Key Detection
Hi,
I'm trying to figure out what the key of a piano loop is. A while back, I was able to do this with Audition 3 but can't remember how I did it. I'm using Audition CS6 now, so any help on finding out what the key of a piano loop (or violin/choir/guitar/bassline/etc loops too)
Thanks,
Mike
Thanks for the response.
I can't seem to find something in the manual pitch correction effect that will tell me what key the sound loop is in. Is there a step by step process you could give me? Or is there some other program that can detect the key of a loop and if there is could you tell me how to do it?
Thanks,
Mike
Similar Messages
-
IsKeyDown - Multiple key detection ?
does anyone know of how to read two keys or check two keys are down/pressed?
I am trying to do a game where the object can mover diagonally so i need the game to react differently if 2 cursor keys are down?
Any ideas about the isKeyDown() function?
The keypressed/ keyreleased function i think will only detect one at a time.
cheers allTry this quick Swing App I knocked up using Sun One. It shows multiple key detection, doesn't mind simultaneous key presses.
I wrote the code for clarity more than anything else.
Run it, see what it does and how it reacts to the cursor keys being pressed.
* KeyEvents.java
* Created on 05 December 2002, 16:21
package andy.apps.KeyEvents;
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
public class KeyEvents extends javax.swing.JFrame {
/** Creates new form KeyEvents */
public KeyEvents() {
initComponents();
upPanel.registerKeyboardAction(new UpOnListener(), KeyStroke.getKeyStroke(KeyEvent.VK_UP, 0, false), JComponent.WHEN_IN_FOCUSED_WINDOW);
upPanel.registerKeyboardAction(new UpOffListener(), KeyStroke.getKeyStroke(KeyEvent.VK_UP, 0, true), JComponent.WHEN_IN_FOCUSED_WINDOW);
downPanel.registerKeyboardAction(new DownOnListener(), KeyStroke.getKeyStroke(KeyEvent.VK_DOWN, 0, false), JComponent.WHEN_IN_FOCUSED_WINDOW);
downPanel.registerKeyboardAction(new DownOffListener(), KeyStroke.getKeyStroke(KeyEvent.VK_DOWN, 0, true), JComponent.WHEN_IN_FOCUSED_WINDOW);
leftPanel.registerKeyboardAction(new LeftOnListener(), KeyStroke.getKeyStroke(KeyEvent.VK_LEFT, 0, false), JComponent.WHEN_IN_FOCUSED_WINDOW);
leftPanel.registerKeyboardAction(new LeftOffListener(), KeyStroke.getKeyStroke(KeyEvent.VK_LEFT, 0, true), JComponent.WHEN_IN_FOCUSED_WINDOW);
rightPanel.registerKeyboardAction(new RightOnListener(), KeyStroke.getKeyStroke(KeyEvent.VK_RIGHT, 0, false), JComponent.WHEN_IN_FOCUSED_WINDOW);
rightPanel.registerKeyboardAction(new RightOffListener(), KeyStroke.getKeyStroke(KeyEvent.VK_RIGHT, 0, true), JComponent.WHEN_IN_FOCUSED_WINDOW);
class UpOnListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.upPanel.setBackground(Color.black);
class UpOffListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.upPanel.setBackground(Color.white);
class DownOnListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.downPanel.setBackground(Color.black);
class DownOffListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.downPanel.setBackground(Color.white);
class LeftOnListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.leftPanel.setBackground(Color.black);
class LeftOffListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.leftPanel.setBackground(Color.white);
class RightOnListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.rightPanel.setBackground(Color.black);
class RightOffListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
KeyEvents.this.rightPanel.setBackground(Color.white);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
upPanel = new javax.swing.JPanel();
leftPanel = new javax.swing.JPanel();
downPanel = new javax.swing.JPanel();
rightPanel = new javax.swing.JPanel();
getContentPane().setLayout(new java.awt.GridLayout(2, 2));
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
upPanel.setBorder(new javax.swing.border.TitledBorder("Up"));
upPanel.setBackground(new java.awt.Color(255, 255, 255));
getContentPane().add(upPanel);
leftPanel.setBorder(new javax.swing.border.TitledBorder("Left"));
leftPanel.setBackground(new java.awt.Color(255, 255, 255));
getContentPane().add(leftPanel);
downPanel.setBorder(new javax.swing.border.TitledBorder("Down"));
downPanel.setBackground(new java.awt.Color(255, 255, 255));
getContentPane().add(downPanel);
rightPanel.setBorder(new javax.swing.border.TitledBorder("Right"));
rightPanel.setToolTipText("null");
rightPanel.setBackground(new java.awt.Color(255, 255, 255));
getContentPane().add(rightPanel);
pack();
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
* @param args the command line arguments
public static void main(String args[]) {
new KeyEvents().show();
// Variables declaration - do not modify
private javax.swing.JPanel upPanel;
private javax.swing.JPanel leftPanel;
private javax.swing.JPanel rightPanel;
private javax.swing.JPanel downPanel;
// End of variables declaration
} -
Hot key detection in a near cache?
I found this example to detect hot keys in a distributed cache server:
http://wiki.tangosol.com/pages/viewpage.action?pageId=16686
How would I accomplish the same thing but for a near cache?
thanks
samHi,
NamedCache coherenceCache = CacheUtils.getNamedCache( CacheUtils.getCacheRegionPrefix() + region.getRegionName() );
if (coherenceCache instanceof NearCache)
NearCache nearCache = (NearCache)coherenceCache;
CachingMap cachingMap = (CachingMap)nearCache;
Map backingMap = cachingMap.getBackMap();
OR
Map backingMap = nearCache.getBackMap();
getFrontMap() and getBackMap() are methods from CachingMap.
Thanks & Regards,
Murali.
============ -
I have a JSpinner implemented in a JTable. The spinner is implemented as a table cell renderer, with a matching custom editor.
JTable implementation.....
table_Shots.getColumnModel ( ).getColumn ( i ).setCellRenderer ( new ToHoleColumnRender() );
table_Shots.getColumnModel ( ).getColumn ( i ).setCellEditor(new ToHoleColumnEditor( ));
renderer class definition....
class ToHoleColumnRender extends JSpinner implements TableCellRenderer
editor class defintion....
class ToHoleColumnEditor extends AbstractCellEditor implements TableCellEditor
The spinner implements a custom model which dynamically displays distance as either "nyds", "nft" or "nft nin".
The user would like to have the spinner change the display from 'nft nin' to just 'nft' by pressing the shift key. Therefore, there is a need to detect the shift key by the spinner.
Following the advice in this forum in other posts, I tried a keyListener on the textfield from the editor, code:
JSpinner.DefaultEditor editor = (JSpinner.DefaultEditor) getEditor();
JComponent textField = editor.getTextField();
textField.addKeyListener(new MyKeyListener());
but to no avail, i.e. keystrokes were not detected when pressing the key and then the spinner control. I also tried putting the KeyListener on the spinner with the same results. Can anyone advise on how to get keystrokes to the spinner in the jtable?
Thanks
LouThanks for the response.
I can't seem to find something in the manual pitch correction effect that will tell me what key the sound loop is in. Is there a step by step process you could give me? Or is there some other program that can detect the key of a loop and if there is could you tell me how to do it?
Thanks,
Mike -
this question came across my mind now, i didn't look up the answer quite well i'm afraid.
considering the fact that 2 different keys were used to sign the jars of one application, does JWS checks/warns/detects this or does it pass uncaught ?
This could be a normal behavior ( ie. it's acceptable to have the case ) but i have not come across such a situation so far and i have not had the time to test as i do not have 2 keys handy right now but i will as soon as i have time though._steve wrote:
i need a bit of clarification coz my question was not so clear i'm afraid,sorry.
considering the fact that 2 different keys were used to sign the jars of one application, does JWS checks/warns/detects this or does it pass uncaught ?so let me reform.With this i did not mean like sign your jars 2 times in a row with 2 different keys, i meant sign some of the jars with one key and the rest with the other one.
I'm also referring to "key" and "certificate" as one same entity, that's irrelevant to the main issue i guess, but just for clarification...
I'm trying to understand the security risks i might face.Yes, that's like I understand you: having some of the jars signed by cert A and some signed by cert B. This is not allowed by web start. However, you can make use of "extensions" to include jars and resources which are signed by a different cert, e.g. third party jar files. -
Hi,
Example:
I have a clean vocal and drag that vocal into Melodyne, it can then tell me what key it thinks that vocal has been sung in, can Flex Time do this?
Many Thanks
Simon.Thanks for the response.
I can't seem to find something in the manual pitch correction effect that will tell me what key the sound loop is in. Is there a step by step process you could give me? Or is there some other program that can detect the key of a loop and if there is could you tell me how to do it?
Thanks,
Mike -
After BIOS update failure and rollback, audio hot keys detect press but do not function
All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
I can press the key and the vertical volume indicator displays but it does not move.
At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
All HP drivers and software are updated to latest.
Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo. Will warrant further watching.
The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization).
TIA,
Tony
BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
The current running BIOS is F.63
The full results follows
HP ENVY TS 17 Notebook PC
5CG3331YPX
E9G82UA#ABA
Windows 8 64-bit
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
12GB
4GB Micron Technology 1600MHz
8GB Hynix 1600MHz
Intel(R) HD Graphics 4600
1920 x 1080
60
1965 KBC Version 93.51
F.63
IDT High Definition Audio CODEC
Bluetooth Hands-free AudioSeems after another day,
The problem resolved itself.
No reboot, no significant changes to the machine I can think of since my original post.
Just a spontaneous self-fix.
Thx,
Tony -
Is there a way to listen if a certain key, such as the up arrow key, has been pressed in a console window?
http://sourceforge.net/projects/javacurses/
-
2 part question - loading and key detection...
Hi,
I have an issue with a function. I have been developing my first AS3 application and everything was running smoothly until I added a second frame. I had this code on frame 1, which was working perfectly:
function keyDetection() {
stage.addEventListener(KeyboardEvent.KEY_DOWN, showRevisionWindow);
function showRevisionWindow(keyEvent:KeyboardEvent) {
var modifier:String="";
var keyPressed:String="";
keyPressed=keyEvent.keyCode.toString();
if(keyEvent.ctrlKey && keyEvent.keyCode == 192){
if (revisionAuthorWindow.visible == false){
revisionAuthorWindow.visible = true;
revisionAuthorWindow.x = 256;
revisionAuthorWindow.y = 192;
}else{
revisionAuthorWindow.x = -300;
revisionAuthorWindow.y = -300;
revisionAuthorWindow.visible = false;
keyDetection();
I moved the code to frame 2, added a loader function to frame 1, and now when I enter frame 2, I recieve this message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at SIMmersion_frontEnd_prototype_menu02_loadingTest_fla::MainTimeline/keyDetection()
at SIMmersion_frontEnd_prototype_menu02_loadingTest_fla::MainTimeline/SIMmersion_frontEnd_pr ototype_menu02_loadingTest_fla::frame2()
However, if I move this code back to frame 1, or comment out my loader function on frame 1 and go directly to frame 2, I will not receive the error.
Here is the loader code I am currently using on frame 1, while the code above is currently on frame 2:
stop();
var loader : Loader = new Loader();
var request : URLRequest = new URLRequest("myFile.swf");
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, updateProgress);
loader.load(request);
function updateProgress(event : ProgressEvent) : void
var pI = event.bytesLoaded/event.bytesTotal*100;
trace ("pI = " + pI + "%");
preLoader.pLoader.width = pI*5 ;
var pI_int:int = event.bytesLoaded/event.bytesTotal*100;
preLoader.pIInt.text = "Loaded: " + pI_int + "%";
if (pI_int==100){
preLoader.visible = false;
gotoAndStop(2);
}else{
preLoader.visible = true;
gotoAndStop(1);
If anyone could shed some light on why this happening, I would be very appreciative.
Also, how do you use a URLRequest to reference 'itself'. Instead of using "myFile.swf", I want to reference the Flash file itself without having to indicate a name of the Flash file to load. is that possible?
var request : URLRequest = new URLRequest("myFile.swf");
something along the lines of:
var request : URLRequest = new URLRequest(this);
Thanks in advance; I know this is a long-winded question.
Cheers,
~ChipNo replies. Eric
-
Office 2013 license pack does not allow me to activate key within configuration wizard
Hello,
I have a KMS host running Office 2010 activations for our client computers which is running fine. I installed the Office 2013 license pack on the same host. However, in the configuration wizard it doesn't allow me to activate the product key. Is there
a way around this?
My client laptop isn't activating against the KMS host, and I have Office 2013 installed on my laptop. This is what I get when I run
cscript ospp.vbs /act on my client laptop
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd c:\
c:\>cd program files
c:\Program Files>cd microsoft office
c:\Program Files\Microsoft Office>cd office 15
The system cannot find the path specified.
c:\Program Files\Microsoft Office>cd office15
c:\Program Files\Microsoft Office\Office15>ospp.vbs /act
c:\Program Files\Microsoft Office\Office15>cscript ospp.vbs /act
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
Installed product key detected - attempting to activate the following product:
SKU ID: b13afb38-cd79-4ae5-9f7f-eed058d750ca
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
Last 5 characters of installed product key: 92CD4
ERROR CODE: 0xC004F038
ERROR DESCRIPTION: The Software Licensing Service reported that the product coul
d not be activated. The count reported by your Key Management Service (KMS) is i
nsufficient. Please contact your system administrator.
---Exiting-----------------------------
c:\Program Files\Microsoft Office\Office15>Hi,
Please check if your KMS host key for Office 2013 is valid and you can try to activate the KMS host by telephone.
To get the key for the Microsoft Office 2013 KMS, sign in to Microsoft Volume Licensing Service Center.
On this page, don’t choose the Key Management Service Host Key. Choose the Office version you are licensed for instead, and look for the KMS key for that version.
http://technet.microsoft.com/en-us/library/dn385356.aspx
To activate an Office KMS host by telephone
http://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_ToactivateanOfficeKMSbytelephone
KMS activation of Office 2013
http://technet.microsoft.com/en-us/library/ee624357.aspx
If issue persists, it is recommended to post the question in Office forums for further troubleshooting.
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro&filter=alltypes&sort=lastpostdesc
Hope this helps.
Jeremy Wu
TechNet Community Support -
Is it possible for Apple to add "key" to the view options selection?
Is it possible for Apple to add "key" to the view options selection?
DJ1970, Unfortunately no. iTunes does not have the key in the database.
People who want to know the key of a song can use (unless they already have perfect pitch!) key detection software such as Mixmeister.
Once you know the key, iTunes does not even have a field to store it, although you could stick it into Comments or some other unused text field such as Grouping. These fields are indeed viewable in iTunes. -
Missing Primary Keys after migartion of a MSAccess 2003 DB to oracle 9.i
I migrate a MS Access 2003 DB to Oracle 9.i with the Oracle Migration Workbench 10.1.0.4.0. on a Windows 2k PC. All the Primary Keys of my tables are missed after migration and no Foreign Key is created.
In the MS Access Source Model Window of OMWB are the Primary Keys detected but in migration script or in oracle db after migration there is no Primary Key applied.
Dos anyone kows the reason for this behavior.
Thanks for help in advance.
Message was edited by:
user468547
Message was edited by:
user468547Here the summary of the Model.
Not mentioned parts are sero in the Oracle Model
MS Access Source Model
Table Violation Rules (0)
Relations ( 48)
Indexes (96)
Primary Keys (38)
Queries (0)
Tables (38)
Oracle Model
Database (1)
Check Constraints (0)
Foreign Keys (48)
Indexes (96)
Primary Keys /Unique ... (0)
Tables (38)
Types (2)
In the migration scripts the commands for creation of Foreign Keys are avaliable and delievers the error message ORA-02270. e.g.
REM
REM Message : Failed to create foreign key: dbwines.TBL_SERVICEPROFILESTBL_UETYPES; ORA-02270: no valid Primr- o. eindeutiger Key for this column
Here the content of the error.log
** Workbench Repository : Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Repository Connection URL: jdbc:oracle:thin:@pcathlon17002:1521:ORCL
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Active Plugin : MSAccess
oracle.mtg.migration.MigrationSQLException: Failed to get information about Oracle Model Object.
Erschpfte Ergebnismenge:Failed to get information about Oracle Model Object.
Erschpfte Ergebnismenge
at oracle.mtg.oracleModel.server.OracleModelImpl.getObjectInformation(OracleModelImpl.java:476)
at oracle.mtg.oracleModel.ui.OracleModelTypes.getAllChildren(OracleModelTypes.java:95)
at oracle.mtg.plugin.ui.WorkbenchAllTreeNode.getChildren(WorkbenchAllTreeNode.java:133)
at oracle.mtg.migrationUI.TreeDataSource.getItemCount(TreeDataSource.java:128)
at oracle.ewt.dTree.DTreeDeferredParent.getItemCount(Unknown Source)
at oracle.ewt.dTree.DTreeBaseItem.isExpandable(Unknown Source)
at oracle.ewt.dTree.DTreeButtonDecoration.getHasButton(Unknown Source)
at oracle.ewt.dTree.DTreeButtonDecoration.paintDecoration(Unknown Source)
at oracle.ewt.dTree.DTreeStackingDecoration.paintDecoration(Unknown Source)
at oracle.ewt.dTree.DTree.paintCanvasInterior(Unknown Source)
at oracle.ewt.EwtComponent.paintInterior(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter._paintInterior(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.EwtComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.EwtComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.EwtComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.EwtComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.EwtComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.LWComponent._paintComponent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.paint(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paintExtents(Unknown Source)
at oracle.ewt.lwAWT.SharedPainter.paint(Unknown Source)
at oracle.ewt.lwAWT.BufferedApplet.paint(Unknown Source)
at oracle.ewt.lwAWT.BufferedApplet.update(Unknown Source)
at sun.awt.RepaintArea.paint(Unknown Source)
at sun.awt.windows.WComponentPeer.handleEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
** Shutdown : Mon Apr 10 18:36:10 CEST 2006
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: C:\oracle\ora92\omwb
** user language: de
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Mon Apr 10 18:36:14 CEST 2006
** Workbench Repository : Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Repository Connection URL: jdbc:oracle:thin:@pcathlon17002:1521:ORCL
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Active Plugin : MSAccess
EXCEPTION : query()java.sql.SQLException: Stream wurde schon geschlossen
select MESSAGE_TYPE, LOG_ID, TO_CHAR(LOG_DATE, 'dd-MM-yyyy hh24:mi:ss') LOG_DATE, PROJECT_ID, PHASE, SUBPHASE, LOG_MESSAGE, OBJECT_TYPE, OBJECT_ID, CONTEXT_DATA from MTG_LOG_TABLE WHERE PROJECT_ID = 1 and (MESSAGE_TYPE != 9999) ORDER BY LOG_ID ASC
java.lang.NullPointerException
at oracle.mtg.migration.LogDisplayUtility.convertToDisplayStrings(LogDisplayUtility.java:185)
at oracle.mtg.migrationServer.LoggingImpl.getLogs(LoggingImpl.java:482)
at oracle.mtg.migrationUI.LoggingPane.setupLogTable(LoggingPane.java:291)
at oracle.mtg.migrationUI.LoggingPane.setupLogTable(LoggingPane.java:280)
at oracle.mtg.migrationUI.ProgressDialog.commandStarting(ProgressDialog.java:117)
at oracle.mtg.migrationUI.MigrationUI.commandStarting(MigrationUI.java:2427)
at oracle.mtg.migrationUI.MigrationWizard.doMigrate(MigrationWizard.java:401)
at oracle.mtg.migrationUI.MigrationWizard.runDialog(MigrationWizard.java:293)
at oracle.mtg.migrationUI.ActionMenuHandler._migrate(ActionMenuHandler.java:340)
at oracle.mtg.migrationUI.ActionMenuHandler._capture(ActionMenuHandler.java:291)
at oracle.mtg.migrationUI.ActionMenuHandler.run(ActionMenuHandler.java:85)
at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
** Workbench Repository : Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Repository Connection URL: jdbc:oracle:thin:@pcathlon17002:1521:ORCL
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Active Plugin : MSAccess
Thaks for help in advance
Regards Steffen -
Key.isDown / getAscii() problems
I'm having some trouble detecting keypresses.
Woking with the arrow keys works fine, but using getAscii() is having problems.
I tried using:
if (getAscii(100)) {//do stuff;};
but the issue is that once you press a key, getAscii() keeps returning the value of the last key pessed even after you stop pessing it.
I tied using a keyDown listener, instead of onEnteFame and couldn't get it to work at all.
I tried searching these foums, but some of the solutions had all the code deleted... odd.
How do I add the ability to add key detection for the other keyboard keys to this code?
xspeed = 0;
yspeed = 0;
this.onEnterFrame = function() {
if (Key.isDown(Key.LEFT)) {
xspeed += -3;
if (Key.isDown(Key.RIGHT)) {
xspeed += 3;
if (Key.isDown(Key.UP)) {
yspeed += -3;
if (Key.isDown(Key.DOWN)) {
yspeed += 3;
xspeed *= .8;
yspeed *= .8;
if (Math.abs(xspeed) < 1) {xspeed = 0;};
if (Math.abs(yspeed) < 1) {yspeed = 0;};
if (xspeed <> 0 or yspeed <> 0) {
_root.Map._x += xspeed;
_root.Map._y += yspeed;
(The code has a few exta lines to make the accelleration nice and smooth.)try this:
//////////********KEY LISTENER*************************
delete keyListener;
Key.removeListener(keyListener);
keyListener = new Object();
keyListener.onKeyDown = function() {
code.Key.getAscii();
trace(Key.getAscii());
if (Key.getAscii() == 97) {
trace("A hit");
///*************spacebar *********************
if (Key.isDown(32)) {
trace("space bar pressed");
////*********CONTROL J***********************
if (Key.isDown(Key.CONTROL) && Key.getCode() == 74) {
trace("CONTROL J");
////********* p ***********************
if (Key.isDown(112)) {
trace("p");
////********* q ***********************
if (Key.isDown(113)) {
trace("g");
////*********F1***********************
if (Key.getCode() == 112) {
trace("F1");
Key.addListener(keyListener);
Important:
Always remember to remove your listener before calling on it again.Most of the time I place it on a frame the user can NOT return to, because it will keep adding listeners and you can easly build up hundreds of them. So remeber to remove it before calling it again...just like the above code does already. -
Issues with 10.3.1.1581 on Z10 STL100-3
Since I updated I have a couple of issues I haven't read about anyone else having.
1) The display is by default in a zoom mode. Every time I wake it up i have to shrink the screen for it to appear proper size. It does this in a lot of the apps and in Hub too. And a few times I couldn't even zoom out to normal size and had to slide the screen around to find what I wanted.
2) The touchscreen keyboard seems to be out of calibration. Several keys near the perimeter of the screen you have to touch at the very inside edge of the key for it to work, resulting in having to press those letters sometimes 3 and 4 times to get it to work.
Has anyone else had these issues?
Solved!
Go to Solution.Hi @George1971
If possible please turn off magnify mode - to do this, go to Settings > Accessibility and toggle the Magnify Mode switch
After doing this, test the keyboard and let me know if you are still having trouble with key detection. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog -
Issues with counters 3 and 4 on PCI-6601
Hi All,
I am using counters 1-4 on the PCI 6601 card with NI-DAQmx 8.0 to generate continuous pulses in Labview 8.0. After I configure the counters, I can see the pulses going out on a scope. If I then configure other DIO lines as digital outputs, the pulses on counter 3 and 4 goes away. Counter 1 and 2 is still okay. Has anyone seen this before. Somehow the configuration on counter 3 and 4 is changing when I try to configure other DIO lines as outputs? For configuration of continuous pulses I am using the Pulse Train Gen.vi from the DAQmx PWM Examples.zip folder from NI website minus the while loop and the DAQmx clear Task.vi. The Pulse Train Gen.vi include DAQmx Create Channel(CO-Pulse Generation Frequency).vi, DAQmx Timing(Implicit).vi, DAQmx Start Task.vi, and DAQmx Is Task Done.vi. For digital outputs I am using DaQmx Write(Digital Bool 1 Line 1 Point). Any suggestions as to why counter 3 and 4 configuration changes and not counter 1 and 2. I need to have these counter going before I configure output lines.Hi @George1971
If possible please turn off magnify mode - to do this, go to Settings > Accessibility and toggle the Magnify Mode switch
After doing this, test the keyboard and let me know if you are still having trouble with key detection. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog
Maybe you are looking for
-
Trying to understand advantages of Apple TV
My setup: Multiple family members have iphones and Ipads. We share the same iTunes account. We use iCloud Match to share iTunes purchased and uploaded MP3 files. I have a wireless home network and 2 home entertainment centers in different rooms.
-
Hi there, I have recently lost my iPod in downtown Clearwater Florida. I used Find my iPhone and it kicked in temporarily as the person walked by a Starbucks that was at a mall I've never been to. I locked the device and sent it a message but didn'
-
Programatically change the Date Time series
Is there a way to set Date time series programatically thru Javascript? I have Time dimenson and I have defined a DTS as YTD. Now based upon the selection of the month by end user I need to show YTD numbers in IR? Any idea how do I achieve that? I am
-
MP3 or video files are playing instead of downloading
when iam downloading the videos or mp3 files it starts playing insread of downloading
-
Trying to add usb printer to my airport express.
trying to add usb priinter to my airport express. Using airport utility on my iphone and it only list add wps printer. I see no add USB printer in utility.