary support files".
I managed to boot Mac OS in Safe Mode. I tried to installed SL directly from the Safe Mode, and I got another error : "Impossible to read the installation disk".
So I tried to make a UBS Stick bootable image of the SL installation disk : I cannot mount it "checksum error".
I hardly think now that the problem is coming from the RAM, but instead from the SL disk.
The installation disk is new, it was the first time I was using it.
Now, I am able again to boot from the mac os partition without having chaned anythink, but having booted once in safe mo
Guys, could you help my with that ? How can I get a new disk ? How can I be sure that the RAM is OK (W7 is working fine and SL also right now).
Thanks in advanceSorry misunderstanding, my bad. By new I meant never used before.
It is the brand new iMac 27" SSD. So it supports up to 16GB of RAM.
I am also sure of the model of RAM I ordered.
I wanted to remove the new intalled RAM, however, I can't : it's way to hard. When I pull the tab, I just slip.
I can boot to the Install DVD (So, SL 10.6.8). I can go up to the beginning of the installation. It evens begins to copy files, and I always get the error at the same moment.
The same thing happens when I try to install SL from the Safe Mode of my existing OS. It begins to copy file until I get "unable to read the disk, bla bla".
I hope it was only a minor disk corruption, but I would like to be sure. How can I test the RAM and the Installation Disk ?
I tried to make an image of the installation disk, but when I try to mount the compressed image, I get a checksum error...
thanks again for your help -
DVD drive broken, Mac G5 having kernel panics at startup
After nearly 5 years of steady, trouble free use, my G5 iMac started acting up a few days ago. I get what I think are kernel panics at startup. I am usually able to get it running after a few restarts but I am worried. My DVD drive became unreliable a month after my 1 year warranty expired. For some reason it won't start up with the install disks that came with the cpu but will bootup from my DiskWarrior DVD. I tried rebuilding the directory with DiskWarrior but I got the blue screen when it was almost finished. I've decided to do and Archive and install because I'm sure my problem stems from programs I installed recently. Is it possible to do the Archive and Install from my Intell Powerbook which is running the same version software. I've tried it several times, inserting the iMac install disk on my PB with my iMac connected in Target Disk mode, but I keep getting the message that the software can't be installed on this computer (the PB). Is there another way I can perform an A&I, I don't have enough space on my iDisk to use SuperDuper to create a disk image. I'm almost at the panic stage here since I use my computer for work and I'm afraid it won't start up at all at some point.
I've performed all the usual steps, repair permissions and used Disk Utility on my Firewire connect PB to repair the disk. One odd thing is FontExplorerX all of a sudden quit on me two days ago (which has never happened in the 4 years I've used it) and told me to download it again, which I did.
Message was edited by: e. jonesHi e. jones, and a warm welcome to the forums!
Other way around, with the iMac's Install Disc in the PB, boot the PB into T mode, boot the iMac with the Option key held down, wait for the Install Disk in the PB to show up as a boot option on the iMac.
But I think you have more serious problems. And, first you need to move some things off the iMac to make room for an A&I, you really need an external FW Drive right away. -
Kernel panics on startup on a MB late 2008
Hi everyone.
After reading dozens of threads about kernel panics I couldn't find any appropriate post.
So you see, I've got a unibody MacBook late 2008 and as the thread name states I'm experiencing kernel panics on startup. The weird thing is, these panics occur totally random and I can't induce them. Usually I have an apple keyboard, apple mouse and a WD 1TB drive (TimeMachine backup) connected via USB plus an external monitor and magsafe power. Even after disconnecting all that stuff I receive kernel panics.
I haven't had any kernel panic during normal operation so far. As soon as I get the system up and running nothing happens. They just keep coming every second or third startup.
There are 9 crash reports in my L/Logs/Diag.Reports. You can see the last kernel panic report here:
Tue Jan 22 16:00:04 2013
panic(cpu 0 caller 0xffffff80102b7bd5): Kernel trap at 0xffffff7f9124f578, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80f1c3e000, CR3: 0x0000000012eae000, CR4: 0x0000000000000660
RAX: 0x00000000164aae3d, RBX: 0x01ffff8022416000, RCX: 0x0000000080a4a2ab, RDX: 0x0000000000000000
RSP: 0xffffff80f7443e50, RBP: 0xffffff80f7443e60, RSI: 0x0000000000000002, RDI: 0xffffff8010801ef0
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8022416000, R13: 0xffffff8022038100, R14: 0xffffff80223d6100, R15: 0x0000000000000001
RFL: 0x0000000000010246, RIP: 0xffffff7f9124f578, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80f1c3e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f7443af0 : 0xffffff801021d626
0xffffff80f7443b60 : 0xffffff80102b7bd5
0xffffff80f7443d30 : 0xffffff80102ce4ed
0xffffff80f7443d50 : 0xffffff7f9124f578
0xffffff80f7443e60 : 0xffffff801063181b
0xffffff80f7443ea0 : 0xffffff801063133e
0xffffff80f7443f30 : 0xffffff801062d2d0
0xffffff80f7443f70 : 0xffffff8010631e99
0xffffff80f7443fb0 : 0xffffff80102b26b7
Kernel Extensions in backtrace:
com.apple.driver.AppleUSBOHCI(5.2.5)[1C94C4BC-B05C-36D4-B1A2-B0BE04A5C620]@0xff ffff7f9124e000->0xffffff7f91260fff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910f8000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f908af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000010000000
Kernel text base: 0xffffff8010200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 1060195299
last loaded kext at 357954763: com.apple.driver.XsanFilter 404 (addr 0xffffff7f91ea4000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0I'm not an expert at reading panic logs but nothing you posted jumps out at me. Since you still get the panics with everything disconnected I would try repairing your hard drive with Disk Utility and reinstalling Mountian Lion.
-
MacBook 2.1 Kernel Panic on startup
Hi, Guys! I have a macbook that sometimes goes in Kernel panic at startup
I need to power of the the mac pressing the power button for some seconds, after this it boot normally...
this is the log of kernel panic:
Interval Since Last Panic Report: 11836 sec
Panics Since Last Report: 4
Anonymous UUID: 4F66CF62-080B-44E4-906F-5CDFA05FB6CA
Thu Jan 31 13:37:42 2013
panic(cpu 1 caller 0x2aaeab): Double fault thread:0x4ca3000, trapno:0x8, err:
0x0, registers:
CR0: 0x8001003b, CR2: 0x04b08da8, CR3: 0x008d6000, CR4: 0x00000660
RAX: 0x00007fff8ab11190, RBX: 0x00007fff8ab11190, RCX: 0x00007fff8ab11191,
RDX: 0x0000001000000000
RSP: 0xffffff9004b08db8, RBP: 0x00007fff5fbfd940, RSI: 0x000000110002e3ed,
RDI: 0x000000110002e3ed
R8: 0x000000110002e3ed, R9: 0x00007fff5fbfdab8, R10: 0x00007fff5fc404a0,
R11: 0x00007fff8ab261e0
R12: 0x00007fff5fc43dc8, R13: 0x00007fff5fc43be8, R14: 0x00007fff5fbfdab8,
R15: 0x00007fff5fbfdab8
RFL: 0x0000000000010093, RIP: 0xffffff80002c0c20, CR2: 0xffffff9004b08da8
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2fbaef78 : 0x21b837 (0x5dd7fc 0x2fbaefac 0x223ce1 0x0)
0x2fbaefc8 : 0x2aaeab (0x59de64 0x59e0df 0x4ca3000 0x8)
0x2fbaf0b8 : 0x2a29d2 (0x0 0xf 0x2e3ed 0x11)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbfd940
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3
~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 13280777169
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2 - last loaded 13191053663
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleLPC 1.5.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AirPort.Atheros21 425.14.7
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleIntelGMA950 6.3.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.3.6
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 201.6
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2
GHz, 2 GB, SMC 1.13f3
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HCC543225A7A380, 232,89 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b,
0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205,
0x7d100000 / 2So I just ran Apple Hardware Test and first two attempts get code:
4SNS/1/40000000: TB0T
Anybody? Logic Board?
And on a third attempt:
4VDC/1/40000003: VideoController -
Recurring Kernel Panic on startup, pls advise
Can I get some advice on how to diagnose a persistent kernel panic on startup?
About this Mac
Version 10.4.11
Processor: 1.67GHz PowerPC G4
Memory: 1.5GB DDR SDRAM
(PowerBookG4)
panic(cpu 0 caller 0x002E1EC4): Unable to find driver for this platform: "PowerBook 5.7".
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0X00095A10 0X00026898 0X002E1EC4 0X002C12A0 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernel version
Darwin Kernel Version 8.11.0: Wed Oct 18 10:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
No debugger configured - dumping debug iformation
MSR = 00001030
Latest stack backtrace for cp 0:
Backtrace:
0x000954F8 0X00095BF8 0X002E1EC4 0X002C12A0 0X002C1068 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernal version:
Darwin kernel version 8.11.0: Wed Oct 10 15:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: we are hanging here...
-The PowerBookG4 starts up when selecting the local hard disk via Startup Manager (press and hold Option key); PowerBookG4 starts up when inserting the install disk 1 and selecting the local hard disk via Startup Manager (press and hold C key); PowerBookG4 starts into safe mode (press and hold Option+Shift keys).
I have verified and repaired disk permissions and the disk itself. This behavior occurs consistently with or without external devices connected.
I can work in my applications ok and everything appears to function as expected once I get the PowerBookG4 booted, but I am concerned about how long it may continue to function - got a lot to do!
Advice? very appreciated thank you! -ben
Message was edited by: Bendervish
Message was edited by: BendervishUnderstanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. Since you've disconnected external devices, USB & Firewire don't appear to be a problem. Are you using an external mouse?
Have you added RAM recently? To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
Look at 12-Step Program to Isolate Freezes and/or Kernel Panics
Cheers, Tom -
Macbook pro kernel panic cant startup please help..please!
MY MAC BOOK pro just had a kernel panic for no apparant reason, happened after i installed the new itunes, and then i got the weird white letter on black screen that said kernel panic among other things. sometimes i cant even get that, after the grey apple the screen goes blank
1. im in sweden and they said at the apple care place there is a 3 week wait, which is unreal.
2. how likely is it that i lost my data?
3. i dont have my install disc, is there any advice anyone can give me?You can get replacement System Install & Restore CD/DVDs from Apple for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
Since you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html -
Issue after kernel panic from update! Please help
Is anyone having issues with their computer after doing the reinstall? I too had the same problem yesterday as thousands of other people had. Took me 9 hours to reinstall lion. I was very happy when I realized I didn't lose all my data. (Guess I learned my lesson on backups) My problem is: Today after my computer is working again is is so stinking slow..... Im talking it has been 15 minutes to load the new mac commercial (30 second ad, on apple.com) In that 15 minutes it has only loaded 20 seconds of it. It is still trying to load the rest so I can stream it? I have never had an issue with speed. It is taking me nearly 4-5 minutes for every email I click just to pull up and read it. Something is wrong? I know it isn't my internet, we have 3 other computers in the house that work the way they always have. My laptop has always been the fastest of them all. I need help! Anyone have any suggestions? Is is possible if the update damaged the flash drive or something? All I know after 9 hours computer loss yesterday and my computer taking all day today to answer a few lousy emails is killing me, I need a solution. I have tried cleared the cache and reset safari with no luck.
Please advise...HI Chris,
Kernel panics are sometimes causes by hardware issues. Probably a good idea at this point to check the boot disk for errors.
Open Disk Utility, in the Utilities folder in the Applications folder.
Select your disk, and click First Aid.
Click Verify Disk.
If the disk needs repairs, do one of the following:
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Checking a hard disk to see if it’s going to fail
You can check the health of your hard disk by checking its Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) status in Disk Utility. Most disk drives include S.M.A.R.T. hardware. Developed by IBM, S.M.A.R.T. hardware allows hard disks to test themselves for potential problems.
Starting up in “safe mode” may help you to diagnose problems you’re having with your computer.
To start up in safe mode:
Shut down your computer and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after your hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart the computer normally without holding down any keys during startup.
More help here resolving kernel panics; http://www.thexlab.com/faqs/kernelpanics.html
If the boot disk appears to be ok, you could try installing the 10.5.6 combo update available here;
http://support.apple.com/downloads/MacOS_X_10-5-6_ComboUpdate
About the Mac OS 10.5.6 update
Carolyn
Maybe you are looking for
-
In portal it shows both status in bex it shows current
Hi experts, Can anyone please tell me when i run sales order report it shows (current)Booked status in BW(BEX) but in portal it shows open and Booked status(it should show only Booked status).Thanks
-
My computer has crashed several times since I bought my first ipod in 2005. Recently, it crashed so badly that my fella who fixed it just wiped everything off it and reinstalled things. I have a new ipod now and just got my computer back. I log in
-
I would like to use my iCloud drive as a sort of long term storage for photos. Storage that is outside of the house in the event something happens and all my storage in the house is wrecked. The problem I'm running into is that every time I move a
-
How to get User Id in every window title bar at runtime
Hi people How can i get Userid in the window title bar at runtime prasanth a.s.
-
Task List Access Manager Role in Shared Services
Hi The documentation says this role "Assigns task lists and tasks to other users". I have assigned this role to a group (in Shared Services), I have given that group Manage and Assign access to the Task List (in Planning), and have even done a securi